eChapters

ESSENTIAL ELEMENTS FOR PLANT GROWTH

Arnon (1954) set three criteria to state an element is essential to plants. They are:

1. The plant must be unable to grow normally or complete its life cycle in the absence of the element,
2. The element is specific and cannot be replaced by another and,
3. The element plays a direct role in metabolism.

Accordingly there are 16 elements essential for plant growth. They are carbon, hydrogen and oxygen called primary nutrients, calcium, magnesium and sulphur called secondary nutrients; iron, zinc, manganese, copper, boron, chlorine and molybdenum are known as micronutrients.

Introduction

In India, hot arid ecosystem covering an area of 31.7 million ha lies at north western part of the country and 62% of this area falls in western Rajasthan covering 12 districts i.e. Jodhpur, Jaisalmer, Jhunjhunu, Sikar, Hanumangarh, Sri Ganganagar, Bikaner, Barmer, Pali and Sirohi. The major landforms in arid western Rajasthan are dune and inter-dune plains having sandy to sandy-loam textured soils. Temperature remains high for most part of the year reaching up to 42-45°C during prolonged summer months (April to July), whereas annual rainfall is very low and highly sporadic (100-400 mm) mainly occurs during August and September. Annual potential evapotranspiration ranges from 1500-2000 mm. Loss of fertile top soil from denuded soil surface through wind erosion is frequent during summer months. The region is subjected to frequent occurrence of droughts, once in every three years, which further intensifies the process of desertification (Samra et al. 2006). Shorter growing period, sandy soils, very low available water capacity, inadequate nitrogen and phosphorus availability are the major constraints. Soils are prone to severe wind erosion, terrain deformation and nutrient depletion. The region is mostly mono cropped and double cropping is being practiced extensively in canal and tubes well command area. Extensive fallowing in the past even in very good rainfall years because of uneven undulating topography and severe windstorm are the cause of concern. Ground water is deep and is usually brackish, declining at alarming rate due to excessive withdrawal for irrigation and other purposes. The region, however, sustains on perennial vegetation of Prosopis cineraria, Tecomella undulata, arid shrubs and grasses, which are rich resources of fodder for animal because cropping is affected by vagaries of monsoon. During last two to three decades, a 2 to 3-fold increase in irrigated areas with cultivation of both kharif and rabi crops has been recorded and most of these increments are resulted through conversions from rainfed areas, grazing lands and sand dunes into irrigated areas.

14.1. Soil fertility

Ability of the soil to supply essential plant nutrients during growth period of the plants

Crop producing capacity of the soil

Introduction

Ideal plant health and productivity of a cropping system depends on an adequate amount of plant nutrients. Fertility of the soil refers to its capacity to support the production of crops. A productive fertile soil can support optimal plant growth, seed germination to plant maturity by providing adequate soil volume for plant root development, essential plant nutrients to meet the nutritional requirements of the plants, and encourage for the consequent plant structure. These attributes of the soil can be distinguished as inherent or dynamic soil quality indicators.Optimum plant health and productivity of a cropping system depends on an adequate supply of plant nutrients. The quantity of nutrients required by plants varies depending on many interacting factors including:

• Agronomic effects

• Soil properties

• Climatic condition

• Management practices

ACID-FORMING FERTILIZER: A term applied to commercial fertilizers which leave an acid residue in the soil. The amount of calcium carbonate required to neutralize the acid residue is referred to its equivalent acidity.

Soil fertility is defined as the quality that enables the soil to provide proper nutrient compounds in proper amounts and in proper balance for the growth of specified plants. Soil fertility is also defined as the ability of soil to supply adequately the nutrients normally taken from the soil by plants.

Soil fertility is the resultant of several factors, not the least important of which is the soil itself. Theoretically, the soil only plays the part of a support and could be very easily dispensed with and replaced by sand and even that can be replaced by a wire framework to support the plant mechanically and it will grow quite well if the right amount of nutrient materials have been added to water. ‘Where does the soil come in?” you will ask. The importance of the soil is two-fold: (1) It provides vast reserves of plant food which is slowly made available. (2) It provides limiting factors which restrict plant growth; these limiting factors must be neutralized. We have already discussed these reserve food materials and limiting factors in Chapter II.

It has been shown that if we treat a soil with dilute acid exhaustively we can remove everything from it except the mineral framework. If we try to grow anything in this mineral framework nothing will grow. Yet it is not like sand, for whereas in sand by adding appropriate amounts of nutrient materials in water solution you could grow a crop, nothing will grow if you added the same solution of nutrient materials to the soil. This mineral framework, therefore, is not inert like sand, but it is active and can react with the nutrient salts in such a way that either they are rendered unavailable or something else which is toxic is produced by the interaction between the soil and the nutrient salts. This mineral framework is not acted upon by dilute acids, but it reacts with alkalies in such a way that the alkalies are neutralized. In this respect, therefore, the mineral frame work behaves like an acid. With alkalies it forms salts and different alkalies are required in equivalent amounts for the formation of these salts. Thus we can have salts of a number of bases and if we use sodium hydroxide for neutralizing we shall have sodium soil, similarly we can have a calcium, magnesium or potassium soil. Now in nature, all the various bases principally, calcium, magnesium, sodium, and potassium, are associated with it in different proportions. The nature and amount of these bases determines the physico-chemical properties of the soil affecting crop yield and leading to soil infertility. We have already indicated the method of bringing the soiil to the normal state when it suffers from any of the defects associated with the soil framework.

1. White alkali soils also know as

a. Acid soil                  b. Saline soil

c. Saline sodic soil    d. Sodic soil

Introduction

Pedology:- Pedology word drive from Greek word pedon, means soil or earth and logos means to study. Pedology is concerned with origin of the soil, its classification, distribution and character (Physical, Chemical and Biological).

Definition:- Soils are natural bodies made from both mineral and organic materials and capable of supporting plants out-of-doors.

Composition of soil on volume basis (Soil components)

i. Mineral matter :- 45%

ii. Organic matter :- 5%

iii. Soil water :- 25%

iv. Soil air :- 25%

Soil formation is a long term process. It takes several million years to form a thin layer of soil. The soil is made up of broken down rock material of varying degree of fineness and changed in varying degrees from the parent rocks by the action of different agencies such that the growth of vegetation is made possible. As soil is a complex mixture of various components, its formation is also more complex. The Formation of a particular type of soil depends upon the physico-chemical properties of the parent rock, intensity and duration of weathering, climatic and other parameters.

Soil formation takes place in two consecutive stages:

1. The weathering of rocks into regolith

2. The formation of true soil from regolith

The evolution of true soil from regolith takes place by the combined action of soil forming factors and processes. The first step is accomplished by weathering (disintegration and decomposition) and the second is associated with the action of soil forming factors which are known as pedogenic factors.

The pedogenic processes are dynamic and extremely complex involving several chemical and biological reactions, usually operating simultaneously in a given area. One process may counteract another, or two different processes may work in tandem to achieve the same result. Different processes or combination of processes operate under varying natural environments. The combined interaction of various soil forming factors under different environmental conditions set a furtherance to certain recognized soil forming processes. Pedogenic processes include:

Rock

A rock may be defined as “an aggregate of one or more minerals”. An aggregate of single mineral calcite gives rise to crystalline limestone. Granite is a combination of several minerals. Most rocks are hard and compact as granite and basalt, but some are loose and feebly aggregated as sandstone. Rocks possess certain characteristics such as structure, colour, specific gravity, cleavage and mineralogical make-up by which we can identify the rocks and also distinguish one from the other.

2.1. Minerals

Primarily, minerals are usually inorganic substances possessing a definite chemical composition and a definite molecular arrangement which is usually expressed in geometric form. The mineral matter is made up of various elements, combined to form compounds. Usually, minerals consist of more than one constituent elements. Quartz contains two elements, silicon and oxygen. Other minerals may contain many elements, such as amphibole consists of several elements that include sodium, calcium, magnesium, iron, aluminium, silicon, and oxygen. Some elements exist as such without forming compounds. They contain exceptionally one element. Graphite (C), diamond (C), and Sulphur (S). Minerals are naturally occurring crystalline solid where the atoms are arranged in a regular three-dimensional array. A crystal is a solid, formed by a repeating three-dimensional pattern of atoms, ions, or molecules & possessing fixed distances between the different parts. Minerals that do not grow in these regular or crystalline patterns are called amorphous solids. When we talk about ‘naturally occurring’, we exclude the laboratory-synthesized crystalline solids. Glass and amber are also naturally occurring solid, but they are not crystalline and thus, they are not considered as minerals, rather they are referred as amorphous solids.

Soil genesis, or pedogenesis, is the combined effect of physical, chemical, biological and anthropogenic processes working on soil parent material (rocks & minerals). Soil is said to be formed when organic matter has accumulated and colloids are washed downward, leaving deposits of clay, humus, iron oxide, carbonate, and gypsum, producing a distinct layers. These constituents are moved from one level to another by water and animal activity.

Introduction

Agriculture is the mainstay of the Indian population and contributes about 30 per cent to the gross domestic product of India. The government has laid great emphasis onimproving productivity, quality of produce and welfare of farmers through awareness campaign and enhanced agri-knowledge for the farming community to double the farmer’s income by 2022 and make the farmers realise their significant contribution to the nation building. Doubling the farmer’s income can only be possible, with proper diversification of crops, developing the existing irrigation system in proper utilization of available water on plant requirement basis, conservation of soil fertility through adding organic manures to the field, best utilization of human excreta from the storage tanks of individual toilets after proper decomposition through bacterial degradation, fulfilling the nutrient requirement of crops on the basis of soil test values, proper financial support from the Government to the farmers in managing stress due to natural calamities etc. The governmentbelieves that farmers’ welfare will improve if there is increase in net income from the farms. With this end in view, the approach is to reduce cost of cultivation, enable higher yield per unit area and realize remunerative prices of farm produce. To achieve this goal, action on three pillars needs to be taken.

Soil is a dynamic, vital living natural resource. Soil health is the condition of the soil and its potential to sustain biological functions, maintain environmental quality, and promote plant and animal health. It is qualitative trait of soil. Healthy soil is the foundation for profitable, productive, and environment friendly agricultural systems.

SOIL WATER

Soil water and oxygen share the pore space in soil and generally the oxygen content is determined by the water content, which is added by irrigation or rains and then keeps on changing due to evapotranspiration. Water is the vehicle by which most nutrients move from the soil to root surface. But for the lowland rice, nutrients are most available to plants at ?eld capacity moisture (about 0.3 atmosphere soil water tension) and the availability decreases as the moisture content decreases to wilting point (about 15 atmosphere tension). That is why rainwater or irrigation increases nutrient availability, while extremely dry condition decreases it. There is thus a signi?cant interaction between water and nutrient availability in soil (Singh et al., 2014). In a study in India (Singh et al., 1980) the yield of wheat was signi?cantly affected by irrigation water and nitrogen treatments; maximum yield was obtained with irrigation at 50% available soil water in 60 cm soil depth and 120 kg ha ^–1 nitrogen addition. A study on wheat at Delhi (Kumar et al., 2015) very well shows the effect of irrigation water on yield and uptake of nutrients (NPK) (Table 5.1).

Genesis of Soil

World’s geography is very widely diversified in relief showing various features like mountains and hills covered with snow and trees, glaciers, higher altitudes to plain to lowest valleys, forests to barren lands, fertile fields to waste lands, plateaus, deltas, swamps, lowlands, deserts etc. Temperature varies from arctic cold to scorching hot of equator, Rainfall from aridity to per humidity. All these situations and conditions under different sets of combinations generate and develop numerous types of soil from a single type of parent material. Therefore, many types of soils may develop at a smaller area.

Physical, chemical and biological weathering processes disintegrate and decompose various rocks and minerals to make asymmetrical soil parent material. This parent material is converted in to the soil profile by soil forming processes in the presence of soil forming factors. Soil genesis is defined as mode of formation of the soil from the parent material due to the action of soil forming factors and processes. Parent material, Factors of soil formation and Processes of soil formation, are three main part of soil genesis. These are described here:

1. Parent Material,

2. Classification of parent material,

3. Factors of soil formation,

4. Processes of soil formation,

5. Types of soil forming processes.

1. Introduction
As climate change advances, risk of managing soil and atmosphere with regard to emission and pollution is going out of hand. Many researches and reports say that currently the global warming is 1.1°C more than the pre-industrial levels, which is not far behind the target of 1.5°C which was agreed by nations under the Paris agreement in 2015 (Janki M, 2023). Achieving that will likely involve removing carbon dioxide from the atmosphere, according to the Intergovernmental Panel on Climate Change. But strategies like capturing and storing the carbon emissions from biofuel-burning power plants, or planting new forests to absorb carbon, can create their own problems. Recently UN security general said we are shifting to the “Era of global boiling” from global warming. Globally countries are witnessing unbearable heat waves, forest fires, irregular rainfall, flashfloods, coral bleaching and unpredictable weather patterns which often resulting in devastating effects on the coastal and hilly regions of the country. Around nine tipping points have been identified so far globally. Climate tipping points are threshold that when crossed leads to irreversible changes in the climate system and will have a severe impact on the living organisms on the earth. All these variations in climate are driving by increasing greenhouse gas (GHG) emissions and global warming. We cannot change the state of atmosphere to as existed thousands or millions of years ago. Only option left with us is to reduce emissions and prevention of further global warming and climate change. As we are already existing in some level of changed climate, responding to climate change involves a two-pronged approach, reducing emissions of and stabilizing the levels of heat-trapping greenhouse gases in the atmosphere through mitigation and secondly, adapting to the climate change. Because climate change is irreversible process.

Soil mechanics as a distinct branch of soil science is comparatively of recent growth. Its need arose from the fact that the requirements of the engineer are very often quite different from those of the agriculturist. Whereas the former would as a rule require hard, compact, impervious soil, the latter would have no use for it for the growth of his plants which require soft, friable and porous soil. The agriculturist generally has to look up to nature to help him out of his difficulties, the engineer has to depend on his scientific skill to modify the soil to suit his requirements. In this chapter an attempt will be made to explain in a simple language the requirements of the building, road, and irrigation engineer for particular types of soils and how they are met by modifying the soil if the required properties already do not exist.