eChapters

Introduction

Nitrogen (N) fertilization assured centre stage for enhancing food production in developing countries especially after the introduction of high yielding and fertilizer responsive crop varieties. Almost half of the human population relies on N fertilizer for food production (Ladha et al., 2005), and about 56 percent of the N fertilizer is used for producing rice, maize, and wheat (IFA, 2002). It has contributed an estimated 40% to the increase in per capita food production over the past 50 years (Smil, 2002). However, excess use of chemical N fertilizer may negatively affect surface water, as well as groundwater, and the atmosphere (through leaching and runoff) through volatilization of N (Galloway et al., 2008).

Appendix-'F'    :    Chemical and Industrial Disaster Mitigation
    
Appendix-'G'    :    Emergency Procedure for Handling Chemical Disasters
    
Case Study    :    Bhopal Gas Tragedy 1984

Abstract

The present study deals with the slope instability analysis of a vulnerable stretch of 16 km between Pratapgarh road intersection and Mahabaleshwar town, which is a part of the state highway-72, Satara district, Maharashtra, India. The highway remains closed during the monsoon seasons, due to the recurrent instances of cut slope failures. So the present research work was conducted with an aim to study the reasons, extent and mechanism of the cut slope failures along the road sections as well as optimization of tools for the assessment of road cut stability of the area. The 16 km stretch was divided into seven vulnerable sections (M1; near Mahabaleshwar - M7; near Poladpur) based on the geological, geometrical and structural attributes. The slope forming mass primarily consists of laterite, weathered basalt and fresh jointed basalt, which are interbedded with red bole at some sections. Limit equilibrium, finite difference and finite element simulation were performed for seven cut slope sections, using similar geometries and material strength attributes for all the analyzing techniques. The assessment was carried out for both dry and saturated conditions to emulate the monsoons. The factor of safety yielded through the limit equilibrium method was the most conservative of all the tools; while the finite element method gave the least conservative figures in terms of factors of safety, being close to the field observations, the safety factor results of finite difference methods were between the limit equilibrium and finite element methods. The cut slope sections composed of weathered basalts and laterites (M1, M2, M3, M6) were found most vulnerable to failure during rains, while the sections composed of fresh jointed basalts (M4 & M5), though overall stable, are susceptible to planar and wedge failures.

Sweet potato, Ipomoea batatas (Linn.) originated in northwestern South America around 8000 - 6000 BC. The plant is a dicotyledonous, herbaceous, trailing vine which is the only economically important member of the family Convolvulaceae. The plant is generally characterised by starchy, succulent and tuberous storage roots; alternating palmately lobed leaves and medium sized sympetalous flowers which grow individually and vary in colour from white to varying degrees of purple (Austin et al., 1991).

Research setting refers to the detail information of an area where the study has been conducted. The study area, generally comprises of a particular geographical area viz. a state, district, block, or gram panchayat area selected according to the convenience of the investigator who possesses adequate knowledge regarding the location, communication facility etc. of the locality so that he/she can easily approach each and every corner of the area for data collection. Here. in this study the data collection was done mostly over telephone based on the interview schedule due to Covid-19 pandemic situation. Besides the investigators must also have the basic knowledge about the socio demographic background of the people so as to have an easy understanding of their knowledge, attitude and behavior. 

1. A plant cell constitutes the_____________ per cent of water. (80-90%)
2. Photosynthesis is the process of conversion of_____________ energy into _____________ energy. (Radiant, Chemical)
3. Dark reaction of photosynthesis occurs in_____________ and light reaction occurs in _____________ region of chloroplast. (Matrix, Lamellae)
4. The connecting link between glycolysis and Kreb’s cycle is_____________. (Pyruvic acid)
5. _____________ is responsible for turgidity of plant cells. (Osmosis)
6. A diffusion of liquids through a semi-permeable membrane is known as_____________. (Osmosis)
7. The diffusion of solvent particles into a living cell is known as_____________. (Endo-osmosis)
8. The diffusion of solvent particles out of a living cell is known as_____________. (Exo-osmosis)
9. The outward pressure exerted by the cell solution on the cell wall which is developed due to osmotic diffusion of water is called as_____________. (Turgor pressure)

Sweet potato, Ipomoea batatas (Linn.) originated in northwestern South America around 8000 - 6000 BC. The plant is a dicotyledonous, herbaceous, trailing vine which is the only economically important member of the family Convolvulaceae. The plant is generally characterised by starchy, succulent and tuberous storage roots; alternating palmately lobed leaves and medium sized sympetalous flowers which grow individually and vary in colour from white to varying degrees of purple (Austin et al., 1991). It is a perennial plant but is grown as an annual by vegetative propagation usually through vine cuttings and sometimes using either storage roots. Its growth habit is predominantly prostrate with a vine system that rapidly expands horizontally on the ground. The types of growth habit of sweet potatoes are erect, semi-erect, spreading and very spreading.

Requirements: Agriculturally important insects of each order

 Orthoptera

 Examples: Grasshopper, cricket, etc.

Metamorphosis: Paurometabolous

Mouthparts: Chewing

 Significance: Variable or Pest

 Characteristics

 •            They are medium to large-sized insects.

 •            Antenna is filiform.

 •            Mouthparts are mandibulate.

 •            Prothorax is large. The pronotum is curved, ventrally covering the pleural region.

•             Hindlegs are saltatorial

 •            Forewings are leathery, thickened and known as tegmina.

 •            They are capable of bending without breaking.

 •            Hindwings are membranous with large anal area.

 •            They are folded by longitudinal pleats between veins and kept beneath the tegmina.

Introduction

India has a long tradition of agroforestry which is widely practiced in all ecological and geographical regions of the country. Traditional agroforestry systems are broadly based on indigenous knowledge and the species are selected as a part of the cultural patterns of the community. The farmers and land owners in different parts of the country integrate a variety of woody perennials in the crop and livestock production systems depending upon the agro-climatic conditions and local requirements.

Development of Agriculture in the World and in India

Agricultural ecosystems will increasingly be called on to deliver food and fiber for a demanding and expanding global population. Until recently, increased production relied on expansion of the amount of land under cultivation and irrigation. Since World War II, production advances have relied on genetics and plant breeding, advances in fertilizer and pesticide use and improved cultural management (Matson et al., 1997). Since 1950, agriculture worldwide has expanded cereal production by an average of 2% per annum while population has increased by 1.9% per year (Borlaug and Dowswell, 1994).

Modern science-based agriculture had its beginnings in the late 19^th century with improved traction and tillage equipments. However, it was not until after World War II that the research findings that led to the modern-day productive systems in the United States and later in European and other developed countries. The expansion was directly related to the great demand for food to support the Allied war effort. Knowledge bases developed in plant genetics, physiology and pathology, along with a ten-fold increase in fertilizer use, advances in seed technology, weed control, irrigation and cultural methods allowed the development of the systems that dominate agriculture in many of the countries today. Corn or maize responded dramatically to the advances in production technology. Maize yield in the United States has increased more than 300 per cent over the past 50 years and continues to rise. Maize production technology has been delivered worldwide (Borlaug and Dowswell, 1994).

“Sustainable Water Resources Management Strategies” embarks on a comprehensive exploration of the paramount challenges and essential solutions for safeguarding our planet’s most precious resource: water. This recognizes that water is not merely a commodity but the very lifeblood of ecosystems, a cornerstone of human health, a critical input for food production, and an indispensable element for industrial progress and societal well-being. Building upon a fundamental understanding of the intricate hydrological cycle, the distribution of global water resources, and the escalating anthropogenic pressures they face, we now turn our attention to the proactive and forwardthinking approaches that define sustainable water resources management. • In an era marked by increasing environmental consciousness and the stark realities of climate change, the traditional paradigms of water management are proving inadequate. Growing populations, rapid urbanization, and the expansion of industrial activities place unprecedented demands on both the quantity and quality of available water. Furthermore, the erratic and often extreme

Introduction

The introduction of high yielding varieties and hybrids in late sixties led to accumulation of insect pest problems in cereals. The varieties and hybrids developed during green revolution era with the sole objective to enhance production to feed increasing population were better in quality parameters than traditional locals but were highly susceptible to insect pests. Over 200 pests attack different cereals and insects that were not known or were of minor importance have now become major pests and several new insect pests have appeared on cereals. Out breaks are frequent due to several obvious reasons. Major pests are serious, perennially occurring and persistent species which cause considerable loss in yields every year in large areas require control measures. Occasional pests attack the crops sporadically but cause potential damage and sufficient loss, though in some localities or only in some seasons, so as to warrant human intervention.

Introduction

Walnut is the oldest cultivated fruit in the world (Ozkan and Koyuncu, 2005). Juglans regia L., the Persian walnut, is probably native to a wide region extending from the Carpathian Mountains across Turkey, Iraq, Iran, Afghanisan and southern Russia to northern India. Species of walnuts, genus Juglans, are found in the forests of the eastern and southern parts of the USA, in Mexico and Central America, the Andean parts of Southern America from Columbia to Argentina, the West Indies, Japan, China, southern Asia from India to Turkey and southern Europe to the Carpathian Mountains of Poland (McGranahan and Leslie,1990). The trees are large and tall with round headed canopy. The rather smooth, light coloured, large nuts are free of the hull at maturity. Shell thickness varies from paper–thin to very thick and hard. The Greeks probably obtained J. regia from Persia from where, the seeds were transported to Rome, where they were known as Jovis Glans, or Jupiter’s acorn, from which comes Juglans. From Italy, it spreaded to what is now France, Spain, Portugal and southern Germany. Trees of the species were in England by 1562, and were bought to America by the earlier settelers. The American colonists are said to have called the species English walnut to distinguish it from the eastern black walnut, J. nigra. It is generally prefer to call it Persian walnut as it is associated with the place of origin bit commercially, it is called as English walnut. The term Carpathian walnut is sometimes used to refer to cold hardy Persian walnuts (Forde and McGranahan,1996). The other important species are J. ailantifolia Carr. syn. J. sieboldiana Maxim. (Japanese walnut), J. nigra L. (American black walnut), J. cinerea L. (butternut), J. microcarpa Berlander (Texus Black walnut), J. major Heller (Arizona black walnut), J. californica S. Wats (Southern California black walnut) and J. hindsii Jeps. (Northern California black walnut).

Theory
The Constitution of India related to women:
    ·    Guarantees to all Indian women equality: Article 14
    ·    No discrimination by the State: Article 15(1)
    ·    Equality of opportunity: Article 16
    ·    Equal pay for equal work: Article 39(d)
    ·    Securing just and humane conditions of work and for maternity relief: Article 42
    ·    The All India Women’s Education Conference was held in Pune in 1927. 
    ·    The National Policy For the Empowerment of Women came was passed in 2001
    ·    In 2010 March 9, Rajya Sabha passed the Women’s Reservation Bill requiring that 33% of seats in India’s Parliament and state legislative bodies be reserved for women

2.1 Introduction

Each step in the food industry system e.g. food production, processing, transportation, storage, distribution and marketing, has some impact on the environment and there is much concern about environmental pollution. Due to the highly diversified nature of the food industry, various food processing, handling and packaging operations create wastes of different quality and quantity, which, if not treated, could lead to increasing disposal problems and severe pollution problems [24]. The preservation of the natural environment from industrial pollution is currently receiving much attention. In food industry, the most important problem is treatment and disposal of large quantities of waste water, a by-product of various processing operations. It is one of the largest industry groups comprising the manufacturing sector of the U.S. economy [47]. Likewise, India is the world’s second largest producer of food next to China, and has the potential of being the largest food processor. The total food production in India is likely to double in the next ten years [22]. Flour and grain; soft drinks and carbonated water; breweries; starch and miscellaneous food products; meat, poultry and fish; tea, coffee and other beverages; fruit juices; animal feed; sugar; distilleries and blending of spirits; cocoa, chocolates and sugar confectioneries; agricultural and food chemicals and industrial packaging are important sub-sectors of the food processing industry. Food processing projects involve the processing and packaging of meat products, fish and shell fish, dairy products, fruit and vegetables, grains and beverages production. It includes refinement, preservation, improvement of product, storage, handling, packaging and canning (Fig. 1). The processing may involve receiving and storing raw or partially processed plant, animal or other food materials, processing the raw materials into finished products, packaging and storing the finished products.

Abstract: Gerberas are popular seed and vegetatively propagated flower crop with numerous phenotypes, series and cultivars available on the world market. Crop improvement is currently focused on bicoloured mini gerbera, semi-double and spider type forms, and hybrid cultivars with expanded colour range to boost productivity and profitability. Application of genetic engineering techniques and tools are aiding in modern gerbera breeding. The need for new cultivars remains strong as production system become more specialized and new markets develop. Breeding objectives with high priority include cut flower cultivars highly resistant to diseases, tolerant to low temperature, and floral longevity.

Introduction

Geostatistics is a branch of statistics that deals with the analysis and modelling of geo-referenced data. Its main aims are to quantify spatial variability and to create maps from point observations. Of course there is much more to geostatistics than just that and indeed some of the other uses of geostatistics are addressed in this chapter too, but the emphasis is on the assessment of spatial variability and geostatistical interpolation.

The first step of geostatistical interpolation is to quantify the spatial correlation structure of the variable of interest. This can be done by examining the observations and how these vary in space. Next spatial interpolation makes use of the quantified spatial correlation to derive optimal predictions at unobserved locations and create a map. The interpolation error is quantified as well, which helps to design optimal spatial sampling schemes that balance data collection costs and map accuracy. All this will be explained in this chapter, but in order to do so we first need to explain the statistical theory that underlies geostatistical interpolation followed by representation of the spatial correlation structure, the basics of geostatistical interpolation (‘kriging’), kriging extensions and spatial stochastic simulation.

Microscope is an instrument to magnify and enable to see the microorganisms by us.

Microscopes are of two types. Light and Electron microscope.

Basic Principles of light microscope

The light is the primary source on which magnification is performed. The magnification is obtained by a system of optical lenses using light waves. These light microscopes can be further classified into

Lignieres and Spitz first isolated Actinobacillus from the cattle with actinomycosis like condition in Argentina in 1902. The findings were also confirmed by Nocard in 1902. Later the isolated bacterium from the cattle was named as Actinobacillus lignieresii in memory of Lignieres.

Pfeiffer (1892) first isolated Haemophilus influenzae as a cause of human influenza and it is also known as ‘Pfeiffer’s bacillus’. Other workers isolated and described different species of the genus Haemophilus from animals and birds. In 1903, Friedberger, a research assistant of Pfeiffer, isolated similar kind of bacteria from prepuce of dogs which was described later as Haemophilus canis. In 1925, Mitchell isolated Haemophilus ovis from the respiratory tract of sheep. Lewis and Shope (1931) isolated and illustrated Haemophilus suis from the infected pigs. Glasser found the association between fibrinous serositis, polyarthritis in pigs (Glasser’s disease) and a small gram-negative rod as early as 1910, later became known as Haemophilus parasuis. The bacteria was first isolated by Hjarre and Wramby in 1943. De Blieck (1931) isolated a hemophilic bacterium from the birds suffering with ‘infectious coryza’ and named the bacteria as Bacillus haemoglobinophilus coryzae gallinarum. Later it became known as Haemophilus paragallinarum (Avibacterium paragallinarum).

In this chapter, the focus is on understanding the importance of experimental design and being familiar with key terminology. You’ll also learn about the three fundamental principles of experimental design and their roles in conducting experiments. Additionally, you’ll learn how to do randomization of treatments in various experimental designs using R.

Experimental Design

Experimental design is the methodical planning of scientific experiments for reliable results by controlling variables and minimizing biases. It serves as the foundation for effective research. Some key definitions to enhance understanding of this concept:

Key terminologies

• Experiment: Structured investigation for knowledge acquisition or validation.

• Experimental unit: Entity receiving treatment (e.g., land plot, pot).

• Treatment: Specific procedure for assessment and comparison.

• Experimental error: Variation among identically treated units.

Principles of Experimental Design

Experiments are vital tools in agricultural research, aiming to assess treatment effectiveness and quantify their impact. However, extraneous factors can confound results. To mitigate these issues, we depend on three core principles of experimental design: replication, randomization, and local control.