eChapters

Introduction

The term geographic information systems (GIS) has come to mean, variously, an industry, a product, a technology, and a science. As such, the term invokes different perceptions dependent on whether the viewpoint is that of the software developer, the system marketer, the data provider, the application specialist, or the academic researcher, among others. A newcomer to the field is likely to be bewildered by the multiple uses of the same term, or, seen alternatively, different definitions of the same term. For instance some find it distasteful to use of the conventional acronym GIS and prefer Geospatial Technology. With all the variety of perceptions predicting the future of GIS is a cumbersome business. The most certain inference we can gain from the available trends is, it is growing and is poised for further growth. Geotechnology along with Nanotechnology and Biotechnology is considered as of the three most promising growth industries for the near future.

Introduction

The protected cultivation aims to create a favorable environment for harnessing maximum potential even in adverse climatic conditions. Farmers in India are facing different challenges including small and fragmented land holdings, climate change, vagaries of weather, poor soil health and lack of knowledge and exposure to modern agricultural technologies. The protected cultivation farming is emerging as one of the better alternatives in agriculture and gaining foothold in India. However, for successful protected cultivation farming, one needs to understand the protected cultivation structures, climate control, production technologies, plant protection, water management, marketing, guidelines and policies. At present, various innovations are adopted under the greenhouse technology viz., Soil based cultivation and soil less cultivation. Soil less cultivation consist of solid media based and liquid media based. Solid media include coco-peat, vermiculite, perlite, rice husk, sawdust, mass grass, wheat - paddy straw, sand, gravels, rock wool etc. whereas liquid based media include hydroponic, aeroponic and aquaponics cultivation.

15.1 Introduction

A tsunami is a series of waves created when a body of water, such as an ocean, is rapidly displaced. Earthquakes, mass movements above or below water, volcanic eruptions and other underwater explosions, landslides, large meteorite impacts and testing with nuclear weapons at sea all have the potential to generate a tsunami. The effects of a tsunami can range from unnoticeable to devastating. The term tsunami comes from the Japanese words meaning harbor (“tsu”,) and wave (“nami”,). The term is created by fishermen who returned to port to find the area surrounding their harbor devastated, although they had not been aware of any wave in the open water. Tsunamis are common throughout Japanese history; approximately 195 events in Japan have been recorded.

A tsunami has a much smaller amplitude offshore, and a very long wavelength (often hundreds of kilometers long), which is why they generally pass unnoticed at sea, forming only a passing “hump” in the ocean (Fig. 15.1). Tsunami have been historically referred to as tidal waves because as they approach land, they take on the characteristics of a violent onrushing tide rather than the sort of cresting waves that are formed by wind action upon the ocean (Iwan, W.D., 2006).

7.1 Tuple Introduction

A tuple is a collection which is order and unchangeable. In python tuples are written with round brackets. Tuples in python are very similar to list which contains different types of elements with the following major differences.

It is declared as

tuple1=(1,2,3,“ram”,“shyam”)

Program implementation import timeit

listtime=timeit.timeit(stmt=“[1,2,3,4,5,6,7,8,9]”,number=1000000)

tupletime=timeit.timeit(stmt=“(1,2,3,4,5,6,7,8,9)”,number=1000000)

print(?List takes time:”, listtime)

print(?Tuple takes time:”, tupletime)

The decreased ability of water to transmit light which is caused by suspended particulate matter ranging in size from colloidal to coarse dispersions is refers as turbidity.
Principle
Turbidity is measured by its effect on the transmission of light, which is termed as Turbidimetry or by its effect on the scattering of light, which is termed as Nephelometry. Turbidimeter can be used for sample with moderate turbidity and Nephelometer for samples with low Turbidity. Higher the intensity of scattered light higher the turbidity.
1 mg SiO2/L = 1 unit of turbidity

19.1 Python Turtle Graphics

Turtle is a special feathers of Python. Using Turtle, we can easily draw in a drawing board.

First we import the turtle module. Then create a window, next we create turtle object and using turtle method we can draw in the drawing board.

19.2 Some Turtle Method

Example

from turtle import *

t = Turtle() #object in python

wn=Screen()

wn.title(?my first graphic”)

wn.bgcolor(?yellow”) #color filling in window

t.shape(?turtle”) #turtle shape given

t.color(?red”, “green”)

Crops are grown in soil. There are different types of soil. The soil type helps farmers decide what crops will grow best because some crops do better with particular types of soil. Testing the soil helps determine what nutrients are available or unavailable for growing certain crops. Farmers usually have local agricultural experts test the soil on their land for information on how to proceed in growing crops. The best soil has a balance of nutrients, such as potassium, magnesium, and others. Certain crops may need more of one nutrient, so farmers put back those ingredients into the soil for better crops.

Six different types of soil are listed below along with the crops which do well in these soils.

1.Loam: This type of soil helps grow the best possible crops because it provides the necessary elements for plant growth and development. Loamy sand contains mostly sand plus clay and silt. Such soils are good for root vegetables, such as carrots, radish, turnip, beets, leafy vegetables, potatoes and tomatoes.

2.Clay: Cabbage and broccoli grow well in clay soil, but it is not good for root vegetables because of its dense texture which does not allow free flow of water.

3.Sand: Root vegetables, such as turnips, parsnips, and carrots, grow well in sandy soil.

4.Silt: Silty soil is fertile and offers nutrients for plant development. Lettuce, cabbage, carrots, turnips, and many other vegetables flourish in silt. Strawberries, raspberries, blackberries do well.

5.Peat: Peaty soil provides plant growth when mixed with rich organic matter, lime, and compost that reduces its acidity. Legumes, root crops, cabbage, and spinach are easily grown in soil that’s well-drained.

6.Chalk: Sweet corn, beets, spinach, and cabbage are among the vegetables that benefit from chalkier soil. It is recommended that farmers use fertilizers and balance the pH levels to deal with the alkaline that can sometimes stunt growth.

2.1. Types of plant diseases

2.1.1. Types of infection

1. Localized diseases

5.1. Types of farming

Arable: Crops.

Pastoral: Animals.

Mixed: Crops and animals.

Subsistence: Grown just for the farmer and his family

Commercial: Grown to sell.

Intensive: High inputs of labour or capital usually small.

Extensive: Low inputs of labour or capital.

Sedentary: Permanently in one place.

Nomadic: The farmers move around to find new areas to farm.

Classification of the farming systems based on following criteria

Available natural resources, include water, land, grazing areas and forest; climate especially altitude; landscape including slope; farm size, tenure and organization.

Dominant pattern of farm activities and household livelihoods, include field crops, livestock, trees, aquaculture, hunting and gathering, processing and off-farm activities.

2.1 Introduction

Farm ponds are the most commonly used source of ex-situ water harvesting structures. It has wide adaptability in farmers’ fields and used as handy source for water supply to crop fields. It has been used since time immemorial not only as an assured source of water supply to crops but also to meet demands in other sectors. However, these ponds have wide variations in shape and size as per the method of construction and their suitability for different topographic conditions. Most of the ponds, initially constructed in fields have regular shape. However, as time progresses and because of the poor or no repair and maintenance, these ponds loose their regular shape and become irregular.

Different types of greenhouses or protected structures are designed to meet the specific needs. They can be classified based on shape, utility, construction, cladding material, net houses and technology adopted.

A. Classification based on shape of greenhouse: Greenhouses can be classified based on their shape or style. For the purpose of classification, the uniqueness of the cross section of the greenhouses can be considered as a factor. As the longitudinal section tend to be approximately the same for all types, the longitudinal section of the greenhouse cannot be used for classification. The cross sections depict the width and height of the structure and the length is perpendicular to the plane of cross section. Also, the cross section provides information on the overall shape of the structural members, such as truss or hoop, which will be repeated on every day. The commonly followed types of greenhouse based on shape are lean-to, even span, uneven span, ridge and furrow, saw tooth and quonset.

Lean-to type greenhouse: A lean-to design is used when a greenhouse is placed against the side of an existing building. It is built against a building, using the existing structure for one or more of its sides. It is usually attached to a house, but may be attached to other buildings. The roof of the building is extended with appropriate greenhouse covering material and the area is properly enclosed. It is typically facing south side. The lean-to type greenhouse is limited to single or double-row plant benches with a total width of 7 to 12 feet. It can be as long as the building it is attached to. It should face the best direction for adequate sun exposure. The advantage of the lean-to type greenhouse is that, it usually is close to available electricity, water, and heat. It is a least expensive structure. This design makes the best use of sunlight and minimizes the requirement of roof supports. It has the following disadvantages:

Application of greenhouses in agriculture is mainly to modify microclimate for the production of crops with multiple objectives of raising crops in season offseason, round the year, early crops, late crops, breed crops, raise genetically engineered plants, seed production so and so forth. With hi-tech agriculture and modern techniques greenhouses are used for growing crops anywhere and everywhere, on soil under soil, water, under water and space. Greenhouses are mainly used for crop nursery production, crop production largely in vegetables, flowers and herbs. Among fruits mainly strawberry is grown under greehouses commercially. Other fruits can also be grown.

Besides crop production greenhouses are used for dehydration or drying of produce, seed production, for crop improvement using biotechnology and other sciences. Use of greenhouses in uncongenial environments for crop production is common in places like high altitudes, deserts, arctic climate and alike. One of the largest greenhouse complexes in the world is in Almería, Andalucía, Spain, where greenhouses cover almost 200 km2 (49,000 acres). One of the important use of greenhouses world over is raising tissue culture plants through a popularly known process hardening. For hardening of tissue culture plants different types of low and high technology greenhouses are must. Greenhouses in hot, dry climates used specifically to provide shade are sometimes called shade houses. Hydroponic crop production is generally done in greenhouses. Greenhouses are also used as retail market centres mainly for ornamental plants and seedlings and grafts of horticultural crops. Greenhouses are used for maintaining bee (honey bees and bumble bees) colonies as crop pollinators.

INTRODUCTION
Tyres serve as the essential contact points between your vehicle and the ground. Without tyres, the power generated by the engine would be ineffective in producing movement. This power transfer is known as traction, and the effectiveness of a tyre’s interaction with the surface significantly influences how much of the engine’s power can be utilized. Traction becomes even more critical when operating heavy machinery, particularly for farm and field applications. Tractors, for instance, are built for rugged and demanding conditions, requiring more traction compared to regular tubeless car tyres.
A tyre consists of a torus, made of a complex, flexible, reinforced composite material that surrounds a steel hub and is filled with air under pressure. The tyre’s rolling tread usually features expanded ribs. The design and shape of the torus, as well as the construction materials, are chosen based on the specific application of the tyre. Generally, a tyre is characterized by its construction type, mounting details, ply rating, and other key dimensions, as illustrated in relevant diagrams .

ABSTRACT

Fruits and vegetables are rich source of bioactive compounds such as polyphenols, antioxidants and flavonoids. Drying is one of the common methods for preservation of food and agricultural commodities. However, drying may negatively affect the product quality attributes. This article is a capsule overview of current state of art ultrasound (US) assisted drying on technical aspects and bioactivity of fruits and vegetables. US assisted drying is an economical and sustainable technique compared to other existing conventional techniques used for food processing and preservation. US as a pretreatment before drying of agricultural-products enhances drying efficiency, inactivate enzymes and improve overall quality of dried products. Current developments and available solutions in drying have shown that US assisted drying may be used to restrict the loss of crucial bioactive components occurring naturally in fruits and vegetables. US when combined with hot air drying helps in achieving adequate drying rate at lower temperatures and improves overall dehydration process. This technique has found no practical application commercially due to various difficulties in achieving high-intensity US in air. One practical benefit of using US assisted drying is the minimization of the drying time along with reduction in total energy consumption.

The cold chain is the lifeline of the ice cream industry because the product must remain continuously frozen from factory hardening until consumption. This chapter examines the complete cold-chain network, beginning with hardening and factory cold storage and extending through CFA or distributor cold rooms, refrigerated transport, retail freezers, and final consumer handling. It explains temperature requirements, monitoring systems, equipment selection, cold-room management, stock rotation, and quality assurance. Particular attention is given to Indian challenges such as power interruptions, inadequate freezer maintenance, poor retailer practices, and temperature abuse. The chapter demonstrates how disciplined cold-chain management protects texture, flavour, shape, overrun, shelf life, and ultimately consumer confidence

Artificial intelligence is becoming an important technology for transforming agricultural decision-making and farm management. This chapter introduces the fundamental concepts, tools, and applications of AI in agriculture. It explains how machine learning, deep learning, computer vision, predictive analytics, and intelligent systems can process large volumes of agricultural data. AI applications include crop monitoring, disease detection, yield prediction, precision input management, and automated decision-making. The chapter also discusses the major drivers of AI adoption, including increasing food demand, resource constraints, climate change, and labour shortages. Examples of AI-based agricultural applications demonstrate its potential to improve productivity, sustainability, resource efficiency, and resilience.

A drone is a sophisticated piece of technology made of many key components that work together to enable flight and various functions. The primary parts include the frame, which provides the structure and support for all other elements; the motors and propellers, which generate lift and control movement; the flight controller, acting as the brain of the drone, processing input from sensors and guiding the drone’s flight path; and the battery, which powers the system. Moreover, sensors like GPS, accelerometers, and gyroscopes are integral for stability and navigation. Many drones also feature cameras and other payloads for specific tasks, such as aerial photography, surveying, or surveillance. These components, working in harmony, allow the drone to perform a wide range of applications in industries like entertainment, agriculture, and delivery.
KEY COMPONENTS OF A DRONE
Agricultural drones consist of multiple components, including a remote controller, an aerial platform, and a spraying mechanism. They possess sensors, cameras, and more components to enhance crop management and productivity. Understanding the fundamental components is vital to understanding the potential of agricultural drones. This section delineates the essential components that render these drones viable instruments for contemporary agriculture.

Abstract

Dissolved Organic Carbon (DOC) consisting of water soluble organic molecules and by products of organic decomposition and chemical degradation processes, constitutes a critical link in carbon and nutrient cycles. The quality, or chemical and physical character, of DOC affects the degree to which it is transformed by biological and chemical processes. The significance of DOC was studied in layered coastal aquifers of the Pondicherry region during four different seasons. Pondicherry region has varied geological set up ranging from Cretaceous to Recent formations. A total of 52 groundwater samples were collected from various aquifers like Alluvium, Tertiary(Upper Cuddalore, Lower Cuddalore) and Cretaceous for two different seasons of pre- monsoon(PRM), and post-monsoon (POM). The samples were analyzed for major ions and DOC. The range of DOC in the study area is 0-14 mg/l. Very high DOC concentrations were measured during PRM in the samples from Alluvium and Lower Cuddalore Formation. The samples of these formations were compared with pH, Ionic strength, log pCO₂ and carbonate minerals concentration. The alluvial aquifer shows that pH governed dissolution along the coastal tracts and in Upper Cuddalore formation it’s based on interaction between aquifer matrix and groundwater.

Abstract

A study on colloids in groundwater and its relationship with the geochemical parameters is reasonably essential because of its facilitating nature to transport radionuclides in groundwater. Colloid sampling has been carried out in the coastal aquifers of southeast coast of India. Two different bore wells were selected based on the distance from the coast to collect groundwater samples. On the basis of the result achieved from this study, a reliable representation is emerging. The values of pH and EC are governed by the different size fraction of colloids. In this study, the relation between different size fractions of groundwater colloids and its pH, TDS and EC were carried out. These parameters were analyzed in the lab and its influence with four fractions of colloid like 1.2, 0.8, 0.45 and 0.22 µm have been discovered by smooth scatter plot. The accumulation of particles weighting by normal weighing instrument. There is an higher accumulation of particles found in Kalpakkam than Anupuram in all the size fractions. For separation of particles high frequency pressure was used by ultrasonic cleaner had been carried out. This method is very simple and more reasonable than any other methods.