eChapters

In dry combustion technique, the combustion of soil sample (about 250 mg and mm sieved) is carried out at high temperature (about 1000 ºC) through feeding in an inert boat in the electric furnace. The CO₂ produced from the oxidation of carbon present in the soil sample at high temperature is carried towards non dispersive infrared detector (NDIR) by a carrier gas where it is quantified and total carbon content is determined.

The role of toxicology in the evaluation of new agrochemicals

The widespread use of agrochemicals for crop protection may expose humans, animals, and the environment to toxic chemicals. Humans may be exposed during manufacture or application, and to a lesser extent as consumers of food products containing trace amounts of residues.

Strategies of toxicity testing

No-Observable-Adverse- Effect-Level (NOAEL)

A level in which the total diet that causes no adverse effect in treated animals when compared to untreated animals maintained under identical conditions. This NOAEL is expressed on a mg/kg of body weight/day basis. Chronic and sub chronic studies are need to be carried out in different species to determine NOAEL values.

It depends on how much of the substance an organism is exposed to, but all chemicals are toxic to some degree. Toxicology studies try to figure out the exact types and amounts of harmful effects, as well as the lowest doses that won’t have any negative effects (called the “No Observed Adverse Effect Level” or NOAEL). Most data come from studies with lab animals and cells that have been grown in a lab. Using these numbers and extrapolation or uncertainty factors, it is possible to figure out an Acceptable Daily Intake (ADI). This is the maximum amount of a substance that a person can take in every day without putting themselves at a very high risk of getting sick. These numbers will be compared to how people might be exposed to a compound in the environment, including through food. This will show if the use of an agrochemical is potentially allowed.

Practically every aspect of the chemistry of heavy metals in soil is related to the formation of complexes with organic matter. While monovalent cations (Na+, K+, etc.) are held mainly by simple cation exchange through the formation of salts with COOH groups (RCOONa, RCOOK), multivalent cations (Cu²+, Zn²+, Mn²+, etc.) form coordinate linkages with organic molecules.

A schematic diagram showing organic matter reactions involving metal ions in soils is given in Fig. 9.1. The metals present in the solution phase as charged species and as soluble metal-organic complexes (MChe), are shown to be influenced by the activities of higher plants and microbes, both of which serve as sources of water-soluble ligands for complex formation; some metals are held in insoluble organic complexes and are non-leachable and relatively unavailable to plants.

4.1. Tractor

Self propelled power unit having wheels or tracks for operating agricultural implements and machines including trailers.

Tractor engine is used as a prime mover for active tools and stationary farm machinery through power-take off (pto) or belt pulley.

Introduction 
Good Laboratory Practices (GLP) serve as the foundation of any efficient and high-functioning laboratory, ensuring data reliability, patient safety and adherence to regulatory standards. In an environment where accuracy, consistency and data integrity are critical, comprehensive GLP training becomes the driving force behind operational excellence. A well-structured training program strengthens the capabilities of laboratory professionals, enabling them to navigate complex regulatory landscapes while upholding the highest standards of quality and safety. In today’s rapidly evolving scientific and industrial sectors, maintaining stringent laboratory standards is imperative rather than optional. GLP provides a structured approach that ensures every test, analysis and experimental procedure is carried out with precision, ethical rigor and strict adherence to safety measures. However, beyond simply following GLP principles, continuous assessment of laboratory personnel’s competency is essential to sustaining long-term proficiency and compliance. Competency assessment in GLP plays a crucial role in verifying whether laboratory staff possess the requisite expertise to perform tests accurately and generate reliable, scientifically valid results. As a framework designed to uphold the credibility of non-clinical laboratory studies, GLP is instrumental in reinforcing research integrity and ensuring compliance with regulatory authorities. Laboratories that rigorously follow GLP guidelines contribute to reproducible and verifiable scientific findings, which are vital for regulatory approvals and critical decision-making in pharmaceuticals, healthcare and research sectors. Competency assessments function as both a quality assurance mechanism and a professional development tool, guaranteeing that laboratory personnel not only comprehend standard protocols but can also execute them effectively in real-world scenarios. With the continuous evolution of laboratory sciences, training and assessment methodologies must also advance to meet new challenges. This chapter explores the transformation of GLP training and competency evaluation, emphasizing their significance, diverse methodologies and essential components. Additionally, it highlights best practices for implementation and introduces innovative strategies designed to complement established global standards, such as those outlined by the Clinical and Laboratory Standards Institute (CLSI) and the Indian Council of Medical Research (ICMR). By embracing these advancements, laboratories can not only achieve regulatory compliance but also cultivate a culture of excellence, ensuring that their workforce remains agile, skilled and prepared to meet the demands of modern scientific landscapes.

Training represents a systematic process of developing knowledge, skills, abilities, and competencies that enable individuals to perform their current and future roles more effectively. It involves planned learning experiences designed to bring about relatively permanent changes in behavior, performance, and capabilities through the acquisition of new information, skills, and attitudes. The essence of training lies in its purposeful nature, distinguishing it from informal learning or casual instruction by its structured approach to achieving specific learning objectives within defined timeframes and contexts. The contemporary definition of training has evolved from narrow skill-based instruction to encompass broader developmental approaches that address cognitive, emotional, and behavioral dimensions of human performance. Modern training is understood as a strategic organizational investment that enhances individual capability while supporting broader business objectives such as productivity improvement, quality enhancement, innovation promotion, and competitive advantage development. This expanded conceptualization recognizes training as both a human resource development tool and a strategic business process that contributes directly to

Nitrogen ranks fourth element in cell composition after C, H and O. It forms main components of amino acids, the building blocks of peptides and proteins. Besides, it is present in the genetic material of cell as well as in the chlorophyll and cell wall in the form of chitin and mucopeptides. Plant growth in soil is often limited by less supply of nitrogen, therefore a major nutrient limiting factor in crop production. About 26 x 10⁶ Mg N is globally applied to soil each year to enhance crop productivity.

Phosphorus, an essential element, plays a central role in cell metabolism and reproduction. It is a structural component of energy transferring molecules (ATP, ADP and AMP), nucleic acids, coenzymes, phosphoproteins, phospholipids and sugar phosphates. In soils, the phosphorus does not occur as abundantly as nitrogen or potassium. The total phosphorus in an average arable soil is estimated to be about 0.05% (by weight) with an average of approximately 1100 kg P ha-1 (range 200-2000 kg P ha^-1). But only a meager proportion (only ~0.1-1.0%) of it is available for use by plants and microorganisms because phosphorus has poor solubility and gets fixed in soil. Not only the native inorganic phosphates but even the added soluble phosphates of fertilizers and manure readily combine with the cations present in soil solution to form low solubility products. Fixation reactions in soils allow only a small fraction (10-15%) of phosphorus fertilizer to be taken up by the plants in the year of its application.

3.1. GM or transgenic crop

Plant that has a novel combination of genetic material obtained through the use of modern biotechnology.

GM crop contains a gene(s) that has been artificially inserted instead of plant acquiring through pollination.

In 1994, Calgene’s delayed ripening tomato (Flavr-Savr) is first GM food crop.

Transmission electron microscope (TEM)

The transmission electron microscope (TEM) operates on the same basic principles as the light microscope but uses electrons instead of light. What you can see with a light microscope is limited by the wavelength of light. TEMs use electrons as “light source” and their much lower wavelength makes it possible to get a resolution a thousand times better than with a light microscope.

We can see objects to the order of a few angstrom (10^-10 m). For example, we can study small details in the cell or different materials down to near atomic levels. The possibility for high magnifications has made the TEM a valuable tool in both medical, biological and materials research.

13.1 Introduction and Physical Principles

A microscope is a tool that enables the user to see objects at a magnification greater than the actual specimen. Resolution and magnifying power are the two integral aspects of microscopy. Resolution is a measure of capability of an image forming system to separate images of adjacent objects. The resolving power (8) is numerically defined as d = 0.61l/n sin a, where,  l is the wavelength of the light, n is the index of refraction of the medium between the specimen and lens, a is half the angle of the cone of light from the specimen plane accepted by the front surface of lens and n sin a is the numerical aperture (NA). The NA represents the light gathering power of the lens aperture or in other words, the measure of obliquity of rays which the lens can accept and utlilize and is limited by blurring of image due to spherical aberration of the lens.

Trenching and diversion structures are engineering methods employed to control water flow, especially in agricultural fields and construction sites. Trenching involves the creation of narrow and deep excavations, primarily used for laying utilities, drainage systems, or other underground infrastructure. These trenches, often deeper than they are wide, require careful design and adherence to safety protocols to prevent cave-ins and ensure worker safety.
Diversion structures, such as ditches, channels, or small dams, are designed to redirect the flow of water away from vulnerable areas. They help manage surface runoff, reduce erosion, and provide controlled irrigation. In construction settings, these systems protect worksites and foundations from water damage, while in agriculture, they optimize water usage and prevent soil degradation. Together, these techniques play a vital role in water management and land preservation.
PURPOSE AND UTILITY OF TRENCHES
Trenching serves a wide range of purposes in civil engineering and construction projects. It is commonly used for installing essential underground infrastructure such as water pipes, electrical cables, sewage systems, and telephone lines. In residential settings, trenching is frequently employed for tasks like laying irrigation systems, connecting plumbing lines, installing electrical cables, and placing pipes for heating systems.
At the municipal or city level, trenching plays a critical role in establishing and maintaining public utility networks. It enables the installation of extensive drainage systems, sewer pipelines, and city-wide electrical and communication lines. Proper trenching ensures the safe and efficient placement of these utilities while minimizing surface disruption and ensuring long-term functionality

Introduction

Indian arid zone is one of the largest subtropical deserts of the world of which 20% is arid and rest is semi-arid. Hot arid zone is spread over 31.7 million ha area and mainly confined in the states of Rajasthan, Gujarat, Andhra Pradesh, Punjab and Haryana. The major part of hot arid region of the country lies in western Rajasthan (19.62 mha) followed by North-western Gujarat (2.16 mha). It is characterized by high aridity index, extremes of temperature low and variable precipitation, very high wind velocity and dust storm, high soil pH, high infiltration rate, very limited availability of groundwater and saline ground irrigation water (More, 2010). Under such harsh climatic conditions cultivation of vegetable crops in open condition results in very low and poor-quality yield which fetches less return per unit area. By creating the suitable micro-climate for plant growth round the year cultivation of vegetables can be done under adverse climatic conditions. It is possible through protected cultivation which has tremendous scope in peri-urban areas of the country (Singh and Sirohi, 2004). It is the best way to increase the productivity and quality of vegetables, especially cucurbits. India is the second largest producer of vegetables in the world next only to China. Presently India has 178.17 million tonnes of total vegetable production, but the productivity and quality of most of the vegetable crops is very poor (17.40 t/ ha) due to several biotic and abiotic stresses due to open field cultivation. In Rajasthan, the total production of vegetables is very less i.e. only 1.81 million tonnes from an area of 0.17 m ha with a productivity of 10.66 t/ ha.

2.1. Types of plant diseases

2.1.1. Types of infection

1. Localized diseases

5.1. Types of farming

Arable: Crops.

Pastoral: Animals.

Mixed: Crops and animals.

Subsistence: Grown just for the farmer and his family

Commercial: Grown to sell.

Intensive: High inputs of labour or capital usually small.

Extensive: Low inputs of labour or capital.

Sedentary: Permanently in one place.

Nomadic: The farmers move around to find new areas to farm.

Classification of the farming systems based on following criteria

Available natural resources, include water, land, grazing areas and forest; climate especially altitude; landscape including slope; farm size, tenure and organization.

Dominant pattern of farm activities and household livelihoods, include field crops, livestock, trees, aquaculture, hunting and gathering, processing and off-farm activities.

Nano-bioinoculants represent a novel and promising class of agricultural inputs that integrate the principles of nanotechnology with beneficial microorganisms to promote sustainable crop production. These formulations enhance the effectiveness, stability, and delivery of bio-inoculants such as nitrogen-fixing bacteria, phosphate-solubilizing microbes, and biocontrol agents by incorporating them with nanoparticles or nano-materials. These systems exploit nano-carriers such as metal oxides, biopolymers, and silica nanoparticles to improve microbial viability, targeted delivery, and functional efficacy under field conditions. Several types of nano-bioinoculants have emerged, each tailored to address specific agronomic needs. Nano-formulated Rhizobium spp. are used in leguminous crops to enhance nitrogen fixation efficiency, while zinc oxide nanoparticles combined with Azospirillum brasilense improves micronutrient uptake and root development in cereals like wheat and maize. Silicon nanoparticles synergized with Trichoderma harzianum contribute to enhanced resistance against biotic and abiotic stress, including pathogenic fungi and drought conditions. Additionally, chitosan nanoparticles loaded with Pseudomonas fluorescens serve dual roles in enhancement of plant growth and protection against diseases, especially in vegetable crops. Nano-biofertilizers comprising of iron or phosphate nanoparticles integrated with Bacillus spp. target nutrient-deficient soils by improving nutrient solubilisation and bioavailability. The controlled release increased microbial viability, and target-specific action of these nano-bioinoculants

The biosphere or part of the earth and its atmosphere where life is found is made of different size of ecosystem regulated by solar energy. Ecosystems have both biotic and abiotic components. The biotic component comprises closely interacting groups of flora and fauna having varying energy needs which comprise heterotrophic, chemoautotrophic and photoautotrophic microorganisms.

Biodiversity refers to the richness of life as manifested by their morphological, cultural and biochemical characteristics of microorganism and their interdependence in habitat. It is because of biodiversity that each ecosystem functions as the basic life support system of the planet earth. Biodiversity sustains the food and nutrition security of human beings and mediates the ecological process by resisting environmental perturbations in a given soil and climatic conditions.

Presently greater emphasis is being placed on the biodiversity of above ground biotic components belonging to plant and animal kingdom. The living organisms in soil and their diversity in relation to their contribution to sustainable agriculture often do not receive adequate attention. Without taking into considerations the magnitude and understanding of the global diversity will be fragmentary. However, management of below ground biodiversity is being focused presently by several national and international bodies.

Normally we associate our agriculture and food supply with farms and villages. The new trends of greener cities and urban and peri urban horticulture (UPH) are emerging very fast. Towns and cities in the world’s developing countries are growing at great speed. Ten years ago, an estimated 40 percent of the developing world’s population or 2 billion people lived in urban areas. Since then, their numbers have expanded twice as fast as total population growth, to more than 2.5 billion. By 2025, more than half the developing world’s population of 3.5 billion will be urban. Again most of the world’s fastest growing cities are in Asia and Africa with young population.

Different basic as well as advanced laboratory equipment need to be used in a laboratory while conducting experiments. Many of them like pH meter, laminar air-flow hood, viscometer, thermometer, magnetic stirrer, microwave ovens, incubators, sand-bath, water-bath, oil-bath, etc. are the basic and simple equipment which require to be used routinely while conducting experiments in a laboratory. However, basic knowledge of their operation, handling procedure, when to be used, how to be used, and more importantly what not to be done with it, etc. are essential for keeping them in serviceable condition as well as for the accuracy/precision in their operation. In this chapter, we will discuss about some of the routinely used laboratory equipment along, while some other sophisticated equipment will be discussed in other chapters.

pH Meter

A pH meter measures exactly the H+ concentration of a solution; thus indicates acidity or alkalinity of a solution with greater precision. Actually, it measures the difference in electrical potential between a pH electrode and a reference electrode, and display the results converted into the corresponding pH value. Electrode is the key part (rod-like structure, usually made of glass) of a pH meter, having a bulb at the bottom containing a sensor. The pH meters range from simple and inexpensive pen-like devices (portable/pocket pH meter) to complex and expensive laboratory instruments with computer interface (Figure 5.1).

Frequent calibration of a pH meter using the solutions of known pH (standard solution of pH 4.01, 7.00, 10.01, Figure 5.2), generally before each use, ensures the accuracy of the instrument. For very precise work the pH meter should be calibrated before each measurement. For normal use calibration should be performed at the beginning of each day. This is necessary because the glass electrode does not give a reproducible measurement over a longer period of time.