eChapters

Proper selection of a fungicide and its application at the correct dose and the proper time are highly essential for the management of plant diseases. The basic requirement of an application method is that it delivers the fungicide to the site where the active compound will prevent the fungus damaging the plant. The fungicidal application varies according to the nature of the host part diseased and nature of survival and spread of the pathogen. The method which are commonly adopted in the application of the fungicides are discussed.

1.Soil treatment

2.Seed treatment

3.Foliar or vegetative application

1. Detection means the existence of whatever do you want detecting but diagnosis is that the analysis in depth of existing thing.
2. Objectively look for, listen to the credible complains, symptoms that is sometimes not visible at all.
3. It is art or skill of identifying some abnormalities, i.e. which is below or higher than the normal permissible range/threshold.

The Food and Agriculture Organization (FAO) estimates that up to 40% of food crops are lost due to plant pests and diseases annually. Such losses not only threaten global food security but also have the potential to limit food access due to unavailability of food, or sharp increases in food prices. But this challenge is also an opportunity to find new ways to help crops better withstand adverse conditions in a farmer’s field.

Since commencement of the settlement of world, the search for food had been uppermost, thereby, practising the conservation of food is a basic need for ensuring its ample supply to human being. The problem of food storage is growing fast day by day with the increase in the population. The existing shortage of protein and caloric requirements will not only be solved by growing more food and resorting to family planning measures but also by saving the produce from deterioration and wastage, and its efficient allocation to meet the growing requirement of population. In countries with varied climatic conditions, it is a steady struggle of man with insects, mites, rodents and microbes in getting the food stuff.

Need and Objectives of Storage

Since times immemorial, man adopted a particular system of storage and certain produce storage standards. Some of the storage methods are still in use in several regions, in the capacity varying from one kg to several hundred quintals, like hollowed gourds, skin bags, mud bins, excavated stones, woven baskets, underground pits etc., particularly in the tropics. The problems of storage in developing countries are more acute than that in well developed countries and a considerable disparity seems to be there in food availability. All need a food supply that should be nutritious, clean; free from insects, rodents, birds, other animal filth and harmful chemical residues. There are two types of needs, one immediately after harvest and the other in off season. There is no need of storing the produce for immediate requirement but for the latter case, the need to conserve produce properly is inevitable. Further, the need for storage has always arisen for one reason to distribute commodity in deficit production areas and the other based on improved quality standards. In all the way, therefore; growers, processors, transporters and warehouse owner must assist to comply with these requirements.

As the name indicates, micro-organisms are very minute, cellular, living organisms which cannot be seen with the naked eyes (however, large colonies of fungi can be seen). Micro-organisms affecting stored grain can be divided into the following groups in order of their significance:

1. Fungi
2. Actinomycetes
3. Yeast
4. Bacteria
5. Protozoa (not found in sound food grains)

Fungi, bacteria and actinomycetes are grouped under the Thallophyta of the plant kingdom. The most important factors for their normal development are: (i) Nature of Food, (ii) Moisture, (iii) Oxygen and (iv) Temperature.

Fungi include a large group of organisms and there are about 72,000 described species and the total number of species in the world may be as high as 1.5 million (Hawksworth et al., 1995). The infections that these fungi cause on a group of organisms viz. plants, animals, insects etc. may or may not be beneficial depending upon the type of host infected. With reference to insects, fungal infections in pest insects are beneficial which can be used effectively in biocontrol programmes. On the other hand, fungal infections in beneficial insects are harmful.

The entomopathogenic or entomogenous fungi mainly include those genera of fungi that associate with insects and some arthropods in a variety of ways. The association with the insects may be saprophytic, commensalistic, parasitic or pathogenic with the insect host. Some entomopathogenic fungi like Coelomomyces are obligate pathogens which can’t be cultured outside a living host, but most of them are however, facultative pathogens capable of growing without host insect. More than 750 spp of fungi, mostly deuteromyctes and entomophthorales from about 100 genera are pathogenic on insects and many of them offer great potential for pest management. The entomopathogenic fungi which have been most intensively investigated include Beauveria, Metarrhizum, Paecilomyces, Entomophthora, Verticillium, Hirsutella, Eryina, Mefarrhizium etc. Out of them Beauveria and Mefarrhizium have been extensively used in large scale for the control of several crop pests.

Introduction

One of the most important concerns confronting both developed and developing nations in this age of rapid industrialization is how to deal with the ever-increasing volume of solid waste. One aspect of the environmental crisis that occurs alongside the development of the global economy is the rapid increase in waste volume (Zibres et al., 2011). The threat that organic waste poses to both the natural world and people’s health in today’s modern society makes it a primary topic of investigation in the modern community. The annual production of agricultural waste across the globe is greater than hundreds of megatons, and a significant portion of this waste is either improperly disposed of or burned directly, which contributes further to the acceleration of both global warming and air pollution (Zhang et al., 2016).

The compost that is produced through the biological process of composting can be used as an organic fertilizer in agriculture, vegetable gardens, and other types of gardens. Composting is a biological process that acts on the transformation of the organic matter that is present in the residues into material that is humidified (Antunes et al., 2021). In addition to having low production costs, this method is also environmentally friendly, making it a viable option for the long-term processing of this waste (Lopez-Gonzalez et al., 2015). Composting processes that are mediated by invertebrates from the soil fauna, such as vermicomposting and milli-composting, are proposed along with a variety of mixtures, practices, and management to improve the efficiency of composting as well as the quality of the compost produced. Traditional composting relies heavily on the activity of microorganisms. Vermicomposting and milli-composting are two examples of composting processes that use invertebrates from the soil fauna. Milli-composting is a relatively unknown biotechnology that uses diplopods, more commonly known as millipedes, to increase the biotransformation of vegetable wastes into stable organic matter. It not only aids in climate change mitigation but also aids in carbon sequestration, so milli-composting can be used as an alternative to modern composting as it is crucial for preventing pollution and promoting lush plant life.

Environmental protection Agency (EPA)has established category of pesticides called “Reduced Risk” pesticides to encourage the development, registration and use of products which could result in reduced risks to human health and the environment. New Generation pesticides are considered for “Reduced Risk” status if they have at least one or more of the following status: low risk to human health, low toxicity to non target organisms, low potential to contaminate ground water, surface water or other valued environmental resources and have the potential to expand the adoption and effectiveness of IPM.

There are several species in this cosmopolitan family that are of importance chiefly as pests of stored foods, flour, grain, seeds and bulbs, feeding on these products or the fungi that develop on them. These mites are mostly very minute, almost colourless, with the body bearing a few long setae, and with the legs terminating in one claw and usually a sucker. When very abundant the mites and their cast skins form a buff-colored dust and give rise to a characteristic odour. The living mites move slowly away from a source of light. An interesting characteristic of these mites is a nymphal resting stage (hypopus) during which they take no food but attach themselves to other mites, insects and humans by means of suckers and are thereby transported to other suitable places for development, where they drop off, moult, feed, and develop into adult stage. The hypopus may be resistant to fumigants. However, the cheese mites, Tyrophagus casei do not have a hypopial stage. Prolonged storage of products subject to infestation without cleaning of pantries and shelves where such materials are placed. These mites can subsist on organic debris in cracks, crevices and corners and are readily spread to other areas.

Introduction

Mites and ticks belong to acarology an offshoot of animal science Zoology a common man mites and insects look alike but former can be easily differentiated by absence wings and antennae and presence of four pairs of legs in most farms. Parasitic mites and ticks live on domestic animals, pets and poultry (Baker and Pritchard, 1960; Baker and Tuttle, 1994; Krantz and Walter, 2009). They are responsible for inducing paralysis, host intoxication, irritation carriers of pathogens and other health disorders to them. The severe bites of ticks cause tick toxicosis producing deep wounds, which bleed and are open to secondary infection. Parasitic mites are among the serious pests of the bees the world over. At times they cause mass mortality of brood and put a heavy loss to apiculture industry. Both solitary and social bees that are important pollinators are parasitized by Messostigmatid mites reducing their life span and foraging efficiency. They parasitize silkworm larvae, pupae and adults. By their toxication silkworms die in few hours. Man himself is not free from the attack of mites. Human itch mite, scabies mite and pyroglyphid mites causing allergic asthma are notorious examples of parasitic mites on man. Dancing on the head of a pin’ is definitely impossible for most animals. However, a large number of mites, the smallest Arachnida could do it. The size of these creatures ranges from a fraction of a millimetre, invisible to the naked eye, to about one centimetre in ticks.

Introduction

The changing climate and its variability are a big concern for the human being. The recurrent droughts and floods, which are the results of this changing climate seriously hamper the livelihood of billions of people who depend on land for most of their needs. According to the United Nations Framework Convention on Climate Change (UNFCCC) (UNFCC; 1992), “climate change is the change that can be attributed directly or indirectly to human activity that alters the composition of the global atmosphere and which is in addition to natural climate variability observed over comparable time periods” The Intergovernmental Panel on Climate Change (IPCC report, 2022) issued a cautionary statement regarding the imminent attainment of the 1.5oC threshold by the global climate system within the forthcoming 20-year period. It further emphasized that only implementing exceedingly stringent reductions in carbon emissions, commencing at present, would serve as a viable measure to avert an impending ecological catastrophe.

Droughts: A time in which circumstances are significantly drier than average is referred to as a drought.

Floods: A flood is an abnormally large outpouring of water (or, on very rare occasions, other fluids) that covers normally dry ground.

Livelihoods: The term “livelihood” refers to a collection of activities that are carried out during one’s lifetime and are considered necessary to one’s day-to day existence. Obtaining necessities such as water, food, fodder, medication, shelter, and clothing are examples of such activities.

Introduction

The soil is an invaluable resource that sustains life in innumerable ways. It provides a dynamic foundation for agriculture, supporting growing crops, and serving as a habitat for organisms. It plays a crucial role in maintaining biodiversity. Additionally, soil acts as a filter, purifying and storing water, and it reserves essential plant nutrients. however, soil resources face various threats that endanger their health and productivity. Soil erosion, the removal of the top layer of soil through natural or human-induced processes, poses a significant challenge. It not only leads to a loss of fertile soil but also causes widespread environmental degradation, and reduced agricultural productivity in response to this difficulty, soil conservation emerges as a principal priority. Soil conservation incorporates a range of practices and strategies to prevent soil erosion, and promote sustainable land use. By adopting and implementing effective soil conservation measures, we can safeguard this irreplaceable resource for future peers and ensure food security and environmental sustainability.

The main highlight of the study is to shed light on the causes and consequences of soil erosion, exploring different conservation practices and techniques; also to understand the vital processes and factors contributing to soil erosion, including wind and water erosion. Additionally, to study its impact on soil and crop production and strategies for different conservation practices to mitigate erosion, preserve soil fertility, and ensure the long-term sustainability of our agricultural systems and ecosystems.

Abiotic Stress Tolerance: The ability of plants to withstand and adapt to nonliving environmental stressors, such as drought, salinity, or extreme temperatures. Afforestation and Reforestation: Afforestation involves planting new forests in previously non-forested areas, while reforestation involves restoring degraded or deforested lands with trees to sequester carbon. Agrarian Society: A society characterized by agriculture as the primary means of subsistence and economic activity. Agrarian: Pertaining to the cultivation of land, agriculture, or rural life. Agribusiness: The commercial activities, including production, processing, and distribution, related to agriculture and farming. Agricultural Chemistry: A branch of chemistry that focuses on chemical processes and substances related to agriculture, including soil chemistry, fertilizer composition, and pesticide development. Agricultural Diversification: The strategy of expanding the range of crops, livestock, or other agricultural activities in a rural area to increase income and food security. Agricultural Economics: A branch of economics that focuses on the production, distribution, and consumption of agricultural goods and services, as well as the economic factors and policies that influence agricultural markets. Agricultural Extension: The application of scientific research and new technologies to agricultural practices through education and advisory services. Agricultural Innovation: The process of developing and adopting new ideas, practices, and technologies in agriculture. Agricultural Machinery: Various mechanical devices and equipment designed for use in farming, such as tractors, plows, and harvesters. Agricultural Subsidies: Financial incentives provided by governments to farmers or agricultural producers to support their production, stabilize prices, or achieve other economic or social objectives. Agriculture: The science and practice of cultivating crops, raising livestock, and managing resources for food production and other agricultural products. Agroecology: The scientific discipline that applies ecological principles to the design and management of sustainable agricultural systems, focusing on biodiversity, nutrient cycling, and reduced environmental impact.

The foundation of modern insect classification was laid by Brauer in 1885. According to Brauer insects were classified as Subclass: Apterygogenea (pterous) and Pterygogenea (winged) based on:

• Presence or absence of wings.

• Mouthparts.

• Metamorphosis.

• Number of Malpighian tubules.

• The nature of wings.

• Thoracic segments etc.

The earliest classification of insects was based on habits and habitats and on certain gross anatomical features that define the general aspects of different kinds. In classifying insects, not only anatomical characters but also facts pertaining to physiology, biology, distribution, ecology and sometime cytology of the species is taken into consideration.

Introduction

Indian agriculture accounts for nearly 65% of the country’s employment, 23% of the total GDP and nearly 20% of total export earning and supplier of raw material to major industries. Agriculture is not only the backbone of Indian economy and food security but also a way of life, a tradition and anchor of overall livelihood opportunity for about 700 million of our one billion populations. Agriculture, therefore, is and will continue to be central to all strategies for planned socio-economic development of the country.

Losses due to insect pests represent one of the single largest constraints to crop productivity estimated at 14% of the total agricultural production. Besides, insects also serve as vectors of plant pathogens. The annual global cost of pest management through insecticides is more than US$10 billion per annum. However, over-reliance of insecticides creates agricultural, environmental and pest management problems, such as frequent evolution of insect resistance, destabilization of multitrophic interactions and environmental contamination. Broad spectrum insecticides often compound these problems. Insecticides often interfere with biological control, causing secondary pest outbreaks or catastrophic resurgence of insecticide resistant herbivores. The vicious cycle of pesticide treadmill effect is observed when more pesticides lead to insects developing resistance, which in turn necessitates use of more and newer pesticides. Therefore, now it is imperative to develop a holistic system of tackling pests to make it more eco-friendly, economically viable and socially acceptable for the farmers.

The insect body is made up of multicellular tissues. The body is bilaterally symmetrical and is covered by a hard, chitinous exoskeleton. The chitin at the junction of the segments is thinner and pliable and hence insects can bend their bodies. The exoskeleton is made up of several layers of non-living cells produced from the epidermis. Because of the hard chitin us exoskeleton of the body, the growth of the insect is affected beyond a certain extent. So, to facilitate further growth,, this exoskeleton is cast off a few times and this is known as ‘molting’. The number of moultings in a particular species is more or less constant.

The way a chemical moves, persists, and behaves in its surroundings is known as its behaviour. A chemical’s behaviour will dictate both its residual properties and field efficacy. The behaviour of insecticides is determined by their chemical and physical characteristics as well as the interaction of environmental elements. Our capacity to comprehend and forecast how insecticides will behave in the environment will determine our ability to keep utilizing insecticides.

Important features of systemic insecticides

1. They are not susceptible to wash off by rain

2. By virtue of their movement inside plants, they can afford to protection to regions where they have not been sprayed

3. They are often been transported towards region of growth

4. Since they have very weak contact action, safe to beneficial organism.

In sub-tropical agro-climatic conditions of India, a variety of insect-pest, weeds and diseases hamper the economic growth of field crops. For effective control of these pests, a number of pesticides including insecticides, fungicides, herbicides and nematicides are to be applied. Estimation technique for single pesticideonly can not be followed for detection of residues of all categories of pesticides. Hence, this constantly expanding use of pesticides on food crops accentuates the need for rapid, precise and sensitive method for determination of pesticide residues of all the major groups of pesticides. In such situation, multi-residue analytical technique can be efficiently followed for detection and estimation of multiresidues of intra and inter class xenobiotics.

The purpose of multiresidue analysesistodeterminetheresidues ofas manypesticides as possible withina short period of time even if the recoveries of somecompounds are low. In multiresidue methods the recoveries up to 70% are accepted.The recoveriesless than70%have tobe mentionedspecifically. Multiresidue analysis is relativelymore sensitiveand requires extreme vigilance on the part of the analyst during processingof samples. Additionally, instrument, GLC,need to beequipped withcapillary columnsforhigh resolutionand sophisticated detectorslikeECD, NPDand MSD for detectingmulti-residues of the pesticides. Multiresidue analytical methods/techniques havebeen developed for determination of general pesticide residues for some environmental componentsand differentfood commodities.Criteria formulti-pesticides screening as per California Department of Food and Agriculture (CDFA) are: