eChapters

Digital image processing is the use of computer algorithms to perform image processing on digital images. As a subcategory or field of digital signal processing, digital image processing has many advantages over analog image processing. It allows a much wider range of algorithms to be applied to the input data and can avoid problems such as the buildup of noise and signal distortion during processing. Since images are defined over two dimensions (perhaps more) digital image processing may be modeled in the form of multidimensional systems. Introduction to image processing 
Image processing is a method to convert an image into digital form and perform some operations on it, in order to get an enhanced image or to extract some useful information from it. It is a type of signal dispensation in which input is image, like video frame or photograph and output may be image or characteristics associated with that image. Usually image processing system includes treating images as two dimensional signals while applying already set signal processing methods to them.
Image processing is a method to perform some operations on an image, in order to get an enhanced image or to extract some useful information from it. It is a type of signal processing in which input is an image and output may be image or characteristics/features associated with that image. Now-a-days, image processing is among rapidly growing technologies. It forms core research area within engineering and computer science disciplines too.

Introduction

Although both maps and aerial photos present a “bird’s-eye” view of the earth, aerial photographs are NOT maps. Maps are orthogonal representations of the earth’s surface, meaning that they are directionally and geometrically accurate (at least within the limitations imposed by projecting a 3-dimensional object onto 2 dimensions). Aerial photos, on the other hand, display a high degree of radial distortion. That is, the topography is distorted, and until corrections are made for the distortion, measurements made from a photograph are not accurate. Nevertheless, aerial photographs are a powerful tool for studying the earth’s environment. 

Because most GISs can correct for radial distortion, aerial photographs are an excellent data source for many types of projects, especially those that require spatial data from the same location at periodic intervals over a length of time. Typical applications include land use surveys and habitat analysis. 

This unit discusses benefits of aerial photography, applications, the different types of photography, and the integration of aerial photographs into GISs.

Introduction
Remote sensing is the art and science of recording, measuring, and analyzing information about a phenomenon from a distance. Humans with the aid of their eyes, noses, and ears are constantly seeing, smelling, and hearing things from a distance as they move through an environment. Thus, humans are naturally designed to be remote sensors. In order to study large areas of the Earth’s surface geographers use devices known as remote sensors. These sensors are mounted on platforms such as helicopters, planes, and satellites that make it possible for the sensors to observe the Earth from above.

Definition
Remote sensing can be defined as any process whereby information is gathered about an object, area or phenomenon without being in contact with it. Our eyes are an excellent example of a remote sensing device. We are able to gather information about our surroundings by gauging the amount and nature of the reflectance of visible light energy from some external source (such as the sun or a light bulb) as it reflects off objects in our field of view. Contrast this with a thermometer, which must be in contact with the phenomenon it measures, and thus is not a remote sensing device.

1. Tyson Foods Inc. 
2210 W. Oaklawn Drive, Springdale, AR 72762-6999 
Phone  : 479-290-4000; Fax  : 479-290-4061; Web site  : www.tyson.com

Executives : Chairman : John Tyson; Pres./CEO : Richard Bond; SVP-Intl. Ops. : Mike Baker; SVP-Commodity Trading & Risk Management : Jean Mrha Beach; Group VP-Research & Development, Logistics & Tech Services : Hal Carper; SVP & CIO : Gary Cooper; Group VP & International Pres. : Rick Greubel Jr.; SVP, Controller & CAO : Craig Hart; VP, Assoc. General Counsel & Secretary : R. Read Hudson; Group VP-Ops : Donnie King; SVP-Human Resources : Ken Kimbro; EVP & CFO : Dennis Leatherby; Group VP-Food Service : Bernard Leonard; Sr. Group VP-Fresh Meats : James Lochner; SVP-External Relations : Archie Shaffer III; Group VP-Consumer Prods : Donnie Smith; EVP & General Counsel : David Van Bebber; SVP-Renewable Products : Jeff Webster; VP-Investor Relations & Asst. Secretary : Ruth Ann Wisener

    1.    Cereals are grown over 73% of the total world harvested area and contribute over 60% of the world food production providing dietary fibre, proteins, energy, minerals,  vitamins, b-glucans , Oligosaccharides, such as lactulose, fructo-oligosaccharides, transgalacto-oligosaccharides

    2.    Finger millet is a potent source of antioxidants and has potent radical-scavenging activity that is higher than that of wheat, rice, and other millets; these results corresponded to their phenolic content

    3.    The brown or red variety of finger millet, which is commonly available, had higher activity (94%) than the white variety (4%) using the DPPH method.

    4.    Most of the herbal plant polyphenols are known to have multi functional properties such as reducing agents, hydrogen donating antioxidants and singlet oxygen quenchers and flavonoids and their derivatives are the largest and most important group of polyphenols.

    5.    Phytosterols are found in plant foods and are structurally and functionally analogous to cholesterol in vertebrate animals. a-sitosterol, campesterol and stigmasterol are the most commonly occurring phytosterols and constitute 95% of total phytosterols in the diet.

    1.    Wohler (1828) synthesized the first organic compound, urea from inorganic components.

    2.    Emil Fischer (1894) demonstrated the specificity of enzymes and the lock and key relationship between enzyme and substrate.

    3.    Michaelis and Menten (1913) developed kinetic theory of enzyme action

    4.    Watson and Crick (1953) Proposed the double-helical model for DNA structure

    5.    Ingo potrykus (1999) Golden rice- rich in b-carotene.

    6.    Glyoxysomes : Glyoxysomes are temporary in that they occur during transient periods in the life cycle of a plant such as in certain beans and nuts which store fats in their seeds as energy reserves. Glyoxysomes appear in the first few days after seed germination in endosperm cells and associate closely with lipid bodies. They disappear after the storage fats are broken down and converted into carbohydrate.

    1.    Control points are the points in the food processing chain where it is possible to control or remove hazards.

    2.    Critical control points are the control points in the processing chain where it is essential to a hazard, usually because there is no later step at which to establish control.

    3.    Preventative measures are the actions and activities needed to remove hazards or control them by reducing them to acceptable levels.

    4.    Critical limits for critical control points are measurements such as temperature and time, that must be met, or characteristics such as appearance and texture. Critical limits need to be validated.

    5.    Monitoring is the regular measurement or observation of a critical control point to ensure it is not beyond its critical limits.

    6.    Take corrective action to bring the process back under control before the problem (‘deviation’) leads to a safety hazard. Consider proper management (disposition) of any adversely affected product.

    7.    Verification procedures are tests and programmes that make sure the HACCP system working properly

    8.    Record keeping and documentation systems must meet the needs of the business and be adequate to show that the food safety programme is working.

Food Safety and Standards Rules and Regulations-2009

    1.    The Food Safety and Standards Act, 2006 has been passed by the Parliament with the intention to integrate all present food laws into one and to have a single regulatory body.

    2.    Accordingly the Food Safety and Standards Authority of India (FSSAI) has been established under the Food Safety and Standards Act, 2006 (FSS Act, 2006) with the mandate to lay down science based standards for articles of food and to regulate their manufacture, storage, distribution, sale and import, to ensure availability of safe and wholesome food for human consumption.

    3.    In exercise of the powers conferred by section 91 of the Food Safety and Standards Act, 2006 (34 of 2006), the Central Government hereby makes the rules and regulations.

    4.    ‘‘Anti-oxidant’’ means a substance which when added to food retards or prevents oxidative deterioration of food and does not include sugar, cereal, oils, flours, herbs and spices.

1. Food Labelling

Food labelling is the primary means of communication between the producer and seller of food on one hand, and the purchaser and consumer on the other.

Basic Terminology in Food labelling

‘‘Food” means any substance, whether processed, semi-processed or raw, which is intended for human consumption, and includes drinks, chewing gum and any substance which has been used in the manufacture, preparation or treatment of “food” but does not include cosmetics or tobacco or substances used only as drugs.

‘‘Ingredient” means any substance, including a food additive, used in the manufacture or preparation of a food and present in the final product although possibly in a modified form.

Hazard Analysis and Critical Control Point (HACCP) System

1. Identify hazards
 
 It is important to be able to identify the possible microbiological, chemical and physical hazards that can occur at every stage of the food business – from growth, processing, manufacture, storage and distribution, until the point where it is sold to the customer and eaten.

    ·    Microbiological Hazards : Any bacterium, virus, or protozoan that is capable of causing illness and that grows or may be carried on food. Well-known examples of bacteria are Campylobacter, Listeria and Salmonella. The most likely food-borne viruses are the Norwalk type viruses. Giardia is an example of a protozoan that may be food borne. It is important to have some understanding of the risks associated with different types of microbiological hazards.

    ·    Chemical Hazards : Examples include excessive or toxic amounts of heavy metals, chemicals, pesticides, herbicides, insecticides, vitamins, minerals, preservatives, disinfectants, detergents and cleaning compounds. Some hazards may be naturally present such as in green potatoes or taro and rhubarb leaves.

    ·    Physical Hazards : Objects that get into food, or are already present in food, may cause illness, injury or distress to the person eating it. Some examples are glass, metal fragments etc. Other contaminants such as hair or insects may be offensive but not necessarily a danger to health. They should nonetheless be considered and controlled

1. The Stability and Shelf-Life of Food

    1.    In the UK, the date coding to be used is determined by the total life of the product: for microbiologically highly perishable foods, a ‘use by’ date is needed, while for other foods, including foods with more than 18 months’ shelf-life, a ‘best before’ or a ‘best before end’ date is needed.

    2.    IFT (1974) definition of shelf-life, is : The period between manufacture and retail purchase of a food product during which the product is of satisfactory quality.

    3.    Shelf-life is defined as the time during which the food product will :

        i.    remain safe;
        ii.    be certain to retain desired sensory, chemical, physical and 
    microbiological characteristics;
        iii.    comply with any label declaration of nutritional data,

    1.    Water activity (a_w) affects food chemistry and can be controlled by removal (dehydration or drying) or by chemically binding the water, reducing its activity. Water activity in foods ranges from 0.95 to 1.00 in fresh meats and vegetables to 0.20 in dried milk.

    2.    Water activity (a_w) may be defined in a number of ways, qualitatively, aw is a measure of unbound, free water in a system available to support biological and chemical reactions.

    3.    Water activity, not absolute water content, is what bacteria, enzymes, and chemical reactants encounter and is affected by at the micro environmental level in food materials.

    4.    Two foods with the same water content can have very different aw values depending upon the degree to which the water is free or otherwise bound to food constituents.

    5.    The term “water activity” is related to relative humidity. Relative humidity is defined as the ratio of the partial pressure of water vapour in the air to the vapour pressure of pure water at the same temperature.

    6.    Water activity or aw is a property of solutions and is the ratio of vapour pressure of the solution compared with the vapour pressure of pure water at the same temperature. Under equilibrium conditions water activity equals:

Food and Industrial Microbiology

    1.    Microbiology often has been defined as the study of organisms and agents too small to be seen clearly by the unaided eye—that is, the study of microorganisms

    2.    Two bacteria that are visible without a microscope, Thiomargarita and Epulopiscium.

    3.    Procaryotic cells [Greek pro, before, and karyon, nut or kernel; organism with a primordial nucleus] have a much simpler morphology than eucaryotic cells and lack a true membrane-delimited nucleus. All bacteria are procaryotic.

    4.    Eukaryotic cells [Greek eu, true, and karyon, nut or kernel] have a membrane- enclosed nucleus; they are more complex morphologically and are usually larger than procaryotes. Algae, fungi, protozoa, higher plants, and animals are eucaryotic.

    5.    The ordinary microscope is called a bright-field microscope because it forms a dark image against a brighter background

Food Packaging

    1.    Food packaging : A wrap, pouch, bag, box, cup, tray, can, tube, bottle and jar are some of the many forms of packaging that contain food products. It must contain a food product as well as protect and preserve it for a specific length of time. Each package must, by law, display product information for the consumer.

    2.    Low Density Polyethylene (LDPE) is an economical material with low WVTR; however, it has high permeabilities to flavours/volatiles, poor grease resistance and are limp.
 
    3.    High-Density Polyethylene (HDPE) is stiffer, more translucent and has better barrier properties but needs higher temperature for sealing.

    4.    A copolymer of polyethylene and poly vinyl alcohol, and EVOH has outstanding gas barrier properties especially when dry.

    5.    High-density polyethylene is stiff, strong, tough, resistant to chemicals and moisture, permeable to gas, easy to process, and easy to form. It is used to make bottles for milk, juice, and water; cereal box liners; margarine tubs; and grocery, trash, and retail bags.

    6.    Low-density polyethylene is flexible, strong, tough, easy to seal, and resistant to moisture. Because low-density polyethylene is relatively transparent, it is predominately used in film applications and in applications where heat sealing is necessary. Bread and frozen food bags, flexible lids, and squeezable food bottles are examples of low-density polyethylene.

Instructions for establishment registration and processing, filing for acidified and low-acid canned foods

Acid Food
 
A food that has a natural pH of 4.6 or below.
 
Acidified Food
 
A low-acid food to which acid(s) or acid food(s) are added and which has a finished equilibrium pH of 4.6 or below and a water activity (aw) greater than 0.85.
 
Authorized Company Representative
 
The person authorized by the company to sign the registration and process filing forms on its behalf. That person should possess the knowledge necessary to answer technical questions concerning filed processes.

1. Fundamental Concepts of Unit Operations

    1.    Process is the set of activities or industrial operations that modify the properties of raw materials with the purpose of obtaining products to satisfy the needs of a society.

    2.    Food process engineering includes the part of human activity in which the knowledge of physical, natural, and economic sciences is applied to agricultural products as related to their composition, energetic content, or physical state.

    3.    Food process engineering can also be defined as “the science of conceiving, calculating, designing, building, and running the facilities where the transformation processes of agricultural products, at the industrial level and as economically as possible, are carried out.

    4.    In a discontinuous operation the raw material is loaded in the equipment; after performing the required transformation, the obtained products are unloaded. These operations, also called “batch” or “intermittent,” are carried out in steps:

    1.    Microbial Risk Assessment (MRA) can be considered a tool for use in the management of the risks posed by food borne pathogens and in the elaboration of standards for food in international trade.

    2.    MRA comprises risk assessments of particular pathogen - commodity combinations

    3.    According to codex alimentarious commission (CAC) microbial risk assessment is defined as a scientifically based process consisting of 4 components.

        ·    Hazard identification
        ·    Exposure assessment
        ·    Hazard characterization
        ·    Risk characterization

Storage Systems

    1.    Low cost storage technology

        ·    In situ : Means delaying the harvest until the crop is required and employed 
    for the root crops.
        ·    Sand and Coir : Used for the Potatoes
        ·    Pits used for the Potatoes
        ·    Clamps used for the Potatoes
             Wind breaks used for the Onions – 6 months 1m height wooden stakes
        ·    Cellars : under ground / partly under ground. Ex: Apples, cabbage, 
    onions and potatoes during winter.
        ·    Barns : In Sudan onions are stored in palm leaf barns called “Rakubas”.
        ·    Evaporative Coolers
        ·    Zero energy cooling chambers
        ·    Night ventilation.

    2.    As a general rule, air circulation of storage room is designed to provide about 25m² / min / 3000 K cal of refrigeration predicated on a 5.5ºC

    3.    Frozen storage refers to storage at temperature where food is maintained in frozen conditions.

    4.    Good frozen storage generally means - 18ºC / below.

    5.    Below – 9.4ºC, there is no significant growth of microorganisms in food.

    1.    Food : defined as something which is eaten / drunk by human beings or something we eat and which can be utilized by our body.

    2.    Milk and milk products like Dahi, yoghurt, paneer, cheese, Khoa etc these foods are rich sources of Vitamin A, Riboflavin and Calcium.

    3.    Meat, fish, poultry etc besides proteins these foods also provide Iron and B- complex Vitamins.

    4.    Eggs and egg products are also rich in Iron, Vitamin A and Riboflavin (B1).

    5.    Pulses, nuts and oil seeds are also a good source of thiamin, niacin, and Iron.

    6.    Strategies and measures for alleviating the world food problem require.

Food Processing Technology

    1.    The transition from solid to fluid and back is known as a phase transition and this is important in many types of food processing (e.g. water to water vapour in evaporation and distillation and dehydration; water to ice in freezing and freeze drying or freeze concentration or crystallisation of fats.
 
    2.    Phase transition takes place isothermally at the phase transition temperature by release or absorption of latent heat, and can be represented by a phase diagram.

    3.    A second type of transition, known as glass transition, takes place without the release or absorption of latent heat and involves the transition of a food to an amorphous glass state at its glass transition temperature.

    4.    The transition is dependent on the temperature of the food, time, and the moisture content of the food.

    5.    The density of a material is equal to its mass divided by its volume and has units of kgm^-3

    1.    Vegetables are less acidic than fruits and food poisoning bacteria are able to grow in many vegetable products

    2.    Different levels of acidity in fruits

    3.    Water for cleaning of fruits and vegetables should contain about 200 ppm of chlorine (by mixing 1 litre of bleach into 250 litres of water)

    4.    Water that is used as an ingredient in fruits and vegetable product should not contain more than 0.5 ppm chlorine (by adding 2.5 ml of bleach to 250 litres of water), to avoid contaminating products with a chlorine smell

1. Herbs and Spices
       
    1.    International Standards Organization (ISO) defines spices and condiments as: Vegetable products or mixtures thereof, free from extraneous matter, used for flavouring, seasoning and imparting aroma in foods.

    2.    Rosengarten describes a spice as a product which enriches or alters the quality of a thing, for example altering the taste of a food to give it zest or pungency; a piquant or lasting flavouring; or a relish. The term ‘spice’ is thus used to cover the use of spices, herbs and certain aromatic vegetables to impart odour and flavour to foods.

    3.    Herbs may be defined as the dried leaves of aromatic plants used to impart flavour and odour to foods with, sometimes, the addition of colour. The leaves are commonly traded separately from the plant stems and leaf stalks.

Nutraceuticals and Health Foods

    1.    According to the International Food Information Council (IFIC), functional foods are “foods or dietary components that may provide a health benefit beyond basic nutrition.”

    2.    Nutraceuticals : A product isolated and purified from foods that is generally- sold in medicinal forms are usually associated with food. A nutraceutical is demonstrated to have a physiological benefit or provide protection against chronic disease (Coined originally by Stephen DeFelice in 1989, founder and chairman of the Foundation for Innovation in Medicine, USA).

    3.    The International Life Sciences Institute of North America (ILSI) has defined functional foods as “foods that by virtue of physiologically active food components provide health benefits beyond basic nutrition

    4.    Health Canada defines functional foods as “similar in appearance to a conventional food, consumed as part of the usual diet, with demonstrated physiological benefits, and/or to reduce the risk of chronic disease beyond basic nutritional functions.”

    1.    The heifer is bred (naturally or by insemination) before the age of two years.

    2.    The gestation period is nine months and one week.

    3.    After calving, the cow gives milk for 10 months.

    4.    1 – 2 months after calving the cow will again be bred.

    5.    The cow then continues to give milk for about 300 days. This period is known as lactation.

    6.    Milk should preferably be handled in a closed system, to minimise the risk of contamination. It must be cooled to 4 °C as soon as it is produced.

    7.    The content of protein, lactose and ash is somewhat higher in buffalo milk than in cow milk. Buffalo milk contains vitamin A, but lacks b-carotene, which is present in cow’s milk.

    8.    When milk and cream turn to butter, there is a phase inversion from an oil-in-water emulsion to a water-in-oil emulsion.

    9.    In milk, the whey proteins are in colloidal solution and the casein in colloidal suspension.

Meat and Meat Products

    1.    Meat can be defined as “the muscle tissue of slaughter animals”.
    2.    meat is composed of water, fat, protein, minerals and a small proportion of carbohydrate

Cereal Processing

    1.    The protein content of wheat grain varies widely, but for bread making a value of at least 11% is required.

    2.    Low grain sulphur will result in low concentrations of the sulphur-containing amino acids, cystine and methionine, and may result in poor loaf volume.

    3.    During seed germination endosperm starch is converted into soluble glucose and maltose to support the developing embryo. This is brought about by enzymatic activity, especially the enzyme a-amylase.

    4.    Excessive a-amylase levels result in the formation of a darkened loaf crust as a result of sugar caramelization and a sticky crumb structure which can cause problems during slicing.

    5.    Wheat with a protein level below 10% is preferred to reduce gluten elasticity.

    6.    There is a very good correlation between grain nitrogen and the amount of malt extract achieved, low grain nitrogen giving more fermentable extract

    7.    The term ‘coarse grains milling’ is a very broad one that refers to the comminution of the berries of the wheat, barley and other coarse grain crops.

Moisture Content
 
Two maximum moisture levels are provided to meet different climatic conditions and marketing practices. Lower values in the first column are suggested for countries with tropical climates or when long-term (more than one crop year) storage is a normal commercial practice. The values in the second column are suggested for more moderate climates or when other short term storage is the normal commercial practice.

Introduction

    1.    Food Science is the application of the physical, biological and behavioral science to the processing and marketing of foods (Margaret, 1968).

    2.    Technology can be defined as the science dealing with knowledge of doing things efficiently and effectively.

    3.    Food science helps us understand the theory example: what methods can best be used to store and preserve food to maintain quality and prevent spoilage.

    4.    Food technology demonstrates how the food is stored, preserved, processed and transported and has been responsible for development of new techniques for processing and preservation of food on a commercial scale and for packaging it in such a way that it can be sold conveniently.

    5.    Food science deals with the study of facts of the physical, chemical and biological sciences as they influence the processing and preservation of food.

    6.    Food technology deals with engineering and other scientific and technical problems involved in transforming edible raw materials and other ingredients into safe, nutritious and appetizing food products (Desrosier, 1977).

    7.    Food science is concerned with basic scientific facts about food, where as food technology concerned with the processing of raw materials into foods that meet human needs and wants.

    8.    Indian agriculture has undergone a sea change during the past half a century. Starting with the campaign for “grow more foods” in the forties, India reached self sufficiency during the eighties.

Instrumentation and Advanced Analytical Techniques

    1.    Chromatography is defined as an analytical technique where by a mixture of chemicals may be separated by virtue of their differential affinities for two immiscible phases. One of these, the stationary phase, consists of a fixed bed of small particles with a large surface area, while the other, the mobile phase or “eluant”, is a fluid that moves constantly through, or over the surface of, the fixed phase.

    2.    The chromatogram evaluated qualitatively by determining the Rf or retention factor, for each of the eluted substances.

    3.    The Rf is a measure of that fraction of its total elution time that any compound spends in the mobile phase.

    4.    If the liquid phase is a polar substance (e.g. polyethylene glycol) and the mobile phase is non polar, the process is termed normal-phase chromatography

    5.    When the stationary phase is non polar (e.g. octadecylsilane) and the mobile phase is polar, the process is reversed-phase chromatography

    6.    The chromatographic separation of mixtures of large molecules such as proteins may be accomplished by a mechanism called size exclusion chromatography or gel permeation chromatography.

    7.    Separation of certain molecules is accomplished by a mechanism called affinity Chromatography in which specific binding between an antibody (stationary phase) and antigen (analyte) occur.

1. Guidelines on Analytical Terminology

    1.    Accuracy : The closeness of agreement between a test result or measurement result and a reference value.

    2.    Analyte : The chemical substance sought or determined in a sample. This definition does not apply to molecular biological analytical methods.

    3.    Applicability : The analytes, matrices, and concentrations for which a method of analysis may be used satisfactorily.

    4.    Bias : The difference between the expectation of the test result or measurement result and the true value. In practice conventional quantity value can be substituted for true value.

    5.    The bias of a measuring instrument is normally estimated by averaging the error of indication over the appropriate number of repeated measurements. The error of indication is the: “indication of a measuring instrument minus a true value of the corresponding input quantity”.

    6.    Calibration : Operation that, under specified conditions, in a first step, establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and in a second step uses this information to establish a relation for obtaining a measurement result from an indication.

    7.    Certified reference material (CRM) : Reference material accompanied by documentation issued by an authoritative body and providing one or more specified property values with associated uncertainties and traceability, using valid procedures.

Physical Chemistry of Foods

    1.    Thermodynamics is primarily concerned with energy and entropy. Energy, also called internal energy (U), comprises heat and work; it is measured in joules (J).

    2.    Energy may be recalled that work generally equals force times distance (in N_·m = J) and that force equals mass times acceleration (in kg ·m· s^-2 = N).

    3.    According to the first law of thermodynamics, the quantity of energy, i.e., heat (q) work (p) potential energy, is always preserved.

    4.    Entropy (S)  is a measure of disorder; it is given by   
        S = K_B ln Ω
        Where K_B is the Boltzmann constant (1.38 ×10^-23 J × K^-1) and W is the number of  ways in which the system can be arranged, also called the number of degrees of freedom.

    5.    Colligative solution properties : The lowering of the chemical potential of a solvent by the presence of a solute causes changes in a number of physical properties: vapor pressure, boiling point, freezing point, osmotic pressure, etc. (the magnitudes of these changes all are proportional to the mole fraction of solute).

Percent Solutions

There are three types of percent solutions. All are parts of solute per 100 total parts of solution. Based on the following definitions you may calculate the concentration of a solution or calculate how to make up a specific concentration

    1.    % W/W - Percent of weight of solute in the total weight of the solution. Percent here is the number of grams of solute in 100 grams of solution. 
        Example: 
        A 100% (W/W) NaCl solution is made by weighing 100 g NaCl and dissolving in 100 g of solution

    2.    % W/V - Percent of weight of solution in the total volume of solution. Percent here is the number of grams of solute in 100 ml of solution. This is probably the least significant way of naming a solution, but the most common way of doing it. In fact, any percent solution not stipulated as W/W, W/V, or V/V is assumed to be % W/V. 
        Example : A 4% (W/V) NaCl solution is 4 g of NaCl in 100 ml of solution.

    3.    % V/V - Percent of volume of solute in the total volume of solution %V/V. Percent here is the number of milliliters of solute in 100 ml of solution. 
        Example: A 10% (V/V) ethanol solution is 10 ml of ethanol in 100 ml of solution; unless otherwise stated, water is the solvent. 

    1.    Absorbance (A) - Defined as –log (1-a) = log (1/t), where ‘a’ is the absorbance and‘t’ the transmittance of a medium through which a light beam passes.

    2.    Absorption coefficient (a) - The relative decrease in the intensity of a collimated beam of electromagnetic radiation, as a result of absorption by a medium, during traversal of an infinitesimal layer of the medium, divided by the length traversed.

    3.    Acceleration due to gravity (g) - The standard value (9.80665 m/s2) of the acceleration experienced by a body in the earth’s gravitational field.

    4.    Acid - Historically, a substance that yields an H+ ion when it dissociates in solution, resulting in a pH< 7. In the Brönsted definition, an acid is a substance that donates a proton in any type of reaction. The most general definition, due to G.N. Lewis, classifies any chemical species capable of accepting an electron pair as an acid.

    5.    Acid dissociation constant (Ka) - The equilibrium constant for the dissociation of an acid HA through the reaction HA + H2O1 A- + H3O+. The quantity pKa = -log Ka is often used to express the acid dissociation constant

    6.    Acyl groups - Groups formed by removing the hydroxy groups from oxoacids that have the general structure RC (=O) (OH) and replacement analogues of such acyl groups.

    7.    Adiabatic process - A thermodynamic process in which no heat enters or leaves the system.

    1.    Nutrients : Chemical substances obtained from food and used in the body to provide energy, structural materials, and regulating agents to support growth, maintenance, and repair of the body’s tissues. Nutrients may also reduce the risks of some diseases.
    2.    Carbohydrate, fat, and protein are sometimes called macronutrients because the body requires them in relatively large amounts (many grams daily). In contrast, vitamins and minerals are micronutrients, required only in small amounts (milligrams or micrograms daily).
    3.    The international unit for measuring food energy is the joule, a measure of work energy. To convert kcalories to kilojoules, multiply by 4.2; to convert kilojoules to kcalories, multiply by 0.24.
    4.    Essential nutrients : Nutrients a person must obtain from food because the body cannot make them for itself in sufficient quantity to meet physiological needs; also called indispensable nutrients. About 40 nutrients are currently known to be essential for human beings. Energy-yielding nutrients: the nutrients that break down to yield energy the body can use:

Abstract

Grains in present context are food grains. The PFA Act includes cereals, millets, and pulses in food grains. At times, seeds of certain oilseeds like soybean are also referred to in the discussion of food grains. Grains have been cultivated for thousands of years. We have Grain Standards as established by the International Organization for Standardization (ISO), which are considered as International Standards. Another source is Codex Alimentarius Commission (Codex) under the aegis of FAO (UN), which operates a Committee to formulate standards that are referred to as Codex Standards. Many countries have a National Standards Institution, which develops National Standards for their main grain crops and other commodities and issues specifications along with methods of testing and analysis. Several countries, which are in developing status, adopt or modify international standards into their national system. The Grain Standards have been evolved and established for a variety of purposes but primarily to grade produce in agricultural marketing largely to facilitate the movement of grain, provide both sellers and buyers with guidelines to support financial transactions, and ensure that the produce will meet up with end-use requirements, or, increasingly to protect the consumers.

Abstract

A survey of various wheat milling units (atta chakki) available around Indian Agricultural Research Institute, New Delhi was conducted to study the performance of these. The mills of various sizes (12", 16", 18", 20", 24" and 30" stone disc diameter) with horsepower ranging between 2 to 20 are in operation. Both horizontal and vertical disc types of mills are in use. The capacity of these units ranges between 10 kg/h to 200 kg/h. The stationary sieve, hand sieve, pedestal/exhaust fan are used for cleaning. The average wheat cleaning cost is Rs. 200 per ton. A small room of 8' x 10', 10' x 10' and 10' x 12' size is used for running the mills and storage of wheat grains. The grinding charges (Rs./q) of wheat, coarse grains (maize, sorghum, millet etc) and spices are 100, 200 and 1000, respectively. Sample of 500 g of wheat and flour were collected from each chakki and were analysed for wheat grain and flour quality. Infested, damaged grains were observed to be in 2-10% range. Sieve analysis of the flour was done and the average particle size, fineness modulus and uniformity index of the flour were calculated. Average particle size, fineness modulus and uniformity index were found in the range 0.1875 to 0.2023 mm, 1.052 to 1.297 and 0:1:9, respectively. Average particle size of the flour obtained from horizontal mills was found to be higher than vertical mills. Temperature of the flour at the outlet was observed in between 45 and 50°C at room temperature of 18.5°C.

Abstract

There is an urgent need to – create market driven linkages rather than do it alone by building new infrastructure. A lot needs to be done to improve infrastructure in terms of reducing the logistics cost, eliminating middlemen influence and eliminating the wastage of basic inputs. There is a need to blend technologies based on principle of dovetailing production for masses with the advantage of mass production, particularly in the area of grain processing, packaging and marketing which would help combine livelihood, security with agricultural competitiveness. Risk in crop production is not new to any age and the farmers have been bearing it since times immemorial. The farmers should be allowed to maximize their grain. High performance continuous and batch dryers remove moisture in a way that is predictable and reliable. The problems associated with moisture content may be harmful to international trade in grain and need to be addressed adequately by the standardization institutions.

Abstracts

About 60-70% of total food grain production is retained and stored by farmers for household consumption, use as seed, feed for cattle and payment of wages to labours etc. in our country. Yet the quality of grains stored is not so good, and hence, preserving the harvested crops without loss or damage has always been a problem of national importance. This study was conducted in Jabalpur district of Madhya Pradesh state. A tribal block namely Kundam was selected for study purpose. The responses of 120 women were recorded in pre-tested structural schedule through interview. Rural women are an important source of information on the use of indigenous practices for grain storage. The data reveals that the majority of respondents are using dry leaves of Neem, dry onion bulb, wheat straw, Nirgudi leaves, roots of bach etc. for storage of grain at household level. In our country, indigenous practices of grain storage have always been and are still followed, because it is supposed that these practices are useful in control of grain loss.

Abstract

Pulses constitute an important component of the diet and are a major source of protein in vegetarian diet. India has largest area under pulse cultivation and produces a variety of pulses. A large portion of this produce gets spoiled due to insect and fungal attack. A variety of insecticides and fungicides are used for the control of pest during storage. There is an increasing trend towards the reduction in the use of pesticides in storage due to strong demand from consumers to choose food with no pesticide residue, development of insect resistance to pesticides and the impact of pesticides’ use on environment. All these have posed a challenge to refine the existing management procedures of storage and commodity to find the optimal solution. Controlled/ Modified Atmosphere storage offers an alternative to the use of pesticides extends storage life and maintains product quality. The Controlled/Modified Atmosphere is created by altering the composition of the atmosphere in terms of CO2, O2, and N2 concentration. High CO2 produce undesirable conditions for insects and microbes and thus control their activity.

Abstract

Maintaining grain in good condition in storage requires careful, routine inspection and good storage practices. An integrated approach of several management tools and practice factors are necessary to manage stored grain to prevent deterioration and wastage: This includes:1) harvesting, handling, and storage equipment; 2) initial condition of the grain; 3) grain moisture content; 4) grain temperature; 5) aeration system management ; 6) insect and mold control; and 7) monitoring grain condition. An effective management program greatly enhances the likelihood of maintaining top quality grain. A well- designed and properly operated storage system with adequate aeration capacity, storing only clean grain at the proper moisture content and temperature, sanitizing the bin before loading, checking the grain condition regularly and correcting problems before they get out of hand are critical management strategies that must be implemented to prevent grain damage and possible serious economic loss.

Abstract

The demand for the food for ever increasing population is always continuous, but the production is limited to specific seasons. Therefore the food grains have to be stored for sometimes. Grain is a living biological material and therefore storage structures should be suitably designed to protect them from the ravages of pests, rodents and micro-organisms. However, the storage losses account for a major portion which can be reduced to considerable extent if proper care is done. The faulty design, poor maintenance and limited knowledge of the farmers concerning storage technology have greatly added to the spoilage of the food grains during storage. Sometimes the foods if not properly stored may be edible but it may lose the essential vitamins and minerals, thus their nutritive value has been lost. There is a major requirement of a good storage structure. Various food grain storage structures (small and large scale) are described.

Abstract

Three-point bend test (three point bend ring-HDP/3PB) for five types (Good day, Butter bite, Marie, Krack Jack and Salted) of commercial biscuit brands (Britannia, Supreme, Parle, Lancer, Priya Gold and Dalmia) was developed using TA-XT2, texture analyzer and probable factors affecting the results were assessed. Maximum force to break the biscuits, number of fracture before break, thickness of biscuits and percent break point penetration were found in the range of 1006.5 to 3456.5g, up to 3, 4.2 to 6.3mm and 5.54 to 22.62%. The rupture of biscuits were observed on the basis of probe penetration into the biscuits and found that maximum resistance for penetration offered by Marie whereas minimum by salted biscuits, which was respectively the hard dough and fermented dough biscuit varieties. The analysis of variance for the results revealed that there is significant difference (P£0.01) in the maximum force of break for the biscuit types and brands individually or in combination. Difference in the thickness of biscuits was also found significant among types and commercial brands. The number of fractures was not consistent among the types as well as biscuit brands before reaching the maximum force of breaking the biscuit.

Abstract
 
Technological advancement, increased urbanization, awareness and interest of consumer for variety products have given a great challenge to the food sector to develop inexpensive foods that are nutritionally superior and acceptable to the intended consumers. Keeping this objective in view, we have made an attempt to develop technology for variety products from wheat and corn and suitability of available varieties judged. With the emerging trends of food market towards fast foods, there are vast prospects for efficient utilization of cereals by exploring varieties products. A steamed bread (a Chinese traditional product) and Tortilla and corn chips (Mexican snacks) were developed. Steamed bread is defined as the product resulting from cooking or steaming fermented dough. Recipe and method for its preparation was standardized. Nutritionally rich steamed bread can be prepared by supplementing 10% level of chickpea and defatted soybean flour. Corn snacks have become a prime target of some consumer advocates and nutritionists who have referred them as a source of ‘empty calories’. But reality is that these snacks provide instant energy, as they are rich storehouse of nutrients. Process and recipe for the preparation of Tortilla and corn chips from Indian maize were standardized. The quality and acceptability of these snacks were worked out and found that these products were highly acceptable. Indian consumers have versatile taste, so these products will be readily accepted in Indian market. 

Abstract

Four bread wheat varieties (PBW-138, PBW-299, PBW-343 and PBW-373), two of durum wheat (PDW-215 and PDW-233) and two of triticale (TL-419 and TL-1210) were milled to obtain 70 percent extraction flour.  The grains and the flour samples of all the varieties were evaluated for proximate composition, rheological properties and pretzel making. Physical properties of durum wheat were better followed by bread wheat and triticale. Durum wheat were harder, had higher grain weight than bread wheat and triticale.  Protein, ash, fat, total sugars and enzyme activity were higher in triticale flour than bread and durum wheat flours while durum flour had higher pigments (ppm, b-carotene). Bread wheat flour was intermediate between durum and triticale flours with respect to fineness. Rheological studies revealed triticale flour to be the weakest flour. Pretzels prepared by using optimized recipe and method revealed PBW-343 and PBW-373 best for pretzel making.

Abstract

The establishment of All-India Coordinated Wheat Improvement Project in 1965 coincided with the introduction of high yielding semi-dwarf wheat varieties. Since then India has made very impressive progress in increasing wheat production over the past three and half decades. India now ranks as the second largest wheat-producing nation in the world. In fact from a state of “Ship to mouth” in 30 years or so India has become a nation of surpluses. The significant contribution made by the project in helping the increased wheat production cannot be ignored. Through coordinated research and development, nearly 200 wheat varieties have been developed during the last 35 years in India. However, only a small number of them produced without backing of specific quality breeding programs excel in quality traits also. The increasing demand of baked and pasta products in the country along with economic liberalization and global trade have offered opportunities for better utilization of the surplus wheat. Thus, in the current decade and beyond, wheat quality needs uppermost attention to meet the trade requirements for domestic and export purposes. Therefore, there is a need to reorient the wheat improvement programs in the country.

Abstract

Sunflower seeds of variety PSFH- 67 were obtained from the PAU seed farm. These seeds were cleaned with commonly used seed processing equipment. Samples were divided into 2 parts. One part was kept as such for taking the observations of feed (control) and the remaining part was passed through specific gravity separator for its refinement. The various fractions obtained were recovery (heavier, healthy seeds), middlings (intermediate, under size) and rejections (lightweight seeds, wevil eaten, foreign matter). The respective percentages of each fraction were computed. These graded fractions as well as the feed were packed in 2-kg cloth bags and stored under ambient conditions. Different quality parameters viz. moisture content, physical purity, percent germination, thousand grain weight and vigour index were recorded at 30 days interval from Jan, 2010 to Apr. 2010. The physical purity, moisture content, thousand grain weight, percent germination, root length, shoot length and vigour index were found to be higher in recovery and minimum for rejections while moisture content was highest for rejection compared to all other fractions. The physical purity remained more or less constant throughout the period of storage. The thousand-grain weight showed a rapid decrease during first month thereafter it remained constant. There was continuous decrease in percent germination with the period of storage irrespective of the treatment.

Abstract

High moisture paddy can be dried in a trolley drier at farm level/grain market to reduce losses during various post harvest operations. During last two paddy harvesting seasons quality analysis of eight, most popular varieties of fresh paddy arrivals from about 40 grain markets, scattered all over Punjab, was performed. Monitoring of paddy in grain markets showed that maximum number of samples (62.7%) was in the range of 12-18%, moisture content (w.b.). Over-dried paddy samples (<12% m.c., w.b.) were only 9.1%. The samples with more than 18% m.c ,w.b. (high moisture paddy) were 28.2%, which have to be dried to safe moisture levels. Milling characteristics of the analyzed samples indicated that the broken percentage was highest (25.5%) in PR-113 followed by PR-111 (20.6%) and minimum in Pusa-44 (12%). The highest insect- pest infestation (Sitotroga cerealella (olivier) was observed in PR-108, followed by PR-116, PR-113, PR-111, Lal Mundi, Govinda, PR-114 and Sharbati. The Mycoflora isolated and identified were Aspergillus, Penicillium, Mucor, Rhizopus, Alternaria, Curvularia, Helminthosporium and Cladosporium spp. Maximum fungal infestation were associated with samples of PR-108 variety. To avoid further proliferation of mycoflora and inset pests, paddy should be dried to safe moisture levels for further storage and processing. For this, a trolley drier has been developed by converting a conventional farmer’s tractor trolley, into a portable drier, which can reduce 5% moisture of 1 tonne batch of paddy in about 100 minutes, consuming 56 kWh of electrical energy

Abstract

‘Made in India’ is no more a sign of poor quality. However, in the field of food grain exports, India is still lacking the required determination. The Indian food grains get rejected in the International market because of its out-dated post harvest technology (PHT). The Food Corporation of India (FCI) is the nodal national agency for the procurement, storage, processing and transporting of food grains, and their further distribution through the Public Distribution System (PDS). The government fixes the procurement price as well as the distribution price of the food grains, and the FCI has to accept it. The government compensates the resulting loss through subsidy. The government, through FCI, must encourage cultivation and marketing of premium quality food grains, by offering suitable incentives to farmers. The cost of marketing, storage and transporting of food grains can be considerably reduced with simultaneous improvement in quality of the end product, if the prevailing bag handling is replaced by bulk handling, storage, and transportation. However this needs closer coordination between various departments of the Ministry of Food and Ministry of Railways. The President of India revealed his vision to make India a developed country by the year 2020. To achieve this, the current post harvest losses to the tune of 10 percent must be reduced to 2 percent. This is possible if the government takes bold political decision supported by equally firm and time-bound necessary

Abstract

India has become not only self sufficient in food grains but has also emerged as net exporter of wheat and rice. Acute famines in India have practically been eliminated, thanks to increased food availability at the national level, improved early warning systems and expanding infrastructure for more rapid transport of food grains and other products to needy areas. However, the existing post management system, strategies and policies don’t seem to match new challenges. Despite government intervention in pricing and procurement of food grains, primarily wheat and paddy, India continues to suffer heavily on account of losses and wastages incurred during the post harvest stages, which are more manmade than natural. Some losses have already occurred before the arrival of food grains in the regulated and wholesale markets and continue till food grains reach their destination. What contribute to continuing losses and wastages are improper post harvest handling, government policies and their implementation, which even stifle growth and modernisation of grain markets and processors.

Abstract

Garden peas of two cultivars (Pb-87 and Pb-88) were procured. Pods were shelled manually, grains were blanched and dehydrated. Other lot of peas of both the varieties was allowed to mature on the plant till the plant foliage dried up, harvested, pods were dried in shade for few days, shelled manually and grains were further dried in shade. Grits were prepared by grinding rice and pea (dhal) in a laboratory grinder to pass through 20 mesh sieve. Blends were prepared by mixing rice and pea grits in the ratio of 100:0, 85:15 and 70:30. The blends were subjected to extrusion cooking using Brabender single screw extruder. The extruder die pressure, specific energy consumption (SEC), expansion ratio, density, water absorption index (WAI), water solubility index (WSI) and organoleptic characteristics were studied. Addition of pea grits resulted in a decrease in die pressure in all the blends. Addition of pea grits showed a significant effect on SEC. A decrease in expansion with increase in the level of pea grits in blend was observed. The extrudates having lower expansion showed higher density values and vice versa. Effect of replacement of rice grits with pea grits on WAI was found to be significant. Level of pea grits significantly affected the WSI. Incorporation of pea grits in the rice grits significantly affected the sensory characteristics. Replacement of rice grits with mechanically dried pea grits resulted in deterioration of acceptability score, but addition of field dried pea grits improved the same.