eChapters

Earth’s atmosphere is a dynamic and complex system that plays a crucial role in supporting life as we know it. This chapter explores into the fascinating world of this gaseous envelope that surrounds our planet, exploring its composition, structure, and the processes that drive both our daily weather and long-term climate. It includes:
• Composition and Structure: It will begin by examining the unique blend of gases that make up the atmosphere, including nitrogen, oxygen, argon, and trace amounts of others. It will also be explored how the atmosphere is structured into distinct layers (troposphere, stratosphere, mesosphere, thermosphere, and exosphere), each with its own characteristics and role.
• Weather: Weather refers to the short-term conditions of the atmosphere at a specific time and place. We’ll discuss the key elements of weather, such as temperature, pressure, humidity, wind, and precipitation, and how they interact to create the ever-changing weather patterns we experience.
• Climate: In contrast to weather, climate describes the long-term average of atmospheric conditions in a particular region. We’ll investigate the factors that influence climate, including latitude, altitude, proximity to oceans, and atmospheric circulation patterns. We’ll also explore the different climate zones found across the globe.
• Interconnectedness: A key focus of this chapter understands how weather and climate are interconnected. Daily weather patterns are influenced by the same fundamental atmospheric processes that shape long-term climate. For example, the way the sun’s energy interacts with the atmosphere drives both daily temperature variations and global climate patterns.

An earthen dam is an embankment constructed primarily from compacted soil to impound runoff and create a reservoir. Such dams support irrigation, water supply, groundwater recharge, hydropower generation, and flood moderation. Their successful performance depends on suitable site conditions, proper materials, adequate compaction, controlled seepage, stable slopes, and safe disposal of surplus water. This chapter introduces the advantages and limitations of earthen dams, construction materials, types of embankment sections, and their principal components. Particular attention is given to cut-offs, impervious cores, casing or shells, foundations, filters, drainage systems, spillways, outlets, slope protection, and common causes of deterioration or structural failure.

Introduction

Earthquakes are the most destructive among all the natural hazards. Most of the time, they occur without any warning, which makes them most feared and unpredictable natural phenomena. Globally, on an average two earthquakes of magnitude 8 are known to occur every year. Some of the countries like Japan, China and United States have suffered several damaging earthquakes in the past. India has also experienced a number of high intensity earthquakes in the recent past and more than 650 earthquakes of magnitude >5.0 have been reported in India since 1890. Sixty-nine earthquakes in Delaware (U.S.A.) have been documented or suspected since 1871. Refer to Baxter (2000) for more details about the DGS Seismic Network and for documentation of earthquakes. In the 1930s Charles Richter developed a magnitude scale (Richter scale) which was an objective way of discriminating between large and small shocks using the seismic wave amplitude recorded by seismographs (Richter, 1958).

Even though the great Indian author Surpala mentioned in his epic ‘Vriksha ayurveda’ (Science of Tree growing) about the value of incorporation of earthworms in soil for better propagation of pomegranate plants in 10th century AD, but Sir Charles Darwin’s recognition to earthworms as ‘Farmer’s friends’ in 1837 in fact, inspired researchers throughout the world to study the role of earthworms in soil ecosystem.

Earthworms are defined as soft, bilaterally symmetrical, tubular segmented worms which contain clitella gland, prostomium lobe in front of mouth and anus at the posterior end. The entire body is divided externally into a series of distinct segments. Scientifically these terrestrial worms are classified under phylum ‘Annelida’ due to presence of annuli or ring segments and class ‘Oligochaeta’ due to presence of few setae or hair like structure on all segments except the first and last ones.

1. Introduction
Dyes are compounds after addition to a substrate, for a moment give it a colorthrough a process that modifies the colored substance’s crystal structure (Bafanaet al., 2011). Such varieties of compounds with significant coloring capacityare widely employed in the textile, pharmaceutical, food, photographic, andpaper industries (Zollinger et al., 1987). Dyes can adhere to suitable surfacesthrough methods such as dissolving, forming covalent bonds, complexing withsalts or metals, physically adsorbing, or being mechanically retained (Kirkand Othmer, 2004). The chemical structure and application of dyes determine
their classification. The dye color is produced by a collection of atoms calledchromophores. Chromophore centres, which are responsible for color, consistof various functional groups like azo, anthraquinone,methine, nitro, arylmethane, carbonyl, and others. Additionally, substituents that either donateor withdraw electrons to enhance or create the color of these chromophoresare called auxochromes. Common examples of auxochromes include amine,carboxyl, sulfonate, and hydroxyl groups. There are three methods for dyingtextile materials: batch, continuous, and semi-continuous. Thekind of materialincluding yarn, fabric, fiber, clothing, and fabric structure as well as the generalfiber size of the dye lot, type, and quality standards of the dyed fabric, all playa role in determining the dyeing method used. Among these techniques, theprocess called the batch procedure is the most frequently employed for dyeingtextile materials. (Ogugbue et al., 2011).

Since many decades environmentalists have warned of perils of chemicalised sports grounds, golf courses and cricket fields. They warn that our health is inextricably linked to the widespread use of toxic chemicals and also complain about the non-availability of safe alternatives.
Eco-sustainable sports fields must use the methods : 
    ·    That do not pollute
    ·    That are environment-friendly and effective
    ·    That economize on the use of water and energy

Introduction

The deterioration of interior air quality brought on by dangerous chemicals and other factors is known as indoor air pollution, which can be up to 10 times worse than outside air pollution. This is due to the fact that confined spaces foster the buildup of potential pollutants more than do open spaces. In underdeveloped countries, statistics show that indoor air pollution has a far worse effect on health than outside air pollution. Indoor air pollution can be defined as ‘ the totality of attributes of indoor air that affects a person’s health and well-being’ ( Singh & Jamal, 2012). Indoor air pollution from solid fuels was to blame for 3.5 million fatalities, 16% of particulate matter pollution, and 4.5% of global daily-adjusted life years in 2010. (DALY).

Introduction

Reservoirs constitute the prime inland fishery resource in the country by virtue of their numerous production potential. These man-made ecosystems offer enough scope for stock manipulation through ecological maneuvering, paving the way for production hikes at a relatively low-capital investment. Unlike the aquaculture systems, where the development is capital intensive, a reservoir fishery development is labour productive and ensures employment for some of the weakest sections of our society.

Abstract

Three seepage tests were carried out for an earth canal at Rawakeeb Research Station (RRS)-west of Omdurman and an average seepage rate of 3.4 m/day was obtained. This value suggests that irrigation canal at RRS should be lined. In addition to that preliminary economic evaluation showed that canal lining is imperative in RRS. A concrete slab form was well designed for lining of RRS canal. Precasting technique and construction technique provided the required water tightness. Economic evaluation was done for RRS canal to investigate the extent of occurrence of supposed advantages, and to estimate costs and benefits and rate of return to lining. The capital expenditure (C), net present worth (NPW) and benefit/cost ratio were found to be 2600.4, 1961.9 and 1.3 respectively which offers a good indicator to adopt the technique.

The harmful impact of chemical pesticides and fertilizers like gradual low productivity of land, growing nutrient imbalance in cultivated soils, accumulation of high pesticide residue in food materials, increasing resistance of harmful pests towards chemical pesticides and continuous increase in environmental pollution are forcing farmers to adopt organic or sustainable farming by considering vermicompost as possible substitute to the costly chemical fertilizers during crop cultivation. Gradual awareness among common people on organic farming, large availability of organic wastes in both rural as well as urban areas, more avenues of vermicomposting training, global market for organically produced foods and ever increasing unemployment problem have opened up greater prospects of commercial vermicomposting (Sannigrahi, 2012).

About two-thirds of the developing world’s three billion rural people live in about 475 million small farm households, working on land plots smaller than two hectares. Many are poor and food insecure and have limited access to markets and services. Their choices are constrained, but they cultivate their land and produce food for a substantial proportion of the world’s population. Besides farming, they have multiple economic activities, often in the informal economy, to contribute towards their small incomes. These small farms depend predominantly on family labour. In China, nearly 98 percent of farmers cultivate farms smaller than 2 hectares – the country alone accounts for almost half the world’s small farms. In India about 80 to 85 percent of farmers are small. In Ethiopia and Egypt, farms smaller than 2 hectares constitute nearly 90 percent of the total number of farms. In Mexico, 50 percent of the farmers are small; in Brazil smallholders make up for 20 percent of the total number of farmers (Rapsomanikis, 2019).

Environment: Environment means “surrounding”. First definition of environment was given by “Ernst Haeckel”. According to this - The relation between all organic and inorganic atmosphere of any animal is called environment.

Introduction
An ecosystem is any unit that consists of all the creatures, or communities, in a certain area that interact with the physical environment to produce a trophic structure, biodiversity, and material cycle within the system. Various biosphere ecosystem types are
1) Natural ecosystems
2) Man-made ecosystems
Natural Ecosystems
Under natural conditions, these ecosystems function independently with little to no significant human intervention. These are further separated as follows based on the specific type of habitat:
• Terrestrial: grasslands, deserts, and forests
• Aquatic (open to the water), which is further subdivided into

2.1 Ecosystem

An ecosystem can be defined as a dynamic entity composed of a biological community and its associated abiotic environment. Often the dynamic interactions that occur within an ecosystem are numerous and complex. Ecosystems are also always undergoing changes or alterations to their biotic and abiotic components. Some of these alterations begin first with a change in the state of one component of the ecosystem which then cascades and sometimes amplifies into other components because of relationships.

The human activities of various kinds have resulted in caused a number of dramatic changes to a variety of ecosystems found on the Earth. Humans use and modify natural ecosystems through agriculture, forestry, recreation, urbanization, and industry. The most obvious impact of humans on ecosystems is the loss of biodiversity. The number of extinctions caused by human domination of ecosystems has been steadily increasing since the start of the Industrial revolution. The frequency of species extinctions is correlated to the size of human population on the Earth which is directly related to resource consumption, land-use change, and environmental degradation. Other human impacts to ecosystems include species invasions to new habitats, changes to the abundance and dominance of species in communities, modification of biogeochemical, and modification of hydrologic cycling, pollution, and climatic change.

Introduction
• Biosphere: Living things and the non-living systems that support them in their surroundings are intricately linked and mutually influence one another. Living things inhabit a comparatively small sphere that spans the surface of the globe, measuring less than 20 km in thickness and spanning roughly 8 km above and 10 km below sea level. The biosphere is the thin layer of soil, water, and land that covers the surface of the world. The land (lithosphere), the water (hydrosphere), and the air (atmosphere) are its three non-living constituents.
• Lithosphere: The solid portion of the earth is made up of the rocks and soil found both underneath and on the surface. About 4.6 billion years ago, a hot ball of substance gave rise to the earth and the lithosphere. Just eight of the 92 elements that make up the lithosphere are frequently found in crystal rocks. Of these components, 47% are oxygen, 28% are silicon, 8% are aluminum, and 5% are iron. The other ingredients are calcium, magnesium, sodium, and potassium, each making up 4%. When rocks break down, they create soil, which is what humans need for agriculture.
• Hydrosphere: The hydrosphere is the area of the earth that is covered in water. It encompasses 0.7 of the planet’s area. Only a minorportion  of the hydrosphere is made up of fresh water; the majority of the hydrosphere is made up of the marine ecosystem

Wild edible plants have played an important role in human life since time immemorial. People depend on the wild plant resources for various purposes like fire wood, timber, non-timber forest products, medicines and food (Pushpangadan, 1995). In many cases, rural communities depend on wild edible plants, to meet their food needs in periods of food shortage. Indian subcontinent is blessed with varied and diverse soil and climate conditions suitable for the growth of various plant species. It has been estimated that 9000 of the 15,000 higher plants occurring in India are commercially useful. Of these 7500 are medicinal, 3900 are edible, 700 are culturally important, 525 are used for fiber, 400 are fodder, 300 for pesticides and insecticides, 300 for gum, resin and dye and 100 for incense and perfume (Anonymous, 1992-1993).

Effect of Air Pollutants on Plants
 
Elements of those air pollutants which accumulate in plants (S from SO2, heavy metals from anthropogenic emissions etc.) may be used for specific bio-indication of possible effects caused by these pollutants, and for mapping their spatial and temporal distribution. Measuring accumulated components in plants rather than directly in the environment, provides the dual advantages of an integrated rather than a momentary value, and of a biological content rather than a mere concentration (Stocker and Gluch, 1990).

The weather plays a very significant role in crop production. The agricultural production depends upon four factors i.e., soil, genetic material, management practices and weather. Of these four factors, the farmers have least control on weather and have to evolve management strategies to cope up with the weather conditions. The crops can be grown only when the seasonal weather conditions are conducive to crop production. The different weather factors on crop growth and development are as follows:
13.1. Temperature
For each species of plants, there are upper and lower limits of temperature beyond which the growth is negligible. The optimum temperatures at which growth is maximum may vary from crop to crop but will be within the range of 15 to 30°C. Temperatures beyond 45°C cause wilting of plants. There are also optimum temperature requirements during different stages of crop growth.
13.1.1. Warm Season Crops: The Warm season crops are rice, sorghum, maize,
pearl millet, groundnut, pigeon pea, cowpea etc. These crops are also called tropical crops. These crops can be grown during monsoon season and in early summer season. The optimum temperatures for these crops fall in the range of 15°C to 38°C.
13.1.2. Cool Season Crops: The crops which grow best under cool weather
conditions are called cool season crops and are generally grown during winter season. The important cool season crops are wheat, mustard, Chickpea, barley, potato, Safflower. These crops are also called temperate crops. The optimum temperature for better growth of these plants range from 10°C to 30°C.
13.2. Effect of Temperature on Growth and Development
The crop development is described in terms of its various stages of growth including germination of seeds, emergence of seedlings, tillering, flower initiation, grain formation, physiological maturity and harvest maturity etc., before it completes its life cycle. The various stages of growth, the crop passes through are called phenophases. Phenology is the study of timing of the phenophases. The temperature and day length (photo period) will have considerable influence on phenology of the crops. The temperature from which crop development begins is called base temperature. The base temperature is considered as 8°C for the crops grown during kharif season and 5°C for the crops grown during winter

The world’s fisheries, encompassing both marine and freshwater environments, play a critical role in global food security, livelihoods, and economies. However, these vital resources are increasingly threatened by the far-reaching consequences of climate change. This chapter delves into the multifaceted impacts of climate change on the fisheries sector, exploring the complex interplay between rising temperatures, altered weather patterns, and ocean acidification, and how these changes affect fish populations, habitats, and the communities that depend on them.
We will examine the ways in which climate change is altering the fundamental
dynamics of aquatic ecosystems, leading to shifts in species distribution, disruptions in food webs, and increased vulnerability to extreme weather events. Special attention will be given to the differential impacts on various regions and fisheries, considering the unique challenges faced by small-scale fisheries and developing nations. Furthermore, the chapter will discuss the potential consequences for global fish production, economic stability, and food security, highlighting the urgent need for sustainable management practices and adaptive strategies to mitigate these adverse effects and ensure the longterm viability of the fisheries sector.
13.1 Climate Change Impacts on Marine Fisheries
Climate change is significantly altering marine ecosystems, leading to profound impacts on fisheries. These changes affect various aspects of fish biology and ecology, including fishery dynamics, migration patterns, and breeding seasons (Fig.13.1). Here’s a detailed breakdown: