eChapters

Introduction

Nanotechnology is a scientific and technological field that manipulates matter at the nanoscale to create, design, characterize, and use structures, systems, and devices with novel properties (Sattler 2016). Nanoparticles are one of the most important products of nanotechnology, as they exhibit different features from their bulk counterparts due to their size and shape (Sabir et al., 2014). Nanoparticles have applications in various disciplines, such as materials science, medicine, agriculture, physics, and chemistry.

Introduction

Nanopesticides are pesticides that use nanomaterials or nanotechnology to improve their effectiveness and safety in agriculture. Nanomaterials are materials that have at least one dimension between 1 and 200 nm. Nanomaterials have different properties than their bulk counterparts, such as higher surface area, reactivity, and mobility. Nanopesticides can be formulated in various ways, such as nanosized active ingredients, molecular active ingredient nanocarrier complexes, or active ingredients encapsulated or coated by nanomaterials (Deka et al., 2021; Xu et al., 2022).

INTRODUCTION

The discipline of Agrometeorology, an applied science is less than fifty years old. Its services are operationally used by individual farmers in developed countries, and by agricultural or development services in more than half of the countries of the world. Its contribution to agricultural production by examining forecast is sought in virtually all countries. In many countries, the respective governments have expressed the desire to use meteorological information to a much larger extent in day-to-day farm planning and operations. The climate database is used for the development of practical criteria in planning and management of irrigated and rainfed crop production system (Martin Smith, 2000).

Though a huge set of Agromet data exists in India, its utility has not been effective due to the scattered location of these data sources and the impediments for free flow of data to the users to analyze and interpret for real-time decision making in agriculture. There is also a considerable time lag between the actual observation and data availability. In view of the importance and the immediate exigency to centralize the database system for helping the researchers and planners, a central agrometeorological databank facility funded by DST from 1998 to 2003 and later by ICAR with the following objectives was established at Central Research Institute for Dryland Agriculture (ICAR), Hyderabad.

Definition of Disaster

A disaster can be defined as a sudden or catastrophic event that causes significant damage, destruction, and disruption to human life, property, or the environment. Disasters can be natural, such as earthquakes, hurricanes, floods, wildfires, or they can be human-made, including industrial accidents, terrorist attacks, or technological failures.

Disasters often result in the loss of lives, injuries, displacement of people, infrastructure damage, and the interruption of essential services like electricity, water, and communication systems. They can have long-lasting impacts on communities, economies, and the environment.

Governments, organizations, and communities implement disaster preparedness, response, and recovery strategies to mitigate the effects of disasters, protect lives and property, and facilitate the rebuilding and restoration of affected areas.

It is a well known fact that natural disasters strikes countries, both developed and developing, causing enormous destruction and creating human sufferings and producing negative impacts on national economies. Due to diverse geo-climatic conditions prevalent in different parts of the globe, different types of natural disasters like floods, droughts, earthquakes, cyclones, landslides, volcanoes, etc. strikes according to the vulnerability of the area. India is considered as the world’s most disaster prone country. It has witnessed devastating natural disasters in recent past like droughts, floods, cyclones, earthquakes, landslides, etc. 

Introduction

The natural hazards like floods, cyclones, droughts, landslides and earthquakes are not rare or unusual phenomenon. India is among the world’s most disaster prone areas and a large part of the country is exposed to such natural hazards, which often turn into disasters causing significant disruption of socio-economic life of communities leading to loss of life and property. It would not be considered as a disaster unless it resulted in actual damage to human life or property. According to data accumulated over past 25 years, natural disasters in Asia accounts for about 40% of the world’s total disasters while the death toll ratio is about 50% and the number of people affected is about 90%. The latter figure is about 2.2 times the ratio of number of occurrences in Asia. The figures vary widely over the decades, a result that can be attributed to a few particularly terrible disasters. Such as the 1976 Tangshan Earthquake in China, which killed about 250,000, and a series of severe cyclones that hit Bangladesh in 1970 with a death toll of about 500,000. The death toll resulting from wind and flood disasters jumped by an order of magnitude in the 1990s. But this sudden increase affected Asia’s ratio to the world total by about 15 percentage points because there was a worldwide surge in this type of disaster. Clearly, there is an extreme concentration of victims of such disasters in Asia, Another substantial increase is clear in the value of damage caused by typhoons and cyclones; it is now running at 10 times the level of the 1980s. Again, however, the ratio has remained almost unchanged, at about 40%, because hurricanes in Central and North America account for more than 50% of the world total (51.2%, 58.5%, and 54.4% in the 1970s, 1980s, and 1990s,respectively). It is sadly worth noting that there has been conspicuous growth in the absolute value of damage in both Asia and the Americas.

Introduction
A natural disaster refers to a significant and harmful occurrence caused by the Earth’s natural processes. Examples of natural disasters include floods, storms, tornadoes, volcanic eruptions, earthquakes, tsunamis, and other geologic phenomena. A natural calamity can result in fatalities or destruction of property, and usually leads to economic harm, the extent of which is determined by the afflicted population’sability to bounce back and the availability of infrastructure.
Categories of Natural Disasters/ Catastrophes
Floods
A flood is the result of water overflowing and covering land. According to the EU Floods Directive, a flood is defined as the temporary  inundation of territory that istypically not submerged in water. Flooding can occur when the amount of water in ariver or lake exceeds its  capacity, causing the water to overflow and breach its normal borders. The size of a lake or other body of water may alter due to seasonal variations in precipitation and snow melt. However, it is not considered a substantial flood unlessthe water submerges land that is utilized by humans, such as villages, cities, populated areas, highways, and farms.

Conservation has always been one of the most important applications of ecology.Unfortunately, the term “conservation” suggest “hoarding”, as if the idea were simply to ration static supplies so that there would be some left for the future. In the eye of the general public the “conservationist” is too often presumed to be an antisocial person who is against any kind of “development”. What the real conservationist is  against  is unplanned  development  that breaks  ecological  as  well as human laws. The true aim of conservation, is two fold–
    
(1)     To ensure the  preservation of a  quality  environment that considers esthetic and recreational as well as product needs; and  
    
(2)     To ensure as continuous yield of useful plants, animals and materials by establishing a balanced cycle of harvest and renewal.

Forests are valuable renewable resources for humanity on Earth. The country’s forest cover has been estimated to comprise 19.39% of its entire geographical area. Forests consist primarily of trees that offer wood that can be transformed into solid, liquid, and gaseous fuels. Forests play a crucial role in regulating the Earth’s temperature by serving as carbon dioxide filters. They provide habitats and shelters for numerous species and also contribute to the visual beauty of the environment. Forests supply the necessary resources for a range of wood related industries, including pulp and paper, composite wood, rayon and other synthetic fibers, sporting goods, furniture, boat
construction, and matches. Timber plays a crucial role in the construction of buildings.Various products, such as bamboos, resins, gums, oils, fibers, medicines, katha, lac, shellac, etc., are derived from forests.
The country’s forest cover has been calculated to be 637,293 square kilometers, accounting for 19.39% of the country’s total geographic area. This falls short of the stipulated requirement, which is 30% of the entire land area. The geographic region is comprised of 11.48% dense forest, 7.76% open forest, and 0.15% mangrove. World Forest Day is observed on March 21st, while National Forest Day is celebrated on September 11th.

“Natural” means an ecosystem not influenced by man and resources means that reserve stock of supply which living things can take from nature for sustenance of life. In reference to man, natural resources can be defined as those natural reserve stocks of supply which man utilizes for his sustenance and welfare. The reservoirs of natural resources are the sun,  the  atmosphere,  the  lithosphere  and the  hydrosphere.  Natural resources include energy, air, water, soil, minerals, plants and animals. The nature of resource depends upon many factors such as scientific and technological development of the society, profession of that particular society, and culture.

Natural resources are the resources present naturally in the environment. These resources are used by human being for their survival. Minerals, building stones, forests, and various energy resources are known as natural resources. Natural resources have been extracted and utilized since ancient times but as the population increased, the demand of natural resources are increasing day by day.

The sun is a hot ball of glowing gases at the heart of the solar system. Its radiant energy is practically the only energy source to the earth. Very small and insignificant quantities of energy are available from other sources such as the interior of the earth, the moon, and other stars. Without the sun’s intense energy and heat, there would be no life on earth.

PROPERTIES OF SOLAR RADIATION

The mean distance of the sun from the earth, also known as one astronomical unit (1 AU), is approximately 1.496 × 10⁸ km, though the distance varies as the earth revolves round the sun in an elliptical orbit. At this average distance, light travels from the sun to earth in about 8 minutes and 19 seconds. The energy of the sunlight supports almost all life on earth by photosynthesis, and drives earth’s climate and weather. The minimum sun-earth distance is about 0.983 AU and the maximum is approximately 1.017 AU. The earth is at its closest point to the sun (perihelion) on around January 3 and at its farthest point (aphelion) on around July 4.

The sun makes up about 99.86% of the mass of the entire solar system. The visible disk or photosphere has a radius of 6.599 × 10⁵ km, and the solar mass is 1.989 × 10³⁰ kg. The sun is a completely gaseous body. The chemical composition (by mass) of the outer layers of sun is 71% hydrogen, 26.5% helium, and 2.5% heavier elements like oxygen, carbon, neon, and iron among others. Since the sun is not a solid body, different parts of the sun rotate at different rates. At the equator, the sun spins once about every 25 earth days, but at its poles the sun rotates once on its axis every 36 days.

Abstract

Satellite imagery interpretation has shown the existence of a major Palaeochannel system in the Great Indian desert. These palaeochannels belong to the mythological Sarasvati river, which seems to have flowed southwesterly close to the Aravalli hill ranges and joined the sea in the Great Rann of Kutch. Subsequently it seems to have shifted northwesterly, and more precisely in an anti-clockwise direction and got buried in the desert in Anupgarh plains. While its oldest course is the now misfit Luni river, its final trace is now represented by Ghaggar river. Whereas its overall northwesterly migration is attributed to NE-SW trending cymatogenic arching along the Great Rann of Kutch in the southwest to the Siwalik hills in the northeast, its multivariate palaeodrainage is attributed to block faulting and land subsidence in the Bikaner sector.

Introduction

Pulses belong to the taxonomic family Fabaceae, containing over 18,000 species divided into the three sub-families Mimosoideae, Caesalpinoideae and Papilionoideae. Pulses are commonly cultivated for several decades in all over the world because of the nutritional value of their seeds. Among different pulses, soybean, chickpea, common bean, cowpea, green gram, black gram and pigeon pea contribute significantly to serve the major protein source for the diets of large numbers of people living in Asia, Africa, and South America.

Production and Productivity of Pulses in india

In India, the production of pulses has not been able to keep pace with their domestic demand, resulting in import of 4-5 million tonnes of pulses per annum, especially from the countries like Canada, Myanmar and Australia to meet its domestic requirement (Kumar et al., 2018). India is the largest producer (around 25% of global production), however it consumes 27% and imports around 14% of its pulses requirements. The yield of pulses in India is quite low at 781 kg/ha which might be due to various factors. Pulse crops does not show any significant increase in area and production during 1950-51 to 2009-10, however, significant growth in area and production has been recorded during the last five years (i.e., 2010-2011 to 2016-17), with the adoption of high yielding varieties, increased usage of agricultural inputs like fertilizers and manures etc. The pulses under irrigation are cultivated in about 37% of the area while 63% of pulses are grown under rainfed conditions.

The productivity of pulses has increased about 77% at 779 kg/ha during 2016-17 from the level of 441 kg/ha during 1950-51. It is imperative to mention that the New Agriculture Technology (NAT) introduced during mid-sixties has increased the production of food-grains from 50.82 million tonnes during 1950-51 to 275.68 million tonnes during 2016-17 with the increase in area from 97.32 million hectares to 128 million hectares. In order to achieve self- sufficiency in pulses, the projected requirement by the year 2025 is estimated at 27.5 MT and to meet this requirement, the productivity needs to be enhanced to 1000 kg/ha.

It is important to reflect on the path we have traversed throughout this book. We embarked on a journey tracing the evolution of how weather and climate insights are applied to the intricate world of agriculture. From rudimentary observations to the sophisticated analyses of modern agrometeorology, we‘ve witnessed a growing understanding of the critical interplay between atmospheric conditions and crop production. We‘ve explored the groundbreaking integration of remote sensing technologies, offering an unprecedented bird‘s-eye view of agricultural landscapes, and the power of Geographic Information Systems to contextualize this data within specific spatial boundaries. The emergence of advanced data analytics, including the transformative capabilities of Artificial Intelligence and Machine Learning, has been a recurring theme, demonstrating how vast datasets can be harnessed to extract meaningful patterns and drive predictive insights.
• This progression has culminated in the central concept of precision agrometeorological advisory services – the focus of our in-depth exploration. We‘ve examined how moving beyond generalized recommendations towards tailored guidance, customized to the unique characteristics of individual farms and fields, represents a paradigm shift in agricultural support. This precision approach, underpinned by accurate, localized data and scientifically validated models, holds the key to addressing some of the most pressing challenges faced by today‘s farmers. From navigating the increasing unpredictability of weather patterns and the growing threats posed by climate variability to optimizing the use of increasingly scarce and expensive resources like water and nutrients, precision agrometeorology offers practical and impactful solutions. It empowers farmers to make timely and informed decisions, minimizing risks, maximizing efficiency, and ultimately enhancing the productivity and sustainability of their agricultural endeavors. This empowerment is not just about boosting yields; it‘s about fostering greater economic stability, promoting environmental stewardship, and ensuring food security for a growing global population.
This final chapter, „Next Generation Agrometeorology: Empowering Farmers with Precision,“ is designed to consolidate the wealth of knowledge and insights we‘ve gathered. We will synthesize the key findings and highlight the practical implications of embracing these next-generation approaches. Beyond a simple summary, we aim to provide a clear understanding of how the principles

Nitrogen is the most important element on which depends growth and productivity of plants. It is also the most abundant molecule in the atmosphere (80%), yet it cannot be utilized by plants. The plant utilizable form of nitrogen is either, its most oxidized form, the nitrates or the most reduced state, the ammonia.  The indiscriminate use of nitrogenous fertilizers amounts to depletion of non-renewable fossil fuels used in fertilizer production. Sustainable agriculture depends largely on renewable resources and on-farm nitrogen contributions are achieved largely through biological nitrogen fixation (BNF), which helps in maintaining and/or improving soil fertility by using atmospheric nitrogen. Annually BNF is estimated to be around 175 million tonnes of which close to 79% is accounted for by terrestrial fixation.

Abstract

Nitrogen is an important nutrient for growth and development of plants. Presence or absence of nitrogen often affects the amino acid composition of proteins, which may in turn change its nutritional quality. Increase in the elevated CO₂ concentration and temperature associated with future climates are expected to affect the nitrogen use efficiency (NUE), growth and grain yield of wheat (Triticum aestivum L.). Atmospheric CO₂ is steadily rising from the current level of approx 384 µLL^-1 and is expected to rises upto 550 µLL^-1 by 2050. It is predicted that the global temperature would increase by 1.5- 4.5^oC. The main future challenge is to feed nine billion people under an altered climate, as this increase in global temperature would affect, negatively or positively the future crop productivity including wheat depending upon the geographical location. The present book chapter summarizes the potential impact of elevated CO₂ and temperature on NUE of Triticum aestivum L.

A sound is a form or energy. Therefore, it has to have an impact on life in one way or the other. Most of the organisms of Kingdom Animalia communicate with each other creating a peculiar sound. Creating sound is inevitable for performing various life activities. Every animal species has the characteristic sound it reflects through its behavior. Whatever all the animals communicate through creating specific sounds is all-natural. Nature, as such is a stupendous repository of a diversity of sounds, all being specific characteristics of life.

Human behavior, however, is highly evolved in terms of creating a variety of sounds. Communication, entertainment, and many behavioral activities are expressed through creating distinctive sounds. There is a difference between natural sounds and the ones human beings create or can create. Humans often generate sounds, not just in a natural manner, but also with various technical aids, that often become unpleasant what we call noise. Creating noise, or noise pollution, seems to be an exclusive characteristic of the human species. Of course, there could be some natural sounds that might occasionally cause havoc to life. Examples are the sounds generated at the time of the volcanic eruption, during an earthquake