eChapters

Apiculture, or beekeeping, is a key contributor to the development of sustainable and eco-conscious farming systems. In the context of natural farming, where synthetic inputs are avoided, bees serve a dual purpose—as vital pollinators and as indicators of ecological well-being. Incorporating bees into such farming systems improves crop yields through efficient pollination and offers an additional source of income from honey and other hive-based products.

Natural farming promotes the peaceful coexistence of all living beings. Bees, as crucial players in preserving biodiversity and ecological balance, embody this principle. In contrast to conventional beekeeping, which may depend on artificial feeding, chemical treatments, and synthetic hives, natural beekeeping uses traditional, minimal-intervention practices that respect the bees’ natural instincts and life cycles. This ethical model emphasizes care for the colony over intensive honey harvesting or manipulation of the queen bee.

In natural beekeeping systems, the management of pests and diseases focuses on prevention, ecological harmony, and chemical-free practices that safeguard both bee health and environmental integrity. Departing from conventional methods that often depend on synthetic antibiotics, fumigants, or miticides, natural approaches aim to fortify the colony’s inherent resilience through biological and culturally grounded techniques. Central to this strategy is the maintenance of strong, genetically robust colonies, ensuring clean and well-aerated hives, and providing nutritional support through diverse and abundant floral sources. Healthy, wellnourished colonies are inherently more capable of withstanding infections and parasitic invasions.

Indian apiaries commonly contend with pests such as wax moths, ants, wasps, small hive beetles, and mites like Varroa destructor and Tropilaelap sclareae. Diseases including American foulbrood, European foulbrood, chalkbrood, and Nosema can pose significant threats if not identified and contained promptly. Natural management emphasizes routine hive inspections to detect early symptoms, followed by the removal and safe disposal of infected combs. Maintaining adequate space between colonies can minimize disease transmission, while structural modifications to hive entrances and the use of barriers like ash rings or water moats effectively deter ants and other intruders.

Queen rearing and colony multiplication are central to sustainable and independent beekeeping, especially within the principles of natural farming. The queen bee serves as the core of the colony—ensuring reproduction and maintaining social cohesion through pheromonal signals that influence the behavior and unity of worker bees. A robust and fertile queen guarantees a consistent brood cycle, appropriate worker-to-drone ratios, and overall colony health. In natural systems, queens are raised without artificial grafting or chemical interference, allowing bees to follow their innate biological instincts.

Queen rearing occurs naturally through swarming or supersedure. During swarming, the old queen departs with a group of workers to establish a new colony, while the original hive nurtures a replacement queen. Supersedure takes place when bees sense the current queen is aging or weakening and raise a successor. Natural beekeepers can work in harmony with these processes—observing and supporting the development of queen cells, transferring brood or queen cells to new hives, and letting the colony follow its own cycle of renewal. This method enhances genetic strength and colony resilience.

Ichthyology: Science dealing with the study of fishes – a class of aquatic vertebrates most of whom depend for respiration exclusively on oxygen dissolved in water (Gr. ichtys = fish + logos = study).

Idiobiont: A parasitoid that prevents its host from developing any further, by paralysis or death; see also Konobiont.

IGR: See insect growth regulator

Ileum: The second section of the hindgut, preceding the colon differentiated region of the anterior intestine of the hindgut preceding the rectum in some insects (Fig. 120).

Imaginal buds: See imaginal disc.

Onion is an economically significant bulb crop cultivated across diverse agroecological environments. Its cultivars vary considerably in bulb size, shape, colour, pungency, maturity, storage behaviour and photoperiod response. Understanding its vegetative and reproductive morphology, growth habit, physiology and taxonomic relationships is fundamental to crop improvement and germplasm conservation. This chapter examines the botanical features and taxonomic position of onion within the genus Allium. It explains relationships among cultivated types, landraces and allied species and discusses varietal classification according to climatic adaptation and consumer preference. Classical characterization and molecular taxonomy are considered important tools for developing productive, resilient and market-preferred onion cultivars.

Objective synonym: An absolute or nomenclatural synonym resulting from the proposal either of a replacement name for a supposedly preoccupied name or of names based on the same specimen, illustration, or taxonomic entity (cf. Synonym, Subjective synonym).

Obligate parasite: A parasite that requires a living host to survive and reproduce and which cannot exist in any other way.

Obligatory: Compulsory, or exclusive; e.g. obligatory diapause is a resting stage that occurs in every individual of each individual of each generation of a univoltine insect.

Oblique sternals: Lateral abdominal muscles in other than longitudinal or dorsal-ventral orientation

Conventional fertilizers often exhibit low nutrient-use efficiency, resulting in nutrient losses, soil degradation, water contamination and unnecessary production costs. Nano-fertilizers offer controlled and targeted nutrient delivery through formulations engineered at the nanoscale. Their high surface-area-to-volume ratio can improve nutrient availability, plant uptake, growth, bulb quality and storage performance while reducing conventional fertilizer requirements. This chapter explains the nature, modes of action and potential benefits of nano-fertilizers in onion production. It also considers nano-biofertilizers, smart nutrient-delivery systems and nano-sensors. Particular attention is given to manufacturing cost, nanotoxicity, effects on soil microorganisms, farmer accessibility and the need for standardized safety and regulatory frameworks.

Precision farming manages spatial and temporal variability within fields through targeted, data-driven interventions. Onion is particularly suited to precision management because its productivity and quality are sensitive to moisture, nutrients, environmental stress, pests and diseases. This chapter describes applications of GIS, GPS, variable-rate technology, IoT, cloud platforms, drones, remote sensing, multispectral imaging, smart sensors, artificial intelligence, automated systems and crop-response models. These technologies support soil assessment, field preparation, irrigation, fertilization, crop monitoring, stress detection, protection, yield estimation, harvesting and storage. Their potential to reduce input waste and improve profitability is considered alongside constraints involving investment costs, technical knowledge, connectivity, accessibility and data privacy.

INTORDUCTION

Spices are strongly flavored aromatic substances of plant origin which are commonly used for seasoning, cooking food and for preserving other food stuffs. There are about 70 species of spices grown in various parts of the world. Those which are used most commonly throughout the world are grown in India and other parts of South Asia.

The seed spices are annual herbs, whose dried fruits or seeds are mostly used as spices. The seed spices are used for culinary, confectionary, perfumery, cosmetics and pharmaceuticals industry. There are about 20 seed spices grown in India (Table 1) and nine out of them are prominent. The most important among them are belongs to family Apiaceae (coriander, cumin, fennel etc). about 9 lakh ha area is growing in seed spices in the country with annual production of about 5-6 lakh tones (Anonymous, 2003). India is the world’s largest producer, consumer and exporter of seed spices. The foreign exchange earned through export of seed spices is more than Rs 200 crores annually. India exports raw spices as well as value added items to nearly 70 countries in the world and is meeting 51% of the global demand of these commodities. There is good potential for increasing export of seed spices, if production as well as quality is increased. The level of productivity in various seed spices is comparatively low as compared to other countries. There are many production constrains attributed to low productivity. The lake of suitable high yielding varieties suiting to different agro-ecological regions and more incidences of diseases and insect pests. Among different insect pests, coriander aphid, Hydaphis coriandari (Das) is one of the most destructive and widely distributed pest of coriander (Jain, 1984 and Jain and Yadav, 1989). Recently brown wheat mite was observed attacking coriander and other spices (Jain and Yadav, 1986 and 1989).

Introduction

Plant protection in India is mainly based on use of pesticidal chemicals. Chemical control is one of the effective and quicker methods in reducing pest population where farmer gets spectacular results within a short time. However, indiscriminate use of pesticides results in a series of problems in the agricultural ecosystem mainly the development of resistance in insects to insecticides, resurgence of treated population, environmental contamination and residue hazards. Destruction of natural enemies of insect-pests, expenses on pesticides etc. contributed to a new way of thinking concerning pest control practices i.e. integrated approach of pest control. IPM was first proposed by Stern and his collegues for integration of biological and chemical control measures. This is not altogether a new concept; it was practiced before the advent of modern chemicals. The date of sowing the crop were carefully studied to ensure that crop was not being planted when it would encounter severe pest problems, cultural practices such as ploughing after harvest, timely weed control, well timed irrigation and reduced use of fertilizers all contributed to reduce pest population. Most of these methods were curtailed when modern pesticides become available it was thought that these chemicals alone could control pests, but now we know that this is not possible and a single method of approach in pest control is not feasible. An integrated approach of pest management (IPM) was devised on the principles of managing the pest rather than eradicating them. IPM is a broad ecological approach for managing pest problem encompassing available methods and techniques such as cultural, biological, mechanical and chemical in a compatible manner to reduce and maintain the pest problem below the economic injury level.

Quantification of DNA is an essential step after its extraction in conjunction with the confirmation of the quality. NanoDrop spectrophometer is a powerful instrument in determining both purity and concentration of nucleic acids on the basis of absorbance values obtained by adding small amount of sample (1-2 μl) on the measurement surface.

Principle: The instrument works on the basic principle of spectrophotometry, which takes highly sensitive fluorescent measurements of the microvolumes. It takes use of microvolume sample retention technology based on surface tension property of the liquid and fibre optic technology. Together, these features make it possible to detect sample even in microlitres, which is much more than the traditional method that need cuvette-sized sample volume. The concentration of nucleic acid sample is normally determined by measuring its absorbance at 260 nm.

1.1 Introduction

The human population is growing rapidly at an alarming rate, disproportionately to the production of food supplies, which will necessitate production of more food in the near future. The human population has already crossed the 7 billion mark and is expected to rise over 8-10 billion by 21st century. More than 800 million people are reported to suffer from malnutrition (Matson et al., 1997).  Thereby necessitating the need for more food production. Presently, agriculture faces the double challenge of feeding a fast growing population and at the same time prevents the degradation of the agricultural resource base. There appear to be two options for developing countries; either to improve agriculture through modernization, by emphasizing pesticides, fertilizers, machinery and modern varieties of crops; or use sustainable agriculture, promoting improved traditional, small-scale techniques (Pretty, 1999).

22.1  Introduction

Plant pests have been part of man’s environment for a long time. Traditional agriculture, which included diverse crops and indigenous crop management practices, provided little opportunity for pests to build up and spread rapidly (Smith and Allen, 1954). Crop production is constantly threatened by increasing difficulties in controlling insect pests, which are a major impediment to improved livelihoods of poor farmers. However, in the quest to increase food production for the growing population, use of pesticides became a norm in crop management. Pesticides became an integral part of the process owing to losses from weeds, diseases and pests reducing the harvestable produce. Use of pesticides along with high yielding varieties, irrigation and improved seed did result in increased productivity. But the rampant use of these chemicals, under the adage, ‘if little is good, a lot more will be better’ has played havoc with human and other life forms.

Like other sciences, the insect–pest management research is also based on scientific methods requires formulation of hypothesis from observed facts through logical arguments which in turn, verified through objective methods. For instance, in integrated pest management the entomologists are primarily concerned with the estimation of insect-pest population, its distribution pattern over time and space, its relationship and fluctuation in population with the effect of weather parameters and ultimately its control measure through the judicious use of chemicals, biological control agents and resistant varieties etc. Two major practical aspects of scientific investigation are as 
    ·    collection of data and 
    ·    interpretation of the collected data.

Introduction
 
Natural control strategies that employ biological agents for pest suppression are generally classified as biological control tactics. In conventional usage, this term usually refers to the practice of rearing and releasing natural enemies:   parasites, predators, or pathogens. A slightly broader definition of “bio-control” includes any related management activity that is designed to protect or conserve natural enemies. Biological control is the use of living organisms to maintain pest populations below damaging levels. Natural enemies of arthropods fall into three major categories: predators, parasitoids, and pathogens (Altieri et al., 2005; Mahr et al., 2008).

4.1 Introduction
Companies that produce tangible items or offer services must drastically increase their productivity in order to maintain their operations in the face of intensifying global competition. A single quantum jump productivity enhancement technique or multiple concurrent incremental improvement productivity strategies can both be used to achieve this goal. If a business chooses the second choice, integrating various tactics for a significant increase in the total productivity would be quite difficult. The first alternative, a single productivity improvement plan, will make it possible for the business to increase productivity with the same or greater success. The only difficulty with this strategy is locating the probable problem area and then using process improvement techniques to achieve the anticipated dramatic increase in productivity. Business process reengineering refers to any significant adjustment of business processes that results in a dramatic increase in an organization’s productivity. Price, quality, after-sales support, adherence to delivery schedules, technological breakthroughs, etc. are some elements that influence market competition. Therefore, the business should focus its efforts on each of these areas in order to achieve notable improvements in terms of decreased operating costs and higher sales revenue from the sale of its goods and services to clients. Improved pricing for a company’s goods or services can provide it an advantage over competitions. Applying various cost-cutting strategies to lower variable costs and overhead costs will lower the price of the good or service. The other elements, viz. quality, after-sales support, delivery schedule adherence, and technological advancements are all directed in this direction

4.1    Essential Plant Nutrients
    Macronutrients
    1. Nitrogen
    2. Phosphorus
    3. Potassium
    4. Calcium
    5. Magnesium
    6. Sulphur
    
Micronutrients
    
    1. Iron
    2. Zinc
    3. Boron
    4. Manganese
    5. Molybdenum
    6. Chlorine
    7. Nickel
    8. Sodium
    9. Cobalt
    10. Silicon

Climate and weather strongly influence annual fluctuations in agricultural insect-pest populations. As ectothermic organisms, insects respond rapidly to variations in temperature, humidity, rainfall and wind. Climate change can modify their development, survival, reproduction, adaptation and geographical distribution. It may increase the number of generations, improve overwintering survival, alter host synchronization, encourage invasive species and reduce the effectiveness of natural enemies and existing control methods. Indirect effects also occur through changes in host-plant growth, resistance and nutritional quality. This chapter examines the responses of important agricultural insect pests to changing climatic conditions and discusses their implications for crop productivity and sustainable pest management.

Pesticide use in agriculture has evolved at several stages in the last few decades. Pesticides, as defined by the FAO, are any substance or mixture of substances intended to prevent, destroy, or control any pest, including vectors of human or animal disease, unwanted species of plants or animals causing harm during or otherwise interfering with the production, processing, storage, transport, or marketing of food, agricultural commodities, wood and wood products, or animal feedstuffs, or substances that may be administered to animals. A plant growth regulator, defoliant, desiccant, or agent used to thin or prevent premature fruit fall, as well as substances applied to crops before or after harvest to prevent them from deteriorating during storage and transportation, are included in this category.

Today’s agrochemistry has a massive challenge: ensuring the availability of high quality active ingredients to enable long-term control of pest species, weeds, and agricultural diseases. The differential uptake and transfer of the active ingredient by target and non-target organisms can contribute to diverse biological activity.

Climate change is increasing the likelihood that invasive insects will establish, spread and cause economic damage in new geographical regions. Invasive species commonly possess high reproductive capacity, broad host ranges, environmental tolerance, ecological adaptability and competitive advantages. Rising temperatures and changing humidity and rainfall patterns can create favourable habitats beyond their traditional ranges. Extreme weather and global trade may further support their movement and establishment. Once introduced, invasive insects can compete with native species, disrupt ecosystems and cause serious crop losses. This chapter examines the relationship between climate change and invasive insect pests and emphasizes early detection, quarantine, surveillance, forecasting and coordinated management.