eChapters

3.1. Definition

Systems approach to reduce nematode to tolerable levels through predators and parasites, genetically resistant hosts, natural environmental modifications and appropriate nematicides.

Today a number of countries have moved away from the inorganic or chemicalised farming to organic farming yet it is not possible for India to depend entirely upon this system of farming due to increase in human population. As total availability of plant nutrients from different organic sources is projected to 7.75 MT by 2025 against the total requirement of 37.50 MT for 1504 million populations, so it means if we depend on organic sources there would be deficiency of about 30 million tonnes of nutrients.

Protected cultivation of horticultural crops offers the best choice for diversification from traditional agriculture production system for a number of reasons. Production of crops under protected structures has great potential in augmenting production and quality of vegetables, flowers and in some fruit crops in main and off-season and maximizing water and nutrient use efficiency under varied agro-climatic conditions of the country. This becomes relevant to growers in India who have small land holding. They would be interested in a technology, which helps them to produce more crops each year from their land, particularly during off-season when prices are higher. The commonly protected structures are polyhouses, poly-tunnels, floating row covers, clotches, shade-net, insect-proof net and plastic-mulches (Chandra et al., 2000 ; Singh et al. 2010). These protected structures act as physical barrier and play a key role in integrated pest management by preventing spread of insect-pests and viruses which causes severe damage to the crop (Singh et al., 2003). This technology has great potential especially in periurban agriculture in near future, since it can be profitably used for growing high value vegetable crops like tomato, cheery-tomato, coloured peppers, parthenocarpic cucumbers, cut-flowers like rose, carnation, Berbera, lilium and fruits like strawberry, grapes etc. and for off-season cultivation of vegetables and their healthy and virus-free seedling production.

Protected cultivation is intended to mean some level of control over plant micro-climate to alleviate one or more of abiotic stresses for optimum plant growth. The microclimatic parameters being referred here are temperature, light, air-composition and the nature of rooting medium.

All the states have some area under irrigation. Thus the term ‘irrigated ecosystem’is rather loosely defined, and the states having distinctly large net irrigated area may constitute this ecosystem. Two such areas can be easily carved out i.e., Indo-Gangetic Plain region representing five states namely Punjab, Haryana, U.P., Bihar and West Bengal, and coastal areas of two southern states i.e., A.P and Tamil Nadu. About 56% of the net irrigated area of the country exists in these states, and the cropping intensity is also much higher (144%) as against national average of 132%. With demographic viewpoint also, these areas are densely populated. Of late agriculture in this ecosystem has become unsustainable owing to over-exploitation of natural resources. Studies have conclusively established the superiority and worth of integrated nutrient management in restoration of soil health and sustenance of crop productivity and profits.

The basic concept underlying the principles of integrated nutrient management (INM) is the maintenance, and possibly improvement, of soil fertility for sustaining crop productivity on long-term basis. This may be achieved through combined use of all possible sources of nutrients and their scientific management for optimum growth, yield and quality of different crops and cropping systems. INM is not a new concept, but an age-old practice. Its importance was, however, not realized earlier due to low nutrient turn over in soil-plant system and almost all the nutrient needs were met through organic sources, which supplied secondary and micronutrients also besides major nutrients. INM has now assumed great significance mainly because of two reasons. First, the need for continued increase in agricultural production based on increase in per hectare yields requires growing application of nutrients, and the present level of fertiliser production in india is not enough to meet the total plant nutrient requirement. Second, the results of a large number of experiments on manures and fertilisers conducted in india and other countries reveal that neither the chemical fertilisers alone nor the organic sources exclusively can achieve the production sustainability under intensive cropping systems (Hegde and Dwivedi, 1993). Even the so called balanced use of chemical fertilisers would not be able to sustain high productivity due to emergence ofthe deficiencyofone ormore ofthe secondaryandmicronutrients (Swarup and Wanjari, 2000). The interactive advantages of combining organic and inorganic sources of nutrients in INM have proved superior to the use of its each component separately. The advantages of INM can be broadly enumerated as following:

Introduction

The term “Integrated Nutrient Management” refers to the process of ensuring that the fertility of the soil and the delivery of plant nutrients are kept at an optimal level in order to maintain the desired level of production. This is accomplished by using an integrated approach to maximize the advantages that may be obtained from all conceivable sources of organic, inorganic, and biological components. Due to the fact that it supplies plants with anchoring, water, and nutrients, soil is an essential component for crop development. It is common for soils to have a certain amount of organic and mineral nutrient sources; but, in order to improve plant development, it is often necessary to supplement these soils with external treatments, sometimes known as fertilisers. It is common practice to apply fertilizers in order to boost the fertility of the soil, encourage the development of plants, increase crop yields, and provide support for agricultural intensification. Generally speaking, fertilizers may be categorized as either organic or mineral. Manure, compost, seaweed, and cereal straw are all examples of organic fertilizers. Organic fertilizers are created from components that are either plant or animal based. In general, organic fertilizers have lower amounts of plant nutrients because they are coupled with organic matter, which enhances the soil’s physical and biological features. This results in the soil having better qualities. Mineral fertilizers that are based on nitrogen, potassium, and phosphate are the ones that are used the most often. According to the International Food Policy Research Institute (1995), in order to satisfy the ever-increasing demand for food throughout the world, it will be of the utmost significance to make the most efficient and well-balanced use of nutrient inputs from mineral fertilizers. Since 1960, the usage of mineral fertilizer has expanded by approximately fivefold, which has greatly supported the expansion of the world population. According to Smil (2002), nitrogen-based fertilizer has contributed an estimated forty percent to the gains in per-capita food production over the previous fifty years. In spite of this, mineral fertilizers should not be the only means by which crop nutrient needs are satisfied. This is because environmental issues and economic limits make this situation impossible. As a result, Integrated Nutrient Management has to be used in order to encourage the efficient utilization of all nutrient sources, which includes organic sources, recyclable wastes, mineral fertilizers, and biofertilizers (Roy et al, 2006).

Integrated plant nutrition system conceptualized by food and agriculture organization is the maintenance or adjustment of soil fertility and of plant nutrient supply to an optimum level for sustaining the desired productivity through optimization of benefits from all possible sources of plant nutrients viz. organic manures, fertilizers, crop residues, compost or nitrogen fixing crops etc. in an integrated manner.

Introduction

Fruits are an essential component of the human diet, and India holds the position of the second-largest fruit producer worldwide. The nation’s agricultural sector produces banana, papaya, and mango, contributing approximately 13% of the global fruit production. Nevertheless, the present fruit output in India falls short of satisfying 46% of the total demand. Fruits provide a substantial amount of vitamins and minerals that are crucial for sustaining good health and immunity. In addition, they include oils, lipids, and proteins that are used in different metabolic processes.

The overutilization of synthetic fertilizers to enhance fruit yield has resulted in problems such as economic inefficiency, ecological degradation, and potential injury to both plants and consumers. This has resulted in significant issues. In order to meet the requirements of plants and enhance productivity, a significant quantity of nutrients must be supplied to the soil. Continual crop production may result in the gradual depletion of nutrient reserves in the soil, which ultimately leads to soil degradation. Due to the exorbitant expense of inorganic fertilizers, there has been a growing focus on using bio-fertilizers and organic matter with inorganic fertilizers. Farmers are now exploring the use of the Integrated Nutrient Management system for cultivating fruit crops. This system incorporates innovative techniques such as deep fertilizer application and urea coatings to enhance plant absorption of nutrients and minimize nutrient wastage. Ultimately, fruits are essential components of human meals, although their over use has resulted in economic inefficiencies, environmental harm, and land deterioration.

Indian horticulture has shown impressive impact on production, productivity and profitability. Currently, the total production of horticultural produce is 214.7 million tones from the 9% of total cultivated area in India, which contribute 30.4% to GDP of agriculture (Singh, 2010). In world perspective, India is second largest producer of fruits (68.5 mt) from 6.10 m ha area and contributes 11.2% in global fruit production. Vegetable crops occupying 8.0 m ha have the production of 129.1 mt (Table 1). However; India is the largest producer, consumer and exporter of spices and spice products in the world and produce more than 50 spices. The spice production in India is the order of 4.14 mt from an area of about 2.63 m ha. India is also the leading producer of plantation crops in the world and contributes 22.34% in coconut, 25% in cashewnut and 55% in arcanut. Commercial floriculture sector has recorded fast pace of growth during the last decade. During the last decade area under floriculture has expended to 1,67,000 ha with production of 9,87,000 MT of loose flower and 4.8 million cut flowers (Singh, 2010). The over all percent share of fruits and vegetables to their total production and contribution of different states for production of fruits and vegetables are repicted in Fig. 1 & 2. From the above fact, it is indicated that the production of horticulture produce has increased manifold but the gap in demand and supply continues simultaneously and is hardly sufficient and meets only 46% of national demand. Hence, there is a strong need to increase the production and productivity through crop diversification.

Oilseeds serve as rich source of food, feed, energy, employment and commerce. The productivity of oilseeds in India (1006 kg ha^-1 during 200809) is very low when compared with the world productivity (1878 kg ha^-1 during 2008). The oilseeds production in the country often sufers from a high degree of variation in annual production owing to their predominant cultivation under low and uncertain rainfall situations which is further handicapped by input starved conditions with poor crop management. Nutrient and water are the key inputs for crop production. Improving efficiency and factor productivity under complexities of diminishing quality resources and increasing ecoawareness are critical for sustainable oilseeds production.

The vegetable oils consumption in the country is steadily rising and has sharply increased in the last couple of years touching around 14.1 kg head^-1 year^-1 during 2009-10. As per DAC-Rabo Bank, India’s per capita consumption is likely to reach at least 16.38 kg year^-1 by2020 and for a projected population of 1331 million, vegetable oil requirement will be 21.8 million tonnes. This is equivalent to about 66 million tonnes of oilseeds assuming that there is no change in the proportion of different oilseeds produced in the country in the next ten years. Assuming about 20% of vegetable oils contribution from sources like ricebran, cotton seed, coconut, oilpalm, etc., still the country needs to produce about 55 million tonnes of oilseeds by 2020. Considering that the oilseeds production during 2008-09 was just 27.56 million tonnes, the country needs to double oilseeds production in next 10 years requiring a growth rate in excess of 6%

Rice-wheat is a dominant cropping system in the Indo-Gangetic Plains covering approximately an area of 10.5 million ha. Modern agricultural production practices have emphasized the widespread use of fertilizers as a source of nutrients. The continuous use of high levels of chemical fertilizers over a prolonged period, decline in area under legumes and reduction in the use of organic manures has resulted in soil degradation and environmental pollution. It is estimated that the gap between nutrient removal by crops and addition through fertilizers in India will remain at level of 8-10 million tones per annum. Such negative nutrient balances are depleting the soils of their nutrient reserves resulting in acute deficiencies of nutrients. Integrated plant nutrient supply (IPNS) is an important component of sustainable agricultural intensification. The goal of integrated nutrient management (INM) is to integrate the use of all natural and man-made sources of plant nutrients, so as to increase crop productivity in an efficient and environmentally benign manner, without diminishing the capacity of the soil to be productive for present and future generations. The INM is made up of components which possess great diversity in terms of chemical and physical properties, nutrient release efficiencies, positional availability, crop specificity, and farmers’ acceptability. Since organic manures cannot meet the total nutrient needs of modern agriculture, integrated use of nutrients from fertilizers and organic resources seems to be a need of the time. For INM to make desirable progress and find wide acceptance, nutrient supply packages for important agroecological environments need to be developed. These should be technically sound, practically feasible, economically attractive and socially acceptable. Integrated plant nutrient systems can ensure long-term sustainability of agricultural growth through improvement in soil health and will significantly reduce the needs for chemical fertilizers. The complementary use of chemical fertilizers and organic fertilizers may increase the efficiency of chemical fertilizers in order to maintain a high level of crop productivity. Because of low primary nutrient content and thus the need for large applications per unit area, farmers and policy makers are often reluctant to adopt and promote the use of organic fertilizers. The different components of INM possess great diversity in terms of chemical and physical properties and nutrient release patterns.

Introduction

Seed spices include group of annuals whose dried fruit or seeds are used as spices. These are characterised by pungency, strong odour, sweet or bitter taste. Coriander, cumin, fennel and fenugreek occupy largest area among the seed spices. However, ajowan, dil, celery, anise, nigella and caraway having secondary place as far as area and production is concerned. Major area under seed spices is in Rajasthan and Gujarat, and other seed spices producing states are Chattisgarh, Madhya Pradesh, Andhra Pradesh, Tamil Nadu and Uttar Pradesh. The seed spices account for about 36% and 17% of the total area and production of spices in country. The export of seed spices from India during 2008-09 was 4.71 thousand tonnes worth Rs. 54914.8 million rupees. The per cent export growth rate during 1995-96, 2000-01, 2005-06, 2007-08 and 2008-09 was 12.0, 11.0, 8.0, 36.0 and 19.0% in terms of value and 13.0, 3.0, 8, 13.0 and 6.0 in respect of quantity, respectively.

Integrated plant nutrient management includes use of organic manure/ compost, bio-fertilizer, chemical fertilizer, green manuring, residue management, legume based cropping system, use of nutrient-responsive varieties, proper method and time oforganic manure and fertilizer application, soil and water management to minimize the nutrient losses occurring through volatilization, denitrification, runoff and leaching. Application of plant nutrients in proper balance form is also a part of Integrated Plant Nutrient Management (IPNS) system. Supply of nutrients to seed spices in appropriate quantities and at the correct times is essential for economically and environmentally sustainable agriculture. Soil organic matter, crop residues and manures play a vital role in the supply of macro and micronutrients and the transformation between the various organic and inorganic forms often control availability, both for plant uptake and loss to the environment (Aishwath and Vashishtha, 2008; Lal, et al., 2009).

Soybean [Glycine max (L.) Merrill] is the leading oilseed crop in the world. Its area and production are far ahead of other oilseeds at the global level (Table 1). The commercial cultivation of this crop in India started in the early 1970’s. Within a span of 4 decades its spread has been phenomenal and today it occupies around 9.67 million hectares with a production of about 10.22 million with an average productivity of around 1006 kg ha^-1 (DSR, 2010) (Table 2). It is now the fourth largest among field crops after rice, wheat and maize (GOI, 2007) in India and has become the leading oil seed crop surpassing groundnut and mustard and rapeseed. It is contributing nearly 37% to the total oilseeds produced in India. The central India comprising the states of Madhya Pradesh, Maharashtra and Rajasthan account for more than 95% of the total area under this crop. Chhattisgarh, Karnataka, Andhra Pradesh, Uttar Pradesh etc account or the bulk ofthe rest ofthe area. It is predominantly a rainfed crop with only about 3% of the total area getting some assured irrigation facility. Further, it is concentrated in areas which receive lesser rainfall in its early vegetative phase. A large number of crops have been replaced by soybean to a variable extent in its march towards achieving its present position. Badal et al. (2000) have reported that a large number farmers switched over to this crop from sorghum, groundnut, maize, cotton etc in the state of Madhya Pradesh owing to greater yield potential even under adverse conditions (Table 3). Further, it has become an integral part of several cropping systems including both intercropping and-sequential cropping systems in different parts of the country.

Pulses are known for their soil fertility restoration value. Deep rooting, nitrogen fixation, leaf shedding ability and mobilization of insoluble soil nutrients are some of the unique characteristics of pulses. By improving chemical, biological and physical environment in the soil, pulses can arrest the declining trend in productivity of cereal-cereal system. Inclusion of pulses in intensive cereal based system itself is a component of integrated plant nutrient supply system. Therefore, pulses have become viable alternative to improve the soil health and conserve the natural resources and agricultural sustainability. Pulses in the cereal/oilseed based cropping systems are introduced to break the monotony of crop rotation. Pulses being rainfed low input crop provide safeguard against crop failure due to scanty rainfall and adverse weather conditions. Apart from enriching soil fertility, introduction of pulses in cropping system also improves nitrogen economy. Early pigeonpea-wheat sequence was evaluated and found promising than traditional rice-wheat cropping system in irrigated areas of Punjab, Haryana, central and western Uttar Pradesh.

3.1. Integrated nutrient management

Maintenance of soil fertility and plant nutrient supply at an optimum level for sustaining the desired productivity through optimization of all possible sources of organic, inorganic and biological components in an integrated manner.

3.2. Concepts

Regulated nutrient supply for optimum crop growth and higher productivity.

Improvement and maintenance of soil fertility.

Zero adverse impact on agro – ecosystem quality by balanced fertilization of organic manures, inorganic fertilizers and bioinoculants in an integrated manner.

Integrated nutrient management is considered to be the key for achieving higher yield of crops and cropping systems. In general, the productivity of pulse crops has remained low mainly for two reasons: cultivation on agriculturally marginal soils and little if any crop inputs. Among production inputs, fertilizer plays a key role in pulses too like other crops for enhancing productivity levels. Most of the pulses fix atmospheric N, which is the predominant mechanism to meet their N requirement. It can enrich soil fertility by fixing nitrogen. It has been estimated that chickpea can fix (convert atmospheric nitrogen to organic nitrogen which would be available for subsequent crops)up to 140 kg nitrogen per hectare in a growing season, although measured values are usually in the range of about 20-60 kg nitrogen per hectare (Reddy 2004). It has been well established that long duration pigeonpea in northern India can fix nitrogen in the order of 200 kg/ha when grown over a 40 week period. Pigeonpea can also have substantial residual effects on subsequent crops. For example, medium-duration pigeonpea grown at the International Crop Research Institute for Semi-Arid Tropics (ICRISAT) (Asia Centre) could benefit a subsequent maize crop to an extent equivalent to 40 kg nitrogen per hectare. However, this capability is jeopardized through insufficient supply of other plant nutrients. General recommendations for phosphorus (P) fertilization are made in most states. However, K application is generally neglected, resulting in imbalanced nutrient supply and lower crop yields. Under intensive cropping systems, large amounts of K are removed, leading to serious depletion of soil K reserves. Pulses such as chickpea and pigeonpea remove about 60 and 52 kg K₂O/t of grain, respectively. Information compiled from various sources on integrated nutrient management in pulse/pulse based cropping systems in different agroecological regions of the country suggest that there is a wide scope for practicing integrated plant nutrient (IPN) practices in pulses and pulse based cropping systems. Practicing of INM not only economize inorganic fertilizer use but also helps in balanced fertilization and improving soil health and productivity through complimentaryeffects of fixed N by pulses and applied phosphorus and potassium.

The introduction of high-yielding varieties of wheat and rice, the development of intensive cereal–cereal rotations (rice–wheat, rice–rice, hybrid maize–wheat), application of high doses of N (above 100 kg N ha^–1 to each crop) without adequate P and K application, increased use of high-analysis fertilizer (urea and diammonium phosphate in place of ammonium sulphate and superphosphate) and ignoring the application of organic manures led to heavy depletion of P, K, S, Zn and other plant nutrients, which led to wide-spread de?ciencies of P, S and Zn in Indian soils. These de?ciencies of nutrients led to focus on integrated nutrient management.

Farming system approach addresses itself to each of the farmer enterprises; inter relationship among enterprises and between the farm and environment. Thus farming system research has the objective of increasing productivity of various enterprises in the farm. Farming system approach introduces a change in farming technique for high production from a farm as a whole with the integration of all the enterprises. The farm produce other than the economic products for which the crop is grown can be better utilized for productive purposes in the farming system approach. A judicious mix of cropping system with associated enterprises like dairy, poultry, piggery, fishery, sericulture etc. suited to the given agro-climatic conditions and socio economic status of farmers would bring prosperity to the farmer.

Combination of Integrated farming system (IFS) along with organic farming so called integrated organic farming system (IOFS)appear to be the possible solution to the continuous increase of demand for food production, stability of income and improvement of nutrition for the small and marginal farmers with limited resources. Integration of different enterprises with crop activity as base will provide ways to recycle products and waste materials of one component as input through another linked component and reduce the cost of production of the products which will finally raise the total income of the farm. This becomes quite essential as crop cultivation is subjected to a high degree of risk and provides only seasonal, irregular and uncertain income and employment to the farmers. With a view to mitigate the risk and uncertainty in agriculture, IOFS serves as an informal insurance.

Production of agricultural crops, vary in response to changes of the seasons. In the recent period stable income of agricultural crops has become unstable. Redressing these by integrating crops with agro-based industries like livestock farming is essential. An integrated organic farming system applies the concept of “Low External Input Sustainable Agriculture” (LEISA) and this system develops the livestock business and the crop business in one location or area using local resources to optimize inputs. Designing a farming system to tie together principles of sustainability and productivity is complex. Organic farmers must consider how the various components of their system - rotations, pest and weed management, and soil health - will maintain both productivity and profitability. This section outlines the major principles incorporated into organic farming systems.

The integrated pest management is a set of effective and environmentally safe pest management practices that takes advantages of all appropriate pest management options including, but not limited to, the judicious use of pesticides. The comprehensive information on the life cycles of pests and their interaction with the environment, and the available pest control methods are used to manage pest damage by the most economical means, and with the least possible hazard to people, property, and the environment. 

Introduction

The development of Integrated Pest Management (IPM) was a response to the steadily increasing use of pesticides, which led to crises in pest control (outbreaks of secondary pests and pest resurgence following the development of pesticide resistance), as well as an increase in evidence and awareness of the full costs that the intensive use of pesticides imposes on human health and the environment. The term “Integrated Pest Management” (IPM) refers to the process of carefully considering all of the available methods of pest management and then subsequently incorporating suitable strategies that prevent the growth of pest populations. It integrates biological, chemical, physical, and crop-specific (cultural) management tactics and practices in order to cultivate healthy crops and avoid the use of pesticides. This helps to reduce or eliminate the hazards that pesticides cause to human health and the environment, which is essential for sustainable pest control. IPM is a dynamic process that makes use of an ecological systems approach and encourages the user or producer to examine and employ the complete range of optimal pest management choices available given economic, environmental, and social factors. IPM is accomplished via the use of an ecological systems approach. Integrated Pest Management (IPM) is founded on ecology, the idea of ecosystems, and the objective of maintaining ecosystem processes. Additionally, it stimulates the use of natural pest management techniques, which in turn promotes the establishment of a healthy crop while causing the least amount of damage to agroecosystems as feasible.

Introduction

Integrated Pest Management (IPM) represents a holistic approach to managing pest populations in horticultural crops, aiming to minimize the use of chemical pesticides while ensuring sustainable and economically viable crop production. IPM integrates multiple strategies—cultural, biological, mechanical, and chemical—within a coordinated framework, emphasizing ecological balance and long-term pest suppression. This article provides a comprehensive overview of IPM principles, methodologies, and applications in horticultural crops, addressing the ecological, economic, and regulatory dimensions of this essential agricultural practice.

Principles of IPM

Ecological Approach

IPM is fundamentally an ecological approach that considers the complex interactions between pests, crops, and the environment. By understanding these interactions, IPM seeks to manipulate ecosystems to favour natural pest control mechanisms and reduce the need for synthetic chemical inputs.