eChapters

Abstract

Geochemical processes occurring within the groundwater and reactions with aquifer minerals have a profound effect on water quality. Hydrogeochemical composition of groundwater can also be indicative of its origin and history of passage through underground materials which water has been in contact. Assessing groundwater quality and developing strategies to protect aquifers from contamination are necessary aspects for proper planning and designing water resources. Anthropogenic activities like explosion of population, industrial growth, inputs of fertilizer, pesticides, and irrigation has been a crucial factor for determining the quality of groundwater. In this scenario, 43 groundwater samples were collected from the Dindigul district of Tamilnadu, a Hard rock terrain. The samples wereanalyzed for major cations and anions along with heavy metals to derive the different quality parameters and to obtain the pollution indices of different samples. This study focuses to find out the spatial relationship between the analyzed fluoride concentration in groundwater and pollution indices derived from the heavy metal concentration in the groundwater of the study area and their variation with respect to season.

Abstract

A study on the Subsurface groundwater discharge (SGD) in the coastal Cuddalore region of south east India has been carried out. Measurement of surface water Radon, Water level, Electrical Conductivity (EC) and pH for a total of twenty four hours, by hourly interval the measurement has been calculated and promote correlated with tidal values calculated by WX Tide 32 software. The SGD measurements were made by using a modified seepage meter. The study reveals a match with water level variation and tide with minor variation due to influx of surface water. Saline discharges, fresh groundwater discharges and surface water mixing processes were identified along the coast. Lower SGD (37.24 – 79.16 cm/day) were observed during fresh groundwater discharge.

An ideotype is a crop plant having desirable morphological and physiological characteristics or both for cultivation in a specific agroclimate situation. An ideotype is constructed by the breeder on the basis of indepth study of morphological and physiological characters including their interrelationships, and intuition of the breeder based on his experience.

9.1 Plastering Storage area with Lime and Sand: The storage areas, known as Hagevu, are plastered with a mixture of lime and sand. These areas can store 20-30 bags of grain (Heggere and Chitradurga, Karnataka). Nagarathna (2000).

9.2 Indoor Bamboo or Reed Structure for Grain Storage: Indoor storage structures are typically made of bamboo. In regions where bamboo is scarce, farmers use locally available reeds. These structures are cost-effective since they utilize local materials and knowledge, but they do not protect grains from rodents and insects, have a short lifespan, are susceptible to fire, and require frequent maintenance (Andhra Pradesh and Orissa). Navanitha Raju (1999).

9.3 Storage of Onion Bulbs on Bamboo Platform: Onion bulbs can be stored for up to a year on a platform made of loosely woven bamboo strips, raised 2-3 feet above the ground to allow air circulation. The bulbs are piled 2-3 feet high and protected from sun and rain with a cover (Junagadh, Gujarat). Babulbhai (1993).

9.4 Method of Storage of Food Grains in Khanti: A 'Khanti' is constructed in areas with low underground water levels, where a 15-foot deep Khanti can be made. It has a sloping shape with a base 10-15 meters wide and a top one foot wide. A one-foot thick layer of husk mixed with neem is spread at the bottom and sides for pest protection. Different grains can be stored by separating them with layers of husk and large leaves. A Khanti can store 10-15 tonnes of grains from May to November (Maharashtra). Singh (1999).

9.5 Storage of Potato Tubers: Farmers in Hoskote village, Karnataka, store potato tubers in the field on an elevated, hardened soil area of 25 × 4 square feet, supported by 12 stone pillars. A thatched roof provides shade, and a bed of local grass and sugarcane leaves is spread on the floor. Harvested tubers are layered on this bed, with additional layers of leaves on top. The storage is checked for pests every 2-3 weeks. Calotropis gigantea leaves and branches are used around the heap to prevent rodent attacks. This method keeps potatoes cool even in hot conditions (Bangalore, Karnataka). Hannganahalli (1999).

10.1 Multiple transplanting for increasing papaya yield: Papaya seedlings are uprooted and transplanted at a different spot, then uprooted again and planted back at the same spot after fifteen days. This decreases the plant's height and enhances its productive phase (Banaskantha, Gujarat). Kodarbhai (1999).

10.2 Reducing mango flower drop by applying buttermilk and salt: To prevent mango flowers from dropping due to wind and disease, farmers dig a circular trench around the tree trunk during flowering, mix 60-80 liters of buttermilk with 2 kg of salt, and pour it into the trench. After absorption, fresh water is added, and the practice is repeated (Banaskantha, Gujarat). Dudhaji (1997).

10.3 Enhancing fruit set in papaya by inserting a nail in the stem: To induce fruiting in trees that flower but do not bear fruit, farmers insert nails (iron or wooden, 1-2 cm in diameter) into the stem about a foot high (Amreli, Gujarat). Sheldiya (1992).

10.4 Increasing yield of vegetables and fruits by using hair: Waste hair is collected and applied to vegetable, fruit, and ornamental crops. Hair is buried around plants in pits (1/2 kg for ornamental plants, 1 kg for fruit trees) one month after planting and 45 days before fruiting. For vegetables like tomato and brinjal, hair is dispersed during the last ploughing (Tamil Nadu). Subbiah (1998).

10.5 Lemon juice for higher lemon productivity: Farmers increase lemon productivity by spraying a solution of 100 ml lemon juice dissolved in 2 liters of water on lemon trees, ensuring all leaves are wet (Rajkot, Gujarat). Pethan (1997a).

IKS stands for Indigenous Knowledge Systems. When applied to pest and disease management in agriculture, IKS refers to the traditional and local knowledge systems developed by communities over generations to deal with agricultural challenges, including pests and diseases.

5.1 Key Aspects of IKS for Pest and Disease Management

1. Traditional Practices: Indigenous communities often have developed practices based on observation and experience to control pests and diseases. These may include specific plant combinations, crop rotations, or timing of planting to minimize pest damage.

2. Natural Remedies: IKS often includes knowledge of natural substances and plants that have pesticidal or medicinal properties. Examples include the use of neem, garlic, chilli, or certain plant extracts to deter pests or control diseases.

3. Cultural Practices: Traditional farming practices may include rituals or timing of activities that are believed to influence pest and disease outbreaks. For instance, planting during specific lunar phases or following certain cultural calendars.

4. Biological Control: Indigenous knowledge may also involve the use of natural enemies of pests, such as predators or parasites, to manage pest populations. This aligns with modern biological control principles.

5. Crop Diversity: Traditional farming systems often promote crop diversity, which can help naturally manage pest and disease pressures by reducing monoculture effects and providing habitats for beneficial organisms.

Seed treatment refers to the application of chemical or biological substances to seeds before planting. This process is designed to protect seeds from diseases, pests, and other adverse conditions that may affect germination and early growth and can improve overall crop yield and quality. Seed treatment can involve the use of fungicides, insecticides, bactericides, and other agents that help improve seed health and vigor. Seed treatment is a crucial step in ensuring healthy crop production. By investing in seed treatment, farmers can achieve better crop establishment and reduce the need for subsequent interventions, leading to more sustainable and cost-effective agricultural practices.

4.1 Importance of Seed Treatment

1. Disease Control: Seed treatment helps to protect seeds and seedlings from soil-borne and seed-borne pathogens, reducing the risk of diseases that can impair seed germination and seedling growth.

2. Pest Protection: Treated seeds are less likely to be damaged by insects and other pests that may be present in the soil. This protection can lead to higher seed survival rates and better crop establishment.

3. Improved Germination: By reducing the incidence of diseases and pests, seed treatment can enhance the germination rate and uniformity of seedlings, leading to more robust and consistent crop stands.

4. Nutrient Provision: Some seed treatments include nutrients or growth promoters that help improve seedling vigor and early development, ensuring that young plants have a better start.

5. Resistance to Environmental Stress: Seed treatments can help seeds withstand adverse environmental conditions such as drought, salinity, and temperature fluctuations, improving the overall resilience of the crop.

The sensors present over remote sensing satellites are designed to collect energy or radiance from the varied surface features having wide range of radiance i.e. from features like water bodies having very low radiance to features like sand or snow having very high radiance. But, most of the time, the study area may not have all these features; therefore, radiance values may remain confined to a narrow range. This reduces the contrast of the image, thereby decreases its visual quality. In this context, image contrast enhancement techniques are used for effective visualization and display of remote sensing image on computer screens or hard copy so that maximum amount of information can be derived through its visual interpretation.

Contrast enhancement of a digital image is a technique to modify the original grey levels of input image to the entire available range of the grey levels. This increases the contrast between various features in the image which improves the visual quality of original image. Contrast enhancement can be done by both linear and non-linear methods. Some of the commonly used contrast enhancement techniques with their implementation in R software are discussed in this chapter.

We need following packages for performing this exercise in R. raster package is required for importing of raster image and for performing contrast enhancement. RStoolbox package is also required for contrast enhancement as well as for visualization of raster data with ggplot2 package. rasterVis package is mainly used in this exercise for plotting histogram of the raster data.

The information of image is perfectly accepted by eyes when the image will be in convenient form. Always pictures accurately detail about information related to their position, sizes and inter-related with each other is objects. Actually images portray positional information which can be recognized as objects. Human eyes are exact example for differentiating that information from images to innate visual and mental ability.

Abstract

Before 1960’s, UAE was a poor developing country and almost there were no real signs of civilization. During the 1970’s two important things happened: H. H. Sheikh Zayed Bin Sultan Al Nahyan, the president of UAE, and the other Emirates rulers united together and established the United Arab Emirates and considerable oil findings were discovered. The UAE Leadership has proved to have deep future vision; in three decades the country jumped from a relatively backward scattered emirates to a well developed and civilized country.

Development is very obvious : from tents and sandy tracks to tower buildings and highways, from desert to green belts of palm trees and vegetables in all parts of the country, and most important, education, healthcare and all other services became the best in the region. Urban development was so sharp; someone who left the place 10 years ago can hardly know his location and services in all sectors became the best at the international level. The oil money was properly invested in development.

UAE Air Force Space Reconnaissance, used satellite and aerial images for the past 20 years and successfully utilized images from various sources including aerial photographs, Russian satellites images, SPOT and Landsat

19.1 Introduction

Nano technology or Nano Science is a new branch of research though nano materials or Nano Structures are not new. In nature nano particles or nano materials are abundant .The idea of manipulation, production, controlling size and physico - chemical properties and application as well as making devices out of these nano materials is the subject of Nano Science & Nano Technology. As the name suggests, the domain of Nano starts from 10-9 m but especially the effect of nano structures exists mostly in the 1-100 nm regime where quantum - mechanical behiviour is prevalent. Molecules with more than 10 atoms fall into the nanometer range  and scientists were not able to visualize individual molecules and nano scale objects until the invention of some very powerful microscopes. Working in Nano domain requires two basic facilities -

The pathogenicity of an organism varies form mild attack to severe fatal attacks. The host has many mechanisms to resist or to avoid the pathogens apart from immune systems. One or few of these will be activated when the pathogen enters into the body. Following are some of the listed natural host defense mechanisms.

1. Introduction
Global food security threatened by climate change is one of the most important challenges in the 21st century to supply sufficient food for the increasing population on diminishing agricultural land while sustaining the already stressed environment. Global agricultural production is highly vulnerable as key crops such as maize, wheat, rice, and legumes will be negatively affected by climate change. The study showed that each degree Celsius increase in global mean temperature is estimated to reduce the average global yield of cereal crops by 6-15%. Further, predicted changes in climate may affect water availability and key soil processes such as respiration and nitrogen (N) mineralization, thus key ecosystem functions such as carbon (C) storage, nutrients, and water availability. Although crop growth simulation models are being utilized to understand the impact of climate change scenarios on aboveground biomass, the roots and their architecture, which are essential for plant adaptation and productivity, need to be studied more due to the difficulty of observing them during the plant life cycle. The root system and its architecture are highly responsive to external environmental conditions such as soil moisture, nutrients, temperature, pH and microbial communities; therefore, it is high time to study below-ground responses to future climate scenarios. The study of plant roots represents a highly promising yet underexplored area of research related to plant growth. While the aerial parts of plants have received significant attention due to their visibility and accessibility, the underground portions have been largely overlooked due to the challenges in observing and sampling them and the disruption caused when roots are removed from the soil. Plants’ efficiency of water and mineral nutrient uptake largely depends on how effectively new root tips penetrate soil horizons and how these roots eventually die and decompose. The plant’s ability to access soil resources depends on the size of its root system and the activity of its growing root tips. Root growth is influenced by both genetic factors and environmental conditions. For example, fine root dynamics vary with the seasons, with increased vegetative growth and nutrient release occurring during the monsoon months. (Kumar et al., 2020). Further research is needed to assess how different tillage and water management practices affect rooting behaviours, soil water extraction, and nutrient uptake.

Types of Biomedical Waste

1. Infectious waste: waste contaminated with blood and other bodily fluids (e.g. from discarded diagnostic samples), cultures and stocks of infectious agents from laboratory work (e.g. waste from autopsies and infected animals from laboratories), or waste from patients with infections (e.g. swabs, bandages and disposable medical devices)

2. Pathological waste: human tissues, organs or fluids, body parts and contaminated animal dead bodies

Insecticide based plant protection in India as well as in the world resulted in wide variety of environmental and health issues. Insecticides although gave satisfactory control of target pests initially, have posed serious issues such as resistance, resurgence and residue and also contamination of water bodies, food chain leading serious ill effects in humans, mammals, soil beneficial microbiota etc. After thorough examination of scientific evidences and facts on ill effects of synthetic organic insecticides, much emphasis was given for biological control including parasitoids, predators, entomopathogens, biopesticides, microbial control etc. in order to overcome above ill effects.

Horticulture, the branch of agriculture that deals with the art, science, technology, and business of cultivating plants, plays a vital role in food security, nutrition, and economic development globally. This diverse sector encompasses a wide array of activities, broadly categorized into:
• Pomology: The cultivation of fruits and nuts.
• Olericulture: The cultivation of vegetables.
• Floriculture: The cultivation of ornamental flowering plants.
• Landscape Horticulture: The design, construction, and maintenance of landscapes.
• Post-harvest Handling: The management of horticultural produce after harvest to maintain quality and reduce losses.
Each of these components is intricately linked with weather conditions, making the horticulture sector highly vulnerable to climate change.

Introduction

Climate change and agriculture are interrelated issues, both of which take place on a global scale. Global warming is projected to have significant impacts on conditions affecting agriculture, including fluctuation of temperature, carbon dioxide, glacial run-off, precipitation and the interaction of these factors (Sehgal et al., 2006; Kalra et al., 2008). These conditions determine the carrying capacity of the biosphere to produce enough food for the human population and for domesticated animals. The overall effect of climate change on agriculture will depend on the balance of these effects. Assessment of the effects of global climate changes on agriculture might help to properly anticipate and adapt farming to maximize agricultural production. Droughts, which have frequented different parts of India through the history, have been responsible for many famines, rural poverty and migration despite development of impressive irrigation potentials. Similarly, abnormal temperatures, high velocity winds and humidity during critical stages are known to significantly affect crop growth and development, pest incidences and epidemics, demand on irrigation resources and finally food production. Over the past few decades, the main-induced changes in the climate of the earth due to multifarious human activities linked to develop have become the focus of scientific and social attention. The predicted changes to agriculture vary greatly by region and crop. Findings for wheat and rice are reported here: The study found that increase in temperature (by about 2 ºC) reduces potential grain yield in most places. Regions with higher potential productivity (such as northern India) were relatively less impacted by climate change than areas with lower potential productivity (the reduction in yields was much smaller). Climate change is also predicted to lead to boundary changes in areas suitable for growing certain crops. (Kalra et al., 2002-2003). Reduction in yields as a result of climate change is predicted to be more pronounced for rainfed crops (as opposed to irrigated crops) and under limited water supply situations because there are no coping mechanisms for rainfall variability. The difference in yield is influenced by baseline climate. In sub-tropical environments, the decrease in potential wheat yield ranged from 1.5 to 5.8%, while in tropical areas the decrease was relatively higher, suggesting that warmer regions can expect greater crop losses.

Global warming has become a worldwide concern after feeling the rise of temperature much more clearly after 1990. Global warming has negatively affected agricultural production throughout the world attributed by the climate change parameters. Effects of climate change on horticultural crops reported nowadays include problems of biotic and abiotic stress, yield loss, quality loss, etc. To understand the impact of climate change problems in horticulture, it is prerequisite to comprehend the issues related to global carbon cycle, climate change phenomenon, relationship between climate change variables and direct as well as indirect climate change effects.