eChapters

Nano-materials are to be extensively studied and characterized prior to their application in material science, biological science, electrical and electronics. In addition to the basic physical properties of the nano-materials, other characteristics such as paramagnetism, ferromagnetism, supermagnetism, optical properties, quantum size effects and electrical properties have to be studied. With a view to provide the fundamental information on these aspects this chapter is dedicated.

In India rice is cultivated under two land situations. In uplands, rice is grown under rainfed conditions and the yield is normally low. In medium or low land conditions rice is grown under wet condition where plenty of rain water or irrigation water is available. Here an intensive tillage is practiced in wet to create a soft puddle condition and then paddy is transplanted. Land submergence is thus an essential condition for successful rice cultivation.

Rice soils are not necessarily soils with water at or near the surface. Many soils have a fairly deep water table, but their surface is kept under submergence maintaining depth of 3-5 cm water. This condition is maintained either by puddling when wet or by having a compacted layer in the sub surface.

A rice soil is characterized by reducing conditions, when it is cropped with rice during wet season and oxidizing conditions during dry season, when the land remained fallow or planted with dry season crops if, irrigation water is available.

The atmosphere near Earth’s surface, often referred to as the boundary layer, exhibits unique properties influenced by the interaction between the surface and the atmosphere. These properties are crucial for understanding weather patterns, climate, and various environmental processes. Ancient Indians use to worship five natural elements i.e. earth, water, air, energy and the sky. Perhaps they were aware of the interactive effects and processes between these 5 elements that govern life on earth. In a sense, meteorology itself is a science based on interactive effects of these natural elements. Microclimatology is all about the effect of the interactions between these 5 elements on life over the earth. For a beginner of microclimatology, it is important to understand the properties of the atmosphere near the earth’s surface and get familiar with the concept and terminology used to describe/quantify the physical processes taking place between the lower layers of the atmosphere and the earth’s surface.
2.1. Energy
The major source of energy in the earth atmosphere system is solar energy (Fig.2.1). The outer surface of the sun is very hot and its temperature is estimated to be around 6000°Kelvin (symbol K).
The Kelvin is the base unit of temperature in the international system of units (SI). The Kelvin scale is the absolute temperature scale that begins at the lowest possible temperature that can be attained (absolute zero) taken as 0 degree K. The magnitude or value of each degree of temperature in the Centigrade scale and Kelvin scale is same. The temperature measured in centigrade scale can be converted to Kelvin scale by adding 273.15. The sun emits heat energy in the form of solar radiation. As the solar radiation passes through the atmosphere, it gets partly depleted before reaching the earth’s surface. The processes through which the solar radiation gets depleted in the

1. Introduction Proso millet (Panicum miliaceum (L.) belongs to the grass family Paniceae. It is a perennial cropthat grows in summer each year as late-seeded summer crop (Figure 1). Its origin can be traced back to at least 2000 B.C. when it was said to be grown in the Central European regions. Proso millet plant thrives in dry areas such as Africa, Central Russia, Manchuria, Middle East and Northern India and North America’s Great Plains. Proso millet was introduced to Canada in the 17th century and used sparingly as a feed crop in the early 1900s (Rajasekaran and Francis, 2021). This is a low-demand crop and is utilised in organic farming systems across Europe and as an intercrop in the United States. Its shallow root system and resistance to atrazine residue make it a great intercrop between two crops that need a lot of water and pesticides. The last crop’s stubbles entrap more heat into the soil which promotes faster and earlier growth of millet. Hence, it can help to evade summer drought and achieve continual crop rotation (Kalinova and Moudry, 2006). It is an erect herbaceous annual crop with a lot of tillering. Its plant can reach a height of 45-100 centimetres. The stem is thin, with prominently enlarged nodes. The roots are thin and fibrous.

1.1 Introduction Among the C4 grasses known as panicoids (subfamily: panicoideae), which also includes nutrient-rich cereals like millets and sorghum as well as commercially valuable crops like switchgrass, napier grass, and guinea grass, are bioenergy feedstocks like sugarcane and miscanthus. Among all, millets overpowered others in terms of biotic/abiotic stress resilience, resource sustainability as well as nutritional benefits. Minor millets, often known as nutritional cereals, are a type of small-seeded grains that are members of the Poaceae family. Up to 35 kinds of grass from 20 genera are well-known for being minor millets. Finger millet, foxtail, proso millet, barnyard millet, kodo millet, and little millet are the most significant small millets that are grown worldwide. India is the leading producer and consumer of millet crops and their products. The total area of small millets in India is around 1.63 m ha, with a production of 1.82 m tones during the year 2016- 17 (Annual progress report 2018-19, ICAR-AICRP on small millets).

SUMMARY

Green manuring is the practice of growing lush plants on the site into which organic matter directly incorporate to the soil while it is still fresh. Green manures, often known as cover crops, are plants which are grown to improve the structure and nutrient content of the soil. They are a cheap alternative to artificial fertilizers and an eco-friendly input for organic farming and can be used to complement animal manures. Growing a green manure is not the same as simply growing a legume crop, such as beans, in a rotation. Green manures are usually dug into the soil when the plants are still young, before they produce any crop and often before they flower. They are grown for their green leafy material which is high in nutrients and protects the soil. It is basically a holistic management system, which promotes and improves the health of the agro-ecosystem related to biodiversity, nutrient biocycles, soil microbial and biochemical activities.

Introduction

Persistent income from agriculture is most important for sustaining the farming sector. Conservation agriculture (CA) is a resource-saving agricultural production system that aims to achieve production intensification and high yields while enhancing the natural resource base through compliance with three interrelated principles, along with other good production practices of plant nutrition and pest management (Abrol and Sangar, 2006). Conservation agriculture is largely promoted as one of the few win–win technologies affordable to farmers, in the sense that potentially it improves farmers’ yields (in the long term) at the same time conserving the environment. CA is described by FAO (http://www.fao.org.ag/ca) as a concept for resource saving agricultural crop production which is based on enhancing the natural and biological processes above and below the ground. As per FAO definition CA is to a.) Achieve acceptable profits, b.) High and sustained production levels, and c.) Conserve the environment. It aims at reversing the process of degradation inherent to the conventional agricultural practices like intensive agriculture, burning/removal of crop residues. Shifting from tillage-based agriculture to no-tillage CA systems removes unsustainable elements in the current tillage based systems and replaces them with CA elements that make the production systems profitable and ecologically sustainable. Conservation agriculture offers an opportunity for arresting and reversing the downward spiral of resource degradation, decreasing cultivation costs and making agriculture more resource – use-efficient, competitive and sustainable.

Abstract
Milk, recognized globally as a complete food, is rich in essential nutrients like calcium, amino acids, and bioactive compounds, offering numerous health benefits such as antimicrobial, antihypertensive, and anti-carcinogenic properties. India, the world’s largest milk producer with 170 million tonnes annually (20% of global production), is witnessing rapid growth in its dairy industry, projected to reach a market value of Rs. 10 trillion by 2025. The sector, driven by modernization, cooperatives, and increasing consumer demand for value-added products like ghee, cheese, and probiotics, presents vast entrepreneurial opportunities in dairy farming, processing, retail, and machinery manufacturing. However, challenges such as poor hygiene, inadequate cold chains, and livestock health issues hinder quality and scalability. Emerging processing technologies and adherence to FSSAI regulations can enhance product quality and market potential, making dairy enterprises a cornerstone of India’s food industry and rural economy.
Keywords: Dairy Industry, Milk Production, Agri-preneurship, Value-Added Products, Food Safety, FSSAI Regulations, Livestock Management, Probiotics, Cold Chain, Sustainable Development

Agroforestry is a collective name for land-use systems and technologies in which woody perennials including trees, shrubs, bamboos etc. are deliberately combined on the same land-management unit with herbaceous crops or animals either in some form of spatial arrangement or temporal sequence. In agroforestry system there are both ecological and economic interactions amongst the different components (Lundgren and Raintree, 1982). The origin of agroforestry practices, i.e. growing trees with food crops and grasses, is believed to have been during Vedic era (Ancient period, 1000 B.C.), the agro-forestry as a science is introduced only recently. Agro-forestry is the science of designing and developing integrated, self-sustainable, land-management systems that involves the introduction and retention of woody components such as trees, shrubs, bamboos, canes and palms along with agricultural crops including pastures or animals, simultaneously or sequentially on the same unit of land and time, to satisfy the ecological as well as socio-economic needs of people. This practice of growing trees and arable crops together on the same piece of land is an age-old practice with the dry land farmers. Agroforestry results in multiple products, increases income, reduces runoff and soil loss, utilizes off-season rainfall and radiation and gives stability to dry land agriculture. Further it makes the future generation farmers to inherit not only the land of their predecessors, but also the wealth of standing biomass of trees.

National Forest Policy (1988) has set a goal that 33% of the country’s geographical area should be under forest and tree cover. Under Tenth Five Year Plan, the Government of India has set a target to increase the country’s forest cover up to 25%. According to the latest report of Forest Survey of India (2013), the forest cover in the country is 697,898 km², constituting 21.23% of its total geographical area. Out of this, dense forest constitutes 12.24 % and open forest 8.99 %. The only solution to achieve these targets is through the practice of agroforestry. Therefore, in the quest of optimising productivity, the multi-tier system came into existence.

Since the 1960s, the world population has doubled from three to seven billion, and this trend will persist in the coming decades. Because of this rapid expansion, a massive increase in crop production is required to meet the food and energy demands of future generations. Potassium is the third important plant nutrient after nitrogen and phosphorous. It is seventh most abundant element in the lithosphere. Being chemically active metal, it is never found in its pure elemental state in nature. Potassium (K) plays a particularly crucial role in a number of physiological processes vital to growth, yield, quality, and stress resistance of all crops. The K content of Indian soils varies from less than 0.5–3.0%. The average total potassium content of those soils is 1.52% (Mengel and Kirkby 1987).

The role of mechanization has of late earned considerable significance in Indian agrarian sector following the unprecedented hike in labour cost, migration of agricultural labour to the urban localities for better remuneration and most importantly, the rising concern of rural youth today for more comfort as well as social dignity and status. Furthermore, mechanization has been extremely supportive to enhance the efficacy of the vital inputs to agriculture such as high yielding seeds, fertilizer, water, pesticides etc resulting in higher production and productivity. One more significant contribution of mechanization is timely completion of various operations with qualitative and quantitative competence apart from reduction in drudgery; thus motivates the farmer to dare for higher initial investments in anticipation of rich dividends over a period of time.

1. Introduction
The environment and human health are seriously threatened by contaminants,both organic and inorganic, whose prevalence and persistence have beensteadily rising in recent years. In addition to propelling economic and scientificadvancement, the industrial revolutions of the 19th and 20th centuries have alsoled to widespread pollution (Wuana & Okieimen, 2011; Singh et al., 2013).Industrial activity has increased trace metal concentrations in the environment,with sediments acting as key sources and reservoirs for heavy metals. Thesemetals build up in soils and aquatic bodies as a result of scouring, erosion,rainfallleaching, wastewater discharge, and atmospheric deposition (AlonsoCastillo et al., 2013). Additionally, toxic contaminants like phenols, industrialeffluents, domestic wastewater, agricultural runoff, fly ash, fertilizers, andwaste from insecticides, pesticides, and pharmaceutical industries infiltratethe environment and food chain via mechanisms such as bioaccumulation,biomagnification, and bioconcentration (Arora & Bae, 2014; Azubuike et al.,2016).

Introduction

Natural resources, especially those of soil, water, plant and animal diversity, vegetation cover, renewable energy resources, climate, and ecosystem services are fundamental for the structure and function of agricultural systems and for social and environmental sustainability, in support of life on earth. Historically the path of global agricultural development has been narrowly focused on increased productivity rather than on a more holistic integration of natural resource management with food and nutritional security. A holistic, or system-oriented approach, is preferable because it can address the issues associated with the complexity of food and other production systems in different ecologies, locations and cultures. Modern agriculture largely depends on the use of fossil fuel-based inputs, such as chemical fertilizers, pesticides, herbicides and energy intensive farm machinery. While the applications of such high input technologies have undoubtedly increased production and labour efficiency. There is a growing concern over their adverse effect on soil productivity and environmental quality which is emerging to recognize that the farmer has a great social responsibility as a land owner than merely agribusiness considerations. Therefore, there is need to develop agricultural techniques that are ecologically sound, economically viable, and socially responsible. Sustainable agriculture in the context of development helps to achieve production efficiency, protect ecosystem functions, enhance resilience to climate change, ensure healthy communities, satisfies basic needs and ensures optimum use/conservation of natural resources. Organic/biodynamic farming is among the various types of sustainable agriculture. Traditionally these methods has been playing very vital role in the conservation of natural resources in terms of soil health sustenance, environmental protection, food safety, waste recycling, biodiversity conservation with an economically viable approach. The chapter discusses the role of organic/biodynamic agriculture in natural resource conservation.

Abstract

Northeast is famous for its rich bio-diversity and Himalayan scenic beauty. Society is mainly agricultural based but the crop productivity is low in comparison to all India average. Major reasons are lacking of a). Improved cultivation technology at village or at farmers level, b). Agricultural inputs like high yielding seeds, chemical fertilizers and pesticides due to poor infrastructural facility, c). Land tenure system, etc. The agro climatic condition is very suitable to grow different types of vegetables round the year. Hilly areas offer a scope to grow certain vegetables as off-season vegetables and earn a high price. Northeast soils need application of nutrients for improving its productivity. Century old Jhoom cultivation technique, high soil erosions in hilly areas and regular floods in plains also play a vital role in developing reluctance among farmers in using costly chemical fertilizers. Profuse growth of vegetations e.g. grasses; weeds, jungles, etc. are noticed due to regular rainfall throughout northeast. Peoples usually burn these during clearing their fields and backyards for cultivation. These can be converted to good quality compost using vermicomposting technique and added to field for cultivation of different crops substituting chemical fertilizers. Experiments on cabbage, cauliflower, French bean, okra, onion and tomato showed that yield increased considerably with the application of compost in field.

India has made a considerable progress during the last three decades in horticulture production in India producing 300.6 million tonnes of horticultural produce from 24.85 million hectares in 2016-17. The average productivity of different horticultural crops is quite low as compared to the best yields at national and world level, indicating the scope to enhance the yield in different horticultural crops by many fold along with its quality specially in vegetables. Unlike vegetables, flower cultivation is growing at a very fast speed and registered a marked growth along with employment generation through protected cultivation. According to NHB (National Horticulture Board), during the year 2014-15 the area under floriculture production in India was 248.51 thousand hectares with a production of 1,658 thousand tonnes loose flowers and 484 thousand tonnes cut flowers. However, India’s total export of floriculture was Rs. 548.74 crores/ 82.05 USD Millions in 2016-17. This is because of an appealing gap between potential yield and the actual yield of various vegetable crops. In many vegetable crops, the yields realized are even less than 50 % of their potential yield. Due to fluctuating market prices and poor storage infrastructure available for horticultural crops, farmers are not able to get their production cost. Though, there are some crops, fetches high prices during off-season. Several biotic and abiotic stresses are major factors, responsible for low productivity and poor quality in several horticultural crops under their open field cultivation during rainy and post rainy season more specifically, in vegetables. The increasing demand of off-season and high quality vegetables in various markets of the big cities has drawn the attention of the vegetable growers for diversification from traditional system.

India is endowed with diverse agro- climatic conditions which facilitate to cultivate various horticultural crops all through the year in one part of the country or others, but the quality of fruits under open field conditions particularly in high value crops (vegetables & flowers) by and large fall short of domestic and international markets standards. Some time there no guarantee of consistent production of from open cultivation, as the crop is exposed to number of environmental factors that changes frequently. Hence it is imperative to increase the productivity and quality of produce to meet the demand of quality conscious consumers. A break through in production technology that integrates market driven quality parameters with the production system simultaneously ensuring a vertical growth is warranted. In this context, most important technology is the Controlled Environment Agriculture (CEA) i.e. Protected Cultivated Technology (PCTs) such as greenhouse, net house, glasshouse and low tunnel. “Protected cultivation” means modification of plant environment to achieve optimum plant growth avoiding the harmful effect of climatic factors.

Protected Cultivation

Protected cultivation (PC) may be defined as the “modification of the natural environment to achieve optimum plant growth” (Singh, 2005). Modifications can be made to both the aerial and root environments to increase crop yields, extend the growing season and permit plant growth during periods of the year not commonly used to grow open field crops. PC may also indicate comprehensive systems of ‘Controlled Environmental Agriculture’ in which all the aspects of natural environment are modified for maximum plant growth and economic return.

Abstract
India faces a shortfall of 10 million tonnes in vegetable production against a demand of 135 million tonnes, exacerbated by extreme temperatures (5-48°C) that hinder year-round cultivation. Protected cultivation, including greenhouses, polyhouses, and shade nets, offers a solution by enabling off-season vegetable production, enhancing yield, quality, and input efficiency. In regions like Bundelkhand, where agriculture dominates the economy, low-cost protected structures have shown promise in cultivating high-value crops like tomatoes and capsicum, despite challenges such as farmer unawareness, limited capital, and poor infrastructure. Government initiatives, like those by Banda University of Agriculture and Technology, promote low-cost protected cultivation through training and infrastructure development, fostering agripreneurship and improving rural livelihoods by increasing yields and market prices.
Keywords: Protected Cultivation, Vegetable Production, Agripreneurship, Greenhouse Technology, Bundelkhand, Food Security, High-Value Crops, Low- Cost Structures, Rural Development, Input Efficiency

Protected cultivation provides controlled or modified growing environments that enable horticultural crops to be produced beyond their normal climatic limitations. This chapter covers greenhouses, polyhouses, shade nets, insect-proof structures, tunnels, and other protected systems. It explains environmental factors such as temperature, humidity, light, ventilation, carbon dioxide, irrigation, and fertigation. Protected cultivation can improve productivity, quality, resource-use efficiency, and production timing while reducing exposure to adverse weather and certain pests. The chapter also discusses crop selection, substrate culture, automation, and integrated management. Proper environmental control and economic planning are essential because protected systems involve higher initial investment but can generate high returns through quality produce and extended market opportunities.