eChapters

The variable amount of moisture contained in a unit mass or volume of soil and is the key factor affecting the growth of plants. Numerous other soil properties depend very strongly upon moisture content. Gravimetric (direct) and sensor based (indirect) methods are generally employed for soil moisture determination.

9.1 Gravimetric Method (Direct)

Principle

The gravimetric method is based on the principle that the water in the porous material is lost by evaporation on heating and the porous material undergoes an equivalent loss in its weight. However, the water loss may be limited by the internal operation within the complex porous material such as soil. This method is simple, routine, reliable, inexpensive, and easy to use. The major limitations of this method are that it is destructive, laborious and time consuming.

REGRESSION

Regression means to revert or return back. The term was first introduced by Sir Francis Galton in1877. Regression technique is applicable in all those fields where two or more relative variables have the tendency to go back to the mean. Regression analysis refers to the methods by which estimates are made of the values of a variable from the knowledge of the values of one or more other variables and to the measurement of the errors involved in this estimation pro- cess.

In statistical modeling, regression analysis is a statistical process for estimat- ing the relationships among variables. It includes many techniques for mod- eling and analyzing several variables, when the focus is on the relationship between a dependent variable and one or more independent variables. Regres- sion analysis helps one understand how the typical value of the dependent variable (or ‘criterion variable’) changes when any one of the independent variables is varied, while the other independent variables are held fixed. Most commonly, regression analysis estimates the conditional expectation of the dependent variable given the independent variables – that is, the average value of the dependent variable when the independent variables are fixed.

Aim

To determine the reduced levels on various points on the road

To plot the profile of the road

Materials required

Dumpy level

Levelling staff

Theory

Profile leveling is the process of leveling along a fixed line to determine the elevations of the ground surface along that line. The fixed line is generally the centre line of a highway, railway, canal, sewer, etc. The profile leveling is done to determine the undulations of the ground surface. Cross-sectioning is required to determine the levels across the line along which profile leveling is done. Profile leveling should be commenced from a bench mark and should end at a bench mark, as far as possible. When the ground surface does not have many undulations, the intermediate points are fixed at a uniform interval. If the ground surface is irregular and there are abrupt changes in the ground surface, the interval may be non-uniform.

Anthocyanins are members of the flavonoid group of phytochemicals, a group predominant in teas, honey, wines, fruits, vegetables, nuts, olive oil, cocoa and cereals. The primary players in this group include the anthocyanins (eg, cyanidin, pelargonidin, petunidin), flavonols (quercetin, kaempferol), flavones (luteolin, apigenin), flavanones (myricetin, naringin, hesperetin, naringenin), flavan-3-ols (catechin, epicatechin, gallocatechin), and although sometimes classified separately, the isoflavones (genistein, daidzein) (Skibola and Smith, 2000).

Introduction

Various organic orthophosphoric mono-and di-esters in soils are hydrolyzed when incubated with toluene-treated or irradiated soils, indicative of phosphatase activity. Assays have been identified, based on the rates of release of orthophosphate. Phosphatase activities of field soils showed little or no variation with season but were influenced by the cropping system and nature of the plant cover. Activities generally increased after the addition of inorganic and organic fertilizers to soils. However, inhibition of phosphatase by phosphatic fertilizers and by liming of soils (application of ca and Mg) has been reported. Phosphatase activities were directly related to the organic-P of soils but were not consistently related to available-P contents.

Phosphatases have been used to describe a broad group of enzymes that catalyze the hydrolysis of both esters and anhydrides. These are classified into five categories

Introduction

In the ever-evolving realm of fisheries and aquaculture, the infusion of molecular technology has become a beacon of hope, transforming the way we diagnose diseases and identify pathogens. Imagine it as a kind of genetic detective work that not only helps us understand the health of aquatic life but also empowers us to protect it. It all begins with the delicate dance of DNA extraction, a bit like teasing out the secrets locked within the cells of aquatic organisms. This biological treasure map, once unveiled, guides us through the labyrinth of diseases. Enter the PCR protocol for Carp Edema Virus (CEV) detection—a sort of molecular magnifying glass that allows us to zoom in on specific genetic footprints of trouble. It’s like deciphering a genetic code, helping us pinpoint potential issues swiftly.

Introduction

The preservation of animal specimens for museums is a critical practice in natural history, enabling education, research, and conservation awareness. Traditionally, specimens are often sourced from zoological facilities or specific conservation programs. However, the innovative use of fallen animals—animals that have died of natural causes or accidents—presents a sustainable and ethical method of specimen preparation. India has large livestock population. As per 20th livestock census in the country, livestock sector of India comprised of 303 million bovines (Cattle, Buffalo, Mithun and Yak), 74.26 million sheep, 148.88 million goats, 9.06 million pigs and about 851.81 million poultry. Each year large number of livestock is lost due to natural disaster such as flood, cyclones, draughts avalanches, landslides, snowstorm and forest fire. Approximately 55% of its buffalo, 38% of its cattle, 41% of its goats and 47% of its pigs are vulnerable to floods which regularly destroy farmlands. On the other hand, 44% of country’s livestock are affected by draught. Cyclones also causes huge loss to the livestock as well as to the wildlife. According to Down to Earth magazine and Centre for Science and Environment approximately 92519 livestock were killed in India in 2023 due to extreme weather including cyclones.

Entrepreneur
The term “entrepreneur” originates from the French word meaning “to undertake” or “to do something.” It was first introduced by Richard Cantillon in 1755, who described an entrepreneur as an agent who procures factor services at fixed prices with the aim of selling the resulting product at uncertain future prices. Joseph Schumpeter later expanded the concept, portraying the entrepreneur as an innovator who fosters economic development by introducing new products, discovering new markets, sourcing raw materials, and establishing novel organizational structures within industries. Schumpeter emphasized profit as the outcome of innovation and a driving force behind economic growth.
Entrepreneurship
Arthur Cole defined entrepreneurship as a deliberate activity undertaken by an individual or a group to initiate, sustain, and enhance profit through the production or distribution of economic goods and services. Entrepreneurship also encompasses the ability to foresee investment and production opportunities, organize and manage enterprises to adopt new production methods, secure capital, hire labor, arrange raw material supply, identify suitable locations, implement innovative techniques, discover new resources, and appoint top-level managers for the daily operations of the business.
Successful Entrepreneurs’ Characteristic Features
Entrepreneurship and Small Business Development (NIESBUD), New Delhi, describes an entrepreneur as an individual who blends innovation, risk-taking ability, the capacity to recognize opportunities, the skill to mobilize resources, a drive for excellence, and persistent dedication to achieving goals.

This chapter introduces the physical properties that determine the performance, processing behaviour and end use of wool. It examines fibre diameter, crimp, length, strength, elasticity, resilience, moisture regain, felting behaviour and thermal characteristics. The chapter relates these properties to spinning, fabric construction, comfort and durability. It also explains objective measurements and quantitative descriptors such as coefficient of variation and staple strength, providing a scientific foundation for evaluating wool quality and predicting its suitability for different textile applications.

1. Introduction

Man (Homo sapiens) since his appearance on the sylvan Blue Planet started his search for healthcare and beautycare, besides food and shelter. Eventually, he also became conscious about his mind and attempted at ‘mindcare’. He employed leaves, flowers, fruits, etc. or some plant products altering his mind to remain aloof from his heavy worldly affairs, stress or even incurable diseases. He also endeavoured to use plants for his amusement. He exerted more pressure on local biodiversity, modified his study and observations on biodiversity which resulted into ‘cultural biodiversity’. He intensified his method of ‘trial and errors’ to search new sources or biodynamic chemicals. In recent times, he is emphasizing value-addition of the products in hand for his welfare. After food, medicine was his next priority to sustain life in primitive societies. Naturally, his study and research laid emphasis more on food and medicine in comparison to mind-altering bioresources. Even the modern man also paid more attention on the former rather that the latter. These trends have perforce led in partial negligence of research for psychoactive plants in his ambience. The present author, therefore, extended efforts to prepare an inventory of the mind-altering vis-à-vis psychoactive plants in the state of Maharashtra.

Water: Water is one of the most important inputs essential for the production of crops. Plants need it continuously during their life and in huge quantities. It profoundly influences photosynthesis, respiration, absorption, translocation and utilization of mineral nutrients etc. Both its shortage and excess affects the growth and development of a plant directly and consequently its yield and quality.

Soil needs the application of water to:

•    Remove stress condition.

•    Release nutrients in the soil solution for absorption by plants.

•    Leach or wash out injurious salts from the soil.

•    Preparation of land for raising crops.

•    To maintain the temperature and humidity of the soil micro-climate and the activity of soil microbes at optimum level.

DEFINITION

The term Plant Pathology is derived from Greek words- pathos (suffering) + Logos (study) i.e. the study of the suffering plant. Plant Pathology has two phases broadly-

• Science- understanding of the disease i.e. the theoretical consideration of the suffering plants and how do pathogens invade, how do plants defend themselves, what causes symptoms etc.
• Art- the application of the science to the field problems i.e. Diagnosis and Control.

Plant pathology or phytopathology is the branch of agricultural, botanical or biological science which deals with the cause, etiology, resulting in losses and management methods of plant diseases.

Plant pathology can also be defined as the study of the nature, cause and prevention of plant diseases. Plant pathology is related to most of the old and new sciences like biology, physics, chemistry, physiology, mathematics, genetics, soil science, biochemistry, biotechnology etc.

Study of plant pathology includes the study of sciences viz, microbiology, bacteriology, virology, mycology, nematology, protozology, phycology, unfavorable environmental factors, nutritional deficiencies and flowering plant parasites.

Soil consistency refers to the resistance offered by soil against forces that tend to deform it. The soil consistency varies with texture, kind of clay and moisture content. The efficiency of agricultural implements, animals and labour is largely affected by soil consistency as it directly inf luences the workability of a soil. Operations at suboptimal or supraoptimal water contents lead to clod formation, compaction, poor drainage and aeration. The common terms suggested by Atterberg (1912) to describe consistency are liquid limit, plastic limit, plasticity index, and sticky point. The physical basis of consistency limits is related to the interaction of water with soil. The water content at which plasticity is exhibited is the plastic limit or lower plastic limit of soil.

10.1 Liquid limit

Principle

The liquid limit refers to the water content at which resistance to f low becomes negligible and soil represents a semi f luid. A trapezoidal groove of specified shape cut soil held in a special cup will close in 25 taps on a hard rubber plate. The soil in the cup is 1.0 cm deep and the groove is 2.0 mm wide at the bottom with slopes outward at a 60^° angle horizontally. The soil in the walls of the groove f lows under the impact of the cup on the hard base and close the groove.

The pancreas is a thin and elongated ‘V’ shaped organ having two lobes (right and left) and body. It lies in the right cranial quadrant of the abdomen. It is difficult to visualize normal pancreas sonographically because of its echogenicity similar to that of adjacent mesentery and fat.

The nuclear magnetic resonance spectroscopy (NMR) has led to major advances in the studies on the nature and chemical composition of soil organic matter. The technique has the potential for characterizing organic matter in the intact soil and its size fractions without the need for extraction and fractionation. Furthermore, it can provide information on the compositional changes in crop residues, peat and litter of the forest soils during biodegradation and humification.

The poultry industry generates by-products that encompass all materials derived from farms and processing facilities that are not intended for human consumption. These by-products can be classified as either edible or inedible. The edible by-products primarily consist of tissues and bones extracted from poultry carcasses. Conversely, inedible by-products comprise hatchery waste, which includes infertile eggs, deceased embryos, dead chicks, and eggshells, as well as feathers, blood, offal, fat, and manure. These by-products are typically divided into three categories:
1. By-products from the production phase, which consist of litter and manure sourced from the farm.
2. By-products from hatcheries which include materials originating from the hatchery, such as the shells of hatched eggs, dead embryos, infertile eggs, and deceased chicks.
3. By-products from the poultry processing plant, which encompass blood, feathers, offal (including feet, heads, and intestinal tracts), condemned birds etc.
1. By-products from the production phase: Poultry litter and manure from caged layers are extensively utilized as a protein supplement in the diets of both poultry and livestock. Following sterilization and dehydration, poultry manure can be integrated into feed, containing approximately 27-29% protein. It can be incorporated into the diets of broilers at levels of up to 20% and layers at 25%. In addition to their application in animal feed, poultry manure and litter are valuable as a ‘surface dressing’ for agricultural fields. They function not only as effective fertilizers but also improve soil texture. One ton of deep litter yields approximately 29.48 kg of nitrogen (equivalent to 136.08 to 147.42 kg of ammonium sulphate), 20.41 kg of phosphorus (equivalent to 113.40 to 136.08 kg of ordinary superphosphate), and 20.41 kg of potash (equivalent to 45.34 kg of potassium), along with 6.80 kg of magnesium, 6.80 kg of sodium, and 27.21 kg of calcium. Furthermore, poultry manure is rich in trace elements such as boron, copper, iron, sulphur, and zinc.

Fracture of radius-ulna & tibia-fibula comes under middle level fracture. Pop caste application or bandage along with Thomas splint has been considered as standard method of repair.

The fracture site is immobilized extending between joint below and joint above level with either gum bandage or pop caste bandage (Fig.1).

Pop caste bandage is generally applied after 7 days. Hence gum bandage is preferred than pop caste bandage because of immediate application after occurrence of fracture (Fig.2).

For gum bandage application, a 8-16 layer thick cloth is wrapped over the fracture region covering the joint above & joint below of the site after liberal application of fevicol gum. The cotton cloth Is placed in position with few cotton thread knots (Fig.3).

4 bamboo splints are kept on the 4 sites of the limb over cotton padding. The end of bamboo splints kept padded to avoid skin damage. Splints are retained in position by thread with knots (Fig.4).

A 2^nd layer fevicol gum is applied over entire bandage & finally the entire bandage cloth is covered with bandage roll (Fig.5).

At the end the immobilized limb is over strengthened with Thomas splint (Fig. 6).

Vices of poultry are undesirable behavioural pattern manifested by the bird in the flock and spreads fast among the members resulting in financial losses.

Types of Vices

Pecking

Cannibalism

Egg eating

History in general reveals chronological account of important events, contribution of persons who significantly influenced the thinking of their era and the interpretations of the observed facts or phenomenon over the period of time. The progress in plant pathology leading to the major land mark in mycology, plant bacteriology, plant virology and plant disease control has been described in chronological order for easy and better understanding of the student in following sub-headings.

Apomixis was defined by Winkler as replacement of the normal sexual reproduction by asexual reproduction, without fertilization. This definition notably does not mention meiosis. Thus “normal asexual reproduction” of plants, such as propagation from cuttings or leaves, has never been considered apomixis, but replacement of the seed by a plantlet, or replacement of the flower by bulbils are types of apomixis. Apomixis deviates from sexual reproduction in several aspects: modification or complete omission of meiosis, formation of unreduced megaspores, parthenogenetic development of embryo, and autonomous, or pseudogamous, endosperm development (Ramulu et al., 1998). Apomixis produces embryos or seed progeny that are exact genetic replicas of the mother plant. The main advantage of apomixis over sexual reproduction is the possibility to select individual plants with superior characteristics and to propagate them clonally through seeds. Apomictically produced offsprings are genetically identical to the parent plant. In flowering plants, the term “apomixis” is commonly used in a restricted sense to mean agamospermy, i.e. asexual reproduction through seeds.