eChapters

8.1 Introduction

The concept of social justice led to a raise the standard of living of the masses. This is only possible by meeting the energy needs of industry, agriculture, transport and domestic use. The energy of demand has been increasing tremendously all over the world science mid – nineteenth century due to rise in industrial and agricultural activities and was being met to a great extent by fossil fuels.

Three factors led the mankind to look for alternative renewable sources of energy like solar, wind, hydro etc. (1) there is a danger that the rate at which the non renewable sources of energies are being consumed presently may lead to a global shortage in the near future. This has already happen in case of oil. (2) Use of fossil fuel involves emission of toxic gases polluting the environment causing health hazards of living being. and (3) the demand and supply gas of energy is continuously widening, thus necessitating to exploit renewable sources of energy.

Out of various renewable energy sources, solar energy has been a promising one and lot of development has been taken in its technology for various uses. The numbers of technology engaged in developing solar energy for meaningful use are aiming to achieve the following objectives-

7.1 Introduction

Energy has become a critical input for the economic development of the India because of the wide spread scarcity of oil and electricity and other commercial form of energy.

The rural areas are often the worst affected because of these shortages and the rural population continues to depend on the inefficient non-commercial energy from like fire wood, cow dung, human and animal for meeting their energy requirement for subsistence, production and devolvement needs.

The rural energy crises or “The energy crisis” has been getting increased attention from the policy makers to tackle the problem in a planned and integrated manner.

The rural energy sector is concerned with two major planning issues.

1. Provision of energy for meeting substance needs for cooking, heating and lighting of the rural areas of the country. This problem is also directly linked to the problem of deforestation and environmental destruction being caused in the rural area because of indiscriminate and wide spread use of non conventional energy sources.
2. Meeting energy requirements for production activities which would create employment and productivity in rural areas.

6.1 Introduction

Energy planning is possible only with knowledge of past and present energy consumption and future energy demand. There are number of factor which affects the energy consumption pattern significantly. These include energy prices, availability, reliability of supply, uniformity of quality, convenience in use, technical and economic characteristics of energy using equipment & appliances, population growth, income rate of urbanization, educational status, social acceptance, social habit, present knowledge of beneficiary etc.

The energy planning differ in planning sectral wise and planning sources wise. For sector planning purposes, estimates are needed of the short and long run price elasticity for every specific energy resource. Where as in planning sources wise, one must consider its long term availability & its costs.

In general, to cope up future risk and uncertainty, we need to predict the future event. The likely future event has to be given from and content in terms of projected course of variables i.e. the forecasting. Projection is of two types – forward & backward. It is the forward projection of data variable, which is named as forecasting.

These three requirements are required to be followed in sequence for getting maximum benefits. However, integrated rural energy concept is a new area of work and not much experience is available in this field as compared to other rural development activities. It is difficult to give any guidelines for planning. One can only recommend approaches and not solutions to planning.

The rural area in developing countries are almost always rich in one or another sources of energy, which could be used separately or in combination with other sources in decentralized small scale units, or even on a household scale. Thus, the problem is one of good planning, management and a strong educational and promotions campaign, rather than the non availability of resources or the lack of technology. Further, after planning, prefect development of device and their effective operation is required.

The purpose of the Integrated Rural Energy Planning project should be clearly defined. It may design either for research and development or demonstration for Popularisation of system, education and training, promotion, health or combination of these.

It is usually better to start with a small size to gain experience and build up confidence before undertaking the large scale project. As defined earlier, one of primary requirement of Integrated Rural Energy Planning is to develop energy demand pattern, energy supply system and optimally match demand with supply.

4.1 Introduction

The energy census survey has become the basis for planning & implementation of the village development based on conventional and non conventional sources which are appropriate to the local needs. The continuous and widespread use of non commercial sources of energy in the rural area is resulting in the large scale destruction of the environment. While the rural people get non conventional fuels at almost zero private cost, the social cost for meeting their energy needs has been increasing over the year. Hence the non conventional fuels acquired a special significance in the energy context.

The rural energy problem is multi dimensional & needs to be tackled through a multi dimensional integrated approach which would include augmentation of energy supply resources, technology transfer for optimum & productive use of resources, R & D inputs in particular for developing low cost energy options for the rural poor, education & training for rural users, linkage with various rural development programmes including village & small scale industries programme and adequate institutional & financial support. The multi dimensional approach for making a village self sufficient in energy planning is illustrated in Fig.4.1.

3.1 Introduction

There is now latest national thinking going on to conserve the known sources of energy such as firewood, cow dung, agricultural waste, kerosene, oil etc. i.e. by limiting their conventional uses and to propagate the use of non conventional energy especially in the rural area. The large scale indiscriminate use of non commercial fuels fully in the rural areas are not only providing to be inefficient but also inadequate to cope with the growing rural energy demand caused by growing population and growing consciousness among rural people for a better way of life. Planned input of energy are, therefore urgently require to protect the environment and to cope with raising rural energy demand. In order to assess the widening gap between the supply and demand of commercial energy and indiscriminate use of non commercial fuels in rural areas, there is a need for various types of statistical or quantified information to be collected and analyzed in an objective manner and presented suitability so as to serve as a sound basis for taking policy decision to make an optimum utilization of commercial energy in a balanced manner. This will require conducting of survey in areas to be covered.

The statistical data may be collected by complete enumeration or by a sample survey. The earlier method is very cumbersome, time consuming, cost ineffective and requires an intensive development of manpower, if domains of study is quite large. Complete enumeration and sample surveys presuppose the existence of a certain minimum of facilities such as funds, professional personnel for planning the survey methodology and supervision of field operations, sufficiently qualified enumerators, sampling frames, machine tabulation equipment, transport and communication facilities etc. These facilities or combinations there of do not always exist to the extent needed for a complete enumeration survey. As such, sample survey is preferred to complete enumeration for ethic type of studies giving due importance to sampling error.

In the integrated energy planning, there is an objective to find out the present consumption pattern of energy for different end uses, shortages being experienced and people’s reaction to using alternate sources of energy is also enumerated.

The survey methods determine – incident, distribution and the interrelation among sociological variable and psychological variable. The sociological variable s consists of age, education, income and attitude, behavior, motivation, belief and knowledge about the problem.

2.1 Introduction

Energy is one of the main input for rural development and economic development. The greater part of the world population lives at low standard and a quarter of the population or about 1.5 billion, have an extremely low standard of life. Energy is one of the essential requirement of the quality of life the people. The industrial development or even large scale food production, water supply, textile manufactures & construction of building and other recreation items are not possible without adequate supply of energy. Therefore, one of the most important tasks is to provide adequate, reliable, convenient and efficient supply of energy, if quality of life of the people is to be raised from its present level of grinding poverty. Table 2.1 project the global primary energy supply in six scenarios i.e A1 - its strong emphasis on oil and natural gas use. A2 - which is coal-intensive. A3 - which emphasises the roles of natural gas, new renewables and nuclear in averting serious problems from emissions. B - Middle course. C1- with its emphasis on energy efficiency improvements, new renewables (especially solar in the longer run), but with nuclear power phased out by 2100 because unable to satisfy its critics and C2 - where nuclear power plays an expanding role.

1.1 General

Access to energy is a crucial enabling condition for achieving sustainable development. Prudent energy policies and research can play an important role in steering both industrialized and developing countries onto more sustainable energy development paths. Specifically, they can strengthen the three pillars of sustainable development: the economy, by boosting productivity, social welfare, by improving living standards and enhancing safety and security, and the environment, by reducing indoor and outdoor pollution and remediating environmental degradation.

1.2 Energy and it’s Requirement

Energy in any form is necessary to meet many of our requirements. It’s varying definitions shows the importance of energy in our life.

Abstract

Agriculture is the major sector for the livelihood of the billions of people worldwide. Increasing population and decreasing arable lands are the major concern for the fulfillment of the desired food production. After green revolution more production in the crop is obtained by worldwide. Several insects and pests are responsible for the inhibition of desired production in agriculture. Therefore, pesticides play a major role in the control of destructive insects and pests. After ban of organochlorine pesticides, organophosphorus pesticides has been used vigorously. Beside the effective pest management in agriculture, residual organophosphorus pesticides are more lethal for human and other living creature. Monitoring of these compounds is very much essential in the food and agricultural samples. Chromatographic techniques are well adopted techniques for the hundreds of residual pesticides. Introduction of various analyzers in chromatographic techniques improve the monitoring of the residual pesticides from different samples. Therefore, recent advancement in residual pesticides isolation and chromatographic techniques has been discussed in this book chapter.

Abstract

We are very fortunate to be born in a nation which is blessed with awesome decent variety of natural products, fruits, vegetables, cereals, pulses and so forth. The population of India expanded consistentlythat cause a genuine sustenance and shelter problem. The supply of food is not adequate to fulfill the demand of the consumers. This shortage of food is the root for adulteration of foodstuffs by the traders. Food adulteration is a procedure in which the nature of sustenance is brought down either by the addition of inferior quality material or by extraction of valuable ingredient. An adulterant is a chemical substance which should not be contained within other substances (food, beverages) for legal or other reasons. The addition of adulterants is called adulteration. Food is adulterated to increase the quantity and make more profit. The food is sucked of its nutrients and the place where the food is grown is often contaminated. For instance: milkis mixed with water. Vanaspati is utilized as an adulterant for ghee. Adulteration of food is unsafe as it may be toxic and causes serious health hazards to the consumer. To evade this issue government has passed an act which is known as preservation of Food Adulteration Act. It covers security from risks involved due to contamination of poisonous elements. Instead of government efforts the informed and aware consumers will have the capacity to dispense with this issue. So, here in the chapter adulterants their types, effect on human health, laws and control measurement were reviewed and discussed.

Abstract

Consumers increased response to new products with high sensory, organoleptic and nutritional potentials has impelled a search for new substitutes to processing methods. For several years, thermal processing was the main technology for producing safe products with long shelf lives, although in most cases losses of fresh flavors, vitamins, and some physicochemical characteristics were the price of safety and long-term stability. Pulsed electric field (PEF) processing as a non- thermal technique has been proven to inactivate microorganisms with minimal losses of flavor and food quality, possibly making it the answer to present-day consumer demands. In addition, the low processing temperatures used in this non- thermal technology allow the process to be nutrient preserving, energy efficient, which translates into lower costs and fewer environmental impacts. In this chapter, the the configuration of various PEF equipment, their electric configuration and recent application of this technique in processing of foods have been discussed in detail.

Abstract

Ghee means the pure clarified fat derived solely from milk or curd or from desi (cooking) butter or from cream to which no coloring matter or preservative has been added. It is the second largest dairy product prepared from milk and it is almost 35% of total milk production. Unfortunately, the producers or the middle- men involved in the ghee trade, tend to adulterate ghee with cheaper oils and fats like vegetable oils, animal body fats, hydrogenated fats and sometimes even the non-edible mineral oils, especially during lean season to earn more money. Recently, the problem of adulteration has assumed a very serious dimension. Such a situation has tarnished the image of dairy industry. Methods presently adopted by food law enforcing agencies to ensure the quality of ghee are mainly based on the physico- chemical constants, but all these methods have some limitations. So researchers are always in search of different innovative methods to check the quality of ghee.

Abstract

Tremendous hike inworld population has increased thrust on the limited resources which has considerably affected the viability of the food. The emerging challenge for policy makers and food scientists is to put forward viable solutions. Utilization of underutilized crops/plants that act as good sources of starch could be explored in a better way for the sustenance of the limited sources like food crops/plants. The demand for starch and the foods containing starch has been increasing continually. Since, the starch in its native form has certain limitations in its functional properties to be used for different applications. Therefore, it becomes important to explore certain technologies which could be used for modification of starch. Among different technologies gamma irradiation ensures food safety while inducing physicochemical changes of the components. Although, the chemical modifications have been used widely so far but the concerns related to the chemical residues left are diminishing their demand. Hence, the physical processes particularly the gamma irradiation process has emerged as an efficient alternative with some benefits over other process like eco-friendly, economical, reliable and safe for altering the physico-chemical and biological characteristics of the product. Gamma Irradiation of starch has been successfully employed for the achievement of some desired physico-chemical, biological and functional properties of the foods and other related items. In this chapter, valuable impact of gamma irradiation on the physico-chemical, biological and functional properties of starch has been summarized.

Abstracts

To ensure safe food and adequate sanitation programs, the equipment used for processing of food products must be designed, fabricated, constructed, and installed according to sound hygienic design principles. This ensures the equipment can be adequately cleaned and sanitized, and that surfaces are resistant to daily exposure to corrosive food products and cleaning/sanitizing chemicals. This chapter focuses primarily on fundamental principles of hygienic design, which protect the product from microbial, chemical, and foreign-body contamination. This is followed by a discussion of general aspects of hygienic construction and design of food equipments, the selection of materials of construction and specification of surface finishes, fabrication, installation and cleaning and sanitization. Quality of raw materials or foods ingredients, proper processing, packaging and storage of finished products decides the quality of the food products. Planning for plant and equipment layout, its design, services (water, air, refrigeration, steam), waste disposal etc. are some of the critical factors, which contributes to quality. In addition, the food processing equipment must comply with strict standards and regulations, which are necessary for securing the quality and safety of the food products to the consumers.

Abstract

Micronutrient (vitamin and mineral) deficiencies affect more than 2 billion people worldwide and are especially prevalent in developing countries including India. Conditions due to vitamin mineral deficiencies account for 7.3 percent of the global disease burden.Iron deficiency (anemia), vitamin A and iodine deficiency disorders continue to be a grim public health problem. Thus, elimination of vitamin and mineral deficiencies is essential to improve the overall health of the masses as well as to sustain economic growth and national development. Food fortification is an effective intervention to deliver vitamin and mineral rich foods to large populations. In addition to the prevention of vitamin and mineral deficiencies, food fortification is an effective measure to raise vitamin and mineral levels by moving the population towards consuming recommended dietary allowances for most micronutrients-making it a long–term and a sustainable strategy. India is the largest producer of milk in the world with 146.3 million tonnes and the consumption rate of milk and milk products by all age groups of people are high.Therefore, fortification of milk with mineral and vitamins could be a safe and effective strategy to fight these micronutrient deficiencies.

Abstract

Nutrition and genetics both have very crucial role in human health and in development of chronic diseases such as cancer, osteoporosis, diabetes and cardiovascular diseases. Difference between individuals in response to dietary intervention is a well-known phenomenon in nutrition research (Ordovas, 2008).The effect of dietary changes on phenotypes such as blood cholesterol, body weight and blood pressure can differ significantly between individuals (Ordovas et al., 2007). Various bioprocess i.e. ingestion, absorption, digestion, transport, metabolism and excretion of nutrients and food bioactive components in human body is carried out through proteins such as enzymes, receptors, transporters, ion channels and hormones. Genetic variation leads to altered production and affect functional properties of these proteins. Furthermore nutritional efficacy is also different among different individuals which might be affected by nutritional status. Thus diet and gene expression are interrelated and have a mutual effect on physiology of human body.

Abstract

Probiosis has emerged in the early 20^th century after Ellie Metchnikoff proposed his hypothesis that organisms were reponsible for longivity of ethnic people of Balkan region of Russia and ever since it has grow into a major scientific field which has its applications extending into farming, aquaculture and prophylactics in humans. Vast research was carried out on this topic and Lactobacillus sp. and Bifidobacterium sp, are the two important genus that are highly studied and widely recognized universally as conventional probiotics. Apart from these two genus there exists many other bacterial species which have shown promising probiotic potential. Such non conventional probiotics are widely used in some parts of world as commercial food products with health beneficial effects, pharmaceutical products or being tested for their safe utilization in human beings. The present chapter tries to covers some genera and their potential and application in prophylactics.

Abstract

Chitin has been ranked at second position after cellulose as the most abundant natural biopolymer. Chitin has similar chemical structure to that of cellulose with 2-acetamido-2-deoxy-b-d-glucose (NAG) monomers attached via ß (1–>4) linkages. Chitosan is the deacetylated (to varying degrees) form of chitin, which, unlike chitin, is soluble in acidic solutions. Therefore, Chitosan, a copolymer of glucosamine and N-acetyl glucosamine, is amongst the most copious biopolymers on earth and finds wide range of biomedical and industrial applications. It has been approved in 1983 by USDA as a feed additive. Chitin basically is obtained from prawn/crab shells and chemical treatment of chitin produces chitosan. Since supplies of seafood waste are seasonable and variable, so fungi can be used as alternative source for chitosan. The unique physicochemical properties of chitosan provide great potential of its utilization in food industry especially dairy industry such as production of dairy products, dairy waste water treatment, extension of shelf life of dairy products etc. In recent years, exotic synthetic compounds are losing their appeal, thus application of chitinous products in dairy as well as processing aids has received considerable attention. The modified chitosan with greater functional properties has increased application in different dairy foods. This chapter focuses on the fundamental uses of chitosan and their derivatives in a variety of dairy industry applications.

Abstract

Meat is considered to be a highly perishable food commodity because of its biological composition. Thus, to extend its shelf life and maintain its nutritive value, there is an urgent need to find out alternatives for synthetic anti-microbial and anti-oxidants. This will not only serve the purpose of meat product manufacturer’s but will also satisfy the consumers’ demand for minimally processed meat products devoid of synthetic preservatives. This review discusses the natural antimicrobial and anti- oxidants sources viz., various essential oils, their composition and application in different meat and meat products. Essential oils from basil, rosemary, thyme, oregano, ginger, basilica, balm, coriander, rosemary and clove have exhibited a better potential to be used as an antimicrobial agent in meat and meat products. They owe their anti-microbial properties to the phenolic compounds present in them. They dislocate cell membrane and disrupt functionality of bacterial cell membrane and eventually leading to the release of intracellular components. However, essential oils are not widely used due to the pungent and intense aroma imparted to the food, thus there is still need to work out on the novel technologies which can not only increase food shelf life but at the same time, are sensorially acceptable to the consumers.

Abstract

Agro-food industries generate a large amount of by-products and wastes. These byproducts and wastes have a negative impact in terms of the environmental concern due to the increase of pollutant disposal, and industrial sustainability because of high costs related to their management. These byproducts and wastes are rich in minerals, sugars and proteins. The composition and characteristics of wastes from different food processing industries vary and rely upon the production technique and the nature of the product. India is the second largest producer of rice/paddy in the world and the utilization of rice bran is gaining importance. However, a small fraction of these have been utilized. In case of fruits and vegetables, industrial processing of potato generates between 70 and 140 thousand tons of peels worldwide annually. Moreover, 37% of world’s total annual production of banana is shared by India. Hence, to minimize the disposal fees and trash collection new policies and methods have been developed for handling and treatment of wastes and byproducts. This chapter envisages the status of different agro-food industrial byproducts and wastes for the development of different food and non-food products.