eChapters

Apomixis was defined by Winkler as replacement of the normal sexual reproduction by asexual reproduction, without fertilization. This definition notably does not mention meiosis. Thus “normal asexual reproduction” of plants, such as propagation from cuttings or leaves, has never been considered apomixis, but replacement of the seed by a plantlet, or replacement of the flower by bulbils are types of apomixis. Apomixis deviates from sexual reproduction in several aspects: modification or complete omission of meiosis, formation of unreduced megaspores, parthenogenetic development of embryo, and autonomous, or pseudogamous, endosperm development (Ramulu et al., 1998). Apomixis produces embryos or seed progeny that are exact genetic replicas of the mother plant. The main advantage of apomixis over sexual reproduction is the possibility to select individual plants with superior characteristics and to propagate them clonally through seeds. Apomictically produced offsprings are genetically identical to the parent plant. In flowering plants, the term “apomixis” is commonly used in a restricted sense to mean agamospermy, i.e. asexual reproduction through seeds.

Apomixis is an asexual method of reproduction through the seed. Apomictic reproduction is widespread and found in over 300 species of plants in 30 families. Interest in apomixis as a reproductive mechanism has increased as its potential and role are being recognized in genome preservation, polyploid build up, propagation of derivatives of wide crosses, permanent fixation of hybrid vigour, evolution, speciation and plant breeding .

Winkler (1906) defined apomixis as “the substitution for sexual reproduction of another asexual reproductive process that does not involve nuclear or cellular fusion.” One of the chief barriers to an understanding of the apomictic phenomenon has been the highly complex terminology as well as the differences of opinion among specialists as to the correct usage of these terms, probably because the phenomenon by itself is complex and in many ways quite different from that of amphimixis. Convincing evidence for the presence of apomixis can be obtained by tracing the steps that are involved in embryonic development. It should be amply clear that as the prerequisite for apomixis, fertilization does not take place at all in any form. Thus there is no normal development of embryo from the egg cell. However, the embryo may develop from an unfertilized egg cell other than the egg cell within the embryo sac.

Apomixis is widely distributed among higher plants. More than 300 species belonging to 35 families are apomictic. It is most common in Gramineae, Compositae, Rosaceae and Rutaceae. Among the major cereals like maize, wheat and pearl millet have apomictic relatives.

1. APOMIXIS

Development of seed without fertilization. When the seed formation occurs without sexual fusion, the process is known as apomixis. This occurs by several mechanism, however all apomitic seed have genetic material only from the female plant Apomixis may or may not require pollination and pollen tube germination to initiate seed formation, however sexual union.

5.1 APOMIXIS

Apomixis is derived from two Greek words “Apo” (away from) and “mixis” (the act of mixing or mingling). It refers to the occurrence of an asexual reproductive process in the place of normal sexual processes involving reduction division and fertilization. During sexual reproduction, developmental steps occurring inside the ovule produce the female gametophyte (embryo sac) and following a double fertilization event give rise to embryo and endosperm structures. Apomixis can be best described as the reference to the asexual process. In some species, embryo sac is produced not as a result of meiosis and fertilization but by certain asexual processes. The occurrence of such asexual reproductive process in the place of normal seed reproductive processes of reduction division and fertilization is known as Apomixis. Such seedling plants produced in this manner is known as apomicts. ’’Apomixis’’ is used synonymously with ’’agamospermy’’ (Stebbins 1950), referring to the asexual production of seed.

Apomixis (asexual seed formation) is a phenomenon in which a plant bypasses the most fundamental aspects of sexual reproduction—meiosis and fertilization—to form a viable seed. Plants can form seeds without fertilization, and the seed genotype is consistent with the female parent. The development of apomictic technology would be revolutionary for agriculture and for food production as it would reduce costs and breeding times and also avoid many complications typical of sexual reproduction (e.g., incompatibility barriers) and of vegetative propagation (e.g., viral transfer). The application of apomictic reproductive technology has the potential to revolutionize crop breeding. Apomixis is widely distributed among higher plants. More than 300 species belonging to 35 families are apomictic. It is most common in Gramineae, Compositae, Rosaceae and Rutaceae. Among the major cereals maize, wheat and pearl millet have apomictic relatives. Apomixis is reproduction where only one parent passes genes to the offspring (King, 2006). Apomictically produced offspring are genetically identical to the parent (clones).The method is mostly seen in plants, especially flowering plants. Apomixis was defined by Hans Winkler (2008) as the replacement of the normal sexual reproduction by asexual reproduction, without fertilization. Propagation from cuttings or leaves, is not apomixis. Natural replacement of the seed by an asexual method is apomixis.

1). Scab
Diagnostic Symptoms
• Symptoms generally noticed on leaves and fruits.
• Affected leaves become twisted or puckered and have black, circular spots on their upper surface.
• On the under surface of leaves, the spots are velvety and may coalesce to cover the whole leaf surface. Severely affected leaves may turn yellow and drop.
• Scab can also infect flower stems and cause flowers to drop.
• Lesions later become sunken and brown and may have spores around their margins.
• Infected fruit become distorted and may crack, allowing entry of secondary organisms(Figure-1).
Etiology
Scientific Classification
Kingdom : Fungi
Division : Ascomycota

• Seeds stratification at 4-7°C for 60-90 days from December to February.
• Scions cannot be used for grafting at their active stage of growth.
• Meadow orcharding: 20,000-70,000 plants/ha (Super high density)
• Bitter pit of apple: Golden delicious, yellow (due to calcium) Newton.
• Internal browning: Newton
• Himachal Pradesh is known as the “Apple bowl of India”
• Flower colour: White to Pink
• Apple is the most widely grown temperate fruit in the world
• India rank 5th in apple production in the world
• Apple crop accounts for 55% of the total area and 75% of the total production of temperate fruits in the country.
• 25% to 33% of pollinating trees in India are recommended for regular cropping.
• San Jose scale was introduced in India from France in 1906.
• Apple cider-fermented wine is prepared from apples.

It is a serious disease of apple which not only reduces the quality and size of fruit but also cause premature fruit drop and defoliation. Fruit loses its marketability due to poor quality. It also reduces storage time and cause loss up to 70%.

Plant diseases are a threat to world agriculture. Significant yield losses due to the attack of pathogen occur in most of the agricultural and horticultural crop species. More than 70% of all major crop diseases are caused by fungi . Plant diseases are usually handled with applications of chemicals. For some diseases, chemical control is very effective; but it is often non-specific in its effects, killing beneficial organisms as well as pathogens. Chemical control may have undesirable effects on health, safety and cause environmental risks. A promising method for protecting plants against diseases is constructing and employing pathogen-resistant cultivars. Although a number of resistant cultivars have been developed through breeding programs, these cultivars become obsolete in a short time due to the rapid evolution of the phytopathogens and the emergence of virulent forms capable to overcome the plant resistance. Breeders are often confronted with the issue of using a limited number of plants in their breeding programs, undesirable traits transferred together with the valuable resistance genes, and, in recent years, also with the depletion of potential gene sources. Control of diseases is a subject of great interest for biotechnologists. The most significant development in the area of varietal development for disease resistance is the use of the techniques of gene isolation and genetic transformation to develop transgenic resistance to fungal, bacterial and viral diseases. Improvements in genetic transformation technology have allowed the genetic modification of almost all important food crops like rice, wheat, maize, mustard, pulses and fruits. Genetic engineering technology has proved to be beneficial in managing viral and bacterial diseases in plants. The advances in gene engineering technologies and the understanding of the molecular nature of plant protection mechanisms have provided means for developing principally new strategies of plant disease control, in addition to the traditional approaches based on employing chemicals or classical breeding schemes. Biotechnology will enhance our understanding of the mechanisms that control plant’s ability to recognize and defend itself against disease caused by fungi. The integration of biotechnology with traditional agricultural practices will be the backbone for sustainable agriculture.

Mushrooming population, subsiding agricultural resources; land and water, people’s concern towards quality of vegetable s/food and changing climate throws several challenges for vegetable production. Conventional management and crop improvement strategies alone can no longer sustain the nation’s as well as global demand. So there is an urgent need to adopt modern biotechnological methods which are multidisciplinary where a large number of tools and elements of conventional breeding technique, genetic engineering, molecular biology, molecular genetics, bioinformatics and biochemistry are utilized and integrated. Biotechnological tools provide three major aspects of genetic improvement viz, application of tissue culture, molecular breeding or marker assisted breeding and genetic engineering.

Appropriate selection of fungicides and application at appropriate doses and times are of great importance in the management of crop diseases. A basic requirement of the application method is to get the fungicide to a location where the active ingredient prevents fungal damage to the plant. The fungicidal application varies according to the nature of the host part diseased and nature of survival and spread of the pathogen. The method which are commonly adopted in the application of the fungicides are discussed.

1. Foliar or vegetative application

2. Soil application

3. Seed treatment

Key words : Integrated Watershed Management (IWM), GIS, DTM, Watershed Delination, Water Quality Modeling, RS, DSS, Ground Water Information System (GWIS).

Introduction

The availability of land and water resources has a major effect on the economic and ecological aspects of life everywhere around the world. As a result, the need to develop better tools for efficient land and water resources management has become very vital. For quicker, reliable and precise results, it is necessary to use the geospatial tools and techniques such as Global Positioning Systems (GPS), Geographic Information Systems (GIS) and Remote Sensing (RS) image interpretation and analysis techniques to manage the natural resources. The application of these tools and techniques not only facilitates timely and repetitive analysis of all the topological features, but also assists in development of Decision Support Systems (DSS) to generate alternative scenarios for optimal use of the natural resources in the long term. The optimal use of these resources through integrated management of land water and vegetation leads to enhanced production and productivity of food, fodder, fiber, fuel, fish, flower and forest resources. Moreover, the holistic management of the resources to produce these outputs is plausible and manageable within the watershed systems, which are hydro geological units from which the runoff resulting from precipitation flows past through a single outlet to downstream locations. The systematic management of land, water, vegetation and livestock resources within the watershed systems is termed as Integrated Watershed Management (IWM). Broadly, IWM can be defined as a multidisciplinary, holistic way of protecting and managing a watershed’s natural resources to enhance biomass production in an eco-friendly manner. The watershed is viewed as a hydro-geological complex and dynamic ecosystem in which natural and anthropogenic processes occur and interact resulting in generation of runoff at the watershed outlet.

Introduction

Natural Disasters are inevitable, and Indian subcontinent is prone to all type of Natural Disaster either it is flood, drought, cyclone, earthquakes, tsunami or forest fires etc. Disasters can be classified in several ways. A possible sub-division of disaster is: (i) Natural Disasters; (ii) Human made disasters; (iii) Human induced disasters. Another sub-division is related to the main controlling factors leading to a disaster. These may be meteorological, geomorphological/geological, ecological, technological, global environmental and extra terrestrial. Another useful distinction that can be made between disasters is regarding their duration of impact and the time of forewarning. Some disaster strikes within a short period with devastating outcomes; others have a slow onset period with equally or more serious repercussions. According to the available statistics 60% of the total area of Indian subcontinent is venerable to seismic activity of varying intensities, 16% of the country’s total area is drought prone. In India 68% of total sown area of the country is drought prone. Coastal areas of India is exposed to tropical cyclones, tsunami in recent years and among all the disaster occur in the country, River floods are the most frequent and often the most devastating.

Black Pepper and Pearl Millet Flour for Disease Control in Chickens: To treat a disease in chickens characterized by frothing at the mouth, frequent cackling, restlessness, and reduced food intake, 10-15 black pepper corns are ground and mixed with pearl millet flour and water to form small pellets. These pellets are fed to the chickens to increase body heat and help eliminate the disease (Sabarkantha, Gujarat) (Parmar, 1992a).

Use of Garlic Against Pulorum in Poultry Birds: To cure chicks affected by Salmonella pulorum, one or two peeled cloves of garlic (Allium sativa) are soaked in a cup of water for 12 hours. The water is then given to the chicks to drink, curing them in two days (Dahod, Gujarat) (Khant, 1999).

Poultry Disease Management: For treating an unidentified disease in poultry birds that kills them within a few days, tribals use various plant-based remedies:

1. Bark of ‘beda’

2. Small pieces of onion

3. Grains of paddy smeared with kerosene

4. Tuber of ‘dev-alad’ (Curcuma spp)

11.1 Control of Diarrhea in Animals Using Traditional Remedies

1. Strychnos potatorum Leaves: In Dahod, Gujarat, approximately 100g of kantas (Strychnos potatorum) leaves are crushed and soaked in water. This mixture is given to the ailing animals for three days (Sitaram, 1997).

2. Ventilago denticulata and Syzygium cumini Mixture: In Bori, Shahera, a mixture of asul (Ventilago denticulata) roots and jamun (Syzygium cumini) bark is crushed and administered with water to the suffering animal. This treatment typically cures diarrhea within 2-3 days. Asul is a creeper found year-round in hedgerows, and jamun is a common tree (Dalsukhbhai, 1993).

3. Decoction of Soymida febrifuga: In Shahera, Gujarat, fresh leaves of royan (Soymida febrifuga) are crushed and soaked in water for one hour. A 100-150 ml dose of this concoction is given to the animal, which usually brings relief within 24 hours. This remedy has a long history in the region (Dalsukhbhai, 1993).

4. Ficus hispida: In Panchmahal, Gujarat, roots of dedhumari (Ficus hispida) are washed, crushed, and soaked in water for one hour. The mixture is then filtered through cloth, and 100-200g of the filtrate is administered to the animal. The treatment typically takes effect within a day and completely cures the animal in about 2-3 days. Many farmers use this method, although they may also consult veterinary experts (Baria, 1993).

5. Umra Bark and Banana Plant: During the monsoon, diarrhea in animals is treated using umra bark and banana (Musa Paradisiaca) plant sap. About 500g of umra bark is pounded and mixed with 500ml of banana stem juice. The mixture is filtered, and the filtrate is given to the affected animal. One hour later, the animal is fed 250ml of groundnut oil, resulting in a cure within a day or two (Valsad, Gujarat) (Patel, 1996).

1. Use of banana pseudostem in fish pond to enhance productivity of f ish: Pseudostems of banana, after harvesting the bunch, are added to the pond by cutting longitudinally, which increases the pH and oxygenation of pond water. This practice increases the fish yield. As it involves low cost, it is being followed by 80% of the farmers in Bastar village of Balasore district in Odisha.

2. ITKs on Craft and Gear Making / Maintenance (Vipinkumar et al., 2013): The major ITKs of scientific rationale identified in the craft and gear making and maintenance were ‘Sardine oil smearing on craft wood for improving the durability’, ‘Smearing cashew kernel oil on craft wood for durability’. Similarly, the durability of cotton nets was believed to be improved by dipping in banpu bark decoction. In the same way, beating nets with thalampu plant for ensuring strength was another one identified in craft and gear maintenance. The scientific validity assessment indicated that the boats of about 6.5 ft size length and 4.5 ft width require 3.5 to 4 litres of oil of sardine. The oil coasts about Rs 70/- per litre. Three cosequitive coatings followed by natural drying under sun are required for good results. Cashew smearing: The boats of about 6.5 ft size length and 4.5 ft width require 3.5 to 4 litres of cashew nut oil and the oil costs about Rs 40 -50/- per litre. Here also three cosequitive coatings followed by natural drying under sun are required for good results. Smearing Cashew kernel oil on craft wood for durability in Karwar of Karnataka is shown in photograph 1. For improving durability of nets, dipping nets in banpu bark decoction was practiced. The thalambu beating is nowadays not practiced due to the non-availability of those items. Instead, fisherfolk use a powder available in the market especially in the net shops. 1 kg of the colour powder (red/ blue) is required for 1 kg of net. The advantage is that the wastage due to mud coating and dirt can be rectified to a great extent.

Introduction
Open-source software has revolutionized the way individuals and industries approach digital content creation, offering high-quality, community-driven solutions without the cost of proprietary software. Among the most popular open-source tools for graphics and 3D modeling are GIMP (GNU Image Manipulation Program) and Blender. Both programs provide powerful capabilities for creating, editing, and enhancing visual content. This chapter delves into the application of GIMP and Blender, exploring their key features, workflows, and how they can be utilized across various fields of digital production. This chapter explores the capabilities and applications of two prominent open-source software tools: GIMP (GNU Image Manipulation Program) and Blender. These software tools are transformative in the fields of digital design, animation, and media production. The chapter provides an overview of their features, real-world applications, and advantages over proprietary alternatives. Through practical case studies, the chapter
demonstrates how GIMP and Blender empower professionals, educators, and hobbyists to create high-quality visual content without incurring significant financial costs.
What is Open-Source Software?
Open-source software is freely available for use, modification, and distribution. It fosters collaboration among developers and users, resulting in cost-effective, versatile, and frequently updated tools.

Greenhouses have become an essential part of modern agriculture as they offer controlled environments for plant growth, research, and horticultural practices. This chapter discusses the various applications of greenhouses, which include extending growing seasons, improving crop yields, supporting botanical research, and producing ornamental plants. Additionally, it emphasizes the importance of repair and maintenance in greenhouse operations. Understanding the repair and maintenance protocols is crucial to ensure the sustained functionality of heating systems, water management, and structural components.

In agriculture, sensors can monitor soil, water, vegetation, and environmental conditions. They assist farmers in enhancing crop quality, optimizing water usage, and making informed fertilizer choices.
CROP MONITORING
The primary function of remote sensing in agriculture is to assess crop health. Optical (VIR) sensing enables the observation of wavelengths beyond the visible spectrum, such as infrared; these wavelengths are highly responsive to crop vitality, damage, and stress. Recent advancements in this technology have enabled farmers to monitor their fields and execute prompt crop management decisions. Remote sensing for crop identification facilitates the detection of crops impacted by weather-related circumstances, pests, and other factors.
Pest Detection
Drones can administer insecticides and herbicides with greater precision, reducing chemical consumption and environmental repercussions. Drones can minimize chemical application by targeting specific regions impacted by pests or weeds, thereby safeguarding beneficial insects and mitigating the danger of pesticide resistance. Drones can also be utilized to deploy biological control agents, including beneficial insects or fungi, to address pest issues in an environmentally sustainable way.
Irrigation Management
A primary application of UAV technology in smart agriculture is crop irrigation management, which enhances water consumption efficiency by delivering the precise quantity of water at the most suitable location and time. UAVs equipped with suitable sensors can identify regions of a crop that necessitate supplementary irrigation. This positively impacts overall crop productivity. The

Drones have transformed agricultural operations, especially in crop monitoring, by providing farmers with an efficient and economical method to collect real-time data on their crops. Drones, outfitted with sophisticated sensors, cameras, and imaging technology, can obtain intricate aerial perspectives of extensive agricultural landscapes. This enables farmers to oversee crop health, identify early indicators of diseases, pests, and nutrient deficits, and evaluate water levels or irrigation requirements. Drones offer essential insights for precision agriculture, enabling farmers to make informed decisions that enhance output, minimize resource use, and improve overall crop management. Drones’ capacity to swiftly and precisely cover extensive regions has rendered them an essential instrument in contemporary agriculture.
UNDERSTANDING DRONE CROP MONITORING
Crop monitoring using drones is the deployment of drones fitted with specialized sensors and imaging systems to collect data regarding crops and their environment. The data undergoes processing and analysis, yielding outcomes that offer farmers practical insights to enhance crop output, decrease input costs, and mitigate environmental effect. The goal is to employ technology to enhance understanding of crop performance, so enabling more informed management decisions.
The procedure for drone crop monitoring generally encompasses the subsequent steps:

Proper selection of a fungicide and its application at the correct dose and the proper time are highly essential for the management of plant diseases. The basic requirement of an application method is that it delivers the fungicide to the site where the active compound will prevent the fungus damaging the plant. The fungicidal application varies according to the nature of the host part diseased and nature of survival and spread of the pathogen. The method which are commonly adopted in the application of the fungicides are discussed