eChapters

6.1 Introduction

In order to increase the production and productivity of crops, provision of irrigation system is highly essential. A project that makes use of weir or a barrage for providing irrigation to fields is called as direct irrigation system. On the other hand, a storage irrigation system makes use of storage reservoir by construction of dams. In order to provide irrigation by both the schemes, it is necessary to have a network of canal systems. A canal is an artificial channel, generally trapezoidal in shape constructed on the ground to carry water to the fields. The canal systems that provide water to the fields include main canals, branch canals, distributaries, minors and watercourses. It is imperative to design the canal systems properly for a certain realistic value of peak discharge that must pass through them so as to provide sufficient irrigation to the command areas. The flow irrigation that provides irrigation water to the fields may be of two types i.e. Inundation irrigation and Perennial irrigation.

9.1 Introduction

In order to increase the production and productivity of crops, provision of irrigation system is highly essential. A project that makes use of weir or a barrage for providing irrigation to fields is called as direct irrigation system. On the other hand, a storage irrigation system makes use of storage reservoir by construction of dams. In order to provide irrigation by both the schemes, it is necessary to have a network of canal systems. A canal is an artificial channel, generally trapezoidal in shape constructed on the ground to carry water to the fields. The canal systems that provide water to the fields include main canals, branch canals, distributaries, minors and watercourses. It is imperative to design the canal systems properly for a certain realistic value of peak discharge that must pass through them so as to provide sufficient irrigation to the command areas. The flow irrigation that provides irrigation water to the fields may be of two types i.e. Inundation irrigation and Perennial irrigation.

ABSTRACT

The improper disposal of food waste poses an environmental threat. The management of food waste in a sustainable way is always a challenge. Food waste is generated at various stages starting from food production till consumption. The cooked food waste generated due to various reasons leads not only to a loss of the food produced but also the water and energy used to cook it. This cooked food leftover can be served to the needy people or if not possible, can be processed further. This chapter focuses on various technological options for the management of cooked food waste in a sustainable way.

Keywords: Cooked food waste, Compost, Bokashi, Bio-surfactants, Environment

INTRODUCTION
In an internal combustion engine, fuel is combusted within the cylinder to generate power. During the power stroke, the temperature can reach up to 1600 ºC, which exceeds the melting point of engine components. The optimal operating temperature for internal combustion engines ranges between 140 ºF and 200 ºF, making cooling a crucial aspect of engine operation. It is estimated that approximately 40% of the total heat generated is released into the atmosphere through the exhaust, 30% is dissipated through the cooling system, and the remaining 30% is used to produce power.
The cooling system in internal combustion engines plays a vital role in ensuring the engine operates efficiently and reliably. It is responsible for maintaining the engine’s temperature within the optimal range, preventing overheating that can lead to engine damage. The engine generates substantial amounts of heat during combustion, and without proper cooling, these temperatures can rise to levels that exceed the melting point of engine components. This can result in engine failure, reduced performance, and significantly shortened engine life. The primary function of the cooling system is to absorb excess heat from the engine and dissipate it into the atmosphere, keeping the engine temperature within safe limits. This allows the engine to perform at its best while avoiding costly repairs and downtime.
The cooling system works by circulating coolant through the engine block, where it absorbs heat, and then transferring this heat to the radiator, where it is cooled by airflow or a fan. There are various types of cooling systems, including air-cooled and liquid-cooled systems, each offering distinct advantages depending on the engine’s design and application. Liquid cooling systems, which are more

Cooling systems play a vital role in cold chain logistics, serving as essential components that regulate temperature for storage, processing, and transportation. An efficient cooling system ensures that food and other perishable products remain fresh for extended periods, even before they begin their journey. Various cold chain products require specific temperature settings to maintain their quality and integrity until they reach their final destination.
For instance, tropical fruits such as bananas and pineapples must be stored at a consistent temperature between 12°C and 14°C. If the temperature exceeds this range, the fruits may ripen prematurely, compromising their quality. Likewise, food items like milk, vegetables, and other perishable fruits should be cooled within the range of 2°C to 4°C. This temperature effectively eliminates harmful pathogens and prevents bacterial growth, preserving the freshness of the produce.
For businesses dealing with frozen food, seafood, or ice cream, a more advanced cooling system is necessary—one that can maintain temperatures as low as -30°C. Such systems are essential to prevent thawing and spoilage, ensuring that frozen goods remain in optimal condition throughout their transportation and storage.

Coordinate Reference System (CRS) is a framework of coordinate based local, regional or global reference system used to represent the locations of geographic features. Coordinate Reference Systems (CRS) provide a standardized way to define the real-world geographic locations which further enable us to use common locations of geographic datasets for integration. The datasets from different sources and CRS are transformed to a common CRS in order to perform various integrated analytical operations like overlaying of data layers. Coordinate Reference Systems are mainly of two types:

1. Geographic Coordinate System: This is global or spherical coordinate system in which locations of features on earth are defined in terms of latitude and longitude values. Latitude and longitude are angles based on a point at the centre of the earth. In this system, locations are defined by degrees, therefore, distances cannot be measured accurately. The most common geographic coordinate system is the World Geodetic System 84 (WGS84).
2. Projected Coordinate System: In this system, locations of features are defined using cartesian x, y coordinates on a flat, two – dimensional surface. This system is based on sphere or ellipsoid projected on flat surface. Projected Coordinate System are generally referred as projec- tion. It is required for preparing maps on paper or computer screen. Un- like Geographic Coordinate System, projected coordinate system has ac- curate measurements of distance, angles and areas across the two dimen- sions. However, there is alwaystrade-offs between area, direction, shape, and distance in this system due to distortions created while representing ellipsoid or spheroid on a flat map. So, the projection type is selected based on its application. Most common projections are Universal Trans- verse Mercator (UTM), Lambert Conformal Conic and Albers Equal Area.

Correlation and regression are essential statistical tools for examining relationships among climate variables and agricultural responses. Correlation measures the strength and direction of association, while regression develops mathematical relationships for explanation and prediction. This chapter discusses their application to rainfall, temperature, humidity, evapotranspiration, crop growth and yield. It explains simple and multiple relationships, assumptions, interpretation, model fitting, predictive power and potential errors. These methods support crop-weather modelling, yield forecasting, climate-impact assessment and agricultural decision-making. By identifying how climatic variables influence biological and production processes, correlation and regression analysis help researchers generate reliable predictions and design more resilient and productive agricultural management strategies under changing environmental conditions.

12.1 Introduction

It is important to note that growing crops in a greenhouse requires a significant f inancial and administrative commitment. In order to ensure profitability, firms need to consider both cash flow and profitability. An enterprise budget can help address profitability potential by itemizing costs incurred across a typical production cycle. On the other hand, a cash flow budget is used to analyze the cash inflows and outflows of the enterprise over a fixed period of time.

There are different types of greenhouses, the low cost and high cost or low technology or high technology greenhouses. The cost of greenhouse and expenditure on crop production under these greenhouses would vary according to technology to be used and the crop is to be produced. The cost would vary from place to place with location of greenhouse. For each type of greenhouse its cost would vary according to geo-climate, the production practices and input expenditure/availability. The cost of construction of greenhouse in 2019 hence varies from Rupees 500 to 6000 per square meter.

Cost estimation is a critical step in the planning and implementation of conservation structures, providing a foundation for project approval, budgeting, and economic evaluation. For drop spillways—hydraulic structures used in soil and water conservation—the process involves calculating all expenses associated with materials, labor, and ancillary charges.
Drop spillways are engineered to safely transport excess runoff from higher elevations to lower ground levels, preventing erosion and structural degradation. Commonly used in agricultural watersheds, these structures play a vital role in controlling gully erosion, managing stormwater, and maintaining land productivity.
Accurate cost estimation includes:
• Quantifying construction materials such as concrete, masonry, reinforcement bars, and pipe outlets.
• Calculating labor costs based on the skilled and unskilled labor required for excavation, form, and structural assembly.
• Adding overhead charges, including land revenue, administrative costs, and potential audit expenses.
A detailed cost estimate ensures that the project remains within budget while meeting safety, durability, and environmental standards. It also aids in comparing alternatives and securing funding or approvals from governing agencies.
COMPONENTS OF A DROP SPILLWAY
Estimating the cost of different conservation structures involves analyzing both material and labor expenses specific to each type of structure. This process plays a vital role in project approval and economic assessment. It includes calculating material quantities, labor charges, and additional costs such as audit fees and land revenue.

Aim

To determine cost of operation of processing machineries with available data.

Total operation cost

For calculation of cost of operation of processing machineries, two types of cost viz., fixed cost and variable cost to be estimated.

5.1. Cost concepts

Cost refers to the money value of effort extended or sacrifice made in producing an article or rendering a service or achieving a specific purpose.

Expenses incurred in organizing and carrying out production process.

Includes outlays of funds for inputs and services.

Total costs: Money value of all inputs used in the production process.

3.1. Conventional farming

Refers to the use of synthetic chemical fertilizers, pesticides, herbicides and other continual inputs, genetically modified organisms, heavy irrigation, intensive tillage and concentrated monoculture production.

Highly resource and energy intensive, but also highly productive.

Conventional farming typically involves monocropping, but very expensive.

The manuscript was completed in February 2020. The book was supposed to be out in print form in April 2020. In between the pandemic changed the world. Obviously, world changing events can’t be left out of the book, particularly if the book is about the future of science, engineering, technology and humanity. I, therefore, requested the publisher of the book for the inclusion of a chapter COVID crisis and its impact on the future of the world. He readily agreed.

I am sincerely grateful to the publisher for allowing me to include issues relevant for the present book, as an additional chapter at the end of the book. The subject at the moment looks unending and it has so many dimensions. I have tried to cover them as briefly as possible, in the context of the book. In spite of the several difficulties due to this last minute inclusion the publisher has taken pains to include it. I am grateful to him for his gesture.

The pandemic of this proportion is expected to get the views/suggestions from equally large number of people. Everyone is eager to see the end of the pandemic. And everyone has realised that the world will be a much different place. Some people are hopeful that the problems will be resolved, of course using multi-dimensional approaches. Not many are sure of the time frame. There is also pessimism among common people. One of my aunt’s asks me - what kind of research we have been doing all these years that we can’t even face the challenges posed by a mere virus? Has the balloon of the technology busted by a miniscule virus? In this fluid time many questions are being asked, and as many answers are also emerging. It is a big issue. It is as big as that emerged after the Second World War. Some are calling it the ‘birth of a new power’.

2.1 Introduction
As time passes, the customers are used to the practice of having short life for the products, which they buy and use. This is because of the globalization of business and growing global competition all over the world. The companies engaged in manufacturing and selling the products which are used at large volume by households and partly by industries, introduce new models to attract customers and to have more market share. This in turn has impacts on customer buying and retention decisions of those products. Though the companies introduce new models, they are expected to keep the prices of the products at affordable ranges so that there is always a larger customer segment to buy those products. This is like egg or chicken situation, because companies introduce many new models to out beat competition and in turn customers expect improved versions of those models in shorter time intervals. This forces companies to continuously engage themselves to come out with new models or improved models which have convergence of technologies to give maximal customer satisfaction. So, creativity in product design becomes an essential requirement of the product development teams of the companies.
2.2 Product Design
Product design aims to include the following tasks to solve the problems of the users or address expected needs of customers in a given market. These tasks are human intensive.
i. Understanding end-users’ requirements
ii. Imagining alternate product ideas to address their needs

Drought is a recurrent feature of climate or climatic anomaly or weather related natural disaster. It occurs when the precipitation remains deficient over an extended period of time, usually for a season or more and affects water shortage in water bodies, streams, soil moisture, ground water etc. resulting into low crop production and economic performance of large regions or entire country. Drought occurs in virtually all regions varying its severity, low and high from regions to regions.

Introduction

Crop discrimination is the process of using remote-sensing technologies to identify and characterize different types of crops based on their electromagnetic behavior at different wavelengths. Each crop has a unique spectral signature that reflects its response to the incident radiation. However, the spectral signature can also vary depending on the season, the angle of the sensor, crop’s features, illumination intensity, weather phenomenon, and topography among other external factors (Parida et al., 2023).

ABSTRACT

Greenseeker is a handheld computer mounted sensor for observing normalized difference vegetation Index [NDVI= (NIR “R)/(NIR+R)], which may be used to estimate site specific amount of fertilizer nitrogen depending up on the crop condition. The sensor can be used for yield estimation and developing remote sensing based growth models. It is an active sensor with a built in light source for illuminating the target and records reflected light from vegetation at wavelength of 670 nm (red region) and 780 nm (near infrared region) of electromagnetic spectrum. The swath covered by the Sensor is 0.75 m when sensor is placed about 1.0 m above crop canopy.

The sensor was used to record NDVI in wheat- sugarcane intercropping system wherein wheat was grown on raised beds of 1.04 m width with six rows of wheat and sugarcane in furrows at row spacing of 1.38 m. The wheat variety PBW 343 was sown with nitrogen levels @ 0, 30, 60, 90, 120, 150, 180 and 210 kg N ha^-1 (all basal) and sugarcane variety CoSe 92423 was planted in furrows on 7^th November, 2006 in a medium textured loam soil.

The NDVI was recorded in wheat at 17, 41, 59, 73, 88, 113 and 129 DAS using Greenseeker and Spectroradiometer (UNISPEC ^TM of PP system, USA) simulating normal satellite bands i.e.

NIR: 770-860 nm, Red: 620-680 nm, Green: 520-580 nm. The maximum NDVI (recorded at 88 DAS) was used to develop INSEY “ yield relationship in wheat. The NDVI recorded by Greenseeker was integrated with NDVI recorded by Spectroradiometer.

The Greenseeker was also used to monitor crop growth in sugarcane. The NDVI was correlated with shoot population, plant height, LAI and total biomass during formative and crop elongation phase of sugarcane till end of November 2007. Highly significant (at 1%) correlation was observed between GS- NDVI and shoot population till mid August and LAI in sugarcane for entire crop cycle. An exponential model (R² = 0.9017) was developed to estimate LAI of sugarcane from NDVI. The NDVI was significantly (at 5 %) was correlated with plant height till mid August. However, the correlation between total crop biomass in sugarcane and NDVI remained non-significant.

Abstract

This paper portray the generation of spectral signature library for semi arid area crops using hyperspectral data and the scope of the application of the generated digital library for the classification of the satellite imagery of similar regions.

Hypersprctral data have narrow bands which help to provide additional information related to observed features. In case of this agriculture study crop related information are gathered using hyperspectral sensors The variation in the observations are due to physic-chemical characteristics such as biochemical composition, physical structure, water content and plant ecophysical status. Using the hand held spectroradiometer the reflectance is captured for the bajra, moong, moth crops from the Rajasthan, India’s semi arid region. The observations have been taken for different dates considering the phenology of the crops. Hyperion data from EO-1 satellite have been used to implement the classification operation based on the spectral signature library of bajra. It is observed that the image with the crops can be classified according to the phenology difference.