eChapters

Pea (Pisum sativum L.) is considered as the important pulse and popular leguminous vegetable in India. Pea belongs to the genus Pisum, a member of family papilionaceae. Rhizobium bacterium found in root nodules that fixing atmospheric nitrogen and helps in soil fertility. Pea (Pisum sativum L.) originated in the near East and Mediterranean regions. Pea diseases are affect the crop both quantitatively as well as qualitatively. Pea crop diseases caused by the fungal (rust, powdery mildew, downy mildew, aschochyta blight, septoria blight, fusarium root rot, aphanomyces root rot, alternaria blight, wilt, anthracnose, cercospora leaf spot, damping off, seedling rot), bacterial (bacterial blight and brown spot), nematode (root-knot nematode, cyst nematode and lesion nematode) and viral diseases (pea enation mosaic, pea mosaic, pea seed borne mosaic, pea early browning virus, pea streak, pea stunt and cucumber mosaic virus). India is the largest producer, consumer and importer of pulses in the world.

Weather and climate have profound influence on agriculture of a region. There are some differences between these two terms. Weather describes the state of the lower atmosphere of a place with respect to temperature, precipitation, wind direction, wind speed, humidity, cloudiness and pressure etc. over a short period of time. The short term variations over minutes to days are indicated as weather of a location. It says whether the atmosphere is hot or cold, rainy or dry, sunny or cloudy, still or cyclonic and so on usually for period of 24 hours. The weather may vary from place to place and from time to time due to difference in temperature, cloudiness, humidity, rain and other events of atmosphere. It may be sunny at one locality, but rainy at another locality.

1. Introduction
One of the foremost environmental challenges the world faces today is airpollution. As industrialisation, urbanisation, and transportation continueunabated, harmful substance levels in the atmosphere have becomealarmingly high (Thanvisitthpon et al., 2024). This general contamination inthe air is not just a serious risk to humanity but also harms ecosystems whilcontributing to global climate change. Controlling airpollution has becomea critical necessity at this stage, with the need for innovative solutions inthis respect. Bioremediation is one of the innovative solutions, where certainmicroorganisms break down or neutralise pollutants in the air.

Abstract: Acacia nilotica (L.) Willd. Ex Del is an important multipurpose tree of traditional agroforestry system in the central India. The present chapter reports influence of tree canopy positions, i.e. mid canopy, canopy edge and canopy gap, of Acacia nilotica (12-yr) on texture, organic C, total and mineral N and P and soil pH, in different depths of soils, on productivity of rice during rainy and wheat during winter season. It also reports how residual nitrogen under the tree influence yield of rice following its felling after completion of rotation cycle. Sand particles are found to decline by 10% and 9% whereas clay particles increase by 14% and 10% under mid canopy and canopy edge, respectively, than in open. Clay particles are not influenced by the canopy positions. Soil organic C, total N, total P, mineral N (NO3- -N and NH4+- N) and P are greater under mid canopy and canopy edge positions than in open. Soil organic C and N pool sizes are maximum in 0-10 cm and decline with depths. Total and mineral P contents are nearly uniform across the depths. C/N ratio increases with soil depth. Despite greater nutrients pools under the tree, density, aboveground biomass, belowground biomass, aboveground biomass / belowground biomass ratio and yield of the rice decline by 27.5%, 27.5%, 19.1%, 14.8% and 24.9%, respectively. Like the rice, yield of wheat also declines under the tree. 

Feline Leukemia

Feline leukemia is an infectious viral disease of cats, lion, tiger etc. caused by oncorna virus and characterized by malignant lymphoma, lymphocytosis and immunosuppression. It is also known as feline lymphoma or feline lymphosarcoma.

Etiology

• Oncorna virus of retroviridae family

• Type C oncorna virus, RNA virus has reverse transcriptase

Pathogenesis

The virus is transmitted horizontally through salivary and nasal secretions of sick cats. It affects lymphocytes causing their proliferation leading to production of neoplastic growth.

Characteristic symptoms

• Enlargement of superficial lymph nodes

• Lymphocytosis

• Chronic diarrhoea

• Abortion

Introduction
The use of liposomes as carriers for drug delivery has had a profound impact on the pharmaceutical industry. In 1961, Alec Bangham made a significant contribution to the field by introducing liposomes, which sparked a wave of research and development in this area (Bangham, 1992). Over time, liposomes have become incredibly versatile in their ability to transport drugs, biomolecules, and gene therapies. This groundbreaking approach has not only enhanced the effectiveness of treatments but also minimized side effects by precisely targeting specific sites within the body (Lai et al., 2024). Liposomes are vesicular structures composed of one or more concentric lipid bilayers that enclose an aqueous core. Hydrophilic drugs are commonly found within the aqueous compartments, whereas hydrophobic drugs are incorporated into the lipid bilayers. The innovative design of this architecture enables flexible drug encapsulation and precise delivery to specific targets. Liposomes have a wide range of applications in medical science, going beyond drug delivery to encompass diagnostics and vaccines. This versatility greatly enhances their value in the field (Gupta et al., 2023).
An important milestone in liposomal delivery technology occurred in 1995 with the approval of Doxil, which was the first-ever liposomal drug delivery system. Since then, there have been notable advancements in improving the physicochemical properties of liposomal formulations. Although there have been advancements in this field, it is important to remember that the core principles established during Doxil’s approval are still relevant for all liposomal delivery systems. These principles encompass the importance of stability, achieving optimal drug release kinetics, and ensuring biocompatibility and safety (Barenholz, 2012; Wang et al., 2022).
First and foremost, stability is of utmost importance. It is crucial to ensure that liposomal formulations remain intact throughout storage and administration in order to maintain the integrity of the drug and avoid problems such as leakage or degradation. The stability of liposomes can be affected by various factors, including the lipid composition, preparation method, and storage conditions. Ensuring stability necessitates the implementation of advanced manufacturing processes and rigorous quality control measures (Liu et al., 2022).
In addition, it is crucial to achieve the ideal drug release kinetics. Striking the perfect balance between sustained release and efficient delivery to the target site is crucial for optimizing therapeutic benefits and minimizing any potential adverse effects. Designing liposomes to release their payload in a controlled manner, customized to the pharmacokinetics of the encapsulated drug, is a crucial aspect of this process. Optimizing factors like liposome size, surface charge, and the inclusion of targeting ligands can greatly enhance the release profile (Pande, 2024).
Furthermore, ensuring biocompatibility and safety is of utmost importance. It is crucial to conduct comprehensive safety evaluations to ensure that liposomal systems do not trigger immune responses or lead to any adverse reactions. The lipid composition and surface characteristics of liposomes play a crucial

Tulip cut flower is first among the bulbous ornamentals due to its attractive colours and exquisite flowers. Tulip is a member of Liliaceae family, commonly grown from bulbs. The name tulip is derived from the Persian word “toliban” meaning “turban”, which is an appropriate term to describe the flower shape of certain tulips. The mother bulb dies and is replaced by several daughter bulbs, each of which is an annual unit of growth borne in the axils of the mother bulb scale. Tulips are basically grown for three purposes i.e. bulb production, forcing as cut flower and potted plant and for landscaping (Singh, 2006). The world tulip flower industry is dominated by the Netherlands. Another important tulip producing country is France.

Introduction

A toxin (Greek: ôïîéêüí, toxikon, lit. (poison) for use on arrows) is a poisonous substance produced by living cells or organisms that is active at very low concentrations. Toxins can be small molecules, peptides, or proteins and are capable of causing disease on contact or absorption with body tissues by interacting with biological macromolecules such as enzymes or cellular receptors. Toxins vary greatly in their severity, ranging from usually minor and acute (as in a bee sting) to almost immediately deadly (as in botulinum toxin)

1. Introduction
1.1. The Growing Problem of Pesticide Pollution
Pesticides are used in very great amounts in agricultural production for theprotection of crops against pests, diseases and weeds. They are also veryinstrumental in boosting agricultural productivity by ensuring food securityand preventing losses that may be caused by outbreaks of pests (Popp et al.,2013). However, the extensive use of pesticides has generally resulted in hugeenvironmental concerns. Improperlymanaged pesticide residues may remainin soil, water and even air for many years and create severe ecological andhealth hazards in the long run (Zhang et al., 2024). This widespread existenceof pesticides in the environment has raised a serious alarm concerning theiradverse impacts on biodiversity, soil fertility and quality of water, furtherbioaccumulation in the food chain that affects wildlife and human populations(Aktar et al., 2009).

Artificial intelligence can detect subtle changes in animal health before they become apparent through conventional observation. This chapter examines machine learning, deep learning and predictive analytics for livestock disease prediction and diagnosis. Models use physiological signals, diagnostic images, behaviour patterns, environmental conditions and historical records to recognize abnormalities and estimate disease risk. Wearable sensors and IoT devices enable continuous monitoring and early-warning systems, supporting preventive veterinary care and outbreak management. AI-based detection can reduce mortality, treatment costs and production losses while improving decision-making. The chapter also evaluates challenges involving inconsistent data, model interpretability, rural infrastructure, technical accessibility and the practical implementation of diagnostic systems.

Zantedeschia commonly known as Calla lily, Richardia or Pig lily belongs to family Araceae. It is the only genus in the tribe Zantedeschiae which is the sub family philodendroideae. The name Zantedeschia was given as a tribute to Italian botanist “Giovanni Zantedeschi” (1773-1846) by the German botanist Kurt Sprengel (1766-1833). It is considered by many people in the Republic of Ireland to be a symbol of Irish Republicanism. The Romans valued them so much that they often decorated the edges of the bloom with filaments of gold. These spectacular flowers are beginning to rival the rose in popularity for bridal bouquets. In India there has been initiation in the production of tubers of Calla and few tissue culture labs have started production for New Zealand and Dutch Companies. It is used as potted plants, callas are very attractive. It is used for decoration throughout the spring and early summer months focal point for a spectacular arrangement or bouquet.

The extreme weather events of the present day and the expected future climate scenarios at global and regional scales have been attributed to the changes in the atmospheric chemical composition and the massive amounts of greenhouse gases (GHGs) emitted by humans since the industrial revolution, bringing about the global warming and resulting in Climate Change. Further, the natural disasters like flash floods are attributed to the highly conspicuous human interventions with nature – the earth and its atmosphere. The parody of the situation is that, while the GHGs sourcing countries are mainly the developed ones, the sink of the result are the agrarian-dominated and eco-sensitive economies of the tropics. Invariably, tropical regions are to be affected the most, because, on the one hand the general circulation of the atmosphere directly and naturally causes divergence of the polluted air from extra tropical regions towards tropics, while on the other, the industrialization within the tropical regions too would affect the local atmosphere. Karnataka State, being located well within the tropics, can be truly impacted by the climate change caused by anthropogenic sources and it is demarcated into 10 agroclimatic zones (Fig. 9.1) based on crops, soils and climate. Climate experts have warned that Karnataka is likely to be more vulnerable to climate change than other states in India.

Key words : Groundwater Modelling, GIS, PMWIN, ArcInfo Interface Con2grid, Interface Programme, ArcMacro Language.

Introduction

Groundwater is an important source of irrigation in India and has played a major role in increasing the food production. About 50 per cent of total irrigated area in the country is dependent on groundwater (Central Water Commission (CWC), 2000). Productivity of groundwater is normally more than the surface water due to the fact that it is available at the point of use, requires minimum conveyance infrastructure, is available on demand and maximizes the application efficiency. However, in past few years, excessive and unplanned groundwater pumping in certain parts of the country has resulted in depletion of groundwater resources. Water table in these region is going down day by day and making it beyond the reach of poor farmers. Therefore, keeping the water table in the desirable range is a major concern. This can be achieved by adopting proper pumping rate and pumping schedule. Groundwater modelling has successfully been used for deciding the pumping rate and pumping schedule. Groundwater modelling refers to simulation of groundwater behaviour under varying pumping and recharge conditions. A groundwater model is simply a set of equations, which describe the physical processes active in the aquifer subjected to certain assumptions. While the model itself obviously lacks the detailed reality of the groundwater systems, the behaviour of the validated model approximates that of the aquifer.

In order to provide for the establishment of an effective system for protection of plant varieties, the rights of farmers and plant breeders and to encourage the development of new varieties of plants it has been considered necessary to recognize and protect the rights of the farmers in respect of their contribution made at any time in conserving, improving and making available plant genetic resources for the development of the new plant varieties. Moreover to accelerate agricultural development, it is necessary to protect plants breeders’ rights to stimulate investment for research and development for the development of new plant varieties.

Such protection is likely to facilitate the growth of the seed industry which will ensure the availability of high quality seeds and planting material to the farmers. India having ratified the Agreement on Trade Related Aspects of the Intellectual Property Rights has to make provision for giving effect to Agreement. To give effect to the aforesaid objectives the Protection of Plant Varieties and Farmers’ Rights Act, 2001 has been enacted in India

ABSTRACT

Advances in biotechnology, particularly methods for culturing plant cells and tissues, can provide new means for the commercial processing of even rare plants and the chemicals they produce. These new technologies will extend and enhance the usefulness of plants as renewable resources of valuable chemicals. Aristolochic acid is mainly found in the genus Aristolochia. Aristolochic acid has been shown to have anti-tumour activity and has been recommended for its activity against various effects of snakebite and its capacity to inhibit phospholipase A₂ or other enzymes. Considering the importance of medicinal use of A. bracteolata and A. indica, in the present study, they were selected for in vitro development and rapid multiplication of plant through tissue culture. The study was undertaken to enhance the in vitro production of Aristolochic acid in different tissue cultures. Cell suspension culture was established from friable calli of both the species in MS liquid medium. Bergmann plating technique was carried out for cell line selection for more production of Aristolochic acid. Primary transformation was carried out by Agrobacterium tumefaciens strain LBA4404 / pTOK233 with Gus and hpt genes to confirm the transgenic potential of A. bracteolata and A. indica. In order to enhance the production of aristolochic acid in in vitro culture condition, the physical, chemical and biological conditions were altered. Aristolochic acid was isolated, identified and purified from naturally growing plants as well as from tissue culture plants and all other culture staes

Animal behaviour provides valuable information about health, welfare, reproduction, environmental adaptation and social interaction. Traditional observation is labour-intensive, time-consuming and vulnerable to observer bias. This chapter explains how machine learning automates behavioural analysis using video, sensor and bioacoustic data. It covers preprocessing, feature extraction, classification, clustering and recurrent neural networks for temporal analysis. Computer-vision techniques—including object detection, tracking and pose estimation—enable continuous and non-invasive monitoring. Case studies demonstrate applications in livestock management, wildlife conservation and laboratory research. The chapter also examines data labelling, model generalization, ethics, explainable AI, real-time processing and the integration of multiple behavioural data sources

Digital dairy farming integrates IoT, artificial intelligence, machine learning, big-data analytics, cloud computing, sensors and automation to improve herd management. This chapter explains how wearable devices and monitoring systems support early disease detection, welfare assessment, milk-yield analysis and precision feeding. Automated milking, feeding and other operations reduce manual labour, improve consistency and lower operating costs. The architecture of smart dairy systems—including sensors, wireless communication and decision algorithms—is examined alongside environmental and economic benefits. Barriers include high initial investment, limited digital skills, poor rural connectivity and cybersecurity risks. Future developments may include AI-enabled autonomous dairy farms and interconnected, sustainable agricultural ecosystems.

5.1 Introduction

Rainfed agriculture accounts for about 60-95% of farmed land in major areas of the world covering Saharan Africa, Latin America, North Africa and East Asia and South Asia. Agriculture in about 60 percent of 142 m ha of net cultivated area in India is rainfed without access to any source of irrigation. Rainfed agriculture is mostly practiced in arid, semi-arid and sub-humid regions where the rainfall is low in quantity, erratic in distribution and is also characterized by high inter-year variability. Together with poor and degraded soils, this limits the length of growing season as well as the choice of crops that can be grown sustainably. Coarse cereals, pulses, oilseeds and cotton dominate the cropping pattern in the regions where rainfed agriculture is concentrated. More importantly, these rainfed regions provide a livelihood to a majority of the rural poor, and as a result they are often described as concentrations of mass poverty and hotspots for civic strife. The productivity of crops grown in rainfed areas is considerably lower than its potential and much lower than that of irrigated crops. Enhancing the productivity of rainfed crops is therefore important from the viewpoints of growth, equity and sustainability.

Introduction

Pollution is the introduction of contaminants into an environment that causes instability, disorder, harm or discomfort to the physical systems or living organisms they are in.
 
Pollution can take the form of chemical substances, or energy, such as noise, heat, or light energy.
 
Pollutants, the elements of pollution, can be foreign substances or energies, or naturally occurring; when naturally occurring, they are considered contaminants when they exceed natural levels. Sometimes the term pollution is extended to include any substance when it occurs at such unnaturally high concentration within a system that it endangers the stability of that system. For example, water is innocuous and essential for life, and yet at very high concentration, it could be considered a pollutant.