eChapters

4.1. Physiological disorders in field crops

Identification of physiological disorders in agricultural crops

This chapter introduces plant analysis as a means of determining crop nutrient status and diagnosing nutritional deficiencies. It explains the selection of representative plant tissues at suitable stages of growth, followed by washing, drying, grinding, digestion and elemental estimation. Recommended tissues and sampling stages are provided for cereals, pulses, oilseeds, fibre crops, vegetables, ornamentals and fruit crops. Procedures are included for estimating nitrogen, phosphorus, potassium, sulphur, boron, zinc, iron, copper and manganese in plant samples. The chapter stresses that reliable interpretation depends on correct tissue selection, careful sampling and freedom from contamination. It thereby connects laboratory measurements with crop nutrition and fertilizer management.

4.1 Sampling and Preparation for Analysis

The determination of nutritional need of crops is an important aspect of nutrient management of any plant analysis programme. The need of fruit plants for mineral nutrients differ from those of annual crop species in a number of ways, many of which are related to the perennial nature of tree crops. In perennial tree crops, there is a need to supply nutrients both for ultimate fruit production, the fruits and the vegetative organs, which persist from year to year. The need for leaf analysis in perennial horticultural crops and forest trees has proved its superiority over soil diagnostic methods. This is essentially because of their deeper root system and the fact that nutrients supplied in one year may have its effect on both the nutrition and crop production in following years. However, it is largely being used not as an alternative method to soil testing, but as a supplement to soil testing. Results of foliar analysis are usually interpreted using the critical nutrient level (CNL) approach. Accurate interpretation of foliar analysis using the CNL approach is possible only when sampling is restricted to the same growth stage at which standard reference values have been established (Beaufils, 1971, 1973). The general purposes of plant analyses are:

Accumulation of nutrient elements in plant tissues indicates the accessibility of the concerned elements from the soil to the plant. Although different plant species and even different varieties of the same species may vary in their nutrient requirements, composition of a part or of the whole plant may well be adopted as a guideline to support the soil-test results for factual assessment of soil’s nutrient supplying power.

Different diagnostic tools are designed to avert nutrient deficiency or sufficiency and if properly used both loss of yield and quality of crop can be minimized. Among several diagnostic tools, nutrient analysis of standing crop seems to be an efficient method in arriving at the need-based fertilizer scheduling for various crops.

Nutrient uptake by plants indicates the actual accessibility of nutrients in soil to the plants. Also, concentration of certain heavy metals in plant indicates their solubility in soil which leads to poor crop quality.Although, different plant species and even different varieties of same species may differ in their nutrient requirements, the concentration of nutrient element in plant can act as guide to support the soil test result in assessing nutrient supplying capacity of a soil and as a tool for correcting any deficiency if carried out early enough to prevent yield loss. However, analysis of harvested or mature crop is like a post mortem as this information only can help in nutrient management planning in subsequent years.

Like soil testingplant analysis also suffers from some limitations. Amongthem, the most important are the risk of sampling error as well as the chances of incorrect interpretation of test report in recommending fertilizers. Selection of right plant part and right stage of crop growth are very crucial for successful plant analysis.

Introduction

Plant growth and productivity are adversely affected by various abiotic stresses. Plants are frequently exposed to a plethora of stress conditions such as low temperature, salt, drought, flooding, heat, and oxidative stress. Various anthropogenic activities have accentuated the existing stress factors. All these stress factors prevent them from reaching their full genetic potential and limit the crop productivity. In the event of growing concerns of uncertainties in climatic conditions, the abiotic stresses have become the major threat to agriculture production worldwide (Bray et al., 2000). The plant responses to abiotic stress condition are believed to be complex in nature as these are the reflections of integration of stress effects and responses at various levels of plant organization. To provide tolerance against stresses, plants are equipped with several inbuilt physiological and biochemical mechanisms occurring at cellular level. An understanding of processes linked to these mechanisms is vital in optimizing the crop growth and productivity under stress conditions.

Introduction
Plant breeding and genetics are at the forefront of agricultural innovation, playing a crucial role in enhancing crop traits to meet the ever-growing demands for food, fiber, and fuel. This chapter delves into the scientific principles, methods, and modern advancements in plant breeding and genetics, providing a comprehensive understanding of how these disciplines contribute to global food security and environmental sustainability. The chapter begins by exploring the fundamental principles of plant breeding, including heredity, genetic variation, selection, and hybridization. These concepts form the foundation for developing new plant varieties that exhibit desirable traits such as improved yield, disease resistance, and environmental adaptability. The importance of genetic variation is emphasized as a key driver of plant improvement, with discussions on the sources of genetic variation, the role of germplasm resources, and the impact of genetic diversity on plant adaptation. As the chapter progresses, various breeding techniques and strategies are examined, including mass selection, pedigree breeding, backcrossing, and markerassisted breeding. These methods are crucial for developing new plant varieties that can withstand the challenges posed by climate change, pests, and diseases. The chapter also addresses the role of genomics in plant breeding, highlighting the significance of genomic selection, gene editing, and bioinformatics in accelerating the breeding process and enhancing crop traits. The chapter further explores the controversial topic of genetically modified organisms (GMOs), discussing the principles of genetic engineering, the rise of genetically modified crops, and the associated controversies and concerns. The importance of GMOs in addressing global food security and environmental challenges is also discussed, providing a balanced perspective on their potential benefits and risks. The chapter concludes by emphasizing the critical role of plant breeding and genetics in ensuring food security and combating global warming. By developing climate-resilient crop varieties, improving water efficiency, and enhancing disease and pest resistance, plant breeding and genetics can contribute to sustainable agricultural practices that reduce greenhouse gas emissions and conserve natural resources

Methods for plant diseases control were first classified by Whetzel (1929) into exclusion, eradication, protection and immunization.

Two more principles - avoidance and therapy were created (NAS, 1968).

4.1. Physical methods

Employed for reduction or elimination of primary inoculums that may be present in seed, soil or planting material.

6.1. Fungicides

Fungicide originated from two latin words viz., fungus and caedo.

Word caedo means to kill.

Fungicide is a chemical agent which has the ability to reduce or prevent the damage caused to plants and their products.

Physical agents like ultra violet light and heat should also be considered as fungicides.

Antisporulant and fungistatic compounds do not kill the fungi, they are included under the broad term fungicide

5.1. Cultural methods

5.1.1. Eradication

Elimination of pathogen after it has become established in the area where host is growing.

2. 1. Plant domestication

Process of bringing wild species under human management.

2.1.1. Changes in plant species under domestication

Elimination or reduction in shattering of pods, spikes, etc.

Elimination of dormancy

Decrease in toxins of other undesirable substances. Eg. Bitter principle of cucurbits.

Cultivated plants show altered tillering, branching, leaf characters.

Decrease in plant height. Eg. Cereals and millets.

13.1. Germplasm

Also known as genetic resources or gene pool or genetic stock.

Sum total of hereditary material i.e. all the allele of various genes, present in a crop species and its wild relatives

Plant Growth Promoting Rhizobacteria (PGPR) are root-colonizing bacteria that form symbiotic relationships with many plants. The name comes from the Greek rhiza, meaning root. Though parasitic varieties of rhizobacteria exist, the term usually refers to bacteria that form a relationship beneficial for both parties (mutualism). They are an important group of microorganisms used in biofertilizer. Biofertilization accounts for about 65% of the nitrogen supply to crops worldwide. The term PGPRs was first used by W. Kloepper in the late 1970s and has become commonly used in scientific literatures. PGPRs have different relationships with different species of host plants. The two major classes of relationships are rhizospheric and endophytic. Rhizospheric relationships consist of the PGPRs that colonize the surface of the root, or superficial intercellular spaces of the host plant, often forming root nodules. Endophytic relationships involve the PGPRs residing and growing within the host plant in the apoplastic space.Some common examples of PGPR genera exhibiting plant growth promoting activity are: Pseudomonas, Azospirillum, Azotobacter, Bacillus, Burkholdaria, Enterobacter, Rhizobium, Erwinia, Mycobacterium, Mesorhizobium, Flavobacterium, etc.An ideal PGPR should possess high rhizosphere competence, enhance plant growth capabilities, have a broad spectrum of action, be safe for the environment, be compatible with other rhizobacteria, and be tolerant to heat, UV radiation, and oxidizing agent.

The essential plant nutrients, or essential elements, are listed in the Table 41. It enumerates 16 chemical elements of which the essentiality for plant growth and reproduction has been established according to the criteria formulated by D.I. Arnon and P.R. Stout, 1939. This listing has existed since 1954 with chlorine as the latest addition (cited by Hopkins 1999).

These plant nutrients are classified into various groups:

1.    Major elements and trace elements : Of the 16 listed, 9 are major elements or macronutrients and 7 are trace elements or micronutrients. Major elements are those which are needed by plants for their growth and reproduction in relatively large amounts while trace elements are needed in smaller amounts compared to the former. The major elements are further sub classified into structural elements (carbon, oxygen and hydrogen), primary macronutrients (nitrogen, phosphorus and potassium), and secondary macronutrients (calcium, sulfur, and magnesium). Micronutrients are Zn, Cu, Mn, Fe, Mo4 and boron (Table 41).

7.1. Introduction

Like all other living organisms such as humans, animals, and microorganisms, plants also need elemental nutrients for their growth and development. They assemble the nutrients from soil, water and air. However, to obtain economical crop yield, nutrients are also supplied to the crops from external sources such as chemical fertilizers and manures and using biofertilizers. It is the present-day need to handle the soil fertility status in a more realistic and careful way to obtain maximum crop harvest. Under poor management practices, soil may become infertile and loose its importance in agricultural use. In modern days, huge food demand for the burgeoning human population does not permit to show luxury to use only fertile soil. Moderately fertile soil or even degraded soil should also be managed properly so that they may be used to grow crops. For this, plant nutrients status of the soil plays a significant role along with other soil properties. For sustainable soil fertility management, parameters such as crop to be raised, its nutrient demand at various growth stages, current nutrient status of the soil, amount of nutrient application based on the soil testing results etc are important to be considered. Balanced nutrition to the plants is the prerequisite to obtain maximum benefit. If nutrients supplied to the plants are low in quantity than their requirement, crop production is lowered down. Similarly, if the nutrients are provided in more amount in the soil or unbalanced way through fertilizer or manure applications, total crop yield is suffered. It is a very common example that excess of phosphorus leads to zinc deficiency in most crop plants and it has been observed that excess N is responsible for potassium starvation in potato. Again, excess of iron, manganese, zinc, copper shows plant toxicity. Addition of nutrients to soils in excess also causes environmental pollution when the excess nutrients are lost from soil by leaching, surface run-off and volatilization. Unscientific way of soil fertilization leads to increasing cost of cultivation and imparts adverse effect to the environment instead of doing any good. Therefore, one should have a clear knowledge on soil fertility to obtain a sustainable productivity.

Involved in plant metabolic functions and the plant cannot complete its life cycle without the element.

7.1. Plant nutrient concentration and plant growth

1. Deficient

Lowest concentration of an essential element that limit yield severely and cause distinct deficiency symptoms.

Chemicals are commonly employed to manage plant diseases, pests, and weeds, but they are only effective if administered promptly once an infestation has been discovered. These chemicals must be sprayed, dusted, or misted over the ground and plants. Since the chemicals are expensive, it is important to have tools for applying them evenly and effectively. Crop Protection Products (CPP) like herbicides, pesticides, and fungicides work best when they are used at the right time during the crop’s most productive times. This problem is getting worse because there aren’t enough people to do the work. In this situation, the only choice that makes sense is to automate the application process. Most of the time, poisons are put on with dusters or sprayers. Dusting is the easier way to apply chemicals. It works best with movable equipment and usually only needs simple tools, but it is less effective than spraying because the dust doesn’t stick around as long. High volume spraying is usually efficient and reliable, but it is more expensive than low volume spraying, which fixes some of the problems with the first two methods while keeping the things that work well about them.

12.1. Sprayers

Atomizes spray fluid into a small droplets and eject it with little force for distributing it properly.

Regulates amount of pesticide to avoid excessive application that is wasteful or harmful.