eChapters

1. The Aflatoxin Molecule

Aflatoxins are chemically difuro-coumarin derivatives. Presently, 18 different types of aflatoxins have been identified with aflatoxin B₁, B₂, G₁, G₂, M₁ and M₂ being the most common. Of these Aflatoxin B₁ (AFB₁) and G₁ occur most frequently, with AFB₁ being the most potent. Physicochemical and biochemical characteristics of the AFB₁ molecule reveal two important sites for toxicological activity (Heathcote and Hibbert, 1978). The first site is the double bond in position 8,9 of the furofuran ring (Figure 1). The interactions of aflatoxin, DNA and proteins, which occur at this site alter the normal biochemical functions of these macromolecules and leads to deleterious effects at the cellular level.Monteiro et al. (1966) studied the in vitro interaction of groundnut proteins namely arachin and conarachins with AFB₁ molecule. The second reactive group is the lactone ring in the coumarin moiety (Lee et al., 1981). The lactone ring is easily hydrolyzed and is therefore vulnerable to degradation.

1. Introduction

Foods are complex biologically and chemically active systems that require close monitoring of their manufacturing, distribution and storage conditions in order to maintain their nutritive value, safety and sensory qualities by suitable chemical. The determination of trace impurities in food system presents considerable difficulties owing to complexity as it contains thousands of major and minor compounds (Nilufer and Boyacio, 2002). The choice of the method of analysis depends on the sample, the analyte to be assayed, accuracy, limit of detection, cost and time to complete the analysis (Aboul- Eneim et al., 2000). The chemical methods employed for food analysis and quality control are generally time consuming and require tedious or destructive sample preparation. For development of the new detection method, emphasis should be on development of simplified, cost-effective and efficient procedures that complies with the legislative requirements (Stroka and Anklem, 2002; Enker, 2003).

The molecular spectroscopy is a fast, accurate, easy and non-destructive technique that can be used as a replacement of time-consuming methods. Near infrared (NIR) spectroscopy has proved to be a powerful analytical tool used in the agricultural, nutritional, petrochemical, textile and pharmaceutical industries (McGlone and others, 2002; Esteban-Diez and others, 2004). Infra red spectroscopy is based on the absorption of infra red light by the substance to be measured. This absorption excites molecular vibrations and rotations, which have frequencies that are the same as those in the infrared range of the electromagnetic spectrum (Pande and Mishra, 2015). This application uses a fiber optic coupled FT-NIR system operating in the 10,000 – 4,000 cm^-1 region in reflectance mode. It involves the analysis and quantification of molecular responses to introduced signals of known energy or frequency. All molecules (e.g. water, glucose, protein) have a definite amount of energy. When alternate energy (e.g. infrared radiation) is introduced, an energy exchange occurs between the introduced energy and the energy contained within the molecule. This is expressed as absorbance (energy is absorbed resulting in a loss of introduced energy), attenuated (energy is scattered resulting in a loss of introduced energy) or emitted (energy is released resulting in a gain on the introduced energy). As individual molecules and molecular groups (e.g. alcohols, nucleic acids, proteins, sugars and fats) have definite energy, by applying external energy of a known amount/type, one can structurally identify, quantify and even determine the natural state of these molecules within complex samples and mixtures.

1. Introduction

Product development is a basic activity in the food industry. Each company has a product mix, often including hundreds of products, which are constantly evolving - old products dying, products reaching maturity, products contributing to rapid growth and new products being introduced.

In the food industry, just as any other industry, product and process development is considered a vital part – indeed the lifeblood – of smart business strategy. Failure to develop new and improved products relegates firms to competing solely on price which favours the players with access to the lowest cost inputs (land, labour etc). Product and process development (commonly referred to as product development) is systematic, commercially oriented research to develop products and processes satisfying a known or suspected consumer need. Product development is a method of industrial research in its own right. There are essentially four basic stages in the model product development process.

1. Introduction

Antioxidants are considered an important class of nutraceuticals which are associated with health improving properties. Antioxidants are compounds which when present in foods at concentrations lower than an oxidizable substrate, markedly delay or prevent the oxidation of substrate (Halliwell, 1999). They are increasingly applied in food systems to retard the oxidation process, particularly in lipid containing foods (Droge, 2002; Lee et al., 2004). The commercially available solutions to counter food oxidation are predominated by synthetic antioxidants such as butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tertiary butyl hydroquinone (TBHQ), among others, which are increasingly rejected by consumers and legitimized by regulators due to long term health implications (Park et al., 2001). As a consequence, the development and utilization of natural antioxidants as alternatives to synthetic ones have attracted global interest among researchers.

The use of spices and herbs in foods was known since ancient times to modify or to improve the flavor. However, the antioxidant properties of only some of the spices have been recognized. Different spices and their extracts such as turmeric, ginger, fennel, rosemary, and sage, among others, are reported to possess very high antioxidant properties, owing to the content of biologically active compounds, which enables their food application (Madhavi et al., 1996). Exploitation of natural antioxidants in consumer goods is increasingly accepted and will gain momentum due to the rise of green consumerism. In this chapter, an attempt has been made to provide an insight into natural antioxidants and colors. Beginning with the source distribution of natural antioxidants, followed by review of extraction methods for their isolation from plant based matrices and bio-preservative properties in vegetable oils to delay rancidity. Lastly, a thorough collection of literature pertaining natural colors has been presented to potentiate the application of clean label ingredients in food systems. The application of natural antioxidants and colors in food products can vouch the food safety with value addition in terms of their nutraceutical properties.

1. Introduction

Storage is an important part of any food grain processing chain. Storage of raw and processed food grain has been used by humans since time immemorial as a prerequisite for insuring food security due to off time availability, and for holding seed grain for long periods (Pande and Mishra, 2012). After harvesting grains may be required to be stored for long periods before these are marketed or used as food or seed. The grain storage is mainly carried out for three purposes viz (i) to retain a supply of food (ii) to service a trading system and (iii) to retain seed for planting the following season (Hall, 1980). Storage is, therefore, carried out by the producer, trader, processor, and the exporter and at all these levels the methods adopted affect the quality of food stuffs. The length of time grains can be safely stored will depend on the condition it was harvested and the type of storage facility being utilized. Grain storage and handling is a major concern for food grain growers and processers worldwide (Mohan et al., 2011; Pande and Mishra, 2012). Depending upon the condition and uses food grains may be stored in different storage structures using traditional or modern storage methods. Different storage structures are used by farmers with the traditional names like Gumma, Oliya and Jute bag. Caswell (1973) recorded 50 to 60% of insect damage on food grain after six months of traditional storage. A typical range of storage methods encountered in tropics and subtropics region is given in Table 1.

1. Introduction

Dairy industry size and demand precede all other segments of food industry. Reporting milk production of 146.3 million tonnes in 2014-15, India is currently occupying first position in world scenario (NDDB, 2015). In spite of limited shelf-life, milk offers various opportunities of product diversification, processing optimisation and convenient packaging solutions. All categories of dairy products are unique and vary in market value. The operating margins in value-added dairy products are almost twice of liquid milk business due to reduced need of refrigeration and added shelf-life. The appeal and satiety it offers makes them ambrosia for consumers. Baked and fried dairy products (BFDP) are those class of dairy products in which main processing operation is either baking or frying. In addition to preservation of milk solids for longer time at room temperature, manufacture of baked and fried dairy products add value to milk and also provide considerable employment opportunity (Pal and Raju, 2007;Patil, 2011). The characteristic flavour and colour development of the product rely on this unit operation or cooking method and it cannot be replaced. The unique difference in baked and fried dairy products is that in baking dough is prepared and for frying batter is prepared which vary significantly in characteristics (Table 1). The quality of the finished product greatly depends on how the dough or batter is handled.

The nutritional richness and the high biological value of dairy milk have made it an important constituent of the balanced human diet. It is associated with better growth, improved status of some micronutrients, cognitive performance, motor development and activity. It is composed of a mixture of nutritive components as well as other bioactive factors such as biogenic amines, conjugated linoleic acid (CLA), with relevant physiological benefits. The consumption of dairy milk and products exert a protective action in human health and have been confirmed in preventing several chronic conditions like cardiovascular diseases (CVDs), some forms of cancer, obesity, immunomodulation and diabetes (Pereira, 2014). The chemical composition of bovine milk consists of 87% water, 4% to 5% lactose, 3% protein, 3% to 4% fat, 0.8% minerals, and 0.1% vitamins (Pereira, 2014).

1. Composition of Milk Fat

Bovine milk contains about 3.5 to 5% total lipid, existing as emulsified globules 2 to 4 μm in diameter and coated with a membrane, casein. The composition of milk fat is somewhat complex. Triglycerides constitute approximately 98% of milk fat, which is found in the milk globule, with the remainder being made up of di- and monoglycerides, phospholipids, cerebrosides, cholesterol, vitamins, tocopherols, carotene, and flavor components. Phospholipids are about 0.5 to 1% of total lipids, and sterols are 0.2 to 0.5%. These are mostly located in the milk fat globule membrane (Jensen et al., 1991). Cholesterol is the major sterol at 10 to 20 mg/dL.

1. Introduction

A confection is sweet tasting delicacies developed using sugar and other carbohydrates with optionally selected chocolate, nuts, fruits, vegetables or gums. Depending on the formulation, the confection may vary from sugar boiled hard lozenges to gum based soft gummy toffees, from chewing gums to mouth melting chocolates. The versatile and broad variation in the product created by differentiating flavours, ingredients and processing has greatly influenced the market demand of these products. Although confection is non-essential commodity but still relished by people of all economic strata and hence creating a great market space and scope of new products.

In confectionery research and development area, current popular sector is functional confections. The sector has been on the trends radar globally, accounting for 8% of the global confectionery market, and most accepted and successful in Japan.

1. Introduction

Each day, millions of people take a small bag, drop it into a cup, pour in boiling water, and add a dash of milk plus a spoonful of sugar. People start the day with it, end the day with it, and also serve it socially or in times of distress (Herath and De Silva, 2011). The reason behind its popularity is based on the fact that the combination of theanine amino acid contained in tea and melatonin and B-complex vitamins contained in milk offers superior relaxing effects. Furthermore, the harmony of tea’s sweet aroma and milk’s natural sweetness will create a healthy low calorie drink.

Tea is one of the most pleasant drinks consumed by two third of the world’s population. It is not only the most popular and one of the oldest known beverages in the world but also an antioxidative agent available in everyday life which may help to prevent a wide variety of diseases such as cancers and heart diseases (Yang and Landau, 2000; Luczaj and Skrzydlewska, 2005). Tea provides a significant source of phenolic compounds in the diet. While polyphenols have long been of interest for their contribution to the astringenttaste of teas (Ding et al., 1992), research into the health benefits of tea has been actively pursued only in more recent times (Dufresne and Farnworth, 2001; Yamamoto et al., 1997). Even though the results are mixed for the relationship between tea and health in epidemiological and clinical studies, in vitro studies point to a range of mechanisms by which tea phenolics may help to offset chronic diseases such as cancer and cardiovascular diseases (Kris-Etherton and Keen, 2002).

1. Algal Biomass

Algae is defined as heterogeneous assemblage of organisms that range in size from tiny cells to giant seaweeds, thus algae mostly are photosynthetic species which include eukaryotes and prokaryotic Cyanobacteria (blue-green algae) and live in aquatic habitats. They are ubiquitous in nature and are found in variety of environments ranging from soil, sand, marshes, brackish water, sea and fresh water. Most of them are capable of manufacturing their own food.

Microalgal research is offering wide potential in food biotechnology and is gaining more attention because of presence of wide range of bioactive and nutraceutical properties and added health benefits.The increasing population is one of the major growing concerns of today’s world. To meet the nutritional requirement of the rising population, researchers are looking for optional sources for food which are easy to cultivate, cost effective and produce large amount of bioactive compounds useful to prevent major diseases. Chlorella is unicellular green alga that is a potential source of nutrients like carotenoids, minerals, vitamins, and polyunsaturated fatty acids. Especially, omega-3 fatty acid and carotenoids have received considerable interests due to their roles in the prevention of chronic diseases. Lutein and zeaxanthin from Chlorella have been shown to be associated with eye health and function. Beta-carotene is known to reduce the risk of CVDs and certain cancers. Animal studies also demonstrated that Chlorella supplementation reduced the serum cholesterol levels.

Similarly, the blue green microalgae Spirulina, possesses diverse biological activities and nutritional significance. Regular consumption of Spirulina fortified food improves immune system by increasing phagocytic activity of macrophages, stimulating the production of antibodies and cytokines, increase accumulation of NK cells into tissue and activation and mobilization of T and B cells. Spirulina have also shown to perform regulatory role on lipid and carbohydrate metabolism by exhibiting glucose and lipid profile correcting activity in experimental animals and in diabetic patients. They were also found to be active against several enveloped viruses including herpes virus, cytomegalovirus, influenza virus and HIV. They are capable to inhibit carcinogenesis due to antioxidant properties.

1. Introduction

Fruit products have their unique identities having large content of micronutrients, polyphenols, vitamins, flavonoids and other nutritional compounds. Characteristic appearance and flavors distinguish among various fruit based products like juice, puree, jam, jelly, squash and other several varieties. Main concern of this fruit processing industry is the stability of the products throughout the post processing storage. Thermal treatment as mean of preservation of these products is the common process implemented so far. It ensures the safety of the product but lacks in retaining the nutritional intact that like of fresh fruit. Today’s consumer demand for minimally processed fruit products and “natural” fruit products tend to think of alternative thermal processing.

High pressure processing (HPP), a relatively new concept compared to conventional thermal processing, also sometimes known as high hydrostatic pressure (HHP), or ultra high pressure (UHP) processing, is a non-thermal food processing method that subjects liquid or solid foods, with or without packaging, to pressures ranging between 50 and 1000 MPa. HPP has already been established itself as an alternative to thermal processing. In food processing it is of great interest due to its ability to inactivate food borne microorganisms and enzymes, at low temperature, without the need for chemical preservatives and it is less detrimental than thermal processes to low molecular weight food compounds such as flavoring agents, pigments, vitamins, etc., as covalent bonds are not affected by pressure. Pressure-treated foods have sensory properties similar to fresh products, which is a major advantage in fruit processing as it matches consumer demand for healthy, nutritious and ‘‘natural’’ products. HPP of fruit products offers the chance of producing food of high quality, greater safety and increased shelf life (Hayashi 1989; Gould 1996; Butz and Tauscher 1998).

1. Introduction

The demand for non-dairy based beverages in form of non-dairy milk is on rise due to several reasons. Firstly, the prevalence of lactose intolerance and milk allergy amongst a major percentage of population who cannot consume dairy milk and look for alternate source of proteins. The need for functional drinks is also a major factor which contributes to the increase in demand of milk-alternatives. It has also been reported that milk processors around the world face an uphill battle, including the dominance of private labels; consumer concerns over the presence of growth hormones in non-organic milk; fluctuations in commodity prices; supply shortages for organic milk; and growing consumer concern about the safety of animal products in general. With that long list of challenges, the market has had few growth opportunities even though consumers continue to prize milk for its nutritional benefits.

2. Need for Non-dairy Beverages

2.1 Prevalence of lactose intolerance

Lactose intolerance is estimated to affect 33 % of the global population, but the prevalence of the condition varies from country to country. It is also estimated that an average of 75 % of human adults have decreased intestinal lactase activity after weaning (NDDI, 2012).

1. Introduction

There is a general consensus that fruit and vegetable consumption is a key factor for a balanced diet. Globally, majority of people consistently are consuming less than the daily recommended fruit and vegetable requirement. Even in developed nations e.g., Australia, Canada, Europe, UK and USA, researchers have concluded that there is large gap between actual and recommended consumption of both fruits and vegetables despite decades of concern and publicity while resultant outcomes were short-lived. In a study from 52 low and middle-income countries 77.6% of men and 78.4% of women consumed less than the minimum recommended servings of fruits and vegetables. Same study reported 74% low fruit and vegetable consumption among adults in India (Hall et al., 2009). In India, recent studies on the fruit and vegetable intake amongst urban residents was reported as 265 g per day as against 400 g per dayof fruits and vegetables excluding potatoes and other starchy tubers, that is recommended by the World Health Organization (WHO, 2008).

Epidemiological studies conducted in recent years have indicated a positive correlation between the consumption of fruits and vegetables and prevention of cancer and cardiovascular diseases. Health-promoting functional characteristics of vegetables are mainly attributable to their functional bioactive constituents. These effects can be listed as antioxidant activity, cholesterol-bindingcapacity, antidiabetic activity and angiotensin-converting enzyme (ACE) inhibitory activity. Studies conducted in cell culture models and animal models have revealed that bioactive compounds of plant foods, including soybean, hawthorn fruit, tea, buckwheat, oats, onion, garlic, almond, and vegetable juice, composed of tomato watercress, parsley, carrots, celery, lettuce, beets and spinach, have cholesterol-lowering activity (El-Shatanovi et al., 2012; Vadivel et al., 2011).

1. Introduction

Now a days, foods are not intended to only satisfy hunger and to provide necessary nutrients but also to prevent nutrition-related diseases and improve physical and mental well-being of the consumers (Menrad, 2003). In this regard, functional foods play an important role. The concept of functional foods which has evolved as the role of food in the maintenance of health and well-being and in the prevention of disease, has received increased scientific and commercial interest is recent past. Growth of functional foods markets include increased consumer health awareness, increased popularity of healthy foods, search for food-based drug substitutes, self-medication approach promoted by busy lifestyles and rapidly developing health conscious markets. Functional foods can be defined as foods “that can beneficially affect one or more target functions in the body, beyond adequate nutritional effect, in a way relevant to an improved state of health and wellbeing and/or reduction of risk of disease” (Stanton et al., 2005).

1. Introduction

Milk and milk products constitute essential dietary components for a vast majority of the population. India with annual production of more than 135.6 million tonnes has emerged as leading milk producing nation. The per capita per day availability of milk in India is more than 290 g. Buffalo milk accounts for 57% of the total milk produced in India. Ethnic dairy products account for 90% of all dairy products consumed (Aneja et al., 2002). Many health benefits have been attributed to fermented dairy products and probiotic microorganisms (Salminen et al., 1998). The market for functional foods, nutraceuticals, wellness foods and beverages is fast growing. The harmful effects of synthetic drinks have propelled health conscious consumers to go for natural and traditional drinks. In search of better returns, the Indian dairy industry is widening its focus to include traditional milk products, and these are emerging as new profit centres for the organised sector.

Traditional dairy products have several advantages. They require low capital investment and give high profit margin. They are more appealing to the Indian palate. Dahi or curd is the most popular indigenous fermented dairy product. There are numerous references to dahi in vedic literature. The Prevention of Food Adulteration Act (Anon, 1976) describes dahi as a product obtained from pasteurized or boiled milk by souring (natural or otherwise), using harmless lactic acid or other bacterial cultures. Indian dahi and its western counterpart yoghurt differ considerably in terms of cultures used and their bouquet and flavour profiles (Aneja et al., 2002). The major flavor compound in dahi is diacetyl. Dahi made from buffalo milk has a firm body and white glossy appearance, with a cream layer on top. Mixed mesophilic cultures of Lactococcus lactis subsp. lactis, Lactococcus lactis subsp. cremoris, Lactococcus lactis subsp diacetylactis along with Leuconostoc species are grown together for production of dahi.

1. Introduction

Fermented milk products such as yoghurt are produced through out world (Kurmann et al., 1992). Yoghurt can be characterized as a gel like coagulated milk product, having a smooth consistency and a pleasing flavour and is now widely consumed both by infant and adult populations. It is common that yogurt preparation involves the use of equal amounts of two lactic acid bacteria (LAB): Streptococcus thermophillus (St) and Lactobacillus delbrueckii ssp. bulgaricus (Lb); samples prepared with these starter bacteria are labeled Lb-St (Ng et al., 2011). In the early stage of the incubation process, Lb stimulates the growth of St releasing amino acids from casein (where the most important is valine) and producing a moderate reduction in pH due essentially to St. Yoghurt has better digestibility than milk and this is related to its comparatively high content of free amino acids. Besides nutritional value, it possesses hypocholesterolaemic (Mann, 1977) and antitumour effects (Odd et al., 1983; Reddy et al., 1983).Yoghurt may be set or stirred and has a potential for being used as dietary supplement for infants. So they cross the line between dietary supplements, health foods and conventional foods with great facility. Now a days, emphasis is given on sweeteners and more natural sweeteners will be used (Hollingsworth, 2001). Natural sweeteners can be easily incorporated in yoghurt by blending cattle milk with fruit pulps like mango. The enhancement of other nutrients e. g. vitamins and minerals will be added advantage. Mango pulp which contains a high proportion of sugar, mostly monosaccharide, is easily adsorbed by the digestive systems (Celik and Bakirci, 2003).

Soybean is a comparatively inexpensive source of high quality protein. The protein and fat contents in soybean are above 40 % and 20 %, respectively. Nutritionally, soy protein is a more balanced plant protein for human consumption. Studies have indicated that consumption of soy protein decreases total serum cholesterol and minimizes risks for several cancers (Anderson et al., 1995; Messina, 1997; Zind, 1998). The positive health benefits associated with soybeans have greatly increased its consumer awareness which has created a large market for soy foods (Ohr, 2000; Liu, 2000). The problem of beany flavour in soy products can be overcome by lactic acid fermentation (Buono et al., 1990; Granata and Morr, 1996). Soy solids are not only abandoned source of protein but also have therapeutic properties against breast, prostate, colon and lung cancers due to its isoflavones like genistein and daidzein content. Fortification with soy made yoghurt beneficial in lowering cholesterol level and blood pressure and in relieving symptoms of menopause and osteoporosis.

1. Introduction

Extrusion is one of the most preferred ways for creating the indulgence called ready-to-eat (RTE) snack foods with diverse shapes, sizes, colours and also nutritional and functional values which appeal to the diverse group of consumer with varied choices. In this chapter ready-to-eat extruded and puffed snacks are the focus covering the technology involved, criteria for ingredient selection, design of experiment, process modelling, effects of extrusion on physical, nutritional and functional quality of the snack; a few relevant case studies are also discussed.

1.1 Market for RTE snack foods

Indian cooking and lifestyle have undergone tremendous changes in the last 15 years. There are many major factors impacting this change which include, liberalization policy, dual income, separate living of couples, innovative kitchen applications, media proliferation, etc. The cooking style and eating habits in India varies drastically from southern part to northern part of the contry. Due to lifestyle pressure nowadays people prefer easy short way of cooking food rather spending too much time on cooking. Rapid urbanisation is also one of the reasons for people to buy such products. Snack foods comprise a very large variety of items including potato chips, crackers, nuts and extruded snacks, among others (Harper, 1981). Snack food extrusion includes subjecting selected raw material to a variety of complex physical processes to yield snacks with varied shapes and textures (White, 1994).

The RTE market in India was expected to expand to reach Rs. 2,900 crore by 2015, according to an analysis done by Tata Strategic Management Group (TSMG). The products may vary from noodles, pasta, masala packages, stuffed paratha, etc. and many more. There are many regional players who are making foray into ready-to-eat segment. Many national and international players like Nestle, Pepsico, ITC, Haldirams, Cavinkare, are already in Indian market with their products.

1. Introduction

1.1 Malnutrition

The term malnutrition generally refers both to under nutrition and over nutrition, but in this guide we use the term to refer solely to a deficiency of nutrition. Many factors can cause malnutrition, most of which relate to poor diet or severe and repeated infections, particularly in underprivileged populations. Inadequate diet and disease, in turn, are closely linked to the general standard of living, the environmental conditions, and whether a population is able to meet its basic needs such as food, housing and health care. Malnutrition is thus a health outcome as well as a risk factor for disease and exacerbated malnutrition, and it can increase the risk both of morbidity and mortality (Ogunrinade, 2014). A term used to refer to any condition in which the body does not receive enough nutrients for proper function. A person cannot properly digest or absorb nutrients from the food they consume, as may occur with certain medical conditions (Medicine, 2015). Malnutrition may range from mild to severe and life-threatening. It can be a result of starvation, in which a person has an inadequate intake of calories, or it may be related to a deficiency of one particular nutrient (for example, vitamin C deficiency).

Malnutrition is estimated to contribute to more than one third of all child deaths, although it is rarely listed as the direct cause. Lack of access to highly nutritious foods, especially in the present context of rising food prices, is a common cause of malnutrition. Poor feeding practices, such as inadequate breast feeding, offering the wrong foods, and not ensuring that the child gets enough nutritious food, contributes to malnutrition (WHO, 2015).

Pooled estimates report the prevalence of malnutrition among community-dwelling older adults of 6% and among hospitalized older adults of 39%. In developed countries, treatment of malnutrition is relatively inexpensive and effective: energy and protein supplementation using commercial “sip feeds” results in both weight gain and reduced mortality (Pereira et al., 2015). In 2013, one in four children under age five worldwide had stunted growth. Between 2000 and 2013, stunting prevalence globally declined from 33 to 25 %, and the number of children affected fell from 199 million to 161 million. In 2013, about half of all stunted children lived in Asia and over one third in Africa (UNICEF, 2015). Malnutrition may be several types as follows:

1. Introduction

1.1 Engineered health rice

Rice is one of the leading food crops in the world and sustains two-third of the world’s population providing 20% of the world’s dietary energy supply. It can be polished and marketed as white rice or can be marketed with the bran layer left intact as brown rice. The dry grain can then be steamed or boiled by the consumer to rehydrate and cook it (Kato, 2006). Despite its primary importance as a staple food, rice has several disadvantages. Primarily, rice is low in protein and high in starch. The low protein levels in rice can lead to protein malnutrition in societies where rice is the primary constituent of the diet. Deficiencies in essential amino acids may also result from a diet primarily comprised of rice. For example, lysine is the essential amino acid found in the lowest quantity in rice. The human body needs lysine for proper growth and repair of tissues. It is also important in the production of various enzymes, hormones and disease-fighting antibodies (Kato, 2006). The production of broken rice is nearly 15-20% of total production of rice (Bhullar and Bhullar, 2013). The broken rice is generally used for rice flour production and Indian traditional foods such as Idli, Dosa and weaning foods etc. Ugwu et al., (2012) reported that the rice broken can be utilized for the production of poly (3-hydroxybutyrate). The major value addition of broken rice is possible by reconstructing it into rice-shape and fortifying it with desired nutrients or micronutrients, which is a big challenge in terms of making the product acceptable to the consumers.

One approach to overcome the above mentioned challenges is to prepare artificial rice kernels or rice analogues by extrusion, in which the vitamins are embedded and consequently do not separate from the rice grains. This will utilize mainly the broken rice which is either discarded or sold at subsidized prices as the cattle feed. Furthermore, embedding makes extraction of the vitamin by rinsing or cooking more difficult and may provide a certain protection against oxidation, because the vitamins can be enveloped by a protective matrix (Steiger, 2010). The fortification of commercially produced staple foods allows exposed populations to benefit without making major changes to their eating habits (Kunz, 2009).The rice analogues prepared from extrusion can be used by addition of an appropriate proportion of water at a temperature ranging from 90°C-100°C, whereupon the rice product rehydrates within three minutes to obtain a product having the desired appearance and organoleptic properties to simulate natural rice grains (Harrow and Martin, 1982).

1. Introduction

Celiac disease (CD) is an immune-mediated enteropathy triggered by the ingestion of gluten in genetically susceptible individuals. Gluten is the protein component in wheat, rye and barley. In the last 10 years, cutting edge scientific developments in this disease have led to the formulation of new concepts of epidemiology, pathophysiology and clinical manifestations. At present, the only available treatment for CD is a strict gluten-free diet (GFD) (Mulder et al., 2013; Theethira and Kelly, 2014). Until recently, the geographical distribution of CD was mostly restricted to Europe and other developed countries, such as the United States, Canada and Australia. Celiac disease is not only frequent in developed countries, but it is increasingly found in areas of the developing world, such as North Africa (Malekzadeh et al., 2005), Middle East (Rostami et al., 2004) and India (Basu et al., 2014, Deora et al., 2014; Yachha and Poddar, 2007). New epidemiological studies have brought evidence that this disorder is common in many developing countries as well, showing that the ‘global village of celiac disease’ has indeed a worldwide distribution (Fasano and Catassi, 2001).

The only available treatment for celiac disease is the strict, lifelong avoidance of gluten. When gluten is removed from the diet, the small intestine will start to heal and overall health should improve (Fasano and Catassi, 2001). Traditional substitutes for gluten-containing grains have been rice, tapioca, corn, and potato. However, more nutrient-dense grains, seeds, nut flours, and legumes are being incorporated into the diet to provide an enhanced palatability, variety, and nutritional quality. These include sorghum, millet, teff, quinoa, amaranth, flax seed, and buckwheat.