eChapters

7.1 Introduction
Valorization in simple terms means to increase the value of a product, in economics it is usually through government and administrative actions. In the concept of waste management, it is defined as the process of reutilizing or making a new product of value from waste sources. Several kinds of wastes can be transformed into materials and energy of value, one such example is agricultural wastes. These agricultural wastes are eligible to be a base for manufacturing refined commodity (Capanoglu, Nemli and Tomas-Barberan, 2022) such as chemicals, adsorbents, pharmaceutical products, acids, chitosan, certain type of wax esters, pigments etc. or can be used in several industrial or domestic processes as an energy source, most commonly the production of bioethanol. Valorization greatly contributes to circular economy as materials are continuously renewed and reused, minimizing the need for virgin resources. By transforming agricultural wastes into value – added products, valorization helps to close the loop, ensuring that each by – product is put to use in an efficient, affordable and green way, thereby reducing the dependance on conventional waste management techniques such as landfills and incineration. Moreover, valorization has other benefits, including improved public health, development of newer industries in the material recovery and processing and waste management sector. It can also bring about social awareness about sustainable practices, fostering responsible consumption and waste disposal behaviors.
7.2 Types of Agricultural Wastes
Generally, agricultural wastes are organic. The most common types of agricultural wastes are biomass from rotten produce, crops, livestock carcasses, dead leaves, droppings from livestock and straws. These organic wastes have vast potential in being converted to value – added products through various methods without much additional treatment. Inorganic wastes such as heavy metals like Pb, Cu, Hg and Ba are also found in agricultural runoff containing pesticides, paints etc. Figure 7.1 (Omojola Awogbemi et al. 2022) provides various examples of agricultural wastes that are commonly used in the production of materials and energy.

Twenty first century is the century of entrepreneurship and every individual can be an agent for innovation and change. Entrepreneurship is regarded as one of the most crucial factors in the economic development of every region of the country. It widens the horizons of economic development even in the socially and industrially backward regions. Dynamic entrepreneurs are considered to be the agent of change in a society. Entrepreneurs play a very important role in generating new employment and setting up new business. The problem of poverty, inequality and regional imbalances can be tackled with the development of entrepreneurship. However, in all economic development activities more and more focus is being centered on entrepreneurship of the people. Entrepreneur has been now recognized as a concept, not only for starting industries but also in the development of dairy enterprise. In India, it is believed that tremendous latent entrepreneurial talent exists which, if properly harnessed, could help in solving many of the serious problems facing the country.

Introduction
Fruits and vegetables are an important part of the human diet as they provide the necessary nutrition, essential minerals, vitamins, antioxidants, dietary fiber, etc., required for maintaining proper health. India is the second largest producer of fruits and vegetables in the world after China. Comparison of area under horticultural crops during 2011-12 and 2021-22 indicate substantial improvement from 18.5 million ha to 27.6 million ha with a simultaneous increase in production from 215.04 million MT to about 333.25 million MT respectively in the country within a span of just one decade (Table 1.1). The credit for this spectacular growth in area and production goes to the sustained efforts of the central and state governments for the launch of several farmers’/ growers’ welfare schemes viz., National Horticulture Mission (NHM), Horticulture Mission for Northeast and Himalayan states (HMNEH), Mission for Integrated Development of Horticulture (MIDH); R&D support by the ICAR and State Agriculture & Horticulture Universities, extension agencies/Krishi Vigyan Kendra and proactive farmers and orchardists. However, the increase in production has still not kept pace with the improvement in infrastructure for post-harvest handling, management, processing, and value addition. Various studies still indicate that under normal conditions more than 15-20% of the produce goes to waste from production to consumption which in monetar terms accounts for huge economic losses. A recent study sponsored by the Ministry of Food Processing Industries Government of India and conducted by NABARD Consultancy Services has indicated that about 19.33 million MT worth Rs 58013.71 Crores of fruit & vegetables goes to waste annually as postharvest loss (4.87-15.05%) in various channels from harvesting to consumption (NABCONS,2022). The condition becomes even worse when there is a glut in the market, road blockades, or seasonal vagaries, and farmers are forced to leave their produce in the field itself without harvesting or dispose it at throwaway prices. Such a situation can, however, be controlled by diverting thisproduce to processing for conversion into a number of value-added products for its later use in human consumption. Thus, processing and preservation of horticultural crops have now become a necessity rather than a luxury.

Grafting is a horticultural technique. It is used commercially for many woody plants and some herbaceous plants. The purposes of grafting include asexual propagation, obtaining resistance to soil borne diseases, nematodes and unfavorable conditions, and improving fruit quality. Although there are advantages to grafting, graft incompatibility often prevents its practical use. Graft incompatibility occurs when the combination of scion and rootstock is inappropriate. The enormous range of genotype varieties used in grafting results in a wide range of physiological, biochemical and anatomical interactions between graft partners. Therefore, the causes and mechanisms of graft incompatibility vary according to graft combinations. Garner (1979) defined graft incompatibility as the failure to unite into a strong union, the failure to grow in a healthy manner, or premature death, when such failures could be attributed to differences between rootstock and scion.
 
The purpose of this review is to understand graft incompatibility as an aid to solving graft incompatibility problems. The symptoms and types of graft incompatibility are described, the causes and mechanisms of graft incompatibility are explored, and directions for future research are identified.

Programme evaluation requires a systematic sequence of activities through which programme objectives, implementation processes, outcomes and impacts can be examined using credible evidence. This chapter presents the practical process of conducting an evaluation from programme identification through the use of evaluation findings. It explains how evaluators identify the programme and its objectives, determine the appropriate stage and type of evaluation, and assess the technical, financial, operational and time feasibility of the evaluation. Particular attention is given to identifying and consulting key stakeholders because their perspectives, expectations and information are important for a relevant and participatory evaluation process. The chapter further addresses approaches to data collection, sampling, quantitative and qualitative analysis, interpretation and communication of findings. It emphasizes that evaluation findings should not merely be reported but should contribute to programme improvement, decision-making and learning. The chapter also considers the evaluation of evaluation itself, or meta-evaluation, as an important mechanism for assessing the quality, credibility and usefulness of evaluation processes and reports

Digitalization is transforming ice cream operations by connecting procurement, production, quality, cold chain, sales, distribution, finance, and management through integrated information systems. This chapter examines the transition from traditional manual operations to ERP-, AI-, IoT-, and data-driven management. It explains the costs of limited digitalization and the department-wise benefits of integrated systems, including better traceability, demand forecasting, inventory management, energy monitoring, cold-chain control, predictive maintenance, and profitability analysis. The chapter also explores artificial intelligence, business intelligence, IoT monitoring, and evidence from industry research. It emphasizes that technology alone is insufficient: standardized processes, accurate master data, user training, governance, and management discipline are essential for achieving measurable digital transformation.

Insecticide mode of action is divided in to four major chapters 1. Nerve & Muscle 2. Growth & development 3. Respiration & Energy production 4. Metabolic process 5. Unknown or Non-Specific (multisite inhibitors) (Source: IRAC). To understand the mode of action of insecticides, it is necessary to understand the function of nervous system and how it works in insect. The nervous system functions transmits information throughout the body. This system has three components: 1) Peripheral nervous system (PNS) to receive and transmit incoming signals (taste, smell, sight, sound, and touch) and to transmit outgoing signals to the muscles and other organs, effectively communicating them how to respond, and 2) Central nervous system (CNS) to interpret the signals and coordinate the body’s responses and movements. 3) Visceral or sympathetic nervous system (VNS) directly connected with the brain that supplies nerves to the anterior part of the alimentary canal (foregut and midgut), heart, and spiracles. Some additional nerves arise from posterior compound ganglion of ventral nerve cord (VNC) which supply nerves to the posterior part of gut and reproductive system.

Chromosome number and nuclear DNA amount are important biodiversity characters together provide a very powerful method for determining evolutionary relationships. Furthermore provide an estimate of relatedness between species that in turn suggest reasons underlying the success or failure of crosses, even for interploidy hybridization. It is expected that species that are cytogenetically most similar will be easiest to hybridize and produce viable interspecific offspring (Thomas, 1993). Hence, it is important to study karyotypes and other characters of the genome of the species involved in a breeding programme.

According to Jackson (1971) and Stebbins (1950) the karyotype is the phenotypic appearance of the somatic chromosomes in contrast to their genic content.

Technologies for cultivation of crops are changing over the years. Adherence to the principles of conservation, high input-use efficiency and higher productivity with optimum inputs and the very idea of crop production as a business venture; all these are leading to increased adoption of high technological (high-tech) crop production practises.

Abstract

This paper is the result of strong belief that if earth observation and geospatial techniques could be applied to a village to plan its natural resources in sustainable manner, the potential of this technique for common man is harnessed maximum. So analysis of one village natural environment, predicting its impact on humans, identifying certain possible inhabitable conditions due to existing nature & suggesting ways to utilize these conditions for sustainable human's and nature's existence  is the motive behind this work.

Ideas, materials, facilities, processes and labourare clubbed together to produce a worthwhile product-milksuccessfully and this may be the art and science of management. In otherwords, weput togethertheinputs-soil, labour, hay, fertility, silage into milk and such transformations are the result of a purposeful and pre-meditated action-management and not just by happenstance.

Decisionmaking role of dairy farm manager Manager of dairy farm decides :

• What to do !

• How to do !

• When to do !

For answeringtheabove, themanager mustplan to co-ordinate, organize, control and direct his supportive staff. For accomplishing his targets, the manager must gatherinformation about allresources available, applicationof newtechnologies, different options of market outlets and sources of capital credit needed. He should be able to establish targets to be achieved. Obstacles or ‘stumbling blocks’ are always there which hinder progress towards goals. Therefore, these have tobe identified.He shouldbe abletocomparealternative optionsof realizing targets, consideringtheeach one in terms of income potential, thecapital needed, the labour required. Then choosing the best plan of action and put that option into operation. The manager should be able to assume responsibility for the consequences of actions taken. Later, he should evaluate and measure results. His accomplishments maybe assessed in the light of standards of performance. Notonlythat, but alsoto keep a vigil on production level, labour efficiency, cost, investments etc. He must keep the operating system flexible so that he may take advantage of new developments to be applicable in his plans.

Introduction
Maize (Zea mays L.) is the second most widely crop grown globally after wheat, with 205 million hectares under cultivation. The area cultivated under maize is steadily increasing and expected to overtake that of wheat by 2030 (Erenstein et al., 2022). With production exceeding 1.2 billion metric tons, maize surpasses the production of other highly cultivated cereals like wheat and rice mainly due to its higher yields (Erenstein et al., 2022). Maize is cultivated in the Americas, Africa, and Asia, for multiple end-uses (Nuss and Tanumihardjo, 2010). It is a staple food in several countries across Africa and Latin America, and in a few countries in Asia, with an overall contribution of 15-20% of daily calorific needs (Shiferaw et al., 2011).
The global maize yield tripled from the 1960s with the average yield rising from 2 tons/ha to the current 5.8 tons/ha, mainly due to the adoption of highyielding hybrid cultivars and complementary input use (Erenstein et al., 2022). Maize is naturally an outcrossing species and inbreeding is unnatural. When maize is subjected to inbreeding and the resulting inbred lines from genetically distant backgrounds are crossed, hybrid vigor or heterosis is realized (Springer and Stupar, 2007). Hence, the development of the homozygous inbred lines is a very important step in hybrid maize breeding.
In the well-evolved maize breeding programs, the germplasm is well characterized into different heterotic groups where the hybrids developed by crossing inbred lines from different heterotic groups exhibit high heterosis (Ertiro et al., 2017a; Sang et al., 2022). For the development of inbred lines, maize breeders develop F1 populations by crossing two inbred lines within the same heterotic group (Prigge et al., 2011; Sang et al., 2022). Inbred lines are developed from the F1 population by recurrent self-pollination for 6-8 generations; this can take up to 3-4 years or even more, depending on the availability of off-season nurseries for generation advancement. The resulting inbred lines are highly homozygous (~98-99%), but not 100% homozygous. The doubled haploid (DH) technology emerged as a viable alternative to the time-consuming and resourceintensive recurrent selfing method to produce 100% homozygous inbred lines in just two crop seasons (Prasanna et al., 2012; Chaikam et al., 2019a).
In addition to significantly reducing the time taken to develop homozygous lines, the use of DH lines in maize breeding offers several other benefits: a) As DH lines are completely homozygous at all loci, they are stable and do not show further inbreeding depression; b) DH lines are also best suited for evaluating distinctness, uniformity and stability (DUS) criteria, thereby better facilitating plant variety registration and intellectual property protection (Röber et al., 2005); c) The use of DH lines facilitates selections on completely homozygous lines which is more reliable and effective compared to selections on segregating families with different levels of heterozygosity (Chaikam et al., 2019a); d) Use of DH lines also simplifies breeding operations like planting, managing the nurseries, seed shipments, record keeping, etc. as selfing nurseries spread over several generations are replaced by just two generations for DH line development (Prasanna, 2012; Röber et al.,

The history of evolution reveals that life on Earth has gradually gone enriching itself by adding more and more varieties to it. A variety of organisms as of today exhilaratingly blossoms in the biosphere. The organisms are divided into three broad categories based on their distinctive characteristics, viz. plants, animals, and microorganisms. The other broad categories all the organisms on Earth are placed in are the five kingdoms, viz. Protista, Monera, Fungi, Plantae and Animalia. These kingdoms encompass living organisms based on their cell type (prokaryotic or eukaryotic), cell number (unicellular or multicellular), genetic recombination type (binary fission, asexual or sexual type), or feeding behavior or mode of nourishment (autotrophic or heterotrophic).

Immunity

Immunity is the resistance of body against extraneous etiological factors of disease, which is afforded by the interaction of chemical, humoral and cellular reactions in body. This is an integral part of the body without, which one cannot think of life. During the process of evolution, nature has provided this defense mechanism in the bodies of all living creatures particularly of higher animals and man, that protects them from physical, chemical and biological threats. It can be classified as natural or paraspecific and acquired or specific immunity.

Natural/paraspecific immunity

There are some species which are resistant to particular diseases due to presence of natural resistance against them e.g. horse, pig, cat are resistant to canine distemper virus; dogs are resistant to feline panleucopenia virus, chickens are resistant to anthrax. Even within species, there is natural resistance that protects some individuals while others are susceptible e.g. Indian deshi cattle Zebu (Bos indicus) is quite resistant to piroplasmosis in comparison to Bos taurus. Besides, there are the mechanisms or barriers in body provided by nature.

Introduction

Microbes (bacteria, archea and eukarya) are single celled organisms that rule the planet. Microbes occupy every possible niche, from the high atmosphere to the deep ocean, from hot springs to artic ice, from hot deserts to deep forests including many regions that cannot yet be accessed for study. The biosphere contains between 1030 and 1031 microbial genomes, which is about 2-3 times more than the number of plant and animal cells combined (67). In fact, studies have shown that microbes associated with the human body are about ten times more than the number of human cells (5).  Microbes play a critical role in the life cycle of all living organism and environment in general.  Some microbes cause disease, but the most of them are either innocuous or play a role in physiology and cellular response including immune response, digestion and vitamin production of various organisms.

Endocrine glands are organs which secrete chemical substances called hormones into the blood stream. Hormones are substances produced by specific glands, secreted directly into the blood and transported to various organs and tissues where they exert their effects. The term hormone is derived from the Greek root meaning to excite. The organs/cells where there hormones bring about their actions are called target organs/cells. The target organs (hormone binding receptors) posses specific receptors for bringing about the action of these substances. The term neurosecretion signifies the production and reiose of hormones by nerve cells that have the cytological characteristics of secretory cells.

Several hormones are the product of nervous mechanisms hence the term neurosecretion is used and neurohumour for such substances.

Hormones act as a mode of transmitting information in the body in addition to the nervous system. Their mode of action is slow but more prolonged. Chemically the hormones are either proteins or steroids. Hormones are secreted in very small amount but their actions are profound. Early investigators were hampered by the non availability of suitable methods for their estimation. The availability of radioimmunoassay, radio-receptor assay, enzyme linked immunological assay have greatly facilitates researches in the field of endocrinology.

The mode of action of these hormones has been elucidated in several instances. Involvement of membrane permeability and cyclic AMP has been implicated in several cases.

Most of these hormones have been of therapeutic interest for several decades. The mode of administration of steroid hormones can be both oral or parenteral while protein hormones are active only when injected. Several of these hormones are used for increasing the production potential of meat animal, for improving the reproductive efficiency of domestic animal, hence are of direct economic importance to the farmers. Chemical characterization and their synthesis including their more potent analogues in several cases, have greatly facilitated their widespread application in the animal production and animal health strategies.

Endocrinology is the study of the structure and function of the endocrine glands and their secretory products, including the consequences of excessive or deficient production of these hormones.

1665 Robert Hooke had successfully invented the microscope. Because of this discovery, Robert Hooke was the first one to have a close look of a cell appears to be. His description of these cells was published in Micrographia. However, the cell walls observed by Hooke gave no indication of the nucleus and other organelles found in most living cells.

1674 Anton van Leeuwenhoek witnessed a live cell (plant) under a microscope.

1775 Antoine Lavoisier first proposed a mechanism for photosynthesis, a process wherein plants plants take in carbon dioxide and release oxygen. Lavoisier was also the first to investigate cell respiration in animals.

1777-83 Chemistry became dominated by the phlogiston theory, or the hypothetical principle of fire wherein all the combustible material was part composed. In this principle, burning (oxidation) was caused by liberating phlogiston, with ash as the dephlogistigated substance.

1836 The proponent of the cell theory in Biology, Theodore Schwann, proposed that the process of fermentation is solely limited to living yeast cells in 1836. Liebig did not agree to this and instead, he proposed another alternative theory of fermentation.

1856 Louis Pasteur opposed Liebig’s chemical theory. In his experiment, he showed that fermentation depends highly on the physiological functions that occur in bacteria and in living yeast cells. This work of Pasteur in 1856 received general recognition.

1860s The view on the chemistry of life highly different from the chemistry of nonliving things. During this period, the view is that the gelatinous and homogenous form of matter in organisms or more commonly known as the protoplasm carries out all the intracellular processes. These include respiration, biosynthesis of molecules, and the breakdown of matter.

Single strand conformation polymorphism (SSCP), or single strand chain polymorphism, is defined as conformational difference of single stranded nucleotide sequences of identical length as induced by differences in the sequences under certain experimental conditions. This property allows to distinguish the sequences by means of gel electrophoresis, which separates the different conformations.

Background

A single nucleotide change in a particular sequence, as seen in a double stranded DNA, cannot be distinguished by electrophoresis, because the physical properties of the double strands are almost identical for both alleles. Contrarily, after denaturation, single stranded DNA undergoes a 3- dimensional folding and may assume a unique conformational state based on its DNA sequence. The difference in shape between two single-stranded DNA strands with different sequences can cause them to migrate differently on an electrophoresis gel, even though the number of nucleotides is the same. Predictability, however, is a shortfall of SSCP - since conformational states are subject to many experimental conditions and sequence differences that cause minimal changes in strand conformation may not be detected.