eChapters

1. Introduction
Soils stand out as an intricate and diverse ecosystem on our planet. Their significance extends beyond supplying 98.8% of the world’s food, encompassing a wide array of essential services such as carbon storage, regulation of greenhouse gas emissions, flood prevention, and offering support to burgeoning urban populations. However, it is crucial to recognize that soil is a finite natural resource. The unprecedented growth of the human population, escalating from 250 million in the year 1000 to 6.1 billion in 2000, with projections reaching 9.8 billion by 2050, along with the intensified practices of agricultural production, is exerting immense pressure on the sustainability of soils.
For long-term sustenance the concept of ‘Soil quality’ was propagated around three decades back from now in the United States of America, and further expanded to the scientists of European and Asian countries. Soil health and soil quality are two interweaving term that signifies the potentiality or capacity of soil towards mankind. These two words complement each other in such a way that one term automatically comes with another to determine both aspects i.e. agricultural sustainability and environmental quality in terms of plant, animal and human health (Haberern, 1992; Doran, 2002). Idowu et al. (2007) remarked that the term “soil quality” is more favoured by scientists, whereas “soil health” is a term favoured by farmers as it connotes a holistic approach to soil management. The inception and application of soil quality term was officially approved by Soil Science Society of America (SSSA). They defined soil quality as “The capacity of a specific kind of soil to function within natural or managed ecosystem boundaries, to sustain biological productivity, maintain environmental quality, and promote plant and animal health” as illustrated by Karlen et al. (1997). It is a complex composition of certain properties associated with physical (texture, bulk density, water holding capacity, infiltration capacity etc.), chemical (pH, EC, organic carbon, extractable macronutrient and micronutrient etc.) and biological (microbial activity and related parameters) conditions of soil (Prabha et al., 2020). There are primarily two key methodologies for assessing soil quality: the descriptive approach, which focuses on characterizing various aspects or attributes of soil quality, and the Indicative approach, which aims to identify the ability or capacity of an attribute in a desired manner. The comprehensive process of developing a soil quality index is guided by the 3-Is framework: the Identification of indicators, Interpretation, and Integration of selected soil quality indicators. It is important to note that the specific set of indicators utilized can vary between different soils, diverse agroecosystems, and from one crop to another. Additionally, climatic conditions and other abiotic factors may also significantly influence the assessment of soil quality.
The USDA has categorized soil quality indicators into four primary groups: visual, physical, chemical, and biological indicators. However, in the current context, the dominant indicators are physical, chemical, and biological. For a systematic assessment of soil quality, it is crucial to collect individual parameters and integrate them meaningfully. Consequently, integrated soil quality indicators

1.1. FYM compost

Decomposed mixture of dung and urine of farm animals along with litter and left over materials from roughages or fodder fed to the cattle.

Farmyard manure contains 0.5% N, 0.2% P₂O₅ and 0.5% K₂O.

Urine contains one per cent nitrogen and 1.35% potassium.

10 to 20 t/ha is applied, but more than 20 t/ha is applied to fodder grasses and vegetables like potato, tomato, sweet potato, carrot, radish, onion etc., respond well to the farmyard manure.

Crops like sugarcane, rice, oranges, banana, mango and coconut respond good to FYM.

According to Planning Commission Report (2014), India generates about 62 million tons of municipal solid wastes (MSW) every year from urban cities. There has been a significant increase in municipal solid waste generation in India in the last few decades. This is largely due to rapid population growth and economic development in the country (Annepu, 2012). Solid waste management (SWM) has become a major environmental issue because of serious environmental implications like global warming (through green house gases emission) and contamination of toxic pollutants (like heavy metals) in surface and groundwater bodies. Solid waste management is one of the essential services to be provided by municipal authorities in the country to keep urban areas clean. Out of total waste generated in India, only 12.45% waste is scientifically processed and rest is disposed in open dumps (CPCB Report, 2013). Although, incineration of solid wastes is being followed in many places for energy production, composting is considered most environment friendly method of SWM as it promotes recycling of nutrients in crop production.

Introduction

Engineered nanoparticles are a group of products that are defined by their size, ranging from 1 to 100 nm. Due to the smaller size, the physio-chemical properties of nano particles become very different from those of the same material in a larger form. Total production of nano-materials is expected to increase considerably in the near future. Nanotoxicology is yet another emerging field of science dealing with the effects of nano-devices and engineered nano-particles on living organisms. It has been observed that the materials in nano-dimensions react totally different in comparison to their existence in micro or macro sizes.

The Late Dr. APJ Abdul Kalam is described as a great patriot, visionary leader and the 11th President of India ( 2002 – 2007 ). The country would have celebrated his 84th birth day on 15th October 2015. To many like me, he was the most ideal role model that the youth of India needed, in recent time. He emerged as a complete human-being who touched the lives of people.

My first meeting with him was when he visited IPCL in eighties - as the DRDO Chief to discuss about Carbon Fiber and Composites. I was heading GSFC’s R&D Centre and other facilities like engineering plastic Nylon – 6 and their Composites and hence was invited to join the discussions. That interaction left a strong impression in my mind. Later when I became Vice Chancellor of Gujarat Agricultural University, I had many more opportunities to meet him and was often surprised at his deep rooted interest and knowledge in every sphere of Science & Technology. Subsequently, to my delight, I received an invitation from his office on the eve of 26th January evening - at home with the President and later was given more time for a one-to-one meeting the next day. Walking across the corridors of the Rashtrapathi Bhavan, the atmosphere looked rather formal and uneasy for me, but, as I was ushered into his room, I saw Dr. Kalam wearing his favourite blue shirt and smiling. He moved forward and greeted me with the same friendliness and warmth. As we started talking about Agriculture scenario, the work I was planning and the future prospects, I marveled at his understanding and insight and left the room truly inspired. 

"Where is your Dhoti, Dr. Mehta ?” Dr. Varghese Kurien surprised me as I entered his office at IRMA (Institute of Rural Management Anand). That was April 2000, soon after I had taken over as the Vice Chancellor of the erstwhile Gujarat Agricultural University (GAU) and had decided to call on him during my visit to the Anand Campus. (At that time GAU was the largest University in the Asia with four main campuses – Dantiwada, Anand, Junagadh and Navsari and about 65 experimental farms / stations spreaded all over).

Remote sensing

It is the art and science of obtaining information about an object, area, or phenomenon through the analysis of data acquired by a device without being in physical contact. Remote sensing technology involves acquiring information about the earth’s surface and atmosphere, using satellite based sensor, interpretation, of spectral measurements and characterization of land resources and environmental phenomena.

The information recorded by this technology is not visible to humankind. It provides synoptic view as well as three-dimensional view of larger area. And data are received periodically and helps in monitoring the changes at short intervals. The data recording is unbiased one which is stored permanently and can be used in many applications. Thus, processing of data is faster than the conventional interpretation method. Thus, soil resources data collected by extensive ground surveys and soil maps were prepared using cartographic techniques these were tedious, costly and time consuming. Multi date, multi spectral and real time satellite data provide a reliable accurate tool for assessment and repeat coverage of the same area at the same local time for monitoring soil resources (Joshi, 2013). In remote sensing, reflected energy from the object is recorded by a sensor. The information about the object is obtained through the analysis of reflected rays. Three energy interactions occurs when electromagnetic energy falls on any surface feature i.e., reflection, absorption and transmission.

Technical Term                                 Definition

Geographical Information System

Base Map                                          Basic representation of a region of the earth as it would appear if viewed from above. That is a map containing geographic

                                                          features that is used for reference. Roads, for example, are commonly found on base maps

Sustainable management of soil resources is essential for food, nutritional and economic security of the country. The continued degradation of soil resources is considered an important factor in lowering the total and partial factor productivity of agriculture in the country. The process like soil erosion, nutrient loss, water logging, desertification, acidification, compaction, crusting, salinization and soil contamination affect food and environmental security in most parts of the country. The future agricultural growth at higher rate cannot be sustained with a deteriorating soil resource base. We need to monitor the quality of soil resources and devise appropriate management strategies for sustainable crop production without deteriorating the environment.

In India, several agencies like National Commission on Agriculture (NCA), Ministry of Agriculture (Soil and Water conservation Division), Society for Promotion of Waste lands Development (SPWD), NBSS&LUP, Nagpur have been constantly inventorizing and characterizing soil resource for drawing up land use and development plans at National and State levels. However, there is a great variance in estimates due to differences in approaches and criteria for assessment. For an example,the total degraded land as estimated by NCA is 148.09 Mha as against, 175.0 Mha by Ministry of Agriculture (Soil and water conservation Division), 129.58 Mha by SPWD and 187.7 Mha by NBSS&LUP, Nagpur.

In soil profile development, we focused on vertical variability in soils - the differences among soil horizons. In this chapter we focused on horizontal variability- how soils differ from place to place across the landscape. Spatial variations in soil properties occurs across distances having geographic meaning for land management-from a few meters to many kilometers. We need to monitor regularly the status of our soil resources employing modern technologies to refine our understanding about them and renew our commitment to their preservation. The applications of Remote Sensing (RS), Geographical Information Systems (GIS) and Global Positioning System (GPS) have greater opportunities to offer in this regard.

AIRBORNE SENSING: Remote sensing from an airplane. (Related words: airphoto, aerial)

Soil air, its composition, gaseous exchange

Soil air is a continuation of the atmospheric air. It is in constant motion from the soil pores into the atmosphere and from the atmosphere into the pore space. The circulation of air in the soil and renewal of component gases like oxygen and carbon dioxide is known as soil aeration. Soil aeration is essential for the respiration and survival of soil organisms and plant roots.

Composition of soil air

Soil air contains gases like nitrogen, oxygen, carbon dioxide, water vapour and others. The composition of soil air is different from atmospheric air. Soil air contains more carbon dioxide and less oxygen than atmospheric air. It also contains more water vapour than atmospheric air. The nitrogen content of soil air is almost equal to atmospheric air. (Table below)

Reproductive development determines flowering, pollination, fruit set, fruit growth, maturation, and ultimately horticultural productivity. This chapter introduces the physiological processes controlling flowering and reproductive development and explains the influence of environmental factors and plant hormones. Major plant growth regulators such as auxins, gibberellins, cytokinins, ethylene, and abscisic acid are considered in relation to horticultural applications. PGRs can influence rooting, flowering, fruit set, fruit size, thinning, ripening, dormancy, and senescence when used appropriately. The chapter emphasizes crop-specific concentration, timing, method of application, and environmental conditions, highlighting the importance of responsible PGR use for improving yield, quality, and marketability.

A reservoir stores water behind a dam and can reduce downstream flooding by temporarily retaining part of the incoming flood volume. Its effectiveness depends on available storage, inflow characteristics, outlet capacity, operating rules, forecasting information, and the timing of releases. Reservoirs may also serve irrigation, municipal supply, hydropower, navigation, recreation, and environmental purposes, making their planning a multipurpose undertaking. This chapter introduces reservoir terminology, classifications, storage zones, capacity determination, site selection, sedimentation, and operating principles. It explains how flood-storage space modifies peak discharge and discusses reservoir routing, release regulation, design limitations, safety considerations, and the role of coordinated reservoir systems in basin-wide flood management.

Done for both biotic and abiotic stresses.

Biotic stresses are disease and insect pests.

Abiotic stresses are drought, salt, flood, heat, cold, etc.

In the earlier chapter the major soil vulnerability namely, water and wind erosion, depletion of soil organic matter, loss of plant nutrients, salinity, alkalinity, acidity, pollution and contamination, compaction, sealing, crusting, water-logging, aridity, landslide and abandoned mines were described. In this chapter two more parts, Importance of remote sensing (RS) and geographical information system (GIS) in soils and Watershed management are also included after seeing their importance in agriculture and soils. Restoration means that by various actions or processes to return something to its original owner, site, place, or condition. In this context our aim is to restore our mother soil from various vulnerabilities by different actions and processes to its natural and original condition up to the maximum possible extent. Management is defined as the scientific methods to attain targeted production through planning, organising, training and fixing targets for employees. Therefore, after the restoration, soils should be managed according to scientific method of action by scientifically selected and trained staff to perform the assigned responsibilities, effectively, efficiently and rapidly within stipulated period. On these guidelines restoration and management of vulnerabled soils is described here,

Under natural conditions, the largest source of labile carbon (C) inputs to the soil is root exudates (Bertin et al., 2003; Hutsch et al., 2002; Kuzyakov 2002). Roots exude a variety of low-molecular weight organic compounds, including sugars, amino acids, organic acids (Bertin et al., 2003), but also contain hormones, vitamins, amino compounds, phenolics and sugar phosphate esters (Uren, 2001). These compounds are rapidly metabolized; for example, Hutsch et al., (2002) found that 64–86% of maize root exudates were respired by soil microorganisms. The effect of root exudates depends on the distance that they can diffuse away from rhizoplane (Gupta and Mukerji, 2002).

Rhizosphere

The term Rhizosphere was introduced by the German scientist, Hiltner in 1904. It is region of the soil, which is subjected to the influence of plant roots. It is the unique environment under the influence of plant roots. The roots of plants are not only involved in the uptake of mineral nutrients and water for plant growth, but they also release a wide range of organic compounds in the surrounding soil.

Introduction

The rhizosphere plays a pivotal role in the boundary where biological and chemical activities profoundly impact various landscape and global-scale processes. Understanding these processes is crucial for maintaining planetary health and sustaining the organisms inhabiting it (Morrissey et al., 2004). To enhance the yield potential of staple food crops, leveraging the root systems of plants becomes essential to meet the anticipated doubling of global food demand in the future (Gewvin, 2010; Zhang et al., 2010). Amidst the challenges posed by global climate change and the burgeoning global population, there’s an increasing need for greater productivity from cultivated food, animal feed, and fibers on less favorable and often infertile lands—conditions already prevalent in many developing nations (Tilman et al., 2002). Advancing our understanding and control of rhizosphere processes stands as a critical frontier in research for the next decade.

9.1. Risk

Situation in which one knows both possible future and probability outcomes.

Introduction 
In healthcare settings, risk management is not a novel idea. There is a wealth of research on risk control in the supply of medications, in-vitro diagnostics production, pharmaceutical manufacture, health information protection, & healthcare process management. Risk management is an important part of patient safety programs in developed countries. An important aspect of quality improvement in laboratories is risk management, which requires an evaluation of every testing method. All the working laboratories must perform this repeated preventive means at least once a year. The safety of laboratory workers, the caliber of results, and environmental preservation all depend on risk management in good laboratory practices (GLP). These are a few GLP risk management techniques. GLP- The Concept In accordance with excellent laboratory practice, risk management should be implemented by evaluating every laboratory procedure to guarantee the safety of both patients and staff. When a GLP facility implements a risk-based inspection procedure, risk assessments will be documented. QA inspection programs will frequently cover widespread operations, but the frequency & extent of the inspection may not take into account or represent the risk associated with each action. By putting quality control procedures into practice, one can learn about the shortcomings of a particular activity and use this information to focus the quality assurance program. According to the OECD Principles of GLP, or “the principles,” there are three different kinds of quality assurance inspections: process-, study-, and facilitybased. Risk Management The process usually begins with the creation of management committee for risk, which consists of important Laboratory staff members and a few ad hoc people chosen by the primary members. All technical laboratory procedures (pre-, examination-, & post-examination) will undergo a process flow analysis