eChapters

4.1 Phases of technology transfer
To translate laboratory research into market ready product, it is important to understand steps or phases involved in this technology transfer process. The process typically includes six main phases, each with a different role (figure 9).
4.1.1 Research
Technology transfer begins with research, the critical stage of exploring and discovering novel knowledge, technologies, or innovations that may have potential commercial applications. The research phase can occur in academic institutions, research organizations, or private sector companies, often funded by public or private sources. Thorough research ensures that the technologies being transitioned are scientifically and technically robust, thereby increasing their potential for market success. Therefore, the research phase involves creating and evaluating new ideas, confirming their feasibility, and identifying IP prospects, all of which are key components of TT success.
4.1.2 Innovation disclosure
Innovation disclosure is the first formal step where the innovation is reported to the appropriate TTO or IP management team. This process ensures that the institution or organization recognizes the innovation and evaluates its potential for protection and commercialization. It includes following information:

Semiochemicals are chemical substances that mediate communication between organisms.

Classified into pheromones (intra specific semiochemicals) and allelochemicals (inter specific semiochemicals).

Phosphorus is essential for plant growth and is involved in important physiological processes, but its availability in soil is strongly influenced by soil chemical conditions. This chapter provides a systematic treatment of phosphorus management in irrigated soils. It begins with the functions of phosphorus and the classification of soil phosphorus into organic and inorganic forms. The behaviour of phosphorus in alkali soils is discussed along with phosphate fixation, which can substantially influence phosphorus availability to crops. The chapter examines the sources of soil phosphorus used by plants and the major types of phosphatic fertilizers used in agricultural production. Available and total phosphorus are distinguished, providing a basis for assessing soil phosphorus status. The behaviour of phosphate fertilizers after application is considered in relation to their efficiency and crop uptake. The residual value of phosphatic fertilizers is also discussed, highlighting the continuing contribution of applied phosphorus to subsequent crops. Overall, the chapter emphasizes efficient phosphorus management to improve nutrient availability, fertilizer-use efficiency and sustainable crop production in irrigated soils.

Physical Chemistry of Foods

    1.    Thermodynamics is primarily concerned with energy and entropy. Energy, also called internal energy (U), comprises heat and work; it is measured in joules (J).

    2.    Energy may be recalled that work generally equals force times distance (in N_·m = J) and that force equals mass times acceleration (in kg ·m· s^-2 = N).

    3.    According to the first law of thermodynamics, the quantity of energy, i.e., heat (q) work (p) potential energy, is always preserved.

    4.    Entropy (S)  is a measure of disorder; it is given by   
        S = K_B ln Ω
        Where K_B is the Boltzmann constant (1.38 ×10^-23 J × K^-1) and W is the number of  ways in which the system can be arranged, also called the number of degrees of freedom.

    5.    Colligative solution properties : The lowering of the chemical potential of a solvent by the presence of a solute causes changes in a number of physical properties: vapor pressure, boiling point, freezing point, osmotic pressure, etc. (the magnitudes of these changes all are proportional to the mole fraction of solute).

Abstract

The chapter aims at introducing selected physical properties of food and biological materials in food process and application in the field of food technology. These physical properties of food are not only used for designing of food equipments but can also maintain the nutritive value of food to a greater extent during processing in these equipments.

Introduction

The investigation of food engineering is spotlighted on the inspection of equipments and system used to process food materials on a commercial scale. Building of system for food materials can be efficient if two factors are known, the nature of the food product and what happen to the food during its processing. Food materials are organic in nature and it has a certain kind of qualities which recognize them from other processed food product. Since food materials are organic in nature, they have (a) shapes usually found in normally non regular; (b) properties which differ from other food products; (c) heterogeneous arrangement; (d) properties are varied due to climatic conditions, ripening conditions, etc. and (e) several other factors such as (e) influenced by chemical changes, moisture content variation and enzymatic movement. Managing food materials with these remarkable attributes requires extra thought, for the most part by implication and extra sources or reasons for different varieties. The attributes of a food material that are autonomous of the on looker, quantifiable, can be measured, and characterize the condition of the material (yet not how it accomplished that state) are considered as its physical properties.

Abstract

Physical properties of food are aspects such as colour, structure, texture, rheology and interfacial properties, and composition. We have a range of instrumental methods for objectively characterising and measuring food structure and physical properties. These are useful for applications such as new product development, benchmarking, reformulation and specification.

Colour

Consistent and accurate measurements of the colour and visual appearance of food products is extremely important. Various methods are available for colour measurement, allowing a wide variety of sample types to be measured. Colour measurement results are typically provided on the CIELAB scale. Others are available on request.

Abstract

Multi-commodity flours were prepared by blending rice flour, mung flour and potato flour with wheat flour in ratios of 0:0:0:100, 5:5:5:85, 10:10:10:70 and 15:15:15:55, respectively and packaged in glass jar, high density polyethylene and aluminium flexible packaging for biscuits development. The standardized formulations for biscuit had ingredients as 100 g flour/multi-commodity flour, 45 g sugar, 45 g hydrogenated fat, 1.25 g sodium bicarbonate, 1.25 g baking powder and 1.0 g curry leave powder. The biscuits were baked in convective baking oven at 180 > C for 10-15 min till baked. The well baked biscuits were removed from the oven, cooled to room temperature, packaged and stored under ambient condition. The physical quality (Mass, thickness, diameter, spread ration percent spread and bulk density), of biscuits were analyzed just after preparation under ambient condition. Results were also reported that the spread ratio of multi-commodity flour biscuits increased with decrease in the incorporation of wheat flour in multi-commodity flours. It is clear that spread ratio is mostly influenced by the diameter and thickness of biscuits.

2.1. Soil structure

Important physical properties of soils

Soil texture

Soil structure

Surface area

Soil density

Abstract

Fats and oils are one of the five essential ingredients of human diet and the others are protein, carbohydrates, minerals and vitamins. The oil seeds are major source of edible in world. Oils and fat form an important constituent of human food. Lipid metabolism generates many bioactive lipid molecules, which are fundamental mediators of multiple signaling pathways and they are also indispensable compounds of cell membranes. Many people in developing countries, especially children under five years of age suffer from acute or chronic protein and energy shortages. There is definitely a need for food production to keep pace with the increase in the number of the world’s population. Oilseed and nut should be properly dried before storage, and cleaned to remove sand, dust, leaves and other contaminants. All raw materials should be sorted to remove stones and moudly nuts. Some moulds, especially in the case of groundnuts, can cause aflatoxin poisoning.

Introduction

Oil has been a vital part of people’s regular dietary consumption all over the world and its usage has been found to increase several folds over the decades. The importance of using the appropriate oil for cooking goes a long way in affecting the consumer’s health. Improper methods of oil-aided cooking can lead to cardiovascular diseases and increased cholesterol in the blood (Kumar et al., 2018). There is definitely a need for food production to keep pace with the increase in the number of the world’s population. In order to achieve these national development strategies in many based economy tropical countries on agriculture and biased now towards increasing diversity of food products and consumer in order to alleviate malnutrition and pressure to strengthen and expand based industries on agriculture to ensure that their products are both healthy and safe. Oils and fats for food have used a variety of other applications since prehistoric times, and were easily isolate the source of the fats and oils found useful because of its unique properties.

Abstract

Four bread wheat varieties (PBW-138, PBW-299, PBW-343 and PBW-373), two of durum wheat (PDW-215 and PDW-233) and two of triticale (TL-419 and TL-1210) were milled to obtain 70 percent extraction flour.  The grains and the flour samples of all the varieties were evaluated for proximate composition, rheological properties and pretzel making. Physical properties of durum wheat were better followed by bread wheat and triticale. Durum wheat were harder, had higher grain weight than bread wheat and triticale.  Protein, ash, fat, total sugars and enzyme activity were higher in triticale flour than bread and durum wheat flours while durum flour had higher pigments (ppm, b-carotene). Bread wheat flour was intermediate between durum and triticale flours with respect to fineness. Rheological studies revealed triticale flour to be the weakest flour. Pretzels prepared by using optimized recipe and method revealed PBW-343 and PBW-373 best for pretzel making.

The physio-chemical properties of ice cream strongly influence its processing behaviour, texture, stability, and consumer acceptance. This chapter examines ice cream as a complex multiphase system and discusses important properties including overrun, density, viscosity, freezing behaviour, hardness, scoopability, meltdown, and fat destabilization. It explains how formulation and processing conditions influence these properties and how they relate to sensory quality. The chapter also considers quality-control tests used in industrial ice cream plants and identifies defects associated with physio-chemical imbalance. Understanding these relationships enables manufacturers to establish suitable product targets, diagnose quality problems, optimize formulations, and maintain consistency across different ice cream products.

4.1. Physiological disorders in field crops

Identification of physiological disorders in agricultural crops

Stress is force per unit area. When matter is subjected to stress; it may undergo changes in size, shape and displacement. Plants are grown in open environment and are likely to experience stress due to environmental conditions or when subjected to pests and diseases. The stress experienced by plants due to environmental conditions is called abiotic stresses. These include stresses caused by weather factors and climatic conditions and include moisture stress and thermal stress. The plants may also experience stress due to strong winds, dryness and as well as humid conditions (Fig.8.1).
The plants are generally classified into three types depending upon the ability to cope up with moisture stress as exhibited by-
• Drought resistance
• Drought tolerance
• Drought adaptations
The moisture stress may be to shortage of Water Compared to its requirements for evapotranspiration and metabolic activities. The plants may also suffer moisture

14.1 Introduction

The observation of phytosociology deals with the germination of growth on tree species in the industrial effluents. It shall be calculated germination potential based on germination capablility of the seeds. The growth parameters are measured then calculated leaf weight ratio, stem weight ratio, root weight ratio, top dry weight, sturdiness quatient, volume index and quality index. The following sub chapters dealing with formulae used to calculate the above parameters. The data so collected is then analyzed. The usual methods, which are employed in analysing the data, are averages, dispersion, skew ness, correlation, etc. The leaf weight ratio, stem weight ratio and root weight ratio are calculated by using the following formulae made by Kumaran (1991).

8.1 Introduction

In the modern world, the most elementary desire of every common man is to have sufficient food and mental peace. With the increasing world population, pressure on both peace and availability of food are continuously increasing. Advancing agricultural research can explore a possibility to feed to all living beings. Agricultural crops are highly susceptible to climatic conditions and crop productivity which are mainly influenced by extreme weather conditions; including temperature and water availability. In open field conditions, during long dry weather condition, soil moisture reduces and increases the transpiration.

Plants are very important to all forms of life on the earth because they consume carbon dioxide from the atmosphere and produce oxygen. In addition, plants make up the base of the food web. Basically, plants need five things in order to grow and these are: sunlight, proper temperature, moisture, air and nutrients. These five things should be provided by the natural or artificial environments where the plants live. If any of these elements are missing, they can limit plant growth. If any environmental factor is less than ideal, it limits the plant›s growth. People began putting plants indoor to avoid the damage from cold weather and this practice led to development of greenhouse. With the improvement in living standard and upgradation in agricultural technologies, off seasoned cultivation is also possible by providing desired artificial environmental conditions. The environmental stress weakens a plant and makes it more susceptible to disease or insect attack. In the modern engineering era, plant production systems have become more sophisticated. The desired climatic condition to grow plants and its control have changed from manual to automated digital operations and control computers have become faster and more capable.

Environmental control techniques are essential for protected cultivation and are not only for greenhouse’s cultivation but are also applicable to tissue culture and space farming as well. Environmental control in the present protected crop cultivation practices has been profusely supported by computer and sensor developments which is sometimes aslo called controlled environment agriculture.

Laboratory pipettes are classified by their method of liquid transfer. There are two types of pipette one is plastic which is made up of polystyrene and are essentially disposable and second one is glass pipettes are very resistant to chemicals. Glass pipette can be used frequently by washing, sterilising and dry heat sterilisation is also available. Some of the common types of pipettes are using in laboratory such as serological, volumetric, micropipettes, multichannel, and Pasteur pipettes. Serological and graduated pipettes are used for transferring various volumes, while micropipettes and volumetric types of pipettes are only considered for precise measurement and transfer. Multichannel pipettes are used for dispensing into multiple wells, and Pasteur pipettes are simple for transferring small amounts.
1. Serological Pipettes
• Also known as graduated pipettes, made of glass or transparent polystyrene they are calibrated with markings to measure and dispense varying volumes.
• Appropriate for cell culture applications, transferring liquids and mixing.
2. Multichannel Pipettes
• It is design to transfer multiple samples at once, often used for 96 well plates or pcr tubes.
• It can be manual or automated, with multiple heads for faster dispensing.
3. Volumetric Pipettes
• It is designed to supply for single and particular volume of liquid.
• Marked by single graduation for an exact volume, such as 1, 5, 10, 25, and 50 mL.
• Used in chemical reactions and analysis where accuracy is crucial.

Introduction

A planer machine is a commercial machine tool hired for transforming the metal blocks or metal workpiece into the desired calculated shapes by generating the flat surfaces on a workpiece. Similar to a shaper machine, a planer machine is used for forming flat surfaces on the work piece using the single-point cutting tool.Planer machines are generally hired for operation on the larger workpiece or metal structure (blocks) that cannot be achieved by the shaper machine. They generally have larger beds and larger reciprocating movements covering a greater working length and surface area as compared to shaper machines.

Planning

A greenhouse, is basically the purpose of providing and maintaining a growing environment that will result in optimum production at maximum yield. The agriculture in the controlled environment is possible in all the regions irrespective of climate and weather. It is an enclosing structure for growing plants, greenhouse must admit the visible light portion of solar radiation for the plant photosynthesis and, therefore, must be transparent. At the same time, to protect the plants, a greenhouse must be ventilated or cooled during the day because of the heat load from the radiation. The structure must also be heated or insulated during cold nights. A greenhouse acts as a barrier between the plant production areas and the external or the general environment.

Site selection and orientation

A greenhouse is designed to withstand local wind, snow and crop loads for a specific cropping activity. In this way, the structure becomes location and crop specific. The building site should be as level as possible to reduce the cost of grading, and the site should be well aerated and should receive good solar radiation. Provision of a drainage system is always possible. It is also advisable to select a site with a natural windbreak. In regions where snow is expected, trees should be 30.5 m away in order to keep drifts back from the greenhouses. To prevent shadows on the crop, trees located on the east, south, or west sides should be at a distance of 2.5 times their height.

This chapter introduces plant analysis as a means of determining crop nutrient status and diagnosing nutritional deficiencies. It explains the selection of representative plant tissues at suitable stages of growth, followed by washing, drying, grinding, digestion and elemental estimation. Recommended tissues and sampling stages are provided for cereals, pulses, oilseeds, fibre crops, vegetables, ornamentals and fruit crops. Procedures are included for estimating nitrogen, phosphorus, potassium, sulphur, boron, zinc, iron, copper and manganese in plant samples. The chapter stresses that reliable interpretation depends on correct tissue selection, careful sampling and freedom from contamination. It thereby connects laboratory measurements with crop nutrition and fertilizer management.

An ice cream plant is a highly interconnected operation in which quality, food safety, productivity, maintenance, cost, cold-chain performance, and business results influence one another. This chapter presents plant audits as management tools rather than simple compliance exercises. It provides a structured monthly audit system covering raw materials, production, quality assurance, hygiene, maintenance, productivity, cost control, warehouse operations, cold chain, documentation, and KPI performance. Department-wise scoring enables management to compare performance, identify weaknesses, prioritize corrective actions, and track improvement. The chapter also discusses common audit mistakes and best practices. A disciplined audit system strengthens accountability, reduces losses, improves operational control, and supports continuous improvement.