eChapters

Food is the basic requirement for maintaining the life process. Plants supply the bulk of foods required for human and animal. With limited cultivable area and ever increasing pressure of human population, the demand for food is constantly rising which can not be alone met by conventional plant breeding technologies. Novel techniques like plant genetic engineering are gaining momentum for production of superior plants or yield enhancement of a species.  It has been observed that the most commercially successful application of recombinant DNA technology is in genetic engineering of plants, which led development of multinational seed companies deriving monetary benefit from genetically modified crop and food products. From production of herbicide resistant or insect pest tolerant plants to alter the inherent quality composition of human food, plant genetic engineering has established firmly the commercial viability of recombinant DNA technology.

Jalshakti: It is a material (starch based polymer) which can absorb and hold 80-100 times its weight of water. It is a gel on which plant roots lock themselves and tap the water. It can be used on most soils and in all composts to promote vigorous growth and minimise plant stress. It is used by mixing with growing medium at the rate of 1-2% by weight. Plant roots attach themselves to hydrated granules of the chemical and tap their water store. Jalshakti reduces watering needs.

Jam: Concentrated fruit pulp with natural fruit flavour where pectin imparts a good set and high sugar concentration (68%) facilitates its preservation.
 
Jungle: The general Indian term for forest.

X₁, X₂, X₃ : The symbols used to designate the first, second and third generation of X-ray treated plants/seeds.

Xanthophyll : A carotenoid plant pigment (carotene), yellowish in colour, present in chloroplasts and other plants parts where chlorophyll is absent, It assists in photosynthesis.

Xenia: i) The direct influence of foreign pollen on the endosperm due to phenomenon of double fertiliztion which may allow the male parent to affect the appearance of seed. ii) Changes due to effect of foreign pollen in visible characters of endosporem, e.g. Maize- when variety with white endosperm is pollinated by one with deep yellow endosperm, endosperm of resulting seed is pale yellow.

Yaw: Aircraft rotation around the vertical axis (NCRST).

Yeasts : Unicellular micro-organisms, (fungi) producing zymase (enzyme), which converts sugars into alchohol and CO₂. A single-celled ascomycete fungus, economically important in capable of fermentation and an important source of vitamins.

Yield: Plant part harvested and the quantity of it. In agriculture, necessarily related to a specified crop or crops or to a group of animals or to an area, and to a period of time. For multipurpose trees, the amount of each specified part harvested. See also Production.

The method described here gives an approximate thioglucoside and isothiocyanates contents in rapeseed meal.

Reagents and Apparatus
    1.    Barium chloride (5% solution)
    2.    Volumetric flask, 600 ml
    3.    Steam bath

Method

To 10 g meal (defatted by soxhlet extraction) add 250 ml distilled water, hydrolyse at 54ºC for one hour and then boil for two hours, keeping volume constant. Filter, retaining filtrate and wash residue three times with 50 ml hot water. Add washings to initial filtrate and make up volume to 600 ml. Precipitate barium sulphate by heating and adding excess barium chloride solution. Leave on a steam bath for a few hours and then filter. Ash in muffle furnace and then weigh precipitate.

Complete fracture- It is a fracture in which there is complete loss of bone continuity and the bone is divided into two or more fragments (Fig.1).

Green stick fracture- It is the fracture in which, the cortex opposite to the bending force fractures completely, while the cortex under the force remains in tact, commonly seen in immature animals, (Fig-2)

Overriding fracture-A fracture in which the fragments lie side by side, causing shortening of limb (Fig-3)

Transverse fracture-The fracture line here runs transverse to the long axis of bone. Such type of fracture is caused by bending forces (Fig-4).

Oblique fracture- In this the fracture line runs oblique to the long axis of the bone. Such type of fracture is caused by bending with axial compression (Fig-5).

Spiral fracture-Here the fracture line spirals along the long axis of bone. Such type of fracture is caused by torsion, twisting or rotational forces e.g. in humorous (Fig-6)

Comminuted fracture- In this fracture, at least three fracture lines inter connect each other at one point (Fig-7).

Definition : These are the splints made out of light metal rods or bamboo for correction and immobilization of middle and higher level fracture in animals.

Large animal orthopedic patients are often managed with modified Thomas splints and to achieve an acceptable outcome with this device the following points should be kept in mind.

Animals initially find discomfort with the splint and try to reject it by kicking and often show violent movements. Hence initial acclimatization with the device by close observation and supervision of the patient is essential.

Recumbent animals should be supported in standing position by a sling and they should be managed with the principle “12 hrs on sling and 12 hours on floor”.

Movement of the animal should be restricted.

Definition

Wound with infection with 6 hours of occurrence can be brought to non infected stage by flushing.

Procedure

The infected wound at fracture site is cleaned / flushed thoroughly using sufficient quantity with antiseptic solution.

The site is applied with topical antiseptic / antibiotic and the size of the wound is reduced by placing interrupted stitches for skin closure.

For drainage of inflammatory fluid, the counter opening is made as the distal part of the swelling of the dependent part of flushing catheter is placed inside to carry out regular flushing of the wound without removing the immobilizer.

The fracture site is immobilized as per the conventional procedure using POP cast leaving two window over the opening of counter opening site.

Indicaton: Irreversible damage of both the bovine digits & to provide a foot pad for comfortable walking of animal

Indication: Irreparable damage of metacarpal bone.

Definition : It is a technique in which foreiirnb is amputed from elbow joint. Indication : Incurable damage of radius ulna.

Aim of Rehabilitation

To assist the animal to stand.

To facilitate normal respiration in animal.

To ensure normal feed and water Intake.

To ensure that rumination,defaecation and urination are normal.

Family : Euphorbiaceae

Flowering: July-September

Fruiting: September-December

Botanical description: The plant is a small erect herb, growing up to 60 cm or more. The ascending branches are angled and velvet-hairy. Leaves are broadly ovate, nearly triangular, rather coarsely toothed. Leaf stalks are as long as or longer than the 3-5 cm long blades. Flowers are stalkless, borne on erect axillary spikes longer than the leaves. Male flowers are minute, crowded distally. Female flowers are scattered along the inflorescence axis, each subtended by a conspicuous semicupular leaf-like toothed green bract nearly 7 mm long. Capsule is bristly and1 mm broad.

Ecology: It is mostly found in hot, low to medium altitude, sandy margins of rivers, seasonal water courses and pans, usually in shade of thickets, on rocky hillsides and often in disturbed ground and as a weed of cultivation.

The sense organs are the organs of the body that respond to external stimuli by conveying impulses to the nervous system. The sense organs allow animals to sense changes in the environment around them and in their bodies so that they can respond properly. Animals can sense a wide range of stimuli that include the sense of vision, the sense of hearing, the sense of olfaction (smell), the sense of taste and the sense of touch including pain and pressure. In animals, there are two major groups of senses, the general senses and the special senses.

Jasmonic acid: Jasmonic acid is derived from the fatty acid, linolenic acid. It is a member of the jasmonate class of plant hormones. It is biosynthesized from linolenic acid by the octadecanoid pathway. The major function of JA and its various metabolites is regulating plant responses to abiotic and biotic stresses as a well as plant growth and development processes.

Ketose: A simple sugar in which carbonyl group is a ketone.

Kinases: Enzymes that catalyse phosphorylation of an acceptor molecule such as protein molecule by ATP.

Q₁₀ (Temperature coefficient): The ratio of the rate of chemical reaction at a particular temperature to the rate of that chemical reaction exactly at 10°C lower.

Qualitative photoperiod: Qualitative plants are those in which a particular photoperiod is an absolute requirement for the occurrence of a response. Ex: Common cocklebur

Qualitative response (absolute response, obligatory response): A plant response, usually flowering, that absolutely depends on some day length, temperature, or other environmental stimulus. If the plant does not experience the required stimulus, the response does not occur (e.g., the plant remains vegetative). Opposite to quantitative response.

Quantasomes : Quantasomes are particles found in the thylakoid membrane of chloroplasts in which photosynthesis takes place. They are embedded in a para crystalline array on the surface of thylakoid discs in chloroplasts. They are composed of lipids and proteins that include various photosynthetic pigments and redox carriers.

Ubiquinone (UQ): It is a lipophilic metabolite that functions in the electron transport chain in the plasma membranes of prokaryotes, and the inner mitochondrial membranes of eukaryotes, apart from its roles as an antioxidant and in the regeneration of tocopherols. Also called as Coenzyme Q.

Ubiquitin: It is a small protein that is found in almost all cellular tissues in all eukaryotic organisms,( i.e. it occurs ubiquitously) which helps to regulate the processes of other proteins in the body.

Ultracentrifuge: A high speed centrifuge with speed upto 60,000 rpm and centrifugal field of 500,000 x g

Xanthophylls (Carotenoids): These are tetraterpenes with general formula C₄₀H₅₆O₂. Xanthophylls are a class of oxygen-containing carotenoid pigments, responsible for the color of many of the yellow, orange, and red hues of flowers, fruits, vegetables (corn, pepper, etc.), egg yolks, and feathers, shells, or flesh of many animal species (flamingo, canary, shrimp, lobster, chicken, or salmonids). In plants, they are involved in photosynthesis with chlorophyll and are responsible for the red, yellow, and/or brown colors of autumn foliage as the chlorophyll levels decline.

Xeromorphy: Morphological characteristics, such as small, tough leaves, a heavy cuticle, etc., that are generally important for adaptation to dry environmental conditions.

Yamogenin: A triterpene plant steroid belonging to a group of sapongenins that is obtained from Dioscorea and is used in making oral contraceptives.

Z scheme: Refer non-cyclic electron transport.

Z-DNA: A duplex DNA structure in which helical coiling of the two polynucleotide chains is left handed and phosphate backbone of the polynucleotides follows a zig-zag course.

Zeatin: Most abundant natural cytokinin present in plant.

Moisture present in the atmosphere plays a significant role in weather and climate of the region. There are three major components in the atmospheric moisture.

  I. Humidity

 II. Precipitation

III. Evaporation.

Humidity: The terminology related to humidity and concerned with gaseous form of water i.e. water vapour, several expressions of the amount of water vapour in the air is used. They are as follows.

Cloud usually consists of very small droplets of water which cannot fall appreciably below the cloud base without evaporation. In this condition clouds are stable. Rain drops are about a million times heavier than cloud drops and rain develops only if the cloud droplets grow by some mechanism. Cloud Seeding mechanism depends on the difference in vapour pressure over ice and super cooled cloud, water evaporates of the droplets and migrate to the ice crystal, which grows and begins to fall increasing their growth rate by coalescence with other droplets and eventually melting and falling as rain drops. Presence of ice nuclei determines whether ice crystals form in a supercoold cloud or not. Ice crystals form on naturally occurring nuclei at temperatures of – 10⁰ to 30⁰ C. At warmer temperatures, either the efficient ice-forming nuclei are often deficient in the atmosphere or the cloud may occur with tops supercooled but not to an extent which activates the ice nuclei available. It should be possible to initiate precipitation by introducing ice crystals or by supplying artificial nuclei.