eChapters

Introduction

To accomplish experimentations in laboratories, sometimes we need microscope to test/validate our ideas/findings. A microscope is needed to examine objects which are very small which cannot be visualised by naked eyes. However, microscopic study requires some expertise in operating the microscope, particularly the sophisticated microscopes, as well as to prepare (peeling, sections, cutting, fixation, staining, dehydration, mounting, etc.) the sample, so that it can be appropriately examined for the anticipated details.

According to the scientific requirements different types of microscopes are used in the laboratories for research purpose. In this chapter, our aim is to acquaint you with the basics of using and handling of microscopes, particularly a compound microscope that is commonly used by the graduate and post graduate students for basic research.

Microscopy is often designated as the scientific investigation that is employed to review and analyse minute structures and objects using a microscope. The term “microscope” has been derived from ancient Greek words “micros” meaning “small” and “skopeîn” meaning “to look at or see,”.

Microscope

A microscope is a laboratory instrument used to examine objects (biological specimens) which are too small to be seen by the naked eye. The microscope must accomplish three tasks:

• Magnification- to provide a magnified image of the specimen.

• Resolution- to separate the details in the image.

• Contrast- to render the details clearly visible to the eyes.

Although we will tnroduce to you the different types of microscopes used for different speciments, our main focus is to discuss about compound microscope, which is commonly used in the laboratories. Compound microscope was developed around the beginning of 17th century.

A variety of glassware like burettes, pipettes, measuring cylinders, flasks, separating funnel etc. are used for experimental purposes in a laboratory. All of these need to be used and handled correctly, otherwise the chances of experimental error and damage to the glassware increase significantly. Being made of glass, they need special care while washing and using in experiments because even a minor mistake in handling of glassware may result in breakage of the apparatus. With this precautionary note, let us discuss about some of the specific glassware used in the laboratories.

Burette

Burette is a long graduated glass tube with a stopcock at one end for delivering a known/desired volume of a liquid, especially in titration experiments. It contains a stopcock at the lower end and a tapered capillary tube as the stopcock’s outlet. The flow rate of liquid from the tub stopcock’s outlet can be controlled with the help of stopcock valve. Burette is used for measuring the volume of a solution/chemical added in a quantitative (titrimetric) estimation experiment.

Procedure of using a Burette

The burette reading must be noted before and after delivering the chemical/ solution from the burette. The difference in these two readings is the volume of the chemical/solution released out of the burette. The solution should be released slowly/drop-by-drop to avoid any experimental error/mistake. If the solution/chemical is allowed to pour out too fast, the wall of the burette will not drain properly and some liquid may remain sticking to the surface of the walls. Moreover, excessive amount of chemical may be released/dropped during the experiment, particularly during the titration experiment wherein we need to know the exact amount of acid/base needed to get neutralization point. Thus, any minor mistake may lead to get a faulty reading. The measuring capacity of a burette usually used in a laboratory is 50 mL.

Since mouth pipetting of liquid reagents in a laboratory is not advisable, different tools are needed for safe, easier, and precise dispensing of liquid reagents. This chapter is devoted to make you aware of the tools like vacupette and micropipette which can be used for the handling of liquid reagents in a safe and precise way.

Vacupette

Glass pipettes have been traditionally used by sucking liquid solvent/solution directly using mouth. For safety reasons, mouth pipetting is no longer permitted in a laboratory. Hence, to fill a pipette vacupette is used by placing it on the top of glass or plastic pipette. It acts as a device to create vacuum for filling reagent in the pipette as well as for releasing the reagent with mechanical regulation on the flow out of the liquid. Vacupette can be of different types.

1. Rubber Bulb Vacupette

Rubber bulb vacupette is often used to transfer (pump up and discharge) liquid using a pipette when a larger quantity of chemicals is to be transferred. Small/tiny rubber bulb is attached to glass/plastic pipette for drawing little amount of reagents. Small vacupette is used to precisely discharge smaller volume/ drops.

Handling of Vacupette

• Insert the top of a pipette in the bottom of the rubber bulb vacupette (Figure 6.1).

• Remove air from the pipette by squeezing valve “A” at the top of the vacupette while simultaneously squeezing the rubber bulb. The amount of air released depends on the size of the rubber bulb.

1. Introduction
In the realm of modern agriculture, achieving sustainability is paramount. The judicious use of resources and the maintenance of soil and crop health are vital components of this endeavor. Remote sensing is a powerful technique used to gather information about the Earth’s atmosphere and surface without direct physical contact (Lillesand et al., 2015). It involves the acquisition, measurement, and analysis of data from sensors aboard platforms such as satellites, airplanes, drones, or ground-based instruments. These sensors record electromagnetic radiation, providing valuable insights into various aspects of the Earth’s environment. Remote sensing technology has emerged as an invaluable tool for achieving these objectives, offering a range of benefits for sustainable agriculture (Jensen, 2009). With the advent of modern technologies such as hyperspectral remote sensing (HRS) that collects information in narrow contiguous bands, many new avenues of applications have come up. This detailed spectral information enables the precise identification and classification of objects based on their unique spectral signatures. Further, the narrow spectral reflectance provides significant information regarding the biophysical, biochemical, and physiological parameters of crops. These characteristics of HRS provides opportunities for improved feature identification, anomaly detection, and quantification. Often HRS data also complement to the remote sensing data, such as LiDAR or SAR (Synthetic Aperture Radar), allowing for a more comprehensive understanding of the Earth’s surface and its features. All these features of HRS enables precision agriculture, allowing the management practices as per the specific needs of the fields. By assessing soil and crop conditions remotely, one can apply resources like water, fertilizers, and pesticides precisely where and when they are needed. This minimizes waste and reduces the environmental impact of agricultural operations. Hyperspectral remote sensing can also assess critical soil parameters such as moisture content, pH levels, and nutrient concentrations. Monitoring these factors over time helps farmers make informed decisions about soil management and the choice of suitable crops. It also aids in preventing soil degradation and erosion. Early detection of stressors like pests, diseases, and nutrient deficiencies is crucial for maintaining crop health and maximizing yields. Remote sensing provides a timely and accurate means of monitoring crop conditions across large areas, enabling rapid responses to threats and reducing yield losses. In regions with water scarcity, efficient water management is essential. Remote sensing can track soil moisture levels and assess irrigation needs. By optimizing irrigation practices, farmers can conserve water resources while maintaining crop productivity. Remote sensing, particularly hyperspectral remote sensing can detect changes in

4.1. Information and Communication Technology

Refers to technologies that provide access to information through telecommunications.

Similar to IT, but focuses on communication technologies.

Includes the Internet, wireless network, cell phones, and other communication medium.

11.1 Introduction

Nanotechnology is the manipulation or self-assembly of individual atoms, molecules, or molecular clusters into structures to create materials and devices with new or vastly different properties. Nanotechnology can work from the top down (which means reducing the size of the smallest structures to the nanoscale e.g. photonics applications in nanoelectronics and nanoengineering) or the bottom up (which involves manipulating individual atoms and molecules into nanostructures and more closely resembles chemistry or biology). The definition of nanotechnology is based on the prefix “nano” which is from the Greek word meaning “dwarf”. In more technical terms, the word “nano” means 10-9, or one billionth of something. It is a very promising new branch of small-scale technology named for the unit of measure at which it operates: the nanometer. Nanotechnology enables us to create functional materials, devices, and systems by controlling matter at the atomic and molecular scales, and to exploit novel properties and phenomena. Consider that most chemical and biological sensors, as well as many physical sensors, depend on interactions occurring at these levels and you’ll get an idea of the effect nanotechnology will have on the sensor world.

Phosphorus is one of the key nutrients required for higher and sustained productivity of potato and its influence on tuber yield is very well established. Phosphatic fertilizers are expensive and in developing countries like India, they are either imported or manufactured using imported raw material. Due to increase in cost in the recent past, there has been a decreasing trend in the amounts of P fertilizer applied in India (Sundara and Natarajan, 1997 and Sundara, 1988). At the same time, soils contain substantial reserves of total P, most of it remains relatively inert, and only less than 10% of soil P enters the plant–animal cycle (Kucey et al., 1989). Upon addition to the soils, soluble phosphates react with the constituents of the soil and form compounds that are less soluble. This conversion depends upon the soil type. In acid soils, the reaction products are aluminium and iron phosphates and in the predominantly calcareous soils, the reaction products are calcium phosphates. As a result most of the P applied (often as much as 90%) is rendered unavailable for crop uptake but is retained in insoluble form. This is the reason that the potato-based cropping systems in different potato growing pockets generally show positive P balance resulting into its build up (Singh et al., 1994). Thus, soils commonly have large reserves of ‘fixed’ P that could support long-term crop requirements if it could be mobilized through appropriate soil management including use of P-solubilizing microbes. The ability of phosphate solubilizing bacteria (PSB) to convert insoluble forms of phosphorus to an accessible form is an important trait in sustainable farming for increasing plant yields (Singh and Kapoor, 1994). The beneficial effects of PSB on crop productivity have been widely described. These soil phosphate solubilizing bacteria stay near the roots and make the phosphorus available to plants from soil.

In nature there are nearly 300 nuclei, consisting of different elements and their isotopes. Isotopes are nuclei having the same number of protons but different number of neutrons. These techniques are now being used in almost all the areas of plant physiology, soil chemistry and plant biochemistry. In agriculture, radioisotopes are used in the nutritional studies of major and minor elements, plant metabolism, mechanism of photosynthesis studies, and uptake of nutrients and ions mobility in soil. In applying this technique, a minute quantity of radioisotope element is usually mixed with ordinary element of the same kind, the whole batch is termed “tagged” and their role in chemical reactions is traced. The radio labeled fertilizer has been used to study the uptake, retention and utilization of fertilizers.

Radioisotopes are used for determining the function of fertilizer in different plants. The tracer technique is used to study the rate and direction of movement of an element in a plant. For this a radioisotope of that element is injected in the ground near the plant. After a few days the plant is laid on a photographic paper to produce an autoradiograph. The dark areas in the radiograph show the positions reached by the element. This technique gives valuable information regarding the optimum season for fertilizing crops and for poisoning weeds. Use of N¹⁵ in organic fertilizer studies has significantly advanced the understanding of N release from organic materials. Crop residue or green manure studies are relatively simple. These techniques have been extremely useful in determining how residue quality parameters affect mineralization values. Because of the attention focused on nutrient cycling and management studies in recent years, a number of new P isotope techniques have been developed.

1. Neutron activation analysis

This technique is used in qualitative and quantitative analysis. If an element present in a sample is to be identified by neutron activation analysis, the sample will be bombarded with slow neutrons or other charged particles and converted into radioisotope. It is one of the most sensitive and specific methods available for the determination of trace quantities of a wide range of elements. From the half life measurement, it is possible to identify the element from which the radioisotope has resulted. Also the quantity of element present in a given sample can be calculated by this technique.

Introduction

Global population growth has led to an increase in demand for energy, food, and other essentials, resulting in an increase in agricultural land. Poor farming techniques, urbanization, and a lack of soil management measures have negative consequences for agricultural soils, such as reduced soil fertility, migration of soil organisms, and loss of soil microbiota and ultimately loss of soil health(Mehmood et al., 2020; Omotayo and Babalola, 2021; Syed et al., 2022). In addition, fertilizers used in agriculture have an impact on soil quality and health. Soil fertility is defined as the ability of a soil to meet the physico-chemical and biological requirements of a plant for growth, reproduction and quality, taking into account plant and soil type, land use and climatic conditions (Abbott and Murphy, 2007; Tyagi et al., 2019).

1. Introduction
Global food insecurity is a prominent concern today, and this concern continues to haunt with exponential population growth, coupled with significant climate changes. The global population has increased at a rapid rate to around 8 billion in number which has led to a corresponding rise in food demand worldwide (UNFPA, 2023). Consequently, ensuring ample crop production has emerged as a primary objective for the entire world. According to World Bank (2023), an important strategy to bring down extreme poverty levels, fostering shared prosperity and providing sustainability for the expected population rise of 9.7 billion is agricultural development by 2050. Nevertheless, optimizing the productivity of a crop is never an easy task. Crop plants continuously face exposure to different abiotic and/or biotic factors, which retard growth and development processes ensuing their reduced productivity and diminished crop quality. Agricultural crops are vulnerable to biotic stresses such as bacteria, nematodes, fungi and herbivores. In addition to biotic factors, these challenges are further exacerbated by abiotic stresses like flooding/waterlogging, drought, temperature variations, soil salinity/alkalinity, heavy metals, nutrient deficiencies and CO2. They have a detrimental impact on crop at different stages of plant growth, ranging from entire plant to tissue and sub-cellular structures. Moreover, the abiotic stressors cause a direct impact on crops by inducing protein denaturation and aggregation, while also increasing the fluidity of membrane lipids (Kumari, 2022). According to Oshunsanya et al. (2019) major abiotic stresses i.e. extreme temperatures, drought, and nutrient deficiency/toxicity, contributes to significant annual crop yield losses ranging from 51-82% worldwide. On the other hand, yield penalties due to waterlogging merely is supposed to increase from 3–11% today to around 10–20% by 2080 (Liu et al., 2023). Daryanto et al. (2016) reviewed the published literatures from 1980-2015 and reported global yield reductions due to drought estimating around 21 % and 40%, respectively in wheat and maize.

5.1 Introduction
One of the main methods for cost avoidance and prevention is value engineering/ value analysis. “Society of American Value Engineers (SAVE)” states that value Analysis is the systematic use of known procedures which determine the function of a product or service, define a monetary value for the function, and provide the essential function reliably at the lowest overall cost. If these are applied to a new product, it is called value engineering. By analysing the function of any product, material part, component, system, or service, it is possible to find extraneous expenditures connected with them and effectively remove them without compromising the product’s quality, functional dependability, or ability to provide services. The principles and steps of value analysis/ value engineering will supplement the effort of design thinking.
5.2 Symptoms for Introducing Value Analysis (VA)
If one or more of the following symptoms exist, starting a VA programme is expected to yield very positive effects.
i. Sales of the company’s products are declining.
ii. The prices of the products of the company are greater than those of the products of its rivals.

Introduction

Soil is a dynamic natural body, characterized by high degree of spatial variability due to combined effect of physical, chemical or biological processes that operate with different intensities at different scales (Goovaerts 1998). Reports have shown that there is large variability in soil properties, crop yield, disease, weed etc., not only in large-sized fields (Godwin and Miller 2003,Vrindts et al. 2005), but also in small-sized fields (Bhattacharya et al. 2008). Therefore, knowledge of hydro-physical properties of soils is crucial for management practices for all kinds of agricultural practices for efficient utilization of input resources. Plant growth and development is highly related to soil hydro-physical properties, which not only depend on soil intrinsic textural and chemical characteristics (Hamza and Anderson 2005) but also on soil management.

Soil physical properties which change with the variation in soil structure include bulk density, total porosity, pore geometry (size distribution, shape, continuity and tortuosity), penetration resistance and aggregate stability, consequently affecting soil hydraulic properties such as water retention characteristics, plant available water capacity, infiltration capacity and saturated hydraulic conductivity. These soil properties are dependent on seasonal climatic conditions, management practices, crop development and biological activity (Reynolds et al. 2007). The hydro-physical properties of soils, i.e., water retention and water permeability in both saturated and unsaturated zones not only shape soil water balance but also decide the conditions for plant growth, development and yield. They also determine water availability for the plant root system and the transfer of water with chemical compounds dissolved in it into deeper layers.

Introduction

Vegetables are important constituents of Indian agriculture and play important role in nutritional security due to their short duration, high yield, nutritional richness, economic viability and ability to generate on-farm and off-farm employment. Vegetables form an integral part of staple diet in India where 42% population is vegetarian and vegetables are sources of daily requirement of nutrients, vitamins and minerals. Our country is blessed with diverse agro-climates with distinct seasons, making it possible to grow wide array of vegetables. The role of vegetable cultivation in the country’s nutritional security, poverty alleviation and employment generation is becoming increasingly important. There are vast opportunities available in export sector, which need to be harnessed to their fullest ability. Vegetable crops have high yield potential and calories per unit area compared to that of cereals in the shortest time. Additionally, vegetable cultivation creates employment in rural sector, as it is a labour intensive farming practice. Vegetables are good source of ready farm income, besides being rich in health building substances, especially protective nutrients (Kalia, 2010 and Meena et al., 2016).

12.1. Variety release

Superior cultivars are to be purified by breeder and tested for genuiness in 7 generations.

Then, they are forwarded to MLT after RYT, RRYT, PYT and CYT in respective research station.

Based on results of the MLT, strain is forwarded to Adaptive Research Trials (ART).

Vermicomposting is the process of turning organic debris into worm castings by earthworms.

Earthworms feed on decaying material, pass through alimentary canals and excreted as castings.

pH of the castings is 7 (neutral) and the castings are odourless.

Contain high amounts of nitrogen, potassium, phosphorus, calcium, and magnesium.

Contains 5 times the available nitrogen, 7 times the available potash, and 1 ½ times more calcium and rich in humus.

Improves aeration, porosity, structure, drainage, and moisture holding capacity.

Secondary standard solution

Solution of chemicals which lack one (or) all the properties for a primary standard

A solution standardised by titrating a primary standard

Less accurate than a primary standard

Volumetric Analysis

Measurement of volume of reagents required for the completion of reactions

Also called titrimetry – most widely used techniques of chemical analysis

Rapid, accurate, convenient and inexpensive

Volumetric analysis, also known as titrimetric analysis, is an analytical method of estimating the concentration of a known solute (analyte) in a solution by measuring the volume of a second known solution of known concentration (standard solution), that reacts completely with the known solute of unknown concentration. The prerequisite of titration is that the two different analytes, present in solution form, must involve in a fast chemical reaction. The standard solution is more commonly known as ‘titrant’ and the solution whose concentration needs to be determined is frequently called ‘titrand’.