eChapters

Introduction
Plant breeding and genetics are at the forefront of agricultural innovation, playing a crucial role in enhancing crop traits to meet the ever-growing demands for food, fiber, and fuel. This chapter delves into the scientific principles, methods, and modern advancements in plant breeding and genetics, providing a comprehensive understanding of how these disciplines contribute to global food security and environmental sustainability. The chapter begins by exploring the fundamental principles of plant breeding, including heredity, genetic variation, selection, and hybridization. These concepts form the foundation for developing new plant varieties that exhibit desirable traits such as improved yield, disease resistance, and environmental adaptability. The importance of genetic variation is emphasized as a key driver of plant improvement, with discussions on the sources of genetic variation, the role of germplasm resources, and the impact of genetic diversity on plant adaptation. As the chapter progresses, various breeding techniques and strategies are examined, including mass selection, pedigree breeding, backcrossing, and markerassisted breeding. These methods are crucial for developing new plant varieties that can withstand the challenges posed by climate change, pests, and diseases. The chapter also addresses the role of genomics in plant breeding, highlighting the significance of genomic selection, gene editing, and bioinformatics in accelerating the breeding process and enhancing crop traits. The chapter further explores the controversial topic of genetically modified organisms (GMOs), discussing the principles of genetic engineering, the rise of genetically modified crops, and the associated controversies and concerns. The importance of GMOs in addressing global food security and environmental challenges is also discussed, providing a balanced perspective on their potential benefits and risks. The chapter concludes by emphasizing the critical role of plant breeding and genetics in ensuring food security and combating global warming. By developing climate-resilient crop varieties, improving water efficiency, and enhancing disease and pest resistance, plant breeding and genetics can contribute to sustainable agricultural practices that reduce greenhouse gas emissions and conserve natural resources

Introduction
Horticulture, the science and art of cultivating fruits, vegetables, and ornamental plants, is a vital component of agriculture that contributes significantly to food security, economic growth, and environmental sustainability. This chapter provides a comprehensive overview of horticulture, exploring its various branches, including fruit and vegetable production, floriculture, landscape design, and greenhouse management. Horticulture is unique in its integration of scientific principles, artistic design, and business acumen, making it a dynamic and multifaceted field.
The chapter begins by introducing the fundamental concepts of horticulture and its importance in modern agriculture. It delves into the specifics of fruit and vegetable production, emphasizing the techniques and practices that enhance yield and quality. Floriculture and landscape design are also discussed, highlighting the aesthetic and environmental benefits of ornamental plants. The chapter further explores post-harvest handling and storage, crucial aspects that ensure the longevity and marketability of horticultural products.
In addition to traditional practices, the chapter addresses modern horticultural techniques, such as greenhouse management, which plays a crucial role in extending growing seasons and improving crop quality. Sustainable horticultural practices are also emphasized as key strategies for addressing global challenges like climate change and food security.
Horticulture is a branch of agriculture that focuses on the cultivation, production, and management of plants, particularly fruits, vegetables, ornamental plants, and flowers. This chapter explores various aspects of horticulture, including an introduction to horticulture, fruit and vegetable production, greenhouse management, floriculture and landscape design, and post-harvest handling and storage. Horticulture plays a vital role in agriculture, encompassing the science and art of growing plants for food, aesthetics, and environmental enhancement. This chapter delves into the exciting world of horticulture, exploring the cultivation and management of fruits, vegetables, ornamental plants, and flowers. Horticulture combines scientific knowledge, practical skills, and artistic creativity to maximize plant growth, yield, and aesthetic appeal. By studying horticulture, we can gain insights into the principles and practices that contribute to successful fruit and vegetable production, greenhouse management, floriculture and landscape

Introduction
Environmental science plays a critical role in understanding and addressing the complex interactions between human activities and the natural world. This chapter explores the intersection of environmental science and agriculture, emphasizing the importance of ecological balance for sustainable development. As agriculture continues to be a major driver of environmental change, understanding its impacts on ecosystems, biodiversity, and climate is crucial for developing strategies that promote sustainability.
The chapter begins by examining the environmental impacts of agriculture, including land degradation, deforestation, and pollution. It then explores agroecology and biodiversity, highlighting the importance of maintaining diverse ecosystems to support sustainable agricultural practices. Sustainable resource management is discussed as a key approach to conserving natural resources and minimizing the environmental footprint of agriculture.
Climate-smart agriculture, a modern concept that integrates environmental sustainability with agricultural productivity, is introduced as a solution to mitigate the effects of climate change while ensuring food security. The chapter also covers environmental regulations and policies, which are essential for guiding sustainable agricultural practices and protecting the environment.
As the chapter progresses, it delves into the importance of environmental science in food security, the impact of environmental factors on global warming, and various modern concepts in environmental science, including sustainable food systems, circular economy, and ecosystem-based approaches. The chapter concludes with a discussion on combating food security and global warming challenges through sustainable practices and policies.
Environmental science plays a crucial role in agriculture by studying the interactions between agricultural practices and the natural environment. This chapter explores various aspects of environmental science in agriculture, including the environmental impacts of agriculture, agroecology and biodiversity, sustainable resource management, climate-smart agriculture, and environmental regulations and policies. Agriculture and the environment are inherently interconnected, as agricultural practices have both direct and indirect impacts on the natural environment. Environmental science in agriculture aims to understand these impacts and develop sustainable practices that minimize negative environmental

Introduction Soil, often referred to as the “skin of the earth,” is a critical component of our planet’s ecosystem, serving as the foundation for all terrestrial life. This chapter explores the science of soil, delving into its formation, classification, and the complex properties that define its role in agriculture and environmental sustainability. Understanding soil is fundamental to addressing global challenges such as food security, climate change, and sustainable land management. The chapter begins with an examination of soil formation and classification, providing insights into the diverse types of soils that exist across different landscapes. It then discusses the physical and chemical properties of soil, including their impact on soil health and fertility. The role of soil microbiology is highlighted, emphasizing the importance of microorganisms in maintaining soil health and promoting plant growth. As we progress through the chapter, we explore modern concepts in soil science, including sustainable soil management practices and their significance in mitigating the effects of global warming. The chapter also addresses the crucial role of soil in food security, demonstrating how effective soil management can enhance agricultural productivity and resilience in the face of climate change. Finally, the chapter touches upon the threats to soil health and the importance of sustainable soil management in ensuring a prosperous future for all. Soil science is a vital discipline within agriculture that focuses on the study of soils and their properties. This chapter delves into various aspects of soil science, including soil formation and classification, soil physical and chemical properties, soil fertility and nutrient cycling, soil conservation and erosion control, and soil microbiology and soil health. Soil is the foundation of agriculture, providing the medium for plant growth and supporting the intricate web of life that sustains our ecosystems. Understanding the science of soil is essential for optimizing crop production, protecting natural resources, and ensuring sustainable land management practices. In this chapter, we will explore the fascinating world of soil science, delving into its various aspects to gain insights into soil formation, composition, fertility, and conservation. By understanding the principles and processes underlying soil science, we can make informed decisions to enhance soil health, maximize nutrient availability, mitigate erosion, and promote sustainable agricultural practices.

Introduction
Agronomy, the science of crop management, is a cornerstone of agricultural sciences, focusing on the principles and practices that optimize crop production. This chapter delves into the core principles of agronomy, exploring how these practices have evolved over time to meet the challenges of modern agriculture. As the global demand for food intensifies, agronomy has emerged as a critical field that integrates various scientific disciplines to improve crop yields, enhance sustainability, and ensure food security. The chapter begins by outlining the fundamental principles of agronomy, which serve as the foundation for crop management. It then transitions into an exploration of new concepts and innovations that are reshaping the agricultural landscape. These include precision agriculture, vertical farming, agroforestry, urban agriculture, organic farming, and sustainable agriculture practices, all of which contribute to more efficient and environmentally friendly farming systems. The chapter also discusses the role of digital agriculture, climate-smart agriculture, and regenerative practices in addressing the pressing issues of climate change and food security.
By examining these cutting-edge developments, this chapter highlights the importance of agronomy in the context of global challenges such as food security, environmental degradation, and climate change. The role of agronomy in ensuring sustainable food production and its impact on global warming are also discussed, providing a comprehensive overview of the field’s relevance in the 21st century. In the intricate tapestry of agriculture, where the hands of farmers and the mysteries of nature converge, stands a pivotal discipline that orchestrates the dance of growth and sustenance – agronomy. Rooted in science and guided by the rhythms of the seasons, agronomy is the art of orchestrating nature’s symphony to yield the harvests that nourish the world. It’s a testament to human ingenuity and a profound understanding of the intricate balance between the forces that shape our planet.
At its essence, agronomy is the vanguard of crop production, embracing the ever-evolving dialogue between humans and plants. It’s a discipline that transcends mere cultivation, delving into the profound intricacies of plant life, the dynamics of ecosystems, and the manipulation of natural elements to ensure bountiful yields. It’s a synergy of knowledge that marries the wisdom of generations with the cutting-edge revelations of science, all in pursuit of ensuring the sustenance of humanity.

Agriculture is one of the oldest and most fundamental activities of human civilization, serving as the bedrock upon which societies and economies have been built. In its simplest definition, agriculture is the science and practice of cultivating the soil, growing crops, and raising livestock. However, its significance extends far beyond mere food production; it is integral to the economic, social, and environmental fabric of nations. This chapter provides a comprehensive overview of agriculture, beginning with its basic definition and expanding to cover its critical role in human civilization. It delves into the diverse agricultural practices observed in Pakistan, a country where agriculture is not only a tradition but also a cornerstone of the economy. The discussion covers how climate, geography, and government policies influence these practices and shape the challenges and opportunities within the sector. Moreover, this chapter explores the economic impact of agriculture on Pakistan, particularly in terms of employment, poverty alleviation, and rural development. It also addresses the role of agriculture in ensuring food security, the environmental implications of farming practices, and the need for sustainable methods to secure the future of this vital industry. Finally, the chapter touches on the technological advancements and innovations that are driving modern agricultural practices and the broader implications of these changes for the future of farming. In the heartlands of progress and sustenance, where the earth meets the sky, lies a discipline that stands as the foundation of civilizations throughout history – agriculture. More than just a vocation, agriculture is an intricate science that has shaped societies, provided nourishment, and propelled the evolution of humanity. It intertwines the art of nurturing the land with the precision of scientific inquiry, producing a symphony of growth and harvest that sustains life itself. At its core, agriculture is the embodiment of a delicate balance between nature’s offerings and human ingenuity. It’s the art of coaxing the earth’s potential, and the science of unraveling its secrets. From the rhythmic dance of seasons to the intricacies of soil composition, every facet of agriculture is woven into the tapestry of life on Earth. And as we stride into an era where global challenges like population growth, climate change, and resource scarcity loom, the importance of understanding the science behind farming has never been more crucial.

1. Introduction
Drought’ which apparently means lack of water, is one of most vulnerable natural hazards. It alone causes a huge crop loss annually. But history says it not only affects crop but destroys human lives.in the year 1972 almost 600000 people died due to starvation caused by huge drought in Northern India. In simple language drought means shortage of water mainly caused by abnormal climatic condition and damaging to the environment. Ideally there is no such proper definition of drought because it should be region specific and circumstances specific. A per McMahon and Diaz Arenas (1982) define drought as “a period of abnormally dry weather sufficiently prolonged for the lack of precipitation to cause a serious hydrological imbalance, carrying connotations of a moisture deficiency with respect to man’s usage of water”. Apart from these several general definitions have been provided by many authors. Beran and Rodier (1985) gave a definition based on hydrological aspect of drought that, ‘The chief characteristic of a drought is a decrease of water availability in a particular period and over a particular area’. India meteorological department (IMD) has defined drought as a situation in a subdivision in a year when the actual rainfall is less than 75% of the normal annual rainfall. Basically, to define drought the impact on environment and society and their complex interaction must be considered. Drought is defined as a state of total water capacity being within the range of 12-20% for a period of 16 days and can be distinguished from water deficit, which is the state of water capacity falling below 30%. Drought affects crop development, production, productivity and quality and on other hand soil physical, chemical and biological properties.
2. Classification of Drought
As per the hydrological point of view drought can be classified into different Categories: i) On the basis of source from which water is available: -a. Meteorological Drought b. Hydrological drought c. Agricultural Drought. ii) On the basis of time of occurrence: - a. permanent drought area b. Seasonal Drought Area contingent drought. iii) On the basis of medium: - a. soil drought atmospheric drought.

1. Introduction
The amount of water present in the soil is called as soil moisture. The soil moisture availability is an important topic to study as it affects plant growth, agricultural outputs and the water resource management as well. The amount of soil moisture present in a place and in a time depends on the factors like soil type, Land use, vegetation cover of the place and evaporation taking place in that area at that time. The amount of water hold by the pores in the soil determines the soil moisture. This water holding by the soil depends on various factors like temperature, moisture levels, organic matters and the soil living organisms (Rasheed et al., 2022). Essential Climate variable (ECV) is very important to our planet which can be recognized by GCOS (Global Climate Observing System). Important sustainable development issues say drought, flood management, food security, ecological health and water resources are being impacted by the soil moisture. Soil moisture changes have also a role in evapotranspiration, rainfall, and the runoff distribution and intensities. (Zeng et al., 2023).
Soil moisture content (SMC) have a huge impact in shaping the water, carbon cycles of earth and energy balance in different scales of time and space. It is an important factor for the effective water management due to its influence on the precipitation, surface temperature and evaporation which will be affecting the processes say river runoff, vegetation health, and irrigation practices. The highcost traditional methods make to overlook for SMC in environmental modelling (Edokossi et al., 2020). The atmospheric and the land surface process are blinked by the key facto of SMC as said by Robinson et al. (2008). For gaining the knowledge on water, carbon cycles and energy as well as for studying extreme weather conditions, understanding soil moisture is very much needed. (Vereecken et al., 2014; Li et al., 2007; Seneviratne et al., 2010; Robock & Li, 2006).
Due to the soil moisture’s impact on the factors say when to plant, when to blossom and when to harvest the crop, soil moisture should be considered as the important factor as it is in improving the water resources and boost the agricultural output. Remote sensing methods like microwave remote sensing plays vital role in creating maps depicting the distribution of soil moisture spatially and temporally high resolutions. These maps help in effective crop planning, in-season drought assessment, irrigation and soil managements. The traditional methods like TDR probe, Soil moisture utilizing neutron probe and gravimetric methods are inefficient in studying the soil moisture with high spatial and temporal resolutions due to factors like Variations in terrain, soil type and land use pattern. We can overcome these and enhance our ability to map soil moisture in different scales through the recent advancements of microwave remote sensing (active and passive microwave remote sensing) which are having advantages like clear, accurate and timely measurements of soil moisture content.
Irrigation water sources are controlled through the soil moisture studies by executing the sustainable water management plans and by monitoring high yields despite the environmental changes, increasing water demands and climate changes. To predict the agricultural output, irrigation management, drought early warning, creating vegetation indices, soil moisture study with high temporal and spatial resolutions will be a key factor as it improves the crop stress reduction also which are the major driving forces of yield reduction (Doraiswamy et al., 2004). So, the soil moisture has a direct impact on the crop yield which are studied using variable rate technology say selective application of pesticides which can improve farmers financially as well as environmentally (Harris et al.,1964).

1. Introduction
Soil salinity is a global threat which affects crop production and poses challenges to sustainable development in various regions worldwide. Worldwide, salinity and sodicity impact 20% of cultivated land and 33% of irrigated land, respectively (Kumar and Sharma, 2020). Global map of salt–affected soil (SAS) indicated that 0.424 billion hectares of upper soil layer (0–0.3 m) and 0.833 billion hectares of subsoil layer (0.30–1 m) are salt-affected (FAO, 2021) and by 2050, salinization will degrade 50% of agricultural land (Wang et al., 2003). In India, SAS currently occupy 2.1% of total geographical area. Among the SAS, 2.96 million ha is saline and 3.77 million ha is sodic (Narjary et al., 2024). Due to salinity and sodicity, yearly 16.8 million megagram of agricultural produce are wasted in India, costing of ? 230.2 billion (Sharma et al., 2015).
Salt–affected soils are a significant concern in several regions of India. These soils contain high level of sodium salts (NaCl, Na2SO4, NaHCO3, Na2CO3) which adversely affect soil fertility and crop productivity. Here are some areas in India known to have salt–affected soils:
1. Indo–Gangetic Plain: The Indo–Gangetic Plain, spanning across states like Punjab, Haryana, Uttar Pradesh, Bihar, and parts of West Bengal, is prone to salinity issues. Over–irrigation, poor drainage, the presence of salt containing parent materials in the lithology and use of saline irrigation have contributed to soil salinity.
2. Coastal Regions: Coastal regions in India, such as parts of Gujarat, Maharashtra, Tamil Nadu, Andhra Pradesh, Karela, Odisha and Andaman and Nicobar Islands experience salinity problems due to sea water intrusion and the presence of coastal saline soils. These soils are affected by high levels of sodium chloride and other salts, making them unsuitable for cultivation of most arable crops.
3. Arid and Semi–Arid Regions: Arid and semi–arid regions, including areas in Rajasthan, Gujarat, and parts of Madhya Pradesh, face the risk of soil salinization due to low rainfall, high evaporation rates, and poor– quality irrigation water. Waterlogging in these regions can also lead to soil salinization.
4. Irrigation Command Areas: Certain irrigation command areas in different states, including Punjab, Haryana, and Uttar Pradesh, have witnessed salinity problems as a result of improper water management, excessive irrigation, and inadequate drainage infrastructure.

1. Introduction
As climate change advances, risk of managing soil and atmosphere with regard to emission and pollution is going out of hand. Many researches and reports say that currently the global warming is 1.1°C more than the pre-industrial levels, which is not far behind the target of 1.5°C which was agreed by nations under the Paris agreement in 2015 (Janki M, 2023). Achieving that will likely involve removing carbon dioxide from the atmosphere, according to the Intergovernmental Panel on Climate Change. But strategies like capturing and storing the carbon emissions from biofuel-burning power plants, or planting new forests to absorb carbon, can create their own problems. Recently UN security general said we are shifting to the “Era of global boiling” from global warming. Globally countries are witnessing unbearable heat waves, forest fires, irregular rainfall, flashfloods, coral bleaching and unpredictable weather patterns which often resulting in devastating effects on the coastal and hilly regions of the country. Around nine tipping points have been identified so far globally. Climate tipping points are threshold that when crossed leads to irreversible changes in the climate system and will have a severe impact on the living organisms on the earth. All these variations in climate are driving by increasing greenhouse gas (GHG) emissions and global warming. We cannot change the state of atmosphere to as existed thousands or millions of years ago. Only option left with us is to reduce emissions and prevention of further global warming and climate change. As we are already existing in some level of changed climate, responding to climate change involves a two-pronged approach, reducing emissions of and stabilizing the levels of heat-trapping greenhouse gases in the atmosphere through mitigation and secondly, adapting to the climate change. Because climate change is irreversible process.

1. Introduction
Fish and fisheries remains to be an important sector for Indian economy providing food, nutrition as well as employment to a large share of the population. Initiating with a production of merely 7.7 lakh ton of fishes in 1951-52, the country was on its way of increasing the production steadily and has now attained the phenomenal success of producing 162.5 lakh ton during 2021-22. Of this total amount, 41.3 lakh ton has been obtained from marine fisheries and 121.2 lakh ton from inland resources (Anon, 2022). For the inland fisheries production, the contribution of fish culture sector was much lower than that from capture fisheries for several decades during the initial phases. However, the production of culture fisheries maintained a consistently increasing trend and has now surpassed in magnitude the production from capture fisheries sector (Fig.1). With the potential areas for fish culture being gradually used up for different purposes, maintaining such high production rates in coming days will be possible only through optimum management of various factors which govern the productivity of the ponds. Among such factors, one important aspect is nourishing the quality of pond soil and water.

1. Introduction
Studies on soil health and agricultural growth are increasingly using artificial intelligence (AI) and machine learning (ML) techniques. With the help of these technologies, it is possible to analyse vast amounts of data and gain insightful knowledge that will help to boost crop yields and optimise agricultural practises (Neethirajan, 2020). Applications of AI and ML to research crop development and soil health have enormous potential to revolutionise agriculture. In order to increase soil health and crop yield, farmers and researchers can use these technologies to analyse massive datasets, generate precise forecasts, and optimise farming practises. Overall, artificial intelligence (AI) and machine learning (ML) provide useful tools that can support efficient and sustainable agriculture, solving global concerns in food availability and the sustainability of the environment. Unquestionably, technical developments have significantly increased the productivity and efficiency of many industries, including agriculture. The advent of words like “big data,” “data analytics,” “artificial intelligence,” “Internet of Things,” “erosion modelling,” “smart farming,” and “machine learning” are just a few examples of this technological revolution (Almoussawi et al., 2022). Digital soil mapping (DSM) uses computational models to infer regional and temporal shifts of soil types and properties based on soil observations, prior knowledge, and relevant environmental variables in order to create and populate spatial soil information systems. The supply chain for agricultural production is extremely intricate (Lamichhane et al., 2019). The way our food is produced, distributed, and consumed is changing as a result of AI. When planning crop rotations, planting times, water and nutrient management, pest and disease control, optimal harvesting, food marketing, product distribution, food safety, and other agriculture-related tasks throughout every step of the food supply chain, researchers use powered by AI tools to supply advice and expertise. In “Harnessing AI to transform agriculture and inform agricultural research,” Peters et al. (2020) presented a summary of the most recent developments, difficulties, and prospects for AI technology in agriculture. They use the four main elements of the food system—production, distribution, consumption, and uncertainty—to show the possibilities of AI. They come to the conclusion that agricultural businesses are excellent candidates for using AI and other technologies. In “AI down on the farm,” Sudduth et al. (2020), examined a number of case studies in which machine learning (ML) has been used to model various aspects of agricultural production systems and give data that can be utilised to make management decisions at the farm level. These research efforts involve providing data, essential for creating precise and effective irrigation systems and improving tools for suggesting the best nitrogen fertilisation rates for maize. Traditional crop health monitoring techniques need a lot of work and time. Using AI to monitor and detect potential crop problems or nutrient deficits in the soil is an effective method. Applications to analyse plant health trends in agriculture are being created with the aid of deep learning. These AI-powered tools are essential for improving our understanding of soil quality, crop pests, and disease in plants (Virnodkar et al., 2020).

1. Introduction
Sustainable crop production describes farming practices that do not negatively impact the environment, biodiversity, natural agroecosystem, or the quality of the crops produced. Growing crops sustainably improves the system’s capacity to sustain long-term, steady, and uniform levels of food production and quality without raising the need for or increasing the demand for agricultural inputs necessary for effective management. Sustainable crop production deals with keeping the soil healthy with the integrated approach of maintaining organic matter, protecting biodiversity while reducing use of pesticides, ensuring food safety and food quality. It is an approach to grow food to feed our population without adversely affecting the natural ecosystem, soil and biodiversity, natural resources, environment etc. Since the soil is one of the key natural resources for food production, establishing and preserving soil health is crucial for agricultural sustainability and ecosystem function. The distinction between soil quality and health is quite narrow, and the phrases are sometimes used interchangeably. The “fitness for use,” “capacity of a soil to function,” or “the ability of the soil to serve as a natural medium for the growth of plants that sustain human and animal life” are some basic definitions of soil quality (Karlen et al., 1992; Pierce & Larson, 1993; Doran & Parkin, 1994; Acton and Gregorich, 1995; Karlen et al., 1997). Assessment of soil health by analyzing different associated attributes is necessary to monitor its status. However, soil health or quality evaluation focuses on the physical, chemical, and biological parameters which are highly interlinked to one another. All the parameters have their significant effect in governing overall soil health. This chapter will discuss the chemical parameters only which are very much important for the sustainable crop production and have very crucial role in determining the soil health. It will cover important chemical parameters, essential plant and soil nutrients, heavy metals, agrochemicals etc. which having significant effect on soil health determination

1. Introduction
Global food security threatened by climate change is one of the most important challenges in the 21st century to supply sufficient food for the increasing population on diminishing agricultural land while sustaining the already stressed environment. Global agricultural production is highly vulnerable as key crops such as maize, wheat, rice, and legumes will be negatively affected by climate change. The study showed that each degree Celsius increase in global mean temperature is estimated to reduce the average global yield of cereal crops by 6-15%. Further, predicted changes in climate may affect water availability and key soil processes such as respiration and nitrogen (N) mineralization, thus key ecosystem functions such as carbon (C) storage, nutrients, and water availability. Although crop growth simulation models are being utilized to understand the impact of climate change scenarios on aboveground biomass, the roots and their architecture, which are essential for plant adaptation and productivity, need to be studied more due to the difficulty of observing them during the plant life cycle. The root system and its architecture are highly responsive to external environmental conditions such as soil moisture, nutrients, temperature, pH and microbial communities; therefore, it is high time to study below-ground responses to future climate scenarios. The study of plant roots represents a highly promising yet underexplored area of research related to plant growth. While the aerial parts of plants have received significant attention due to their visibility and accessibility, the underground portions have been largely overlooked due to the challenges in observing and sampling them and the disruption caused when roots are removed from the soil. Plants’ efficiency of water and mineral nutrient uptake largely depends on how effectively new root tips penetrate soil horizons and how these roots eventually die and decompose. The plant’s ability to access soil resources depends on the size of its root system and the activity of its growing root tips. Root growth is influenced by both genetic factors and environmental conditions. For example, fine root dynamics vary with the seasons, with increased vegetative growth and nutrient release occurring during the monsoon months. (Kumar et al., 2020). Further research is needed to assess how different tillage and water management practices affect rooting behaviours, soil water extraction, and nutrient uptake.

1. Introduction
Soil is an extremely complex ecosystem and performs many functions, i. e, biomass production; food contingency, fuel and fibre; buffering and transforming actions; breakdown of organic matter; nutrients recycling; carbon sequestration; providing a biological habitat; source of raw materials; and regulation of water quality and supply (Weil and Brady, 2017; Telo da Gama, 2023). However, because of natural as well as anthropogenic reasons, there is a widespread degradation of soils. Soil degradation means deterioration in overall soil functioning which leads to slowdown of distribution of ecosystem services because of the impairment of soil health through anthropogenic perturbations. Therefore, farmers and researchers are very much concerned about soil health and crop productivity. Soil health status and its quality are often used interchangeably and have been defined by research community differently but recently the word soil health is acquiring popularity due to its flexibility in allowing diverse stakeholders, including policymakers to use the term in their own way. Recently, soil health is a topic of much discussion and research (Bünemann et al., 2018). Soil health is described as “the continued capacity of soil to function as a vital living ecosystem that sustains plants, animals, and humans” (USDA-NRCS, 2019). A broader, ecologically based approach is “the capacity of soil to function as a vital living system, within ecosystem and land-use boundaries, to sustain plant and animal productivity, maintain or enhance water and air quality, and promote plant and animal health” (Doran et al., 2000). Soil health refers to the actual capacity of a soil to function, contributing to ecosystem services. Many have defined it as “fitness for use” while the rest regard as “capacity of the soil to function”. Lehmann et al. (2020) stated that the concept of soil health “connects agricultural and soil science to policy, stakeholder needs and sustainable supply-chain management” and compared the soil health concept to soil fertility, soil quality and soil security. Furthermore, they came to a conclusion that soil health is narrower concept than soil security, but more comprehensive than soil quality and even broader than soil fertility, in relation to the current sustainable development goals (SDGs) as proposed by United Nations. From an overall perspective. Soil health comprises of refinement and unification of the chemical, physical, physico-chemical, biophysical, biochemical indicators of soil that supports productivity and environmental quality (Figure 1). Soil can be classified as healthy or unhealthy based on its ability to sustain plant and animal productivity while maintaining air and water quality.

1. Introduction
Global food insecurity is a prominent concern today, and this concern continues to haunt with exponential population growth, coupled with significant climate changes. The global population has increased at a rapid rate to around 8 billion in number which has led to a corresponding rise in food demand worldwide (UNFPA, 2023). Consequently, ensuring ample crop production has emerged as a primary objective for the entire world. According to World Bank (2023), an important strategy to bring down extreme poverty levels, fostering shared prosperity and providing sustainability for the expected population rise of 9.7 billion is agricultural development by 2050. Nevertheless, optimizing the productivity of a crop is never an easy task. Crop plants continuously face exposure to different abiotic and/or biotic factors, which retard growth and development processes ensuing their reduced productivity and diminished crop quality. Agricultural crops are vulnerable to biotic stresses such as bacteria, nematodes, fungi and herbivores. In addition to biotic factors, these challenges are further exacerbated by abiotic stresses like flooding/waterlogging, drought, temperature variations, soil salinity/alkalinity, heavy metals, nutrient deficiencies and CO2. They have a detrimental impact on crop at different stages of plant growth, ranging from entire plant to tissue and sub-cellular structures. Moreover, the abiotic stressors cause a direct impact on crops by inducing protein denaturation and aggregation, while also increasing the fluidity of membrane lipids (Kumari, 2022). According to Oshunsanya et al. (2019) major abiotic stresses i.e. extreme temperatures, drought, and nutrient deficiency/toxicity, contributes to significant annual crop yield losses ranging from 51-82% worldwide. On the other hand, yield penalties due to waterlogging merely is supposed to increase from 3–11% today to around 10–20% by 2080 (Liu et al., 2023). Daryanto et al. (2016) reviewed the published literatures from 1980-2015 and reported global yield reductions due to drought estimating around 21 % and 40%, respectively in wheat and maize.

1. Introduction
Nanotechnology, which involves manipulating and controlling matter at the nanoscale, offers innovative solutions for enhancing soil quality, nutrient management, and remediation of contaminated soils (Lal et al., 2019). According to the Food and Agriculture Organization (FAO, 2015), approximately 33% of global soils are degraded due to erosion, nutrient depletion, and chemical contamination. This degradation poses a severe threat to food security and environmental sustainability. Moreover, the world population is projected to reach 9.7 billion by 2050, placing further pressure on agricultural systems to produce more food without degrading soil resources (Tripathi et al., 2019). In this context, nanotechnology presents a promising avenue for sustainable soil management. The unique properties exhibited by nanomaterials enable precise monitoring, targeted delivery of nutrients, and effective remediation of soil contaminants. Nanosensors equipped with nanomaterials and nanoparticles allow real-time monitoring of soil parameters, enabling farmers to make informed decisions regarding irrigation, fertilization, and pest management (Gogos et al., 2017). For instance, a case study conducted by Smith et al. (2021) demonstrated the effectiveness of nanosensors in monitoring soil moisture levels and optimizing irrigation practices, resulting in a 20% reduction in water usage while maintaining crop yield.
Furthermore, nanotechnology offers innovative solutions for nutrient management in agricultural soils. Nanoencapsulation techniques allow controlled release of fertilizers, minimizing nutrient leaching and improving nutrient uptake by plants (Lal et al., 2019). In a case study by Johnson et al. (2020), the application of nanoencapsulated fertilizers resulted in a 15% increase in nutrient use efficiency and a reduction in fertilizer runoff by 30%, thus improving soil health and reducing environmental pollution.
Moreover, nanomaterials exhibit high sorption and catalytic properties, enabling efficient removal of heavy metal contaminants and organic pollutants from soils, thus mitigating soil contamination risks (Wang et al., 2022). A case study conducted by Chen et al. (2019) demonstrated the successful remediation of a heavily contaminated soil site using iron oxide nanoparticles, resulting in a significant reduction in heavy metal concentrations and improvement in soil health indicators.

1. Introduction
Precision farming, often referred to as precision agriculture, is an advanced agricultural management approach that leverages technology and data-driven strategies to optimize various aspects of farming operations. At its core, precision farming involves the precise measurement and control of variables like soil conditions, crop growth and environmental factors to enhance productivity, sustainability and resource efficiency. This approach encompasses use of a wide range of automated technologies, including Global Positioning System (GPS), Geographic Information Systems (GIS), remote sensing, sensor networks and automated machinery.
The significance of precision farming lies in its potential to revolutionize agriculture by addressing sustainability and conservation of resources. Precision farming is able to tailor farming practices to specific field conditions. This sitespecific management approach minimizes resource wastage, incumbent costs and environmental hazards. It enhances crop management through real-time monitoring and data analysis. By the use of GPS fitted automated machinery, drones and robotic harvesters and advanced decision support system labour costs are reduced and efficiency is increased (Gebbers and Adamchuk, 2010).By employing soil sensors, and satellite imagery, farmers can gain valuable insights of soil moisture, nutrient levels and pest infestations which helps in irrigation scheduling and adequate fertilizer application (Srinivasan et al., 2019). In contemporary agriculture, the need for sensor-based approaches in soil management has become increasingly apparent. These approaches harness cuttingedge technology and data-driven solutions to optimize soil health, crop production and resource utilization. One of the primary advantages of sensor-based approaches is their ability to monitor soil moisture levels. Soil moisture sensors, such as those based on time-domain reflectometry (TDR) or capacitance technology, provide continuous data on soil moisture content at different depths (Dzikiti et al., 2012). In addition to monitoring moisture and nutrients, sensors can assess other vital soil parameters. Soil pH sensors help maintain the optimal pH level for crop growth, as soil pH can affect nutrient availability. Compaction sensors identify areas of soil compaction, allowing for targeted tillage practices to alleviate compaction and improve root growth. These are just a few examples of how physical parameter sensors can address soil health challenges, as documented in studies by Marchetti et al. (2018) which emphasizes the role of sensors in mitigating soil erosion. Chemical parameters sensors like soil nutrient sensors, such as ion-selective electrodes, can measure key nutrients like nitrogen, phosphorus and potassium. This information enables farmers to tailor their fertilization practices with pinpoint accuracy through variable rate technology (VRT) (Zhao et al., 2018). Moreover, sensor data can be integrated with Geographic Information Systems (GIS) and global positioning systems (GPS) to create detailed soil maps, aiding in sitespecific management strategies.

1. Introduction
Soil hydrothermal regime refers to the distribution and movement of water and heat within the soil. It describes the patterns of soil moisture and temperature variation over time and space. Understanding the hydrothermal regime is important in agriculture, ecology, and engineering, as it affects various soil processes, plant growth, and the behaviour of soil-related structures. The hydrothermal regime of soil is influenced by several factors, including climate, topography, vegetation, soil properties, and land use practices. The movement of water within the soil is driven by precipitation, irrigation, evaporation, and plant uptake (Aggarwal et al., 2009). It can be affected by soil physical properties such as soil texture, structure, porosity, and permeability. Water moves through the soil in response to hydraulic gradients, which are determined by the difference in soil water potential. Soil temperature is influenced by solar radiation, air temperature, and heat fluxes at the soil surface. It varies with depth and can be affected by factors such as soil color, moisture content, vegetation cover, and the thermal properties of the soil. The hydrothermal regime of soil has significant implications for plant growth and development. It affects processes such as seed germination, root growth, nutrient availability, and microbial activity. It also plays a crucial role in soil erosion, groundwater recharge, and the movement of pollutants within the soil profile. Soil’s thermal properties are pivotal in determining the microclimate, which subsequently influences critical stages like seed germination, the growth of seedlings, and the successful established of a crop stand. These properties are vital for modelling the movement of energy, water, and nutrients in soil. Soil thermal regimes are shaped by static properties such as texture and mineralogy and dynamic properties including water content, compaction, organic matter, and porosity. These dynamic properties including water content, compaction, organic matter, and porosity. These dynamic properties, significant to significant change during various farming operations can be adjusted with suitable soil and crop management strategies. Soil moisture content has a significant effect on the soil thermal conductivity. The relationship between soil moisture and thermal conductivity

1. Introduction
Water is the most crucial input for agricultural production. Globally, more than 80% of all freshwater used by humans are consumed in agriculture and most of it are for crop production (Morison et al., 2008). Currently about 60% of production in developing countries is derived from rainfall. Though irrigation provides only 10% of agricultural water use and covers just around 20% of the cropland, it can contribute about 40% of total food production since productivity of irrigated land is almost three times higher than that of rainfed land. The Food and Agriculture Organization (FAO) has predicted a net expansion of irrigated land of about 45 million is hectares in 93 developing countries (for a total of 242 million hectares in 2030). It projected that water withdrawals by the agriculture sector will increase by about 14% during 2000 – 2030 to meet the growing food demands (FAO, 2006). It is estimated that by 2050 in India, about 22 % of the geographic area and 17 % of the population will be under absolute water scarcity. The per capita availability of water which was about 1704 cubic meter in 2010 is projected to be 1235 cubic meter in 2050 (Anonymous, 2011). Infrastructure to increase the command area and minimize the gap of irrigation potential created and utilized is the dominant component of overall investment in agriculture (Anonymous, 2011). Besides this, judicious agricultural water management assists in ensuring good returns through efficient use of fertilizers and high yielding crop varieties. Above all, water will remain as a critical input for attaining sustainability in agricultural production. India’s current water supply is approximately 740 billion m3, which necessitates implementation of judicious water management technologies to enhance crop water productivity. In recent decades the world’s population has shown tremendous growth from an estimated 2.5 billion in the 1950’s to approximately 6.7 billion till date. It is expected that reduction in the average size of land holding, declining per capita water availability, deterioration of water quality etc. will seriously affect the sustainable use of water resources and will make it difficult to accomplish the target of producing 345 Mt of food grain in 2030 and 494 Mt in 2050 AD. To achieve the targeted food production, increase in the crop productivity from the present 2.3 to 4.0 t ha-1 under irrigated conditions and from 1.0 t ha-1 to 1.5 t ha-1 in rainfed area, productivity need to be increased at individual field level. This demands efficient use of water in agriculture, which can be achieved by reducing the losses of water and increasing the water uptake by the crops and it requires quantification of different water budgeting parameters like evapotranspiration and deep percolation.