eChapters

Introduction

The extension approaches followed in agricultural sector during past decade is reoriented in various occasions and new system of approaches were implemented. The present day orientation is shifting the efforts of extension from production orientation to profit orientation. Under these circumstances, the key factor for success will largely depend upon the extension service provider’s orientation and farmer’s capacity to absorb new knowledge of improved practices and technology. In order to orient officials towards this change HRD is essential. This will help them to impart required competencies in knowledge and skill such as technical, organisational, managerial, communication and business skills.

The present day extension approach i.e. ATMA focusing towards block level planning, farmers participation in planning and implementation of various schemes, group approaches, importance to agri and allied aspects are the major focus of ATMA. The Tamilnadu government in the year 2007 reorganised the extension system in to twotier at district level with the major focus to block level. In each block Agricultural Extension Centres (BAECs) were established which houses for agriculture, horticulture, marketing, agri. engineering departments.

There are two assumptions necessary involved in the regression of repeatability. These are:
• The variances of the different measurements are equal and have their components in the same proportions, and
• The different measurements reflect genetically the same character. If these assumptions are not valid the repeatability concept becomes vague without precise meaning in relation to the variance components.
The repeatability differs very much depending on the following:
• The nature of the trait.
• The genetic properties of the population.
• Environmental conditions under which the individuals are kept or raised.
Repeatability indicates the proportion of observed differences in performance between animals caused by differences in real producing ability. That is say, repeatability of butterfat yield is 0.40, and if a cow has an age corrected butter fat yield of 30 kilograms above the herd average, her near producing ability will be equal to 30x 0.40 = 12 kg. above the herd average. This can also be explained in a different way, i.e., if two cows differ in one lactation by 30 kg in butter fat yield. They will have difference of 12 kg of butter fat in the next lactation.
Repeatability has a value 0 to 1 and may also be expressed in percentage. Repeatability of a trait is not a constant, and measurements error or generally, varying environmental conditions tend to increase VEt and thus to decrease repeatability, shrode et al (1960) have shown the effect of a change in environmental conditions on repeatability. They obtained repeatabilities of milk yield, butter fat yield and fat percentage as 0.37, 0.32 and 0.7 respectively and after improving the management removed some of the environmental variations that had marked the cows real producing abilities.

Introduction

There are a number of estimates of post-harvest losses. The most conservative estimates for the handling losses at about 10 per cent, a quantity good enough to feed at least 60 million people. Storage loss occurs due to quantitative and qualitative damages caused by insects, mites, fungi, rodents, birds, heat, moisture, etc. Several hundred insect species have been reported to be associated with stored grains and milled and processed foods, but some 50 of these species are considered injurious. Under Indian conditions, the most important insect pests of stored grains are Sitophilus oryzae (Rice weevil), Tribolium castaneum (Red flour beetle), Rhizopertha dominica (Lesser grain borer), Callasobruchus spp. (Pulse beetle), etc.

The use of repellents to ward off insects has been a very old practice of mankind. The simple fly swatters, feather dusters, hand fans, mosquito nets etc., are some of the physical repellants still in use. In our own country, mustard oil or turmeric (haldi) water is also used as a mosquito repellent. Fire and smoke are the two oldest insect repellents known to man. To get rid of wasp nests from our dwelling or ward off honeybees during honey extraction, smoke is normally employed. Similarly sandal dhoop is often burnt to purify air (i. e. to ward off insects) in our houses.

Chemicals that prevent insect damage to plants or animals by rendering them unattractive or offensive are called repellents. A more broad-based definition would be: non-poisonous or mildly poisonous chemicals that induce avoiding (oriented movements in insects away from their source. Repellents are more important in the protection of man and his animals from insect attacks than in the protection plants.

In many experimental situations, it becomes necessary to repeat an experiment over time, (for a number of seasons or years). This repetition (or replication) of the experiment broadens the scope of the experiment in the sense that our recommendations will be applicable for a number of seasons. In the case of agricultural experiments, for example, there may be present treatment x season interaction. So the results of a series of experiment, performed for different seasons with the same set of treatments, will have wider applicability.

We shall consider the simplest case of a repetition of experiments of identical structure for a number of seasons. Let us consider randomized block experiments with t treatments in r blocks and conducted in p seasons. The analysis of the experiment in a season is based on the linear model. Before attempting a combined analysis for the p experiments, it is necessary to perform the analysis for p experiments separately and interpret the results separately. It may be of interest to find out whether differences among the treatments are the same in the different seasons so that ‘ best ‘ treatment may be recommended for all seasons or whether different treatments are to be recommended for different seasons.

We next consider the analysis of the combined experiments considering the seasons as a random sample from the population of seasons. Analysis of Variance of series of experiments

ABSTRACT

Immature seeds of Garcinia indica were excised from the green fruits and cultured on Woody Plant Medium (WPM) with a combination of auxins and cytokinins. Somatic embryos were obtained on the media supplemented with BAP (0.5-5.0 mg/l) alone or in combination with NAA 90.5 mg/l) with 80 per cent frequency within a period of 2-3 weeks. Subculture of primary embryos on maturation medium containing BAP (3.0 mg/l) supplemented with IAA (0.5-1.0 mg/l) and / or Kinetin (1.0 mg/l) gave rise to clusters of secondary somatic embryos. In the subsequent subculture on hormone free half strength WPM the embryo clusters germinated with repetitive secondary embryogenesis. About 70 per cent somatic embryos germinated into complete plantlets, which were successfully transferred to the green house conditions.

1.0. Objectives

• To make implication of report writing
• To impart knowledge of different techniques of report writing
• To make out the methods to remove hurdles trying in way of transmitting the information

2.0. Characteristics of a Report

1. Accuracy: An Effective report reflects their purpose. While putting together a report, your investigation, analysis, and recommendations should be directed by this central purpose. Precision gives unity and coherence to your report and makes it a valuable document.

The financial and commercial book keeping that is generally practiced by dairies, the main purpose of which is to ascertain the total results of the business during a given period, does not answer the question whether the costs of processing of milk products and of the various operations involved in manufacturing, are reasonable. For this purpose, dairy plants have to keep detailed records of the expenditure incurred on different components and processes, for planning of production and controlling of costs. In large multi-product dairy plants, production is generally characterized by mixed and joint production and the different operating operations are interrelated. Thus, it becomes difficult to draw a distinction and allocate and apportion the consumption of various services and utilities to arrive at the cost of different operations of various products.
The Bureau of Indian Standards has developed three different sets of records on dairy accounts which may be used to record different information for cost and quality control. These records are:

Abstract

Three-point bend test (three point bend ring-HDP/3PB) for five types (Good day, Butter bite, Marie, Krack Jack and Salted) of commercial biscuit brands (Britannia, Supreme, Parle, Lancer, Priya Gold and Dalmia) was developed using TA-XT2, texture analyzer and probable factors affecting the results were assessed. Maximum force to break the biscuits, number of fracture before break, thickness of biscuits and percent break point penetration were found in the range of 1006.5 to 3456.5g, up to 3, 4.2 to 6.3mm and 5.54 to 22.62%. The rupture of biscuits were observed on the basis of probe penetration into the biscuits and found that maximum resistance for penetration offered by Marie whereas minimum by salted biscuits, which was respectively the hard dough and fermented dough biscuit varieties. The analysis of variance for the results revealed that there is significant difference (P£0.01) in the maximum force of break for the biscuit types and brands individually or in combination. Difference in the thickness of biscuits was also found significant among types and commercial brands. The number of fractures was not consistent among the types as well as biscuit brands before reaching the maximum force of breaking the biscuit.

9.1. Introduction

Reproduction is an important event in the life of an animal (both male and female). The success of a dairy farm depends on the reproductive efficiency of cattle which depends on the efficient reproductive management. The animals should be reproductively sound. The cow should be a regular breeder with calving interval of 12-13 months to minimize the generation interval and to increase the profitability of the dairy farm. The bull should have high libido, produce good quality semen with high fertility rate.

Fishes are generally unisexual and reproduce by several methods. Some families (Sparidae and Serranidae) are hermaphrodite also. Alz (1964) reported that in certain species, hermaphrodism becomes a normal way of life. In hermaphroditic f ishes, self-fertilisation is a common process. Parthenogenesis could have been produced experimentally (Austin and Walton 1960). There maybe a few secondary organs that increase reproductive fitness. The genital papilla is a small, fleshy tube behind the anus in some fishes, from which the sperm are released; the sex of a fish can often be determined by the shape of its papilla.

Male Reproductive System

Male reproductive system (Fig. 15) consists of testes, epididymis, vas deferens and papillae.

Cocks have two ovoid creamy white testes, of which the left one is slightly larger than the right. Testes are located in the fore end of the kidneys in the abdominal cavity. Closely attached to the testes is short epididymis that continues as vas deferens which ends in the cloaca. The copulatory apparatus consists of two papillae and a rudimentary copulatory organ, the phallus which is located on the median ventral portion of one of the transverse folds of cloaca. Accessory reproductive organs like seminal vesicles, prostrate and Cowper’s glands are absent in the cocks. The phallus is small and has associated lymph glands that produce a fluid which is added to the semen.

The spermatozoa pass through the epididymis and are stored in the distal end of the vas deferens. The sperm after mating is stored in the folds in the oviduct of the hen to effect fertility up to six days. The spermatozoa of the cock have a long cylindrical head with a pointed acrosome, a short mid-piece and a long tail. Cocks produce about 0.5 -1 ml of whitish semen per ejaculate with a sperm concentration of 2- 4 billion.

Reproduction in fungi is the formation of new individuals having all the characters of species. It is of two types. Asexual, somatic, or vegetative reproduction does not involve the union of nuclei of sex cells or sex organs. Sexual reproduction is characterized by the union of two opposite nuclei. During reproduction entire thallus is converted into one or more reproductive units. It is called holocarpic fungi (holo = whole, korpos = fungi) ex. Plasmodiophora and Synchytrium. In Plasmodiophora vegetative body is plasmodium, which is transformed into reproductive structure. In some fungi only a part of thallus is transformed into one or more reproductive structures. (eu = true, good, carpus = fruit). These fungi are known as eucarpic. Both somatic and reproductive structures coexist. Ex. Rhizopus, Puccinia and Helminthosporium.

3.0 INTRODUCTION

There are two main types of plant reproduction / multiplication that are used and these include sexual reproduction known as seed propagation / multiplication and the asexual reproduction known as vegetative propagation / multiplication. Propagation is most often by seeds produced by plants or by plant parts like vines, roots, tubers, suckers, etc. Propagation is the natural mechanism by which plants regenerate. Seed is the organ of reproduction in flowering plants.

3.1 SEXUAL REPRODUCTION OR SEED PROPAGATION TECHNIQUES

Seed is the organ of reproduction in flowering plants. Sexual reproduction is propagation by seeds. This is the main method by which plants reproduced in nature as most plants produce seeds except in species that have separate male and female plants; e.g. Njansang (Ricinodendron heudelotii) and Black fruit (Canarium schweinfurthii)

Seed multiplication seems to be the most practicable technique by the farmers. Example Agroforestry Species that are mostly propagated by seeds are Sweet Bush mango [Irvingia garbonensis], Bitter Bush mango [Irvingia wombolo], Bitter kola, Kola nitida, Kola acuminata, Njansang [Ricinodendron heudelotii].

5.1. Anatomy of the Genitals

5.1.1. Male reproductive system

Testes in the male are oval-shaped present within the scrotum which remain in communication with the abdominal cavity, where they were at birth. The rabbit is actually able to withdraw its testes when frightened or fighting with other males (Fig. 5.1). The testicles descend at about two months. The short, back-slanting penis points forward when erect.

Reproduction in the males culminates in the production of semen containing fertile spermatozoa and deposition of these in the female reproductive tract at an opportune time.

Male Reproductive Organs

The reproductive organs in male domestic animals comprise the testes, epididymides, and accessory glands. The testes produce the spermatozoa and the male sex hormones (androgens). The spermatozoa pass from the testis into the epididymis where they acquire motility and attributes essential for fertilization and are then stored there. At ejaculation they are squeezed along the ductus deferens into the urethra and mixed with the secretions of the accessory glands to constitute the ejaculated semen.

Testis

The testis are composed of long tubes called seminiferous tubules and interstitial tissue. The spermatozoa are produced within the seminiferous tubules. This process is known as spermatogenesis. The interstitial tissue contains Leydig cells which are responsible for the production of the male hormone called androgens. The androgens are produced under the influence of hormones from the anterior pituitary namely ICSH (LH) and FSH. The principal androgens produced by the testis are testosterone and dihydrotestosterone.

The testis are suspended from the body in the loose sacs called scrotum, present in the inguinal region. The scrotum in addition to its container function, also acts as a regulator of temperature required for spermatogenesis.

To achieve maximum reproductive efficiency, animals recently introduced into the breeding herd should be closely monitored. Effective management results in an increase in the number of live farrowed and weaned pigs. The following boar management strategies will aid in increasing fertility.

Care and Management of Breeding Boar

• Boars should be fed at a level of energy that prevents excessive fat deposition. This approach should ensure that they are physically fit and sexually active.
• To fulfil the minimum daily recommended amount, nutrients other than energy need be delivered.
• Boars must be at least 7.5 months old and to be tested for reproductive health.

Animals need to function efficiently during reproduction in order for a dairy production system to be sustainable. This is necessary to produce milk, the primary product of interest, as well as to supply replacement animals. From the perspective of reproduction, delayed puberty, lengthy calving intervals, limited productive lives, and high calf mortality are the key variables that cause economic losses. Reproductive management’s proportionate contribution to the effectiveness of dairy production systems varies greatly.

Mode of reproduction
All the living organisms produce individuls of their own kind for the survival of their species which is called reproduction. Hence, reproduction is the biological process by which new individual organism (offspring) are produced from their “parents”. In vegetable crops, modes of reproduction may be sexual, asexual and both. Most of the vegetable crops viz., tomato, brinjal, chilli, sweet pepper, peas, cowpea, hyacinth bean, French bean, cluster bean, runner bean, fenugreek, lettuce, cabbage, cauliflower, knolkhol, Brussels sprouts, sprouting broccoli, radish, beet, turnip, carrot, onion, leek, amaranth, palak, spinach, asparagus, pumpkin, bottle gourd, watermelon, muskmelon, ridge gourd, snake gourd, wax gourd, summer squash, bitter gourd, cucumber, sweet corn, coriander, parsnip, etc. are exclusively propagated sexually for both commercial cultivation and breeding purpose. Some vegetable crops like, pointed gourd, teasle gourd, yam, taro, Jerusalem artichoke, globe artichoke, etc. are exclusively propagated through asexual mode of reproduction. On the other hand, some vegetable crops like, potato, sweet potato, cassava, annual moringa, etc. can be propagated by both sexual and asexual modes of reproduction however, they are generally propagated asexually for commercial cultivation and their sexual reproduction is employed for the purpose of breeding.