eChapters

Thermochemical conversion is a process that uses heat to transform biomass and agricultural waste into energy and valuable byproducts. This approach involves the decomposition of organic materials under high temperatures, with or without the presence of oxygen, to produce fuels, chemicals, and thermal energy. The key thermochemical methods include combustion, pyrolysis, gasification, torrefaction, and hydrothermal liquefaction (HTL). In the pursuit of sustainable energy and environmental protection, biomass has emerged as a vital renewable resource. Thermochemical conversion technologies have gained prominence due to their high efficiency, rapid processing rates, and ability to handle a wide range of feedstocks—including lignocellulosic and low-moisture materials. Unlike biological processes, which depend on microbial activity and require longer processing times, thermochemical methods offer faster and scalable solutions suitable for industrial applications. Each thermochemical pathway offers unique advantages and outputs. Combustion is the most widely used method, involving the burning of biomass in the presence of excess oxygen to generate heat. This heat can be used directly or converted into electricity, making combustion especially common in rural and semi-urban settings. Other methods like pyrolysis and gasification produce intermediate products such as bio-oil, syngas, and biochar, which can be further refined or utilized as fuels and soil amendments. Hydrothermal liquefaction and torrefaction operate under specific conditions to produce high-energy-density products and improve biomass handling and storage characteristics. Overall, thermochemical conversion presents a robust strategy for managing agricultural waste while contributing to renewable energy generation and circular economy goals.
Pyrolysis, Gasification, and Hydrothermal Processing
Pyrolysis is a thermochemical process that involves the decomposition of biomass by heating it in the absence of oxygen, typically at temperatures between 300°C and 700°C. This process converts organic material into three main products:
1. Bio-oil (liquid)
2. Syngas (gas)
3. Biochar (solid)

ABSTRACT

The food industry has many the environmental challenges in terms of emerging microbial strains, bacteria, viruses and accumulation of toxic chemicals. Ozone (O₃), environmental bluish gas is an extremely potent oxidant, which is effective solution for disinfection, sanitization for various kinds of products. The application of ozone treatment in agro processing has become green technology with increasing acceptance. It can apply in liquid form, gaseous form to sanitize food, food packaging materials, process water and to disinfect equipments. Ozone can be generated by different methods such as ultraviolet radiation method, corona discharge method etc. In this chapter, ozone properties, its generation, antimicrobial power and advantages with application of ozone has covered. Fruits and vegetables treatment with ozone have shown increased shelf-life and many hazardless advantages of the products. Some products preserved with ozone. Anti microbial activity, no residues in foods, assurance about preservation of sensory, nutritional and physicochemical properties of food have made ozone application as a promising technology for all kinds of food products

Packaging, hardening, storage, and shipping are essential final stages that protect ice cream quality after manufacturing. This chapter explains the role of packaging in protecting products from moisture loss, contamination, physical damage, and environmental exposure. It examines hardening technologies, including rapid-hardening systems, tunnels, spiral systems, and other industrial arrangements. The chapter also discusses bundling, shrink wrapping, palletizing, frozen storage, distribution models, and cold-chain requirements under Indian conditions. Temperature control throughout the distribution system is emphasized because fluctuations can cause recrystallization, texture deterioration, shrinkage, and other defects. The chapter provides practical guidance for maintaining product integrity from filling through storage and final delivery.

11.1 Introduction

Pandas is an open-source Python Library providing high-performance data manipulation and analysis tool using its powerful data structures. The name Pandas is derived from the word Panel Data - an Econometrics from Multidimensional data.

In 2008, developer Wes McKinney started developing pandas when in need of high performance, flexible tool for analysis of data.

Prior to Pandas, Python was majorly used for data munging and preparation. It had very little contribution towards data analysis. Pandas solved this problem. Using Pandas, we can accomplish five typical steps in the processing and analysis of data, regardless of the origin of data - load, prepare, manipulate, model, and analyze.

Python with Pandas is used in a wide range of fields including academic and commercial domains including finance, economics, Statistics, analytics, etc.

Aim: Perform the parallel operation of single-phase transformer and observe the load sharing of each transformer.

A power transformer is one of the most vital and an equally expensive component in a power system. It may so happen that, over time, due to load growth in its service area, an existing transformer may not be able to withstand the demand during peak-hours without exceeding its long-term MVA rating. Operating a transformer in such a fashion would cause overheating and degrade its expected life. In most cases, instead of commissioning an entirely new higher capacity unit, a more viable alternative exists in adding a smaller unit in parallel to complement the existing one. In other words, a new smaller capacity transformer can now be connected in parallel to the existing one such that the two shares a large peak load in a specific proportion and the one operating near limits is relieved of the burden.

Hypothesis testing enables researchers to determine whether apparent climatic or agricultural differences are statistically meaningful. Parametric tests are appropriate when data satisfy assumptions such as normality and homogeneity, whereas non-parametric tests are useful for irregular, ranked or non-normally distributed observations. This chapter discusses commonly used procedures, assumptions, selection criteria and interpretation. Applications include comparing weather conditions, evaluating crop responses, detecting rainfall or temperature trends and assessing environmental change. Methods such as t-tests, Mann-Whitney, Wilcoxon, Kruskal-Wallis and Mann-Kendall tests are relevant to agroclimatic research. Appropriate test selection improves analytical reliability and supports evidence-based decisions concerning climate variability, crop performance and agricultural adaptation.

Key words : Participatory GIS (P-GIS), Geo-Participatory Rural Appraisal (Geo-PRA) Social Mapping, Resource Mapping, Seasonality Maps, DGPS.

Participatory GIS

Geographical information System (GIS0 and Geographics Information Technologies (GITS) are no more restricted to the elite group of the society. Planners are busy in searching ways in merging community participation with GIS in the context of urban planning, environment equity, sustainable development etc. (Aitken and Michael, 1995, Craig and Ehwood, 1998; Talen, 2000 and Sieber, 2000). In all the cases, common thing is the linking of community participation and GIS in a diversity of social and environmental contexts. Through development, demonstration and modification of methodologies by academics and practitioners the concept of Participatory GIS (P-GIS) emerges. It is an outcome of a spontaneous fusion of participatory forms of development planning with modern information technologies. Experts gave considerable thoughts on the probing questions like whether a bottom up GIS could be successfully developed, how many community participation could be incorporated into GIS and to what context such participation would serve only to legitimize conventional top-down decision making. From these reflections only the concept of people’s participation GIS arose.

Participatory water management, principles of sustainable farming and crop water productivity and strategic water management practices
Participatory irrigation management
Farmers’ participation in management of water resources is one of the prime requirements to improve the irrigation efficiency and enhance food production to meet the future requirement. The objectives participatory irrigation management (PIM) are to achieve equity in water distribution, make best use of rain, surface and ground water conjunctively, develop community responsibility to collect water charges and create a sense of ownership of water resources and the irrigation system among the users so as to promote economy in water use and preservation of system, improve service deliveries through better operation and maintenance and achieve optimum utilization of available resources.
Participation of farmers in the realm or irrigation water management implies an active role of beneficiaries in all the facets of irrigation water management and its attendant linkages with the main system of management in agricultural/agronomic activities. This role is very different from the traditional passive role of farmers to look to the department for irrigation, for water supply and its distribution. The timing of farmers’ involvement is crucial. Farmers’ participation is most effective, when it takes place from initial stages of project planning, including the stage of project formulation. Such involvement forms part of ideal conditions for a partnership between farmers and government. The present theme “more crops per drop” is feasible provided the farmers are encouraged and supported to play an active role in the operation and management of the irrigation system. However, to operationalize this concept, there is a need to involve all the farmers within the command area, so that collective and collaborative action becomes possible.
Importance of Participatory Water Management
The per-capita availability of cultivable land as well as water is going to be stagnated, wherein irrigation is the only key factor leading to increased

Introduction

The thermal performance of a building refers to the process of modeling the energy transfer between a building and its surroundings. For a conditioned building, it estimates the heating and cooling load and hence, the sizing and selection of HVAC equipment can be correctly made. For a non-conditioned building, it calculates temperature variation inside the building over a specified time and helps one to estimate the duration of uncomfortable periods. These quantifications enable one to determine the effectiveness of the design of a building and help in evolving improved designs for realizing energy efficient buildings with comfortable indoor conditions. The lack of proper quantification is one of the reasons why passive solar architecture is not popular among architects. Clients would like to know how much energy might be saved, or the temperature reduced to justify any additional expense or design change. Architects too need to know the relative performance of buildings to choose a suitable alternative. Thus, knowledge of the methods of estimating the performance of buildings is essential to the design of passive solar buildings.

The modern or climate controlled greenhouse requires massive inputs of energy and cost of claddings to grow crops out of season making them high cost structures. However, growing of certain horticulture crops and their nurseries out of season is happening in a sustainable way, using the heat from the sun and soil too. These are called passive solar greenhouses designed to retain as much warmth as possible. This concept has revolutionized vegetable production in Ladakh, high altitudes and other parts of the country in winter months.

The solar greenhouse is especially successful in China and are contributing mainly in vegetable production. Solar passive greenhouses are designed in different shape size using different local and other materials keeping in view the local climate and terrain. The poly houses mentioned earlier such as, low cost polyhoses, Ladakhi poly house, solar trench, polyench are passive solar green houses. Being the opposite of the climate controlled greenhouse, the passive solar greenhouse is heated all-year round with solar energy alone, even when the outdoor temperature drops below freezing point. The indoor temperature of the structure can be higher than the outdoor temperature. The temperature can be around 25°C (45°F).

Such greenhouses have been experimented by Defence Research and Development Organization through its establishment FRL (Field Research Laboratory) now DIHAR (Defence Institute of High Altitude Research), Leh/ Ladakh since 1962 during November to the end of March, the period during which the outside temperature drops there below freezing. The average temperature in the coldest month is between -15°C and -18°C. Over the several decades of research different and effective designs of such greenhouses have been standardized which are suitable to produce fresh vegetables like most of the leafy vegetables, tomato, cole crops and potato at sub zero temperature.

Introduction

Military personnel’s are deployed for operation in adverse climatic conditions like desert, cold (arctic) and high altitude regions. Stressful and challenging living conditions have affected the outcome of many battles, campaigns and wars. Acclimatization to the environmental condition is a very essential stage of deployment. The time for acclimatization is restricted/limited for the effective operation towards the purpose of deployment. The performance of the military personnel in various deployed regions depends on the nutrition provided by the food consumed. The operational rations are designed to provide the essential nutrition to enhance their performance during training and/or operational situations.

Nutrition requirement of military personnel is different from that of the civilians. The nutrition requirement also varies with the kind (sedentary or continuous work) and region (plain, desert or high altitude) of deployment. The environmental stress caused by extreme heat, cold, etc. also influences the nutrient requirement/ intake. The insufficient dietary nutrient intake affects the immune function, pace of recovery from illness and injury and also the physical performance (Tharion et al., 2005).

The operational ration is also designed in such a way that it provides to the military personnel the required nutrition from the build in nutrition reserves during certain operational situations. Considering the vital criteria for nutritional requirement, the menu for the military personnel is designed. The chapter discusses the past, present and future of the army operational ration (AOR) in various countries of the world and the influence of advances in food processing methods in AOR menu.

9.1. Introduction

Human dependence on natural processes for the goods and services provided by nature, especially food, fuel and fibre, has been a known fact. In recent times, the value of less tangible services, such as climate control, water f iltration, and soil fertility, as well as recreational and cultural services has been emphasized also. Ecosystem services underpin human existence, health, and prosperity. It has been beneficial to humans through the transformations of resources (or environmental assets, including land, water, vegetation, and the atmosphere) into a flow of essential goods and services like clean air, water, and food (Costanza et al., 1997). Ecosystem services are those functions of ecosystems- including agroecosystems that are useful to humans or supportive of human well-being (Kremen, 2005). Services provided by ecosystems receive little notice for their support to human civilization often leading to poor management of the ecosystems. Land use systems influence ecosystem functions, which determine the supply of ecosystem services. Land and water resources are under considerable pressure from the expansion of cultivated and residential lands. Diverse land use in agrarian landscapes not only fosters biodiversity, but also provides potential ecosystem services such as air cleaning by vegetation, natural water filtration by plant roots, natural pest suppression, soil conservation, nutrient retention, and crop pollination by insects, etc. Lowland floodplains or waterlogged land areas are generally more conscious of the benefits provided by ecosystem services. It is important to create awareness among the people on provisioning services provided by ecosystems, such as crops, biofuel, fresh water, natural medicine, wildlife, and several cultural services. Managing ecosystem services, which link human well-being to conservation outcomes, is essential for achieving the sustainable development goals (SDGs) of the United Nations (Zhang, 2017).

Aim

To determine the efficiency of groundnut decorticator

Apparatus required

Manually operated groundnut decorticator

Weighing balance

Groundnut pods

Aim

To determine the effectiveness of inclined belt separator

To determine the capacity of inclined belt separator

Materials required

Inclined belt separator

Weighing balance

Feed material

Sample divider

Theory

Paddy parboiling is a hydrothermal process where the paddy is partially boiled to gelatinize the starch. During the gelatinization process the void of the rice kernel are filled and become hard on drying resulting minimum breakage and maximum head rice recovery. The nutrients are also absorbed into the inner mass and loss of nutrient is avoided. In general, the steps are involved in parboiling process are (i) Soaking (ii) Steaming (iii) Drying.

Aim

To evaluate the performance of the gravity separator.

Materials required

Specific gravity separator

Weighing balance

Sample divider

Stopwatch

Grains

Aim

To determine the effectiveness of the spiral separator.

Materials required

Spiral separator

Weighing balance

Sample divider

Stopwatch

Grain mixture (round and others)

Theory

Removal of outer sheath is called husking and removal of kernel from maize from maize cob is called shelling. The performance of the sheller is expressed in terms of capacity, percentage of unshelled kernels (corn) and percentage of breakage. The above terms are defined as:

Objectives
• Comprehend the fundamental concepts of personal and professional communication and their significance in various contexts.
• Develop an understanding of the key elements that contribute to effective verbal and non-verbal communication.
• Identify common barriers to communication and learn strategies toovercome them in personal and professional settings.
• Enhance personal communication skills, including active listening, empathy, assertiveness, and constructive feedback.
• Acquire professional communication skills essential for writing, verbal interactions, and presentations in the workplace.
• Understand the dynamics of communication in different professional contexts, including teamwork, cross-cultural communication, and conflict resolution.
What is Communication
Communication is the process of exchanging information, thoughts, ideas, and feelings between individuals or groups. It involves the sender, message, medium, receiver, and feedback. Types of communication include personal communication, which is informal a nd characterized by emotional and personal expression, and professional communication, which is formal and involves clear messaging that follows organizational protocols.

Introduction

Surging food demand and shrinking land resources to produce more from the limited natural resources like soil and water is poised to environmental degradation. Increased production must be achieved mainly by increasing crop productivity per unit area while sustaining the environment and enhanced input use efficiency. Agricultural production systems are increasingly under pressure to adapt decision-making process to be make more informed and efficient use of irrigation water, fertilizers and pesticides. Adverse effects of climate change are added challenges to agricultural productivity. Efficient crop management strategies to improve resource use efficiency and reduce crop losses are vital issues to be taken care for a sustainable sustainably enhanced production system. Genetic improvement approaches involving high throughput phenotyping and genomics-assisted breeding enhancing resource use efficiency, stress tolerance, yield has become imperative. Precise crop health monitoring is one of the keys to the modern production system. Obviously, disease forecasting and surveillance systems are in great demand to adopt precise management against the losses caused by diseases. Predicting disease risk at regional and global scales is of great interest for on-farm management and for assessment of agricultural policies and practices.

10.1. Classification of pesticides

10.1.1. Based on organisms

3.1. Paddy

3.1.1. Thrips: Stenchaetothrips biformis (Thripidae: Thysanoptera)

6.1. Cotton

6.1.1. Leafhopper: Amrasca devastans (Cicadellidae: Hemiptera)

5.1. Groundnut

5.1.1. Aphids - Aphis craccivora (Aphididae: Hemiptera)

4.1. Black gram, green gram, lablab and cowpea

4.1.1. Bean aphid: Aphis craccivora (Aphididae: Hemiptera)

1. Host range: Groundnut, redgram, peas, beans, safflower, lablab, niger

7.1. Early shoot borer: Chiloinfuscatellus snellen

1. Damage symptoms

2.1. Causes of pest outbreak

Activity of human beings which upsets biotic balance of ecosystem is prime cause for pest outbreak.

pH is defined as the negative logarithm of hydrogen ion concentration. The amount of the acidic gas CO2 significantly affects the pH of natural water body. Fish have usually blood pH levels of 7.4, but little deviation has been observed, perhaps 7.0 to 8.5pH range is more suitable for the growth and reproduction of the fish. However, pH range 4.0 to 6.5 and 9.0 to 11.0 cause fish death in water pH less than 4.0known as acidic death point or even more than 11.0 known as alkaline death point. The pH of fresh water more fluctuating as compare to sea water due to release and consumption of CO2 and O2 respectively by bacterial oxidation and respiration. However, the pH of marine water often constant at 7.8-8.3 due to presence of buffer like HCO3-, CO2 -, CO3-2 etc.
Principle
The estimation of hydrogen (H+) ion activity through sensing electrode. Electrode composed of a narrow glass bulb with fixed concentration of HCI solution inside it. A wire made of an Ag-AgCI placed in to the bulb which work as electrode to fix voltage. Potential difference forms between the solution in the glass bulb and the sample solution when the electrode immersed into solution.

Introduction

Agricultural produce are being sun dried since ages as the first step to preserve the product for future consumption. It is still practised being most inexpensive over mechanical and other advanced drying systems. The most prevailing disadvantage of open sun drying is the quality losses due to insect infestation, enzymatic reactions, microorganism growth, and mycotoxin development. On the other side, sun drying is also a highly labor intensive and time consuming process prone to theft and damage by birds. It also suffers with the lack of process control and treatment uniformity (Bansal and Garg 1987, Bansal, 1987).

To overcome these disadvantages several types of solar dryers have been developed over the years (Ekechukwu and Norton 1999). These dryer may be identified into three group namely active, passive and hybrid. As regards their structural arrangement three generic subclasses were also identified: direct-modes (the solar-energy collection unit is an integral part of the entire drying system), indirect-modes (the solar collector and the drying chamber are separate units) and mixed-modes solar dryers. Natural convection solar dryers have become more suitable for rural sector and remote areas, as they work on single energy option and do not require any other external energy source (Pangavhane et al. 2002).

Introduction

As the most of the conventional resources are depleting and can last only for about a few 30 to 50 years. Scientists worldwide are looking for alternative energy resources and they have come to an agreement that solar energy can provide much of our energy needs in the future. The major challenge before them is to store this energy. The radiation falling on the earth surface can be tapped and stored in no of ways. However, the most efficient way is done through the latent heat storage through PCM. The PCM has many added advantages i.e. high energy density, isothermal behavior, non-polluting and low cost. Nowadays, it gaining popularity worldwide and now seen as the most efficient way of thermal energy storage. There is a large number of PCM at use i.e. organic, inorganic, eutectic and salt hydrates. Their utilization depends on the user’s requirement technological constraints. They also serve the purpose of energy availability at night beside the uninterrupted supply during the day. They are seen as the materials for ensuring the environmental sustainability

4.1 Phases of technology transfer
To translate laboratory research into market ready product, it is important to understand steps or phases involved in this technology transfer process. The process typically includes six main phases, each with a different role (figure 9).
4.1.1 Research
Technology transfer begins with research, the critical stage of exploring and discovering novel knowledge, technologies, or innovations that may have potential commercial applications. The research phase can occur in academic institutions, research organizations, or private sector companies, often funded by public or private sources. Thorough research ensures that the technologies being transitioned are scientifically and technically robust, thereby increasing their potential for market success. Therefore, the research phase involves creating and evaluating new ideas, confirming their feasibility, and identifying IP prospects, all of which are key components of TT success.
4.1.2 Innovation disclosure
Innovation disclosure is the first formal step where the innovation is reported to the appropriate TTO or IP management team. This process ensures that the institution or organization recognizes the innovation and evaluates its potential for protection and commercialization. It includes following information:

Semiochemicals are chemical substances that mediate communication between organisms.

Classified into pheromones (intra specific semiochemicals) and allelochemicals (inter specific semiochemicals).

Phosphorus is essential for plant growth and is involved in important physiological processes, but its availability in soil is strongly influenced by soil chemical conditions. This chapter provides a systematic treatment of phosphorus management in irrigated soils. It begins with the functions of phosphorus and the classification of soil phosphorus into organic and inorganic forms. The behaviour of phosphorus in alkali soils is discussed along with phosphate fixation, which can substantially influence phosphorus availability to crops. The chapter examines the sources of soil phosphorus used by plants and the major types of phosphatic fertilizers used in agricultural production. Available and total phosphorus are distinguished, providing a basis for assessing soil phosphorus status. The behaviour of phosphate fertilizers after application is considered in relation to their efficiency and crop uptake. The residual value of phosphatic fertilizers is also discussed, highlighting the continuing contribution of applied phosphorus to subsequent crops. Overall, the chapter emphasizes efficient phosphorus management to improve nutrient availability, fertilizer-use efficiency and sustainable crop production in irrigated soils.

Physical Chemistry of Foods

    1.    Thermodynamics is primarily concerned with energy and entropy. Energy, also called internal energy (U), comprises heat and work; it is measured in joules (J).

    2.    Energy may be recalled that work generally equals force times distance (in N_·m = J) and that force equals mass times acceleration (in kg ·m· s^-2 = N).

    3.    According to the first law of thermodynamics, the quantity of energy, i.e., heat (q) work (p) potential energy, is always preserved.

    4.    Entropy (S)  is a measure of disorder; it is given by   
        S = K_B ln Ω
        Where K_B is the Boltzmann constant (1.38 ×10^-23 J × K^-1) and W is the number of  ways in which the system can be arranged, also called the number of degrees of freedom.

    5.    Colligative solution properties : The lowering of the chemical potential of a solvent by the presence of a solute causes changes in a number of physical properties: vapor pressure, boiling point, freezing point, osmotic pressure, etc. (the magnitudes of these changes all are proportional to the mole fraction of solute).

Abstract

The chapter aims at introducing selected physical properties of food and biological materials in food process and application in the field of food technology. These physical properties of food are not only used for designing of food equipments but can also maintain the nutritive value of food to a greater extent during processing in these equipments.

Introduction

The investigation of food engineering is spotlighted on the inspection of equipments and system used to process food materials on a commercial scale. Building of system for food materials can be efficient if two factors are known, the nature of the food product and what happen to the food during its processing. Food materials are organic in nature and it has a certain kind of qualities which recognize them from other processed food product. Since food materials are organic in nature, they have (a) shapes usually found in normally non regular; (b) properties which differ from other food products; (c) heterogeneous arrangement; (d) properties are varied due to climatic conditions, ripening conditions, etc. and (e) several other factors such as (e) influenced by chemical changes, moisture content variation and enzymatic movement. Managing food materials with these remarkable attributes requires extra thought, for the most part by implication and extra sources or reasons for different varieties. The attributes of a food material that are autonomous of the on looker, quantifiable, can be measured, and characterize the condition of the material (yet not how it accomplished that state) are considered as its physical properties.

Abstract

Physical properties of food are aspects such as colour, structure, texture, rheology and interfacial properties, and composition. We have a range of instrumental methods for objectively characterising and measuring food structure and physical properties. These are useful for applications such as new product development, benchmarking, reformulation and specification.

Colour

Consistent and accurate measurements of the colour and visual appearance of food products is extremely important. Various methods are available for colour measurement, allowing a wide variety of sample types to be measured. Colour measurement results are typically provided on the CIELAB scale. Others are available on request.

Abstract

Multi-commodity flours were prepared by blending rice flour, mung flour and potato flour with wheat flour in ratios of 0:0:0:100, 5:5:5:85, 10:10:10:70 and 15:15:15:55, respectively and packaged in glass jar, high density polyethylene and aluminium flexible packaging for biscuits development. The standardized formulations for biscuit had ingredients as 100 g flour/multi-commodity flour, 45 g sugar, 45 g hydrogenated fat, 1.25 g sodium bicarbonate, 1.25 g baking powder and 1.0 g curry leave powder. The biscuits were baked in convective baking oven at 180 > C for 10-15 min till baked. The well baked biscuits were removed from the oven, cooled to room temperature, packaged and stored under ambient condition. The physical quality (Mass, thickness, diameter, spread ration percent spread and bulk density), of biscuits were analyzed just after preparation under ambient condition. Results were also reported that the spread ratio of multi-commodity flour biscuits increased with decrease in the incorporation of wheat flour in multi-commodity flours. It is clear that spread ratio is mostly influenced by the diameter and thickness of biscuits.

2.1. Soil structure

Important physical properties of soils

Soil texture

Soil structure

Surface area

Soil density

Abstract

Fats and oils are one of the five essential ingredients of human diet and the others are protein, carbohydrates, minerals and vitamins. The oil seeds are major source of edible in world. Oils and fat form an important constituent of human food. Lipid metabolism generates many bioactive lipid molecules, which are fundamental mediators of multiple signaling pathways and they are also indispensable compounds of cell membranes. Many people in developing countries, especially children under five years of age suffer from acute or chronic protein and energy shortages. There is definitely a need for food production to keep pace with the increase in the number of the world’s population. Oilseed and nut should be properly dried before storage, and cleaned to remove sand, dust, leaves and other contaminants. All raw materials should be sorted to remove stones and moudly nuts. Some moulds, especially in the case of groundnuts, can cause aflatoxin poisoning.

Introduction

Oil has been a vital part of people’s regular dietary consumption all over the world and its usage has been found to increase several folds over the decades. The importance of using the appropriate oil for cooking goes a long way in affecting the consumer’s health. Improper methods of oil-aided cooking can lead to cardiovascular diseases and increased cholesterol in the blood (Kumar et al., 2018). There is definitely a need for food production to keep pace with the increase in the number of the world’s population. In order to achieve these national development strategies in many based economy tropical countries on agriculture and biased now towards increasing diversity of food products and consumer in order to alleviate malnutrition and pressure to strengthen and expand based industries on agriculture to ensure that their products are both healthy and safe. Oils and fats for food have used a variety of other applications since prehistoric times, and were easily isolate the source of the fats and oils found useful because of its unique properties.

Abstract

Four bread wheat varieties (PBW-138, PBW-299, PBW-343 and PBW-373), two of durum wheat (PDW-215 and PDW-233) and two of triticale (TL-419 and TL-1210) were milled to obtain 70 percent extraction flour.  The grains and the flour samples of all the varieties were evaluated for proximate composition, rheological properties and pretzel making. Physical properties of durum wheat were better followed by bread wheat and triticale. Durum wheat were harder, had higher grain weight than bread wheat and triticale.  Protein, ash, fat, total sugars and enzyme activity were higher in triticale flour than bread and durum wheat flours while durum flour had higher pigments (ppm, b-carotene). Bread wheat flour was intermediate between durum and triticale flours with respect to fineness. Rheological studies revealed triticale flour to be the weakest flour. Pretzels prepared by using optimized recipe and method revealed PBW-343 and PBW-373 best for pretzel making.

The physio-chemical properties of ice cream strongly influence its processing behaviour, texture, stability, and consumer acceptance. This chapter examines ice cream as a complex multiphase system and discusses important properties including overrun, density, viscosity, freezing behaviour, hardness, scoopability, meltdown, and fat destabilization. It explains how formulation and processing conditions influence these properties and how they relate to sensory quality. The chapter also considers quality-control tests used in industrial ice cream plants and identifies defects associated with physio-chemical imbalance. Understanding these relationships enables manufacturers to establish suitable product targets, diagnose quality problems, optimize formulations, and maintain consistency across different ice cream products.

4.1. Physiological disorders in field crops

Identification of physiological disorders in agricultural crops

Stress is force per unit area. When matter is subjected to stress; it may undergo changes in size, shape and displacement. Plants are grown in open environment and are likely to experience stress due to environmental conditions or when subjected to pests and diseases. The stress experienced by plants due to environmental conditions is called abiotic stresses. These include stresses caused by weather factors and climatic conditions and include moisture stress and thermal stress. The plants may also experience stress due to strong winds, dryness and as well as humid conditions (Fig.8.1).
The plants are generally classified into three types depending upon the ability to cope up with moisture stress as exhibited by-
• Drought resistance
• Drought tolerance
• Drought adaptations
The moisture stress may be to shortage of Water Compared to its requirements for evapotranspiration and metabolic activities. The plants may also suffer moisture

14.1 Introduction

The observation of phytosociology deals with the germination of growth on tree species in the industrial effluents. It shall be calculated germination potential based on germination capablility of the seeds. The growth parameters are measured then calculated leaf weight ratio, stem weight ratio, root weight ratio, top dry weight, sturdiness quatient, volume index and quality index. The following sub chapters dealing with formulae used to calculate the above parameters. The data so collected is then analyzed. The usual methods, which are employed in analysing the data, are averages, dispersion, skew ness, correlation, etc. The leaf weight ratio, stem weight ratio and root weight ratio are calculated by using the following formulae made by Kumaran (1991).

8.1 Introduction

In the modern world, the most elementary desire of every common man is to have sufficient food and mental peace. With the increasing world population, pressure on both peace and availability of food are continuously increasing. Advancing agricultural research can explore a possibility to feed to all living beings. Agricultural crops are highly susceptible to climatic conditions and crop productivity which are mainly influenced by extreme weather conditions; including temperature and water availability. In open field conditions, during long dry weather condition, soil moisture reduces and increases the transpiration.

Plants are very important to all forms of life on the earth because they consume carbon dioxide from the atmosphere and produce oxygen. In addition, plants make up the base of the food web. Basically, plants need five things in order to grow and these are: sunlight, proper temperature, moisture, air and nutrients. These five things should be provided by the natural or artificial environments where the plants live. If any of these elements are missing, they can limit plant growth. If any environmental factor is less than ideal, it limits the plant›s growth. People began putting plants indoor to avoid the damage from cold weather and this practice led to development of greenhouse. With the improvement in living standard and upgradation in agricultural technologies, off seasoned cultivation is also possible by providing desired artificial environmental conditions. The environmental stress weakens a plant and makes it more susceptible to disease or insect attack. In the modern engineering era, plant production systems have become more sophisticated. The desired climatic condition to grow plants and its control have changed from manual to automated digital operations and control computers have become faster and more capable.

Environmental control techniques are essential for protected cultivation and are not only for greenhouse’s cultivation but are also applicable to tissue culture and space farming as well. Environmental control in the present protected crop cultivation practices has been profusely supported by computer and sensor developments which is sometimes aslo called controlled environment agriculture.

Laboratory pipettes are classified by their method of liquid transfer. There are two types of pipette one is plastic which is made up of polystyrene and are essentially disposable and second one is glass pipettes are very resistant to chemicals. Glass pipette can be used frequently by washing, sterilising and dry heat sterilisation is also available. Some of the common types of pipettes are using in laboratory such as serological, volumetric, micropipettes, multichannel, and Pasteur pipettes. Serological and graduated pipettes are used for transferring various volumes, while micropipettes and volumetric types of pipettes are only considered for precise measurement and transfer. Multichannel pipettes are used for dispensing into multiple wells, and Pasteur pipettes are simple for transferring small amounts.
1. Serological Pipettes
• Also known as graduated pipettes, made of glass or transparent polystyrene they are calibrated with markings to measure and dispense varying volumes.
• Appropriate for cell culture applications, transferring liquids and mixing.
2. Multichannel Pipettes
• It is design to transfer multiple samples at once, often used for 96 well plates or pcr tubes.
• It can be manual or automated, with multiple heads for faster dispensing.
3. Volumetric Pipettes
• It is designed to supply for single and particular volume of liquid.
• Marked by single graduation for an exact volume, such as 1, 5, 10, 25, and 50 mL.
• Used in chemical reactions and analysis where accuracy is crucial.