eChapters

Introduction

A thematic layer is defined as a layer with a set of logical feature data placed under single theme such as soil type, pH level, salinity, and water table. The features in these layers determine real world objects and are created using geometries such as points, lines and polygons (Tickoo 2017). Thematic layering is the spatial representation of analyzed data of elements that belong to the same type. Thematic maps are used to create these layers, which show how one or more specific data themes vary across different geographic areas.

Maps make it easier to interpret and communicate the results of any GIS analysis. R has a large number of packages for making thematic maps. Static mapping is straightforward with plot()methods provided by core spatial packages sf and raster. The use of plot() function have been discussed in the previous chapters. Another package for mapping isspwithspplot() having enough options for producing good quality thematic maps.It is also possible to create advanced maps using ggplot2. This chapter discusses, separately, preparing thematic maps from vectors and rasters with the above mentioned packages. A dedicated map-making package tmaphas been given special focus in this chapter.

Arsenic contamination of groundwater is a form of groundwater pollution that is often due to naturally occurring high concentrations of arsenic in deeper levels of groundwater. The Ganges Delta’s usage of deep tube wells for water delivery has raised awareness of the issue because it has led to widespread arsenic poisoning in significant numbers of people. During the weathering of rocks and minerals, which is followed by subsequent leaching and runoff, arsenic (As) is released into the soil and groundwater. Additionally, anthropogenic sources can transfer it into the soil and groundwater. Six West Bengal districts with a combined area of 34000 km2 and a population of 30 million have been determined to have groundwater levels of arsenic over the WHO maximum allowable limit of 0.05 mg l1. (Alam et al.,2002)

At present, 37 administrative blocks by the side of the river Ganga and adjoining areas are affected. Areas affected by arsenic contamination in groundwater are all located in the upper delta plain and are mostly in the abandoned meander belt. More than 800 000 people from 312 villages/wards are drinking arsenic-contaminated water and amongst them, at least 175 000 people show arsenical skin lesions. Thousands of tube well water in these six districts have been analysed for arsenic species. Hair, nails, scales, urine, and liver tissue analyses show elevated concentrations of arsenic in people drinking arsenic-contaminated water for a longer period. Arsenic comes from a geological source. Only a few soil strata have high arsenic contents, which are determined to be linked to iron-pyrites according to investigations of bore hole silt. Arsenical skin lesions in various areas cause a variety of societal issues. (Das et al.,1996)

• A machine is a device which receives some sort of energy and does some work.
• A rigid link is one, which does not undergo any deformation while transmitting motion.
• A flexible link is one which is partly deformed in a manner not to affect the transmission of motion.
• A structure is an assemblage of a number of resistant bodies having no relative motion between them.
• A turning pair has a completely constrained motion.
• Cam and follower includes higher pair.
• The lower pairs are self-closed pair.

Introduction

The age-old necessities of life are food, clothing and shelter. The 20^th century had dramatized a fourth-energy. Energy starvation of the technological complex that maintains modern society may soon be as crucial a problem as feeding the hungry. Indeed, energy starvation could well precipitate more wide spread food starvation. Solutions for the energy crisis are strongly dependent on the technology of how energy is produced and used. To make a physical change in the world it is necessary to use four resources: energy, matter, space and time. How well a task has been performed can be measured in terms of amount of fuel consumed, the mass of material used, the space occupied, the hours of labour to accomplish it, and the ingenuity with which these resources are utilized. Squandering of irreplaceable energy resources, waste of materials, or large expenditure of space and time cannot be tolerated if the necessities of life are to be provided for all. Energy is intricately linked to development of a country. Growing demand on account of industrialization, urbanization, transportation and also increase consumption in rural areas is putting added pressure on energy supply network. Electricity generation has been increased from 1,400 MW in the year 1947 to 303,118 MW up to August 31, 2016 in India but still there is 10-15% shortage of power in peak hours and all villages are not electrified. Even many electrified villages receive 6 to 8 hours of electricity per day in India. To overcome this shortage there is a need to utilise new and renewable sources of energy. Fortunately, India is blessed with abundant solar energy. The arid parts of India receives much more radiation as compared to the rest of country i.e. maximum solar radiation i.e. 7600-8000 MJm^-2 (2111-2222 kWhm^-2) per annum, followed by semi-arid parts, 7200-7600 MJm^-2 (2000-2111 kWhm^-2), per annum and least on hilly areas where solar radiation is still appreciable i.e. 6000 MJm^-2 (1667 kWhm^-2) per annum (IMD 1985). In this chapter review of different solar thermal technologies in Indian perspective has been carried out.

Introduction

Solar air heating is the conversion of solar radiation to thermal heat. The thermal heat is absorbed and carried by air which is delivered to a living or working space. The transparent property of air means that it does not directly absorb effective amounts of solar radiation, so an intermediate process is required to make this energy transfer possible and deliver the heated air into a living space (Fig.10.1). The technologies designed to facilitate this process are known as solar air heaters. Solar air heating technologies use only free, renewable and clean energy and can help defray the rising cost of conventional energy.

Introduction

Therapeutic foods are products, which are multiutility food products that may be used as nutrition as well as medicine. A nutraceutical may be defined as a substance, which has physiological benefit or provides protection against chronic disease. Nutraceuticals are used to improve health, delay the aging process, prevent chronic diseases, increase life expectancy, or support the structure and/or function of the body. Oflate nutraceuticals are receiving considerable interest due to potential nutritional, safety and therapeutic effects. The examples of therapeutic foods are the foods used for feeding of malnourished children on an emergency basis or to supplement the diets of persons with special nutrition requirements, such as the elderly. Therapeutic foods can also form a part of treatment/prevention/reduction of other health conditions such as diabetes, cardiovascular disease, obesity, anaemia and any other lifestyle disorders.

The incidences of diet-related diseases are progressively increasing due to greater availability of calorie-rich foods and a sedentary lifestyle. Obesity, diabetes, atherosclerosis, and neurodegeneration are major diet-related diseases. Nutraceuticals and functional foods represent a novel therapeutic approach to prevent or attenuate diet-related diseases.

There is always a requirement for cheaper formulations using locally available ingredients that are processed in a safe, reliable, and financially sustainable methods. Some of the literature available on health foods for various diseases is summarized below. However, since the burden of diabetes in India is staggering. In 2017, 72 million cases of people suffering from diabetes were reported and the figures are expected to reach 134 million by 2025, this chapter more emphasis is given on the safe, natural treatment/reduction of diabetes by herbal means.

Temperature regulates germination, plant growth, flowering, maturity and many insect and disease processes. Thermal indices integrate temperature over time to quantify biological development more effectively than simple temperature averages. This chapter introduces growing degree days, heat units, photothermal units, heliothermal units and related measures. It explains base, optimum and maximum temperatures and connects accumulated thermal time with crop phenology. These indices help predict development stages, adjust sowing dates, estimate harvest periods, schedule farm operations and assess varietal suitability. Thermal-index analysis is particularly valuable under climate variability because it enables researchers and farmers to anticipate shifts in crop development and improve climate-responsive agricultural management.

Thermal preservation is among the most established methods for improving the safety and storage life of food. It uses controlled heating to destroy spoilage organisms and pathogens and to inactivate undesirable enzymes. Processing intensity varies according to the target microorganisms, food composition, packaging and required shelf life. Pasteurisation reduces pathogenic and spoilage microorganisms without achieving complete sterility, while sterilisation destroys more heat-resistant organisms and spores to produce commercially stable foods. Ultra-high-temperature processing combines very high temperatures with extremely short treatment periods. This chapter also discusses retort processing, thermal-death kinetics and microbial-inactivation models used to design safe processes while minimising nutritional and sensory damage.

Q. 1 The amount of heat required to raise the temperature of 1gm milk by
one degree celsius in comparison to water is
(A) 85 %     (B) 93 %
(C) 107 %    (D) 100 %

Abstract

Thermal properties of food are its ability to conduct, store and lose heat. These properties are inherent in food processing and preservation practices. Thermal properties are important for modelling processes, engineering design of processing equipment, sterilization and aseptic processing. Important thermal properties are thermal conductivity, specific heat and thermal diffusivity. These properties depend on chemical composition, water fraction and temperature.

Introduction

Thermal properties are involved in almost every food processing operation. It is essential to have knowledge of thermal properties of foods which is important in analysis and design of various food processes and food process equipment involved in heat transport. Thermal properties of food are greatly depending on composition, temperature and density of food. Thermal properties required for heat transfer calculation include specific heat, enthalpy, thermal conductivity and thermal diffusivity. Thermal properties of foods are related to heat transfer control in specified foods and can be classified as thermodynamic properties (enthalpy and entropy) and heat transport properties (thermal conductivity and thermal diffusivity). Thermo physical properties not only include thermodynamic and heat transport properties, but also other physical properties involved in the transfer of heat, such as freeze and boiling point, mass, density, porosity, and viscosity. These properties play an important role in the design and prediction of heat transfer operations during the handling, processing, canning, storing, and distribution of foods.

Thermal stress arises whenever there is some increase or decrease in temperature of a body which causes either expansion or contraction in the dimension of body. If body is free to expand or contract, with the rise or fall of temperature, there exist no stress in the body. But if deformation of the body is partially or completely resisted then stresses are set up in the body which is known as Thermal Stress. However amount of stress induced in partially prevented deformation will be small than in case deformation is totally prevented.

2.1 Introduction

The name thermodynamics stems from the Greek words therme (heat) and dynamis (power), which is most descriptive of the early efforts to convert heat into power. It may be defined as the science that deals with the relations among heat, work and properties of a system. Today, thermodynamics is broadly interpreted to include all aspects of energy and energy transformations, including power generation, refrigeration, and relationships among the properties of matter. It is viewed as the science of energy, and thermal engineering is concerned with making the best use of available energy resources.

Thermodynamics basically entails four laws or axioms known as Zeroth, First, Second and Third law of thermodynamics.

The zeroth law deals with thermal equilibrium and establishes a concept of temperature.

The first law pertains to the conservation of energy and introduces the concept of internal energy.

The second law indicates the limit of converting heat into work and introduces the concept of entropy.

The third law defines the absolute zero of entropy.

The concept of energy was introduced by Newton in the field of mechanics during generalizing the hypothesis of kinetic and potential energies. Energy may be defined as the capacity to do work and it is a scalar quantity. It cannot be seen or observed. Its presence can, however, be felt by the properties of the system. There occurs a change in one or more properties of the system in case of energy transfer. The absolute value of energy of a system is difficult to measure, whereas the energy change is rather easy to calculate. Energy follows the conservation law, one of the most fundamental laws of nature, which simply states that during an interaction, energy can change its form from one form to another but the total amount of energy remains constant, that is, energy cannot be created or destroyed only form can be changed.

Direction of rotation can be reversed in
(A) 2- stroke engine           (B) 4- stroke engine
(C) Both (A) and (B)          (D) None of these

Thermodynamics is defined as the “branch of science which deals with the interaction between the heat and work”[1]. Thermodynamics is also sometimes stated as the science of energy. Thermodynamic deals with the principles of energy and energy conversion in engineering. It also considers the thermodynamic properties of substances. Thermodynamics deals with the conversion of heat into work and vice-versa.

Based on the nature and purpose of the content, there are numerous classes of scientific communications. Theses represent the class of research communications that are of great importance to the students. Thesis is part and parcel of the master’s and doctoral programme in almost every academic institution. In some institutions, even the bachelor students are expected to submit their brief report on project.

Introduction

India’s textile sector is one of the oldest industries in the Indian economy, dating back several centuries. The industry is highly varied, with hand-spun and hand woven textiles sectors at one end of the spectrum and the capital-intensive sophisticated mill sector at the other. The fundamental strength of the textile industry in India is its strong production base of a wide range of fiber/yarns, from natural fibers like cotton, jute, silk, and wool, to synthetic/man-made fibers like polyester, viscose, nylon, and acrylic.

22.1. What?

Threshing is the process of separating grains from the straw or pod by impact, friction or both. Threshing should be done at an appropriate time after harvest. Delayed threshing causes rapid deterioration of the grains, especially during field drying or when the crop is stacked in the field. Improper threshing leads to wastage of grains and reduces the quantity of final marketable produce. After threshing, the produce has to be winnowed to remove lighter materials such as unfilled grains, chaff, weed seeds and straw using a blower, air fan or wind. Winnowing improves the ability of the grain to be safely stored, milling output and quality.

22.2. Methods employed

Traditionally, threshing is done by beating the harvested crop on a threshing floor directly or with a stick. Another traditional method of threshing is to make a bull walk in circles on the grain on a hard surface. In some areas, the harvested panicle with grain is spread on the surface of a country road so that the grain may be threshed by the wheels of passing vehicles. In these methods winnowing is separately performed. However, with the development of technology, now it is mostly done by machine referred to as threshers, shellers and stripper. Some of these threshers have inbuilt facility for threshing. Thus, threshing and winnowing are completed in a single process.

It is a mechanical manipulation of soil to provide favourable condition for crop production. Soil tillage consists of breaking the compact surface of earth to a certain depth and to loosen the soil mass, so as to enable the roots of the crops to penetrate and spread into the soil.

Tillage operations following primary tillage which are performed to create proper soil tilth for seeding and planting are secondary tillage. These are lighter and finer operations, performed on the soil after primary tillage operations. Secondary tillage consists of conditioning the soil to meet the different tillage objectives of the farm. These operations consume less power per unit area compared to primary tillage operations. Secondary tillage implements may be tractor drawn or bullock drawn implements.

Tillage is a common agricultural practice that involves preparing the soil for planting crops. It is the manipulation of soil to create a suitable seedbed, manage weeds, and improve soil structure for optimal crop growth. Tillage methods can vary widely and are often classified into different types based on their intensity and purpose. Here are some common types of tillage:

1. Conventional Tillage: This is the most intensive form of tillage and involves turning over the soil completely, often using a plow. It disrupts the natural soil structure and exposes the soil to erosion but can effectively control weeds and prepare a clean seedbed.

2. Reduced Tillage: Also known as conservation tillage, this method aims to disturb the soil as little as possible. It typically involves minimal or no plowing and relies on techniques like no-till, strip-till, or zone-till. Reduced tillage helps to maintain soil structure and reduce erosion while conserving moisture.

3. No-Till: In this approach, the soil is left undisturbed, with crop residues from previous harvests left on the field surface. A planter creates small openings in the soil for seeds. No-till farming helps retain moisture, reduce erosion, and maintain soil health. It is widely adopted for its conservation benefits.

Duration: 60-75 minutes
Objective: Master techniques to prioritize tasks, meet deadlines, and reduce stress for improved productivity and work-life balance.
Why It Matters
Effective time management ensures focus on high-impact tasks, reduces procrastination, and prevents burnout. Poor time management leads to missed deadlines, stress, and lower quality work. For example, spending hours on emails instead of strategic planning can derail priorities. This module provides tools to optimize time usage.
Learning Outcomes: By the end of this module, participants will:
1. Understand prioritization and planning techniques (e.g., Eisenhower Matrix, Pomodoro).
2. Practice strategies to minimize distractions and delegate effectively.
3. Create a personalized time management plan.

8.1. Vegetables

8.1.1. Tomato (Lycopsarsicon Esculentum)

Temperature: A warm climate crop can tolerate high temperature but cannot withstand frost. Minimum temperature for germination of seed is 8 to 10°C. Night temperature for fruit setting is 12 to 22°C. Critical night temperature for fruit setting is below 12°C. Critical day temperature for fruit setting is above 32°C. If the greenhouse can maintain the temperature as mentioned above then the non-terminal or indeterminate tomato crop can be grown for 10 to 12 month duration.

Variety: Indeterminate (producing flowers and fruits continuously along the stem as it grows) hybrid varieties resistant to nematodes or fusarium or verticilium wilt disease may be selected.

2.1. Biotechnology institutes

Regional office of ICGEB (International Centre for Genetic Engineering and Biotechnology) at New Delhi (Headquarters at Trieste, Italy established in 1983).

Lal Bahadhur Shastri Centre for Advanced Research in Biotechnology at IARI, New Delhi

National Institute of Animal Biotechnology, Hyderabad

Aim: To study the effect of variation of field current upon the stator current and power factor with synchronous motor running at no-load, hence to draw V and inverted V curves of the motor.

With constant mechanical load on the synchronous motor, the variation of field current changes the armature current drawn by the motor and also its operating power factor. As such, the behavior of the synchronous motor is described below under three different modes of field excitation.

Scientific research is always based on observable and measurable facts. This applies to physical as well as humanitarian fields of science. In order to investigate social or psychological phenomenon, most of the times we need quantified information related to the phenomenon under investigation. In order to secure this data, we need one or more method/ means of collecting observable/measurable data.

In this chapter we will talk about the tools which are required to make project in artificial intelligence. All this bellow discussed tools are uses python programming language for making any project in any respective field. We have discussed about how anyone can install and use the tools to built a real time project in artificial Intelligence.

Using Python IDE

To download and install Python visit the official website of Python https://www.python.org/downloads/and choose your version. We have chosen Python version as per requirement all the codes in this book were on python version 3.6 as you can see in the Fig. 7.1.

1. Tyson Foods Inc. 
2210 W. Oaklawn Drive, Springdale, AR 72762-6999 
Phone  : 479-290-4000; Fax  : 479-290-4061; Web site  : www.tyson.com

Executives : Chairman : John Tyson; Pres./CEO : Richard Bond; SVP-Intl. Ops. : Mike Baker; SVP-Commodity Trading & Risk Management : Jean Mrha Beach; Group VP-Research & Development, Logistics & Tech Services : Hal Carper; SVP & CIO : Gary Cooper; Group VP & International Pres. : Rick Greubel Jr.; SVP, Controller & CAO : Craig Hart; VP, Assoc. General Counsel & Secretary : R. Read Hudson; Group VP-Ops : Donnie King; SVP-Human Resources : Ken Kimbro; EVP & CFO : Dennis Leatherby; Group VP-Food Service : Bernard Leonard; Sr. Group VP-Fresh Meats : James Lochner; SVP-External Relations : Archie Shaffer III; Group VP-Consumer Prods : Donnie Smith; EVP & General Counsel : David Van Bebber; SVP-Renewable Products : Jeff Webster; VP-Investor Relations & Asst. Secretary : Ruth Ann Wisener

Fundamentally toposheet represents a kind of map in which topographic features of particular area is given details on the map features in two dimensional land surfaces. It shows both horizontal and vertical portion of the terrain with a combination of contour lines, contours, symbols, labels and related representation together in one piece of paper. Toposheet portray the shapes, location of mountains, many natural and manmade features, and the toposheet combinedly uses for extracting accurate information about particular area containing land surface features.

6.1 Introduction

Torrefaction is a thermophilic process of biomass conversion into a solid, friable, homogenous coal-like material, which has better fuel characteristics than the original biomass. Torrefaction involves the heating of biomass material in the absence of air at 250 to 300°C temperature. Torrefaction produces high-grade hydrophobic nature solid biofuels from various streams of woody biomass or agro residues.Torrefied biomass has high energy density then the original biomass which make torrefied biomass as renewable alternate source for power generation in coal power plant. Torrefied biomass being hydrophobic in nature can be stored easily for longer duration with negligible biological degradation. At 250-300°C temperature volatilization has been taking place and around 30% mass of the biomass is reduced as compared to original untorrefied biomass with net energy loss of approximately around 10%.The end product is a predictable, homogeneous, hydrophobic, high value solid biofuel with far higher energy density and calorific value than the original biomass feedstock. During the torrefaction process a combustible gas is released, which can also utilised to provide heat to the process. The process diagram of torrefaction process is shown in Fig. 6.1.

Hardness is the total soluble Ca and Mg Salts (in same cases Fe salts). It includes sulphates and chlorides along with carbonate, bicarbonate and hydroxide salts. Soft water: 0-100 mg/L, Hard water: 100 - 300 mg/L, Very hard water: > 300 mg/L CaCO3. Total hardness should be 50- 300 mg/L. Very hard water causes osmoregulatory stress to fish. Hardness below 50 mg/L reduces growth of plankton.
Reagents
1. 10.01M EDTA solution: Dissolve 3.72 g disodium salt of EDTA in distilled water and make the volume 1L by shaking.
2. Eriochrome Black T (EBT) Indicator: Add 0.2 g dry Eriochrome powder to 50 ml of triethyl amine. Add 5 ml absolute alcohol and shake it.
3. Ammonium chloride-Ammonium hydroxide buffer solution: Dissolve 17.5g ammonium chloride (NH4Cl) in 142 ml of ammonia solution (NH4OH). Add distilled water to make the volume 250 ml.
Procedure
1. Take 50ml water sample in a 250 ml conical flask.
2. Add 2 ml buffer solution and 5 drops of EBT indicator.
3. Wine-red colour will appear.
4. Titrate against 0.01M EDTA till the colour changes into bright greenish blue.

Phosphorus is nearly exclusive found as phosphates in waters and wastewater and it categorised in to: a) orthophosphate, (b) organically bound phosphate and (c) condensed phosphates. Theses all three forms of phosphorus occur in solution, in the body of aquatic organisms through food chain. All the forms of phosphorous, whether dissolved or particulate are converted to inorganic forms (phosphate) after digestion of sample. Various methods use for the digestion of the sample including use of perchloric acid, H2SO4- K2SO4, H2SO4- HNO3 etc. The H2SO4- HNO3 digestion technique is discussed here.
Reagents
1. Phenolphthalein indicator
2. Conc. sulphuric acid (H2SO4)
3. Conc. nitric acid (HNO3)
4. Sodium hydroxide (NaOH), 1 N: Dissolve take 40 g of NaOH in 1000 ml of distilled water
Procedure
Digestion
1. Take 50 ml of sample in a Kjeldahl flask
2. Add 1 ml H2SO4 and 5 ml HNO3
3. Once the HNO completely removed, digest the sample on a hot plate until the volume approaches 5 ml. Then, keep heating the solution until it loses colour (you may also heat it in a beaker covered with a watch glass to prevent excessive evaporation).

The total plate count (TPC) is also called the Bacterial plate count (BPC), aerobic plate count, standard plate count (SPC), total viable count (TVC) or mesophilic count represents the number of colony forming units (CFU) per g (or per mL) of growing microorganisms such as bacteria, yeast and mold on a nonspecific solid bacteriological growth medium under the specified conditions. Temperature, incubating time, medium type, and any other conditions used in the enumeration varies upon reference standards and laboratory objectives. Laboratories participating in the program choose their own routine conditions.
Principle
Usually direct count of too many bacteria in a sample is difficult but the bacterial colonies may be used as a measure of the bacterial cells in the known serially dilution and plated out on an agar surface in such a way that single isolated bacteria form visible isolated colonies. However, colony-forming unit might actually consist of a chain of bacteria rather than a single bacterium if the organism often develops various cell configurations, such chains. Furthermore, a portion of the bacteria might be grouped together. Thus, typically refer to the process of using the plate count technique as a means of estimating the number of colony forming units (CFUs) in that known solution. Then further this figure use to extrapolate the total amount of CFUs present in the original sample.

Abstract
 
The definition of quality is described from a very simpler one “fitness for purpose or use” to a comprehensive “the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs”. The concept of total quality management in food industry is adopted recently and it is the “integrated organization approach in delighting customer (both external and internal) by meeting their expectations on a continuous basis through everyone involved with the organization working on continuous improvement in all products/processes along with proper problem solving methodology”. TQM is concerned with the integration of all the efforts in organization towards quality improvement, quality development and quality maintenance to meet full customer satisfaction at economic levels. TQM enhances the work culture and employee’s satisfaction through participation and involvement and consequently the image of the organization.

Principle
The estimation of all solids, including dissolved, volatile, and suspended solids, is called total solids (TS). The residue that remains after the unfiltered sample evaporates between 103 and 105°C can be used to estimate total solids. Total dissolved solids (TDS) and Total suspended solids (TSS) are its two constituent components. After heating to 550°C, each fraction is separated once more into fixed solids and volatile suspended solids (VSS). The percentage of ash that remains is called fixed solids, while VSS is the organic proportion that was lost as CO2.
Apparatus
1. Ceramic or platinum evaporating dishes 100 mL volume.
2. Dessicator contain CuSO4.5H2O. Desiccator, provided with a desiccant containing a colour indicator of moisture (CuSO4.5H2O).
3. Analytical balance
4. Hot air oven
Procedure
1. Take a clean evaporating beaker or dish of required volume and dry it at hot air oven at 103 to 105oC for 1h, then cool and store it in a desiccator until needed. Immediately weigh before use. Note » the initial weight (Wi) in mg.
2. Take 250-300 ml or required volume of unfiltered well mixed sample in it (beaker or dish).
3. Place it in hot air oven at 103 to 105 oC for 2 h.
4. Cool it in a desiccator and take the final weight (Wf) in mg.
5. Replication the above process until a constant weight is achieved

In 1920, although electric vehicles were not used on the American farms about 5,000 electric industrial trucks were produced by 12 American manufacturers, while estimates of the total fleet ranged from 6,000 to 15,000, most of them built during the war. Most used an exchange charging system. Among the manufacturers seen in and around cities and towns were the Commercial Truck Company, the Lansden Company, the Walker Vehicle Company (now owned by Commonwealth Edison), the Ward Motor Vehicle Company, the Steinmetz Electric Motor Corporation, Walter Motor Truck Company, and the Baker R L Corporation.One step away from agriculture, Charles A. Ward of New York City, was head of his family’s baking company, made up of the Mackey Company, the Ward Corby Company, the Ward Bread Companyand the Ohio Baking Company of Cleveland. In 1911, Ward had decided to replace his horse-drawn delivery vehicles with electric trucks, thus doing away with the unsanitary stable hitherto part of or adjacent to bakery.¹

Alongside this, the challenge of using stationary electric agricultural machines continued to be met. Two innovations which entered into dairy farming were the milk cream electric centrifugal separator and the surge milker. The Babson brothers (Henry, Fred and Gus) of Chicago were friends of and dealers for electrical battery inventor and entrepreneur Thomas Edison, and importers of Belgian-made Méllote separators. In 1916, the Babsonsproduced their own Pine Tree milking machine. While the overall design was similar to others, the electrically powered Pine Tree Pulsator outperformed any other pulsator made. These machines were powered by a 32-volt Delco system with 12 batteries near the barn. Pine Tree Pulsators were simple enough that the farmer could maintain them himself. The Pine Tree Pulsator was patented in 1921. The problem with this unit was that it was difficult to keep clean.

Q. 1 Improper wheel balancing results in :-
(A) Excessive tyre pressure       (B) Excessive tyre speed
(C) Excessive tyre wear             (D) All above

Tractor is a self-propelled power unit having wheels or tracks for operating agricultural implements and machines including trailers. Tractor engine is used as a prime mover for active tools and stationary farm machinery through power take-off shaft (PTO) or belt pulley.

Power tiller is a prime mover in which the direction of travel and its control for field operation is performed by the operator walking behind it. It is also known as hand tractor or walking type tractor. The concept of power tiller came in the world in the year 1920. Japan is the first country to use power tiller on large scale. Power tiller was first introduced in India in the year 1963. Power tiller is a walking type tractor. The operator walks behind the power tiller, holding the two handles of power tiller in his own hands. Power tiller may be called a single axle walking type tractor, though a riding seat is provided in certain designs. In agricultural applications it is often required to transmit the mechanical power from its source to the point of application. The main sources of power for agricultural machines, i.e., the diesel engine for self-propelled machines and the electrical motor for many stationary machines are primarily rotary power and are transmitted by means of belts and chains. Tractor power is utilized by traction, power-take-off drives (PTO) by fluid power.

INTRODUCTION
Tractors used for agricultural activities are used with many different agricultural implements for plowing, planting, harvesting and other operations. Tractors used for construction and industrial activities are used to pull and operate machinery used for transporting loads, digging, grading and other operations. Tractors and power tillers are pivotal machines that have revolutionized agricultural and industrial practices across the globe. These versatile vehicles have played an essential role in enhancing productivity, efficiency, and speed in a wide range of operations. In agriculture, tractors are used for various tasks such as plowing, tilling, planting, irrigation, and harvesting. They serve as the backbone of modern farming, significantly reducing labor costs and the time required to complete essential activities. Coupled with specialized implements, tractors can perform tasks with remarkable precision and consistency, resulting in increased crop yields and improved soil health. Power tillers, on the other hand, offer a more compact and affordable alternative to tractors, especially in regions where small-scale farming predominates. These machines are primarily used for tilling the soil, making them particularly valuable in cultivating land in small to medium-sized agricultural fields. Despite their smaller size and lower horsepower compared to tractors, power tillers are capable of performing various tasks such as weeding, leveling, and inter-row cultivation, providing farmers with a cost-effective solution for enhancing farm productivity. Both tractors and power tillers are indispensable in modern agriculture, as they provide the necessary power and efficiency to carry out a wide range of field operations. Moreover, these machines have found applications in construction, road development, and other industries, where they are used for tasks like hauling, digging, and leveling. With technological advancements, the capabilities

Q. 1 Toe-in and toe-out are related with
(A) Front axle of tractor     (B) Rear axle of tractor
(C) Tractor steering           (D) Transmission system

Q. 1 In agricultural tractors, the vibration level is in the range of .......... Hz.
(A) 0 – 2         (B) 2 - 8
(C) 8 – 20       (D) More than 20

Q. 1 A device which is used to store energy in hydraulic system is known as
(A) Motor             (B) Cylinder
(C) Accumulator  (D) Pump

4.1. Tractor

Self propelled power unit having wheels or tracks for operating agricultural implements and machines including trailers.

Tractor engine is used as a prime mover for active tools and stationary farm machinery through power-take off (pto) or belt pulley.

Traditional food-preservation methods reflect generations of practical knowledge concerning food safety, storage and seasonal availability. Although commonly performed at the household level, these methods are supported by scientific principles such as reducing water activity, lowering pH, inactivating enzymes and restricting microbial growth. Blanching, fermentation, sun drying, increasing solute concentration, pickling, smoking and curing preserve foods through different combinations of heat, dehydration, acidity, beneficial microorganisms and antimicrobial compounds. Their materials and equipment are generally accessible, making them suitable for home-scale application. The chapter explains the principle, mechanism, application and nutritional implications of each method while showing their continuing relevance in contemporary food systems.

Training helps people to become qualified and proficient in doing some jobs (Dahama, 1979). Usually an organization facilitates the employees’ learning through training so that their modified behaviour contributes to the attainment of the organization’s goals and objectives.
 
Training needs refer to the gaps between desired and expected levels of performance. Needs may be numerous. Besides they also need group, affection, recognition and fulfilment of their talents.

Training need may be defined as difference between existing and desired performance of person(s). In other words it is a gap between job requirement and job performance. That means it is gap between the existing and desired level of competency. Thus, the attitude, knowledge and skills of a person are lower than desired if the gap is significant there is a need for training.

Introduction

Today we are part of a highly complex and dynamic society. The complexity and dynamism are primarily due to the chain of changes induced by the scientific and industrial developments. The impetus provided by the information explosion coupled with scientific and technological developments to human life has triggered several unimaginable developments in the number, structure and functions of formal organizations. Realization of the supremacy of human mind over the tangible and exhaustible organizational resources like money, material and machine has led to the concept of ‘human capital’, which is now being considered as the most critical organizational resource to ensure organizational effectiveness and efficiency. Analogously huge investments are going in towards servicing and developing this critical resource of human capital in organizations. In this context, the concepts of human resource development (HRD) and training assume greater significance. In fact, training has been considered as a potential tool for HRD since ages. However, as a distinct profession, and also as a critical management tool, training is still in its early years. At the same time, there have been significant changes in the way training is conceived, understood and practiced.

Raster transformations involve mathematical manipulation of raster layers to generate new raster images. These transformed raster images either contain the information of interest or highlight the features which are not discernible in the original image. Transformations are also performed to preserve the essential information in reduced number of dimensions or layers. In this chapter, we are going to discuss few most commonly used transformation tools listed below:

Introduction 
Renewable and more eco-friendly sources of fuel must be a major concern of our nation for the betterment of our environment because a growing population requires more energy. Fossil fuels have played a significant role in driving the advancement of society, economy, and development. Fossil fuels are the most used sources for the fulfilment of energy requirements. The predominant source of energy on a global scale is fossil fuels, which account for 88% of total energy production (Li et al., 2019). These sources are finite and depleting sources and have a significant negative impact on the environment through the emission of greenhouse gases, sulfur dioxide, nitrogen oxide, and particulate matter (Ritchie et al., 2023). These gases cause global warming by trapping heat, which causes climate change and its side effects, such as increased temperatures globally, more frequent and intense heat waves, and altered weather patterns (Solarin, 2020). In 2017, there was a 1.6% increase in CO2 emissions related to the combustion of fossil fuels, and this trend is anticipated to continue (Khoo et al., 2020). Fossil fuels, on the other hand, are non-renewable sources of energy that will deplete rapidly within fifty years (Chew et al., 2018). In an age marked by increasing environmental concerns and a growing urgency to combat climate change, the pursuit of sustainable and eco-friendly energy sources has never been more critical. Among the renewable energy options, biofuels have emerged as a prominent contender, holding the promise of reduced carbon emissions and a path toward a greener, more sustainable future (Takeuchi et al., 2002). Biofuels, derived from organic materials like trees algae, and waste, have attracted a lot of attention because they have the potential to lessen our reliance on fossil fuels and reduce the negative effects of climate change. Figure 5.1 shows the classification of biological feedstocks utilized in biofuels comprising four distinct generations: first, second, third, and fourth (Alalwan et al., 2019). Edible biomasses like sugar beet, corn, wheat, rice corn, etc come under the category of first generation. Since these feedstocks are in competition with food harvests for a specific quantity of land, fertilisers, and water, the viability of first-generation biofuels is subject to discussion (Paschalidou et al., 2016). Subsequently, the resources and energy utilised in the cultivation of feedstocks are inefficiently utilised, resulting in costly production. Furthermore, there exists a discourse surrounding the potential contribution of biofuel to the mitigation of greenhouse gas emissions (GHGs). This is because certain biofuel varieties may generate negative net energy gains, thereby increasing greenhouse gas emissions throughout the production process. However, the most contentious topic continues to be the "food versus fuel" dilemma.

3.1. GM or transgenic crop

Plant that has a novel combination of genetic material obtained through the use of modern biotechnology.

GM crop contains a gene(s) that has been artificially inserted instead of plant acquiring through pollination.

In 1994, Calgene’s delayed ripening tomato (Flavr-Savr) is first GM food crop.

The Secchi disc is named after its Italian inventor Pietro Angelo Secchi. Transparency is a water-quality characteristic of lakes and reservoirs and can be measured quickly and easily using simple equipment. This characteristic varies with the combined effects of colour and turbidity. Some variation may also occur with light intensity and with the apparatus used.
Procedure
1. Morning (early) or afternoon (late) is suitable time to check transparency
2. Lower the Secchi disc and observed the depth at which it just disappears from view (L1)
3. Then further lift up slowly till it just reappears (L2).