eChapters

World Trade Organisation

The World Trade Organisation (WTO) was the result of years of painstaking efforts on the part of governments and other bodies to establish a globally acceptable basis for a new economic order. It was established to correct the imbalances and disparities in international trade and bring about an evenly balanced world trade order that equally benefits the developed, developing and least developed nations. While there are several agreements under the WTO, the Agreement on Trade Related Aspects of Intellectual Property Rights (TRIPS Agreement) specifically represents the resolve of all member countries to use intellectual property as one of the means for achieving economic balance and diminishing the trade barriers.

Plant nutrient disorders result from nutrient imbalances in soils. Nutrients are considered essential for plants, when it satisfies the following criteria (Arnon and Stout,1939):
    1.    The deficiency of the nutrient element makes it impossible for the plant to complete its life cycle
    2.    The deficiency of the element is specific and can be corrected only by supply of that element
    3.    The element is directly involved in the nutrition of the plant

Abstract

Mulberry is a fast growing deciduous woody perennial plant. It has a deep root system. the leaves are simple, alternative, stipulate, petiolate, entire or lobed. The number of lobes varies from one to five. Plants are generally dioecious. Inflorescence is catkin with pendent or drooping peduncle bearing unisexual flowers. Inflorescence is always auxiliary. Male catkins are usually longer than the female catkins. Male flowers are loosely arranged and after shedding the pollen, the inflorescence dries and falls off. These are four presistent parianth lobes and four stamens implexed in bud. Female Inflorescence is usually short and the flowers are very compactly arranged. There are four presistent parianth lobes. The ovary is one-celled and the stigma is bilid. The chief pollinating agent in mulberry is wind. Mulberry fruit is a sorosis, mainly violet black in  colour. 

A. Estimation of Calcium

Requirements : Pottasium permanganate solution (0.1N) – Dissolve by heating 33g of potassium permanganate in 1000ml distilled water and allow to stand in coloured bottle for several days. Filter contents through 6mm thick film of asbestos mat on Gooch crucible.

Asbestos mat – Digest asbestos with dilute hydrochloric acid(1:3) for 2-3 days, wash free from acid and digest with 10% sodium hydroxide for few days, wash free from alkali. Digest with dilute Nitric acid(1:3) for several hours and wash. Shake with water into fine pulp and digest with 0.1N potassium permanganate solution that has been acidified with dilute sulphuric acid (1:3), for 1 hour and wash. Use this pulp for layering 6mm film on Gooch crucible.

Dilute hydrochloric acid (1:4), Ammonium hydroxide solution (1:1), Saturated ammonium oxalate solution, Diluted sulphuric acid (1:4)

Environmental Ethics is a conceptual term which consist various aspects of environmental fundaments, Enviromental ethics is responsible to protect and sustain the resources and ecological system.

Management of Other Avian Species

Duck

Overview

• Asia: The homeland of ducks.

• Global Rankings: China holds the first position in duck population, followed by India.

• Significance in India: Ducks are the second most important poultry species, constituting about 10% of the total poultry population (851.82 million) and contributing 6-7% of the total egg production (138.38 billion) in the country (BAHS, 2024).

Introduction

Spices are high value export oriented crops extensively used for flavouring food and beverages, medicines, cosmetics, perfumery etc. Spices constitute a significant and indispensable segment of culinary art and essentially add flavour, colour and taste to food preparations. Farm level processing operations are important for value addition and product diversification of spices. It is essential that various operations like washing, threshing, blanching, drying, cleaning, grading, storing and packaging ensure proper conservation of the basic qualities like aroma, flavour, pungency, colour etc. Each of these operations enhances the quality of the produce and the value of the spice.

India is the largest producer, consumer and exporter of spices in the world. India produces more than 65 spices in different varieties out of the 109 spices listed by International Standards Organisation (ISO). India produces around 5.8 million tons of spices annually (2012-13), of this about 10% of the total produce is exported to over 150 countries. The USA, Europe, Australia, Japan, the Middle East and Oceanic countries are the major importers of Indian spices. Estimated world trade in spices is 1.05 million tons valued at 2750 million US $, out of which India has a significant share of 48% in quantity and 43% in value.

Various systems were developed to take produce from field to consumer and selection of a particular method depends on several factors, including perishability and value of crop.  One method is to harvest the crop and take it to a packhouse for various unit operations like grading, cleaning, post-grading treatments, and packing for transport and marketing. When deciding upon where to locate a packinghouse, access to field and market point, adequate space for vehicles to enter and leave  packinghouse and ease of access to labor will all be considered.
 
In the simplest packinghouse, produce is delivered in picking containers, immediately after harvest, directly to packers.  Packers then sort, grade, size and pack the produce directly into appropriate transport containers. In this case, each worker must be aware of produce defects, grade and size requirements, and packing methods.

Soils are the basis of food production. Ninety five percent of our food is directly or indirectly produced on our soil. A healthy soil maintain a diverse community of organisms that helps in controlling pests (insects, weeds, and fungus) but also form beneficial symbiotic association with plant roots, recycle essential plant nutrients and improve soil structure. A healthy soil can also be a strategic ally in mitigating and adapting to climate change, as soil sequesters CO₂ and prevent to escape into the atmosphere. Beside this, it contributes to mitigate climate change by maintaining or increasing its carbon content. This can be said that the proportion of organic carbon is available more in the soil than combining both atmosphere and ground vegetation. Most of the soil organic carbon (SOC) stored in the first metre of the soil in the form of organic matter. However, organic matter degrades due to deforestation; deplete soil biodiversity, loss of nutrients as consumed by crop plants, soil compaction due to excessive use of agricultural machineries, soil erosion, water logging conditions, and urbanization, which release greenhouse gases like CO₂, CH₄, and N₂O into the atmosphere causing global warming and climate change. One third of all CO₂ emissions come from changes in land use (deforestation, shifting cultivation, and intensification of agriculture) whereas two-thirds of CH₄ and majority of N₂O emitted through agricultural practices (Kotschi and Müller-Sämann, 2004).

Storage is one of the most important aspects of post harvest handling of fruits and vegetables. The main objective of storage is to extend storage life of fruits and vegetables and increase their period of availability. A substantial quantity of fruits go waste in India due to lack of proper storage facilities. Storage of fruits and vegetables is practiced for various reasons. Proper post harvest handling of fresh horticultural produce helps in extending  period of availability of wide range of  fruits and vegetables round the year, prevention of seasonal market gluts, orderly marketing, better return to grower and  preservation of  nutritional qualities. The   long  term  storage  of  fruits  and  vegetables is expensive and requires high level of technical  knowledge of crop. However, an orderly marketing reduces storage period considerably. 

10.1 Introduction

Bony fishes (perfect mouth fishes) have a distinct mechanism for opening their mouths by lowering the mandible through the hyoid apparatus, skull either hyostylic or amphistylic. They have a single pair of respiratory openings, a movable maxilla and premaxilla, four-gill arches, a swim bladder, an operculum and a homocercal tail. They are both freshwater and marine. They vary greatly in shape but are built on the same basic plan.

1. The most effective method of selection is

a) Mass selection

b) Pedigree selection

c) Progeny testing

d) Selection index

2. The intensity of selection depends with number traits considered ‘n’ is

a) 1/n

b) 1/n²

c) n

d) 1/√n

The number of hormones secreted by the body exhibits control over the physiological regulation of glucose sugar level (homeostasis) in the manner needed by the body. Depending upon the situation, hormones may increase or decrease the level of glucose sugar present in the blood or tissues. The glucose is oxidized to yield energy, carbon dioxide, and water.
Glucose, more than the body’s needs, is stored or converted mainly to glycogen and, to some extent, protein and fat. If glucose is less than the need of the body, its denovo synthesis takes place from amino acids or fatty acids, or is formed from the breakdown of stored glycogen. Various hormones are secreted by multiple endocrine glands to control the blood glucose level. If it fails, it leads to hypoglycemia or hyperglycemia conditions. Gluconeogenesis is not developed at birth in the case of a baby pig. Therefore, hypoglycemia in baby pigs is observed within 2 days of age if starved, leading to hypoglycemia, weakness, confusion, and death.
15.1 The Hormones Involved in Homeostatic Regulation of Blood
Glucose Level
The hormones influencing carbohydrate metabolism are explained below:

Introduction 
Ergonomics is the science of adapting workplace conditions and job requirements to match the capabilities of the workforce. Its primary aim is to enhance comfort, improve health, and boost productivity in the work environment. To achieve these goals, ergonomics examines the interaction between workers and their tools, equipment, and furniture, ensuring they are aligned with the tasks being performed. It involves applying scientific knowledge about human behavior and physical needs to design objects, systems, and environments that promote efficiency and safety. Ergonomics is relevant to all activities involving people, including work systems, recreational pursuits, and health and safety measures. By focusing on the relationship between individuals and their work environments, ergonomics plays a crucial role in safeguarding both physical health and workplace safety. The foundation of good ergonomic practices lies in adapting tasks to suit the individual rather than forcing the individual to conform to the job. An ergonomically designed workplace incorporates tools and processes that accommodate workers’ physical abilities and limitations, reducing the risk of injuries and discomfort. The importance of ergonomics has grown as it highlights the connection between certain job activities and the risk of injury. The human body is not designed to remain in awkward or unnatural positions for extended periods without experiencing strain. Ergonomics helps identify harmful postures and movements and provides strategies to prevent associated pain and injuries. In office environments, ergonomic practices are essential for enhancing productivity. A well-designed ergonomic workplace can improve efficiency, boost employee morale, and contribute to overall worker well-being. The various environmental factors affect working people in one or the other way, it may be health, performance and comfort. However they are not independent because, although these aspects are considered independently but their effect likely to be combined. Although human beings are extremely adoptable but still they get affected of the ideal range of tolerance to environmental factors for comfort or for performance is very narrow. Although physiological effects of environmental

Introduction

Agricultural soils harbour a rich variety of nematode fauna, where they coexist with a myriad of other microorganisms. It has been estimated that one cubic meter soil of highly fertile field may contain as many as 3×10¹⁴ bacterial cells (300 g), 5×10⁸ protozoa (39 g), 1×10⁷ nematodes (12 g) and fungi (400 g), besides other organisms. The nemic fauna comprises of free-living (saprophagous and microbivorous), predatory forms and plant parasites (phytophagous). In addition, certain animal and insect parasitic forms may spend a part of their life cycle in soil. Plant parasitic nematodes (PPNs) exist in poly-specific communities and attack all types of plants- cultivated or wild. They possess a needle-like stylet or spear at their anterior end, which is used to puncture the plant cells and ingest the cell contents. Majority of PPNs dwell in soil and draw their nutrition from plant roots. Only a few forms attack the above ground plant parts such as stem, leaves, inflorescence and seeds. PPNs may be ectoparasites (feed from outside and do not enter plant tissues) or endoparasites (enter inside the plant tissues). The endoparasites spend a part of their life cycle in soil or may come out into the soil to re-infect the other roots. These may be further categorized into migratory or sedentary types. The migratory forms keep on moving, feeding and laying eggs that are scattered in soil or plant tissues. The sedentary nematodes are more harmful and a particular stage of their life cycle infects the plant and establishes a feeding site by modifying plant tissues by their enzymatic secretions. The females of sedentary nematodes usually attain swollen shapes upon maturity and lay hundreds of eggs in clusters.

Plant parasitic nematodes are ubiquitous, and so far, more than 1800 species have been recorded. They are obligate parasites and must feed upon plant hosts, thus, debilitating the plants to some extent. The extent of direct damage by the nematodes to plants depends on several factors viz., nematode density in soil, nature of parasitism (ectoparasite or endoparasite), host susceptibility, cropping pattern, edaphic factors (mainly soil texture and moisture) and ambient climatic conditions (like temperature and relative humidity). Nematodes, by themselves, rarely kill the plants to ensure their own survival. Nematodes also inflict considerable indirect damage to crops by interacting with other plant pathogens (fungi, bacteria and viruses) to cause disease complexes in which nematodes act as incitants, aggravators, or vectors.

Introduction

The arid regions in India occupy 38.7 million ha (Mha), comprising 31.7 and 7 Mha under hot and cold arid region, respectively. The major part (90%) of the hot arid region lies in Northwest (NW) India and the rest in geographically isolated pockets in South India. The NW arid region extends from 22°30” to 32°50” N and 68°50” to 75°45”E , bounded by Aravalli hills in the east, Thar desert in the west the irrigated Indus plain in the north and the alluvial plains of the Sabarmati river in the south. The region mostly lies in western Rajasthan covering 12 districts (196150 km², 68.7%) followed six districts in northwest Gujarat (62180 km² 21.8%), five districts in southwest Haryana in (12840 km² 4.5%), and six districts in southwest Punjab in (14510 km², 5.0%) (Fig.1). The region is characterized by low rainfall (100 to 400 mm yr-1), that is also erratic and highly unpredictable (coefficient of variation, CV = 30 to 70%); high evaporation (1600 to 2000 mm yr-1); temperature extremes (-5.7° C to 50°C); frequent droughts (once in 2.5-5.0 years); strong winds (20-50 km h-1) during summer; and short crop growing period (8 to 15 weeks) (Moharana et al., 2016). Despite the common characteristics of aridity and extremes of temperatures, there are enormous spatial variations in terms of rainfall pattern, physiography, soils, amount of available surface and ground water, and extent of vegetation cover (Joshi, 2012). Accordingly, the NW hot arid region has been classified in 4 sub-regions, 11 zones and 34 sub zones (Faroda et al., 1999).

Despite these intimidating conditions, the region supports a large human and livestock population and biodiversity. However, the ever-increasing human and livestock population and developmental activities exert enormous biophysical pressure on the slender natural resource base of the region. A major challenge is desertification due to wind erosion/deposition, water erosion, water logging and salinity. Degradation of permanent pastures has led to loss of fodder resources constraining livestock husbandry, the backbone of the economy of the region. Of late, industrial effluents and mining are also contributing to desertification.

Introduction

A revolution is coming to the more than a century-old automobile industry. Electric vehicles (EVs) are viewed as a solution to a variety of problems, including reducing greenhouse gas emissions, fostering sustainable economic growth, improving air quality, and reducing the importation of fossil fuels. The demand for electric automobiles in India is rising. Incentives and programs have been launched by the federal and state governments to promote the usage of electric vehicles, and there are also regulations and standards in place. A consumer is a person or group that plans to purchase something, actually does so, or utilizes it for primarily social, family, domestic, or other non business or entrepreneurial activity-related objectives.

An asset that is an important criterion for evaluating the status of the consumer economy can be used to estimate consumer savings.

The concept of electric cars has been around for a while, but in the past ten years, it has gained a lot of attention due to the expanding carbon footprint and other environmental implications of fuel-powered cars. In contrast to an internal combustion engine, which generates power by burning a mixture of fuel and gases, an electric vehicle (EV) is propelled by an electric motor. When electricity was one of the favored sources of motor vehicle power in the late 19th century, electric vehicles (EVs) first made their appearance, providing a degree of comfort and usability that gasoline cars of the day were unable to equal.

Introduction

To keep pace with the ever-increasing demand for crop yield by the exploding population, use of chemical fertilizers and pesticides in agricultural production has become indispensable.  Production cost of agriculture has skyrocketed owing to the abandoning of green, organic farmyard manure and use of chemicals. However, the problems associated with chemical pesticides are abundant. The excessive application of chemical fertilizers causes soil sealing, fertility diminishing and residual problems. The leftover chemical fertilizers and pesticides have seriously affected the quality of agricultural products, people’s health and caused environmental pollution.  The over use of fertilizers has also damaged the soil’s original micro-ecological balance and deteriorated the diseases spread by soil.  While some pesticides must be abandoned because of their unacceptable non-target effect, there will always be a need in agriculture for safe and selective chemicals to limit the effects of pests.  More significantly, it is becoming increasingly more difficult and expensive to find new kinds of synthetic chemical pesticides.  Implications of chemical pesticides in ecological, environmental and human health problems have increased public awareness and concern regarding the continued use of agrichemicals that are damaging to human or  environmental health thereby obviating the search for effective alternative approaches which have minimal deleterious effects, more environmentally friendly, and will contribute to the goal of sustainability in agriculture.  In this line Plant growth-promoting rhizobacteria (PGPR) present immense potential and promise as effective substitutes for chemicals.  PGPR enhance plant growth and survival, control soil-borne fungi, and induces systemic resistance to phytopathogens and is used as inoculants for biofertilization, phytostimulation and biocontrol.

Introduction

India is one of the major producers and exporters of honey. Diversity of bee flora and varied agro-climatic conditions in the country offers enormous potential for the development and growth of apiculture. Honey is a supersaturated sugary material produced mainly by honey bees from the sweet substances of plants (floral or extra-floral nectaries) or insect. Honey bee forager (field bee/worker honey bee) collects the nectar and converts the same into honey by a process of regurgitation and evaporation and stores in the honey comb. The sweetness of the honey is largely by monosaccharide viz., fructose and glucose. Honey is either monofloral or polyfloral as it is collected by the bees. The physical properties of the harvested honey depend upon the source from it is derived, water content, temperature, proportion of the simple sugars present and the method of processing. At low temperature (below 17°C), honey gets crystallized. Honey is also hygroscopic, capable of absorbing water from the atmosphere. India produces approx. 65,000 mt of honey per year (Kejariwal, 2015).

Introduction

A recent study investigated the feasibility of sustaining current and increased per capita fish consumption rates in 2050, based on extensive data with respect to the changes in global and regional climate, marine ecosystem and fisheries production estimates, human population estimates, fishmeal and oil price estimations and projections of the technological advancement in aquaculture technology. The study concludes that meeting current and larger consumption rates is feasible only if fish resources are managed sustainably and fisheries management are effective (1). Aquaculture Farm Managers facing uncertainty has to make decisions every day. Some decisions have vital consequences for farm business, while others are not as crucial. These decisions mainly relates to seed, feed, fertilisers and regular water intake as management tools of farm. The choices made today may have an immediate impact on the aquaculture business or may take much longer to have an effect. These decisions may involve any facet of the farm business, including production, personnel or financing. The bottom line is that irrespective of the size or scope of any single decision, nearly all decisions may have important implications for the immediate and future success of the farm business. Because many decisions have such important impacts, farm managers need to analyze alternatives in a methodical fashion. Some alternatives can easily be analyzed, and a decision can be made quickly. In other cases, farm managers must take more time to recognize and evaluate all potential effects of that decision. To do this, farm managers need a framework for analyzing the relevant trade-offs. Agricultural economists are usually members of multidisciplinary teams, engaged in solving problems of fisheries. The economist applies economic concepts and tools to estimate economic profitability of a technology. This input can be made during any phase of the research process, technology development, testing and evaluation on farm. This paper will focus on partial budgeting as a tool that can be used by non-economists. This paper discusses on the concept of partial budgeting, a useful and easily implementable framework for such analysis.