eChapters

INTRODUCTION

Seed is one of the most vital and important inputs for increasing agricultural production. Commercial flower seed production is an international business involving highly specialized growers. Compared with the production of seeds of cereals, pulses oilseed even vegetable seeds, it is done on a relatively small scale. However, a large number of species are being produced under very different cultural conditions. It seems to have great scope for expansion in developing countries like India, especially under northern India climatic zones having favourable growing conditions, skilled and cheap labour.

Annual flowers like petunia, coreopsis, helichrysum, phlox, nasturtium, marigold, gaillardia, salvia, ice plant, verbena, nemesia, pansy, poppy, larkspur, chrysanthemum, etc. have been widely used for seed production. After release of a variety its seed have to be multiplied in sufficient quantity which takes 3-4 generations before it reaches to the farmers for commercial use. The Indian seed programme largely adheres to the limited generations system for seed multiplication in a phased manner. The system recognizes three generations namely breeder, foundation and certified seeds and during multiplication cycle care has to be taken so that variety does not degenerate but maintains its original characteristics.

Seed production of flower has undergone unrestricted revolutionary growth in term of number of crops and their varieties as well as production. This phenomenal development is the result of technological advancement in the production of flower seed and development in the area of production, packaging, handling, transportation and marketing of flower and ornamental plants all over the world. The world germplasm contains more than 1500 different varieties of flowers and ornamental crops. Each species of flower grown for seed has its own specific time, culture, problem of pollination and harvesting and storage requirements. Mild climate with moderate rainfall favour the growth and development of most flower and ornamental crops.

Production of seeds of annual flower is having immense impetus as regards the diversification in floribusiness. The flower seed industry is truly international, operating in many countries in the world. Large quantities of annual flower seeds are required both by developed and developing countries adding to the beauty of private and large gardens and also for cut flower production. Annual flower are indispensable in respect of beautification of gardens. In the world, many nurseries are engaged in the production of seed of seasonal flowers and are having a blooming business. The great diversity of flower seed crops is fascinating facet of the world seed industry and they are of high value and low volume in contrast to the high volume and low value seeds. The varied agroclimatic condition existing in India provides a vast scope for the production of a wide range of flower seeds of both tropical and temperate origin. With the availability of relatively inexpensive human labour, technical expertise, and other material, it is possible to organize a strong flower seed production programmed exclusively for export purpose.

Soil Erosion As a Process
 
Soil erosion is a three stage process, namely (1) detachment, (2) transport, and (3) deposition of soil. Different energy source agents determine different types of erosion. There are four principal sources of energy: physical, such as wind and water, gravity, chemical reactions and anthropogenic, such as tillage. Soil erosion begins with detachment, which is caused by break down of aggregates by raindrop impact, sheering or drag force of water and wind. Detached particles are transported by flowing water (over-land flow and inter-flow) and wind, and deposited when the velocity of water or wind decreases by the effect of slope or ground cover. Processes like dispersion, compaction and crusting, accelerate the natural rate of soil erosion. These processes decrease structural stability, reduce soil strength, exacerbate erodibility and accentuate susceptibility to transport by overland flow, interflow, wind or gravity. These processes are accentuated by soil disturbance (by tillage, vehicular traffic), lack of ground cover (bare fallow, residue removal or burning) and harsh climate (high rainfall intensity and wind velocity).

Plants belonging to the Rhododendron subgenera Pentanthera (deciduous) and Tsutsusi and Azaleastrum (evergreen) are called azaleas. Azalea belongs to family Ericaceae. Azaleas are one of the favourite ornamental plants used by home owners and professional landscapers. They are used as foundation, accent, individual specimen plants, and as mass plantings. Azaleas are good companion plants, working well in designs with many trees, shrubs and ground covers, offering a variety of landscape options. Azaleas can be found in all ranges of colours, from delicately pink-tinged white to strong, bright red, and there are species that has the startling colour of flame. Its bold colour scheme has caused people to carry it far and wide, for use wherever a sudden note in strong hue is appropriate among the milder expressions of the rest of the flowers. The evergreen azalea, Rhododendron simsii Planch., is one of the most important pot plants in Western Europe and the USA. The breeding history of this vegetatively propagated plant is a relatively short one, and breeding has been focused on flower characters because the public is continually asking for new flower colours and flower types.

ORIGIN AND DISTRIBUTION

Nevertheless, very little was known about the origin and the ancestor species used for this important ornamental crop. Rhododendron simsii, the species that is accepted to be the main ancestor, originates from hilly areas in China (Chang Jiang valley), Thailand, Laos and Burma. Apart from R. simsii, at least three other species from the Tsutsusi subgenus, from South-Asia and Japan, might have contributed: R. indicum, R. x mucronatum (Blume) G. Don and R. scabrum (Heursel, 1999).

From a floricultural viewpoint, azaleas are firstly divided into the two broad categories of deciduous and evergreen plants. The former, notoriously more rustic, have North American, Caucasian, and Asian origins, and are classified in the subgenus Pentanthera G. Don, whereas the latter derive exclusively from Asian species and are classified in the subgenus Tsutsusi (Sweet) Pojarkova (Chamberlain and Rae, 1990). Within the evergreen azaleas at least four more or less well defined groups of cultivars are distinguished according to their traditionally recognized most important ancestor: pot or Belgian azaleas (R. simsii Planch. putative hybrids), Hirado azaleas (R. scabrum G. Don putative hybrids), Kurume azaleas [putative hybrids of R. kiusianum Makino var. kiusianum and var. sataense (Nakai) D.F. Chamb. and R. kaempferi Planch.] and Satsuki azaleas [putative mutants or hybrids of R. indicum (L.) Sweet and R. eriocarpum (Hayata) Nakai]. The Hirado, Kurume and Satsuki groups are often referred to as Japanese azaleas because of their geographical origin (Scariot et al., 2007).

In order to achieve maximum and sustainable crop production from available farm resources, it is essential to have proper knowledge of the agro-climatic resources of the location/region. Therefore, a thorough understanding of the climatic conditions would help in determining the suitable agricultural management practices for taking advantage of the favorable weather conditions and avoiding or minimizing risks due to adverse weather conditions. better planning of cropping pattern, developing irrigation and drainage plans for an area (Chaudhary et al. 2015). Hence, trends of temperature and rainfall are studied in this section with possible impact studies on rice production for Chhattisgarh state. Challenges of rainfed rice production can be understood through trend studies of key weather variables. Analysis of rainfall in the context of rainfed rice production in Chhattisgarh state has been carried out. Analysis has been done at Department of Agrometeorology under All India Co-ordinated Research Project (Raipur) to characterize the key weather parameters statistics.

Bougainvilleas (Bougainvillea spp.) are tropical and sub tropical plants belonging to Nyctaginaceae family. They are thorny, evergreen and some are fragrant. Bougainvillea is named for “Louis A. de Bougainville”, a French navigator (1729-1811) who discovered the plant in Brazil in 1768. Bougainvillea plant spreading horizontally or hanging downwards as it is climbing upwards, it makes itself at home in almost any situation. It can be grown as a hedge, groomed as a ground cover, pruned as an espalier, trained as a tree or contained in a pot in a variety of shapes. Bougainvillea is ideal for bonsai. Red, violet, orange, yellow or white bracts appear at the ends of new growth.

ORIGIN AND DISTRIBUTION

Bougainvillea is a native of South America (Bailey, 1963, Menninger, 1970 and Hackett and Sachs, 1985) from Brazil west to Peru and south to southern Argentina. A French explorer and naturalist, Dr. Philibert Commerson or Commercon (1727-1773), discovered the bougainvillea in Rio de Janeiro in 1768. He may have been traveling on a supply ship at the time. His discovery would soon find a name and go on to make a name for itself all over the world. In 1766, a ship called La Boudeuse set sail from Nantes on a round-the-world voyage of discovery commissioned by the French government. At the helm was Louis-Antoine de Bougainville (1729-1811), a mathematician and an admiral in the French navy. When La Boudeuse arrived in Rio de Janeiro to rendezvous with the supply ship, the occasion made horticultural history. Commerson’s newly discovered plant received a name, bougainvillea, in honour of the admiral.

Twenty years after Commerçon’s discovery, it was first published as ‘Buginvillea’ in Genera Plantarum by A.L. de Jusseau in 1789. The genus was subsequently spelled in several ways until it was finally corrected to ‘Bougainvillea’ in the Index Kewensis in the 1930s. Originally, B. spectabilis and B. glabra were hardly differentiated until the mid-1980s when botanists recognized them to be totally distinct species. In the early 19^th century, these two species were the first to be introduced into Europe and soon, nurseries in France and England did a thriving trade providing specimens to Australia and other far away countries. Meanwhile, Kew Gardens distributed plants it had propagated to British colonies throughout the world. Soon thereafter, an important event in the history of bougainvillea took place with the discovery of a crimson specimen in Cartagena, Colombia, by Mrs. R.V. Butt. Originally thought to be a distinct species, it was named B. buttiana in her honour. However, it was later discovered to be a natural hybrid of a variety of B. glabra and possibly B. peruviana - a “local pink bougainvillea” from Peru. Natural hybrids were soon found to be common occurrences all over the world. For instance, around the 1930s, when the three species were grown together, many hybrid crosses were created almost spontaneously in East Africa, India, the Canary Islands, Australia, North America and the Philippines.

In this chapter, an attempt is made to emphasize the fact that while no country in the World is safe from geohazards, a proper understanding on their causes, ways to mitigate them and surviving techniques would help reduce the life and property loss. Each geohazard has its own characteristic way of potential impact and hence classifying vulnerability of different regions and creating awareness on potential impact is essential. In addition to providing basic information on geohazards, this chapter presents a conceptual model on hazard mitigation, rescue and relief operations.

INTRODUCTION

Every year, thousands of people are killed by volcanic eruptions, earthquakes, landslides and floods. These natural causes damage human settlements and infrastructures (GOI, 2004) inflicting life and economic loss. As human population increases, habitation on hazardous and or vulnerable land becomes more common and the risks posed by these hazards increase. The need to observe their behavior, understand them better and mitigate their effects become ever more urgent (IGOS, 2003). Decades of research may have contributed towards betterment of our understanding on the processes of geohazard formation but still a long way has to be covered to develop better mitigation procedures.

In India, about 46 per cent of the milk produced is either consumed at the producer level or sold to non-producers in the rural area, the balance 54 per cent of the milk is available for sale to organized and unorganized players. The organized sector comprises of Government, Producers’ Owned Institutions (Milk Cooperatives & Producer Companies), and Private players which provides a fair and transparent system of milk collection round the year at the village level. The unorganized/informal sector involves local milkmen, dudhias, contractors, etc. and they are mostly found to be opportunistic, as there is no uniformity of milk price paid to producers and it varies depending upon the situation. The possibility of adulteration of milk is higher among these unorganized groups. In the areas where competition is high and the presence of the formal sector is strong, the unorganized sector generally gives higher prices and at the same time, the unorganized sector doesn’t offer remunerative prices to the producers where the organized sector is not present.

Robotics is transforming livestock production by automating repetitive, labour-intensive and precision-dependent operations. This chapter examines automated milking, robotic feeding, manure removal, health monitoring, drones and autonomous herd-management systems across dairy, poultry, swine and sheep production. Integration with AI, IoT and sensors creates connected environments capable of continuous monitoring and data-driven action. Benefits include higher productivity, lower labour requirements, timely animal care and more efficient resource use. Challenges include substantial investment, technical complexity, maintenance and farmer acceptance. Emerging developments such as autonomous farms, swarm robotics, solar-powered equipment and climate-smart robotic systems may further strengthen animal welfare, environmental sustainability and global food security.

Abstract: Alley cropping system is known for several services like fodder and fuel production, nutrient management, and soil erosion control from hilly terrain in humid tropics, but it could not make in farmers field. This study explores the role of Gliricidia leaf manure on nitrogen management in soils. Simultaneously, the system is modified to make it highly profitable, so that it may become farmer’s friendly in humid tropics. For nitrogen management in soil, two methods (leaves being incorporated into soil vs. surface) and three times of application, i.e. zero week after sowing (0 WAS), two week after sowing (2 WAS) and four week after sowing (4 WAS), of Gliricidia leaf in soil was considered. Two additional treatments, urea (120 kg ha-1, equal to the leaves) and control (no urea + no leaves) are also maintained to compute recovery of nitrogen from the leaves by the crop, and to know if the leaf manure could produce grain yield equal to that of equivalent urea. The study reveals there is no effect of the method of application on the decomposition and release of nitrogen from the leaves, soil N mineralization, nitrogen uptake, shoot biomass and yield of the crop, but time of application affects these parameters significantly. Maximum 50 % nitrogen is released quickly from the leaves within 15 days and remaining 48-49 % gradually in 60 days. Rate of soil N mineralization; nitrogen uptake, shoot biomass and grain yield in maize are the highest in 2 WAS and lowest in 4 WAS treatment. Recovery of nitrogen from the leaves is very low ranging from 4.5 to 9.3 kg ha-1. The leaves do not produce yield in maize equal to that of equivalent urea. However, for synchronization of maximum release of N from Gliricidia leaves and it’s 

INTRODUCTION

Soil is one of the most important factors associated with the success or failure of fruit production. Orchard soil management refers to those practices in the soil that aim at getting maximum productivity/production of quality fruits within the limits of soil, water and fertility management over the years. The decision regarding the practices of orchard management should always be taken well in advance before planting of an orchard. The practices for orchard management should be executed in a timely manner during the lifetime of the orchard. An efficient orchard management system always ensures higher return to the grower. However, no single management practice can be recommended for all orchards. The management systems varies from orchard to orchard, locality to locality, soil to soil, from one set of climatic conditions to another set of climatic conditions etc. These systems also have their own merits and demerits. Thus the choice of best suitable system depends on many factors such as climate, topography, rainfall, tree spacing, planting system/ orchard design, root depth of tree, economic condition of orchardists, fertility status of soil and type of main fruit crop etc.However, it should be combined with pruning, nutrient and water management, provision for pollination, fruit thinning and disease and pest management in order to obtain desirable tree growth and vigour with the aim to promote precocity with high productivity. The objectives of an ideal soil management system should be:

Abstract

Multiflash drying (MFD) process is based on the application of multiple cycles of heatingvacuum pulse to a solid food. Heat can be provided by convection (from hot air), conduction (by contact with a hot surface), microwaves, or by a combination of these methods. Due to the moderate temperatures applied to the drying food, and the sudden decompression step (vacuum pulse), MFD processes allow obtaining crispyanddried foods with very good nutritional and sensory properties. Vacuum pulses cause food texturization, which depends on the pressure drop rate during decompression. In fact, the dried products are similar to freezedried foods, but with more open structures, which result in higher crispness. The dehydration can be performed in relatively short processing times, when compared with traditional drying processes (e.g. solar drying, airdrying, vacuum drying and freezedrying). The short process time indicates clearly that this class of drying process presents a huge potential to the production of driedandcrisp foods at industrial scale.

1. Introduction

Poultry industry in India stands out as a major success story. It’s phenomenal that India’s poultry production whichstarted justas a backyard venture before 1960s, has shaped up into a proven agribusiness, where its annual turnover exceeds Rs 30,000 crores. Current global ranking of India is that of number three, in terms of egg production (behind China [1st] and USA [2nd]), and of18th position in Broiler production. Today, Poultry is one of the fastest growing industries of the agricultural sector in India at present. The annual growth of broilers and egg production is 8-10% compared to 1-2% for production of agricultural crops [3].

Poultry production forms an important Agrarian Avenue providing valuable animal proteins for the fast-growing human population of the developing India, with promises of additional income to small and marginal farmers.Rural and backyard poultry farming is very common among landless and marginal farmer families in India and is a rewarding source of additional income. It involves low investment with high returns which can be easily operated by women, children and elder members of the farm families. Poor households generate good income through backyard poultry farming which provides meat and egg rich in protein and energy. Agriculture including animal husbandry provides 30-40% employment in terms of man/woman days in a year. Scarcity of land holdings, land fragmentation and seasonal agriculture aresome of the reasons that crop production only is unable to provide cent percent employment to the rural youths (men and women).

The sheep population in India is estimated to be about 65.07 million ranking second in the world (Anonymous, 2019). There are 42 descript breeds of sheep distributed in various agro climatic zones of the country (Anonymous, 2017). It is well-known that the sheep rearing provides nutritional security and insurance to the farmer at the time of crisis due to crop failure. Therefore, sheep is seen as, “finance elevator” by the countryside poor farmer (Sharif et al., 2011). Two major sources of income; meat and wool make sheep industry a very profitable enterprise. In addition, a rich source of nitrogen, phosphorus and potash present in the droppings of sheep improves the soil fertility. Indian sub-continent isa rich source of diverse ovine germ plasm.
The native breeds of sheep of from India are well adapted to geo-physical and agro-climatic conditions. Most of the breeds of sheep in India have evolved through natural selection. Most of the breeds have generally been named after their place of origin and on the basis of prominent characters. This vast ovine biodiversity in India is being eroded rapidly and more than 50% of sheep breeds are currently under threat.
Sheep biodiversity in India is characterized by high degree of endemism and variations in agro-climatic conditions of the different regions have led to the development of various breeds/strains. Selecting for breeding animals with superior EBV in growth rate, meat, milk, or wool production, or with other desirable traits has revolutionized livestock production through out the world.
Breeding means, the manner in which selected males and females are mated. The breeders identify and select desirable qualities in animals for future mating and discard less desirable qualities. For the improvement of livestock (farm animals) selection and breeding must be practiced simultaneously. Continuous selective breeding leads to homozygosity in a population resulting in loss of variability. If all the individuals are alike, the breeder cannot make progress in future. Hence, there is a need to create variability in population. This can be achieved by breeding. Therefore, selection and breeding go hand in hand for the improvement of livestock.

Soil  and its Components
Soil
Soil is a three dimensional, transferable natural material which is found on the earth crust and provides natural medium to plant growth. OR
Soil is the upper most loose layer of the earth, suitable for plant growth. 
Different scientists defined ‘SOIL’ in different ways:
Buckman and  Brady defined soil as  “A dynamic natural body on the surface of the earth in which plants grow, composed of mineral and organic materials and living forms”.

In the foregoing experiments performed either in CRD or RBD or LSD. We were primarily concerned with the comparison and estimation of the effects of a single set of treatments like varieties of paddy, different methods of cultivation etc., and such experiments which deal with one factor only may be called simple experiments. In factorial experiment the effects of several factors of variation are studied and investigated simultaneously in a single experiment, such experiments are known as factorial experiments. In these experiments an attempt is made to estimate the effects of each factors and also the interaction effects i.e. the variation in the effect of one factor as a result to different levels of other factors.  These experiments provide an opportunity to study not only the individual effects of each factor but also interactions.  In many biological and clinical trials factors are likely to have interaction. Therefore, factorial experiments are more informative in such investigations.

Lagerstroemia indica belongs to family Lythraceae commoly known as Crape myrtle. It it grown well in India for various landscape purposes. It is called Sawani or Shravani (Hindi), Dhayti (Marathi), Chinagoranta (Telugu), Pavalakkurinji (Tamil). Lagerstroemia a long period of striking rainy season flower colour, attractive fall foliage and good drought-tolerance all combine to make a favourite shrub or small tree for either formal or informal landscapes. It is a deciduous, multi stemmed; rounded crown; dense branching and is highly recommended for planting in urban and suburban areas.

The scientific name, Lagerstroemia, was coined in 1759 by Carl Linnaeus, who described and named the plant in honour of “Magnus von Lagerstroem”, an avid naturalist and director of the Swedish East Indies Company. Crape myrtle derives its common name from its crepe-like, crinkled petals, and the resemblance of its leaves to the true myrtle, Myrtus communis. “Crape myrtle” is a peculiarly-American term. Elsewhere in the world, “Lagerstroemia” is often used as the common name for crape myrtle (Knox, 2003).

Crape myrtle is the smaller version of Lagerstroemia speciosa, commonly known as Pride of India or Queen crape myrtle. The deciduous crape myrtle is among the longest blooming trees in existence with flowering periods lasting from 60-120 days. Crapes come in heights as short as 46 cm and as tall as 12 m. Leaves are alternate and smooth, but leaf size depends on variety. Flowers are borne in summer in big showy clusters and come in white and many shades of pink, purple, lavender and red. The bark is a prominent feature being smooth, pinkinsh-gray and mottled, shedding each year. Leaves are small and dark green changing to yellow and orange in autumn. When the leaves fall in winter, crape myrtle becomes a living sculpture. The trunk and branches of tree-form plants have an attractively gnarled, sinuous character with smooth bark. Seeds are narcotic. In Manipur, flowers and leaves are used as purgatives. Bark is stimulant and febrifuge (fever removing). Roots are astringent and used as gargle.

A review on historic occurrences of tsunamis in the Indian Ocean and their associated characteristics followed by detailed characterization of genetic causes of recent tsunamiarepresented in this chapter. Althoughsubmarineearthquakes occur very frequently, resultant tsunami and its strength relied on many factors including transformation of energy into the ocean water, area of rupturing of ocean floor, duration of rupturing, accompanying submarine slides, kind of material at focus of earthquakes and type of faulting. The direction of tsunami wave propagation plays the decisive role in deciding sites of impacts. Perfect blend of all these parameters is required to make a submarine earthquake to generate devastating tsunami, which is relatively rare in geological history. This is the reason why although there were as many as 77 tsunamis that occurred in the Indian Ocean region during historic past, the recent one of 26th December 2004 is deadly and rare geological occurrence. However, aftermath effects in terms of volcanic eruptions, coastal high wave activities and change in climatic cycles are recorded since then and require constant scientific vigil.

INTRODUCTION

Tsunami is defined as a sea wave of local or distant origin that results from large-scale seafloor displacement associated with major earthquake or submarine slide or submarine volcanic explosion. Many a times it is incorrectly described as tidal wave or seismic sea wave, as both of these terms mislead in regard to its mechanism of generation. In Tamil Sangam literature, tsunami is cited as “Azhipperalai”. In South America, it is termed as “Maremoto”. Other names for tsunami include “Flutwellen”, “Vloedgolven” “raz de mare” “Vagues Sismique” and Kai e’e. Prevalence of specific terms for tsunami in many such regions and languages itself stands testimony to the fact that tsunami is known to ancient human populations and that tsunami occurred frequently the historics past.

Women Folk: A Precious Resource

India’s ancient history ascribes a divine status to women. Laxmi, Durga and Saraswati are the three great goddesses of Prosperity, Power and Wisdom respectively. The ancient scriptures declared that ‘God lives where women are worshipped’. However, a multitude of derogatory attributes have been ascribed to women in the post-vedic period. According to Manu, “a woman must never be independent. In childhood, she must be subject to her father, in youth to her husband, and when her lord is dead, to her sons”. The passive role of women, unfortunately thus visualized, later guided the future course of action leading to their present status of backwardness in general and neglect in the streams of development and scientific arena in particular.

The term ‘gender’ was first used by Ann Oakley and others in 1970s to describe the characteristics of men and women which are socially determined in contrast to biological differences. The term ‘gender’ further explains, a neutral term meaning either men or women or both in a particular context. The goal is to improve the status of disadvantaged class and get rid of socially created and approved discriminations. The green revolution in India changed the face of agriculture but apparently it contributed to two general trends (FAO, 1996) where wealthy have benefited more from technological change in agriculture than the less well off andsecondly men have benefited more than women.

The major concern of fisheries and aquaculture is to reduce the widening gap between fish demand and supply and achieve the ultimate goal of self-sufficiency in fish production; however, this can only be achieved if technology advances. The world's fishery resources require scientific management to preserve their long-term viability and availability for future generations. Overfishing and its detrimental effects on ecosystems have become increasingly evident in recent years. Recent developments in fishing technology have focused on reducing the bycatch of non-target species, protected species, and juveniles, minimizing the environmental impact of fishing gear and their operation, and minimizing the energy use per unit volume of fish landed during fishing operations. Fishing innovations have been around for thousands of years, and they were primarily motivated by the goal of enhancing capture efficiency, which was sparked by a growing comprehension of the habits and behaviors of the species that were being sold. The degree of adoption of responsible fishing technologies strongly depends on the robustness of the fisheries management system.

Persimmons are mainly distributed in tropical and subtropical regions of the world. The genus contains nearly 400 species including the horticulturally important, Diospyros kaki, D. virginiana and D. lotus. The persimmon cultivated mainly for fruit is D. kaki, which is called the Japanese persimmon, Oriental persimmon, or simply Kaki. The generic name is derived from the Greek ‘dios’ (meaning divine) and ‘pyros’ (meaning grain of wheat), referring to the excellent fruit of the genus. The specific name kaki is from the Japanese common name given by Carl Peter Thunberg (1743–1828), a Swedish naturalist and medical doctor, and a pupil of Linnaeus. He stayed in Japan from 1775 to 1776 and published “Flora Japonica” in 1784 introducing many Japanese plants.