eChapters

5.1. Emergence of Service Area Approach

During the five years ended 1985-86

Gross value added in agricultural sector: 2.70% per annum.

Share of agriculture in total net domestic product declined from 39.80% to 35.40%.

Food grains production increased from 133.30 million tons to 150.50 million tons by 18%

In contrast, there was 41% increase in outstanding level of credit for agriculture from rural lending agencies viz., Co-operatives, RRBs and CBs between June 1981 and June 1986.

Share of Haryana, Punjab and U.P. in total food grains production was around 38% accounted for 75% increase in food grains output.

However, their share in the total institutional credit was 22% only.

The earlier view was that the cultivated sesame originated from Ethiopia. But Bedigian and Harlen (1984) established evidence to indicate that sesame is native of India. In vedic period, liberal mention about Til (Gingelly seed) and Taila (Gingelly oil) are mentioned. The Charred seeds of Gingelly were extracted from Harappa (2500-1500 B.C).

The research locale is a crucial aspect of any research study because it can have a significant impact on the data collected, the results obtained, and the conclusions drawn from the research. The selection of the research locale should be based on the research questions, objectives, and methodology of the study. The characteristics of the research locale such as its physical, social, cultural, and economic attributes, and the population being studied, can affect the research outcomes.

To accurately understand and interpret the data, used in social science research, it is necessary to have a thorough understanding of the attitude, behaviour and characteristics of the individuals who live in the area being studied. This section of the research critically examines the socio-demographic background of local people in a rural setting. The research setting refers to the context in which the research is conducted, and it plays a crucial role in shaping the interplay of different factors and components that influence the study’s outcomes. The research setting is essential because it provides a contextual framework that helps to inform the researcher’s interpretation of the data. By understanding the characteristics and context of the research area, the researcher can more accurately conceptualize and interpret the data, leading to a more nuanced understanding of the implications and behavioural complexities of the individual and the larger community.

3.1 Introduction

In developing and in semi-developed countries, rural-urban migration is driven by the uneven distribution of employment, income-opportunities etc. (Skeldon, 1990). Rapid population growth, especially in rural areas, provides an important demographic backdrop to these rural-urban population shifts. Given the growing and well-known difficulties that are faced by the overall Indian population in f inding productive employment, it is important to study the characteristics of labors that migrate from rural-urban areas. Under this backdrop, attempts have been made in this study to examine the nature, pattern and determinants of rural urban migration and the spread of urban informal sector and the likely impact of rural-urban migration on agricultural productivity and efficiency.

Sexual propagation through seeds is a fundamental method for producing horticultural crops, rootstocks, and planting material. This chapter explains seed structure, quality, viability, dormancy, germination, and factors affecting successful seedling establishment. Different types of seed dormancy and methods for overcoming dormancy are discussed, including scarification, stratification, chemical treatments, temperature management, and appropriate moisture conditions. Seed testing and quality considerations are important for obtaining uniform and healthy plants. The chapter also emphasizes the influence of temperature, oxygen, water, light, and substrate conditions on germination. Understanding seed biology enables students and growers to produce vigorous seedlings and establish reliable nursery and crop-production systems.

Introduction

Shaping machine, shaping machine is a heavy commercial machine used for generating flat surfaces on the workpiece as per the requirement. It is specifically designed to give the desired shape to the workpiece which can be flat, horizontal, or vertical as per the requirement.

The shaper machine is a reciprocating type of machine (that is, the machine that converts the rotatory motion into the linear motion) in which the tool reciprocates with the forward and backward stroke removing the metal form of metal chips and turning the Metal workpiece into the desired shape.

India’s Northeast region — one of natural beauty and cultural richness — is both a mega-biodiversity area as well as a “hot-spot” for genetic erosion. The rural population is around 82 per cent and depends largely on agriculture and allied sectors for work and income security. The forests harbour 8000 out of the 15,000 species of flowering plants occurring in the country. Of about 1300 species of orchids reported from India, the Northeast has the highest concentration with about 700 species. The species richness is highest in Arunachal Pradesh where over 5000 flowering plants occur and the lowest in Tripura with 1600 species. Bamboo is the lifeline of the Northeast and 63 out of 136 species found in India occur in this region. Sadly, however, 25 species of bamboo fall under the rare and endangered category. The region is also home to the eri and muga silkworms. The yak and the mithun are unique animals which are threatened by the spread of non-edible invasive species like Lantana, Eupatorium and Mekenia. The cultural diversity of this region is well known, with 225 tribes out of 450 in the country living here. 

Summary

Reaching large-scale implementation should be the overriding objective of all projects that have successfully ISFM practices to share provide markets support them. All too often ISFM results are only reported in peer-reviewed journals that are not accessible outside the research community.
 
Funding agencies often fail to make the production of extension materials an integral and mandatory requirement of research projects.
Unfortunately, in the past, adoption of economically proven technology has often been poor. Some of the reasons include:

A lot of infrastructure in the form of sheep breeding or production facilities such as sheep breeding research stations with adequate number of animals have been established and research technologies generated. The research technologies generated have however not been fully adopted by State Animal Husbandry Departments in the field except in Jammu & Kashmir, Himachal Pradesh and Parts of Rajasthan because of artificial insemination under field conditions due to migratory and semi-migratory practices in sheep husbandry, illiteracy among sheep farmers, their prejudices and convictions and difficulties in the preservation and storage of ram semen and main power requirement.

There is need to study the factors associated with adoption and rejection of sheep rearing as a subsidiary occupation and to know the attitude and knowledge of rural people. So that measures could be suggested to bring greater adoption of sheep rearing. The present study was undertaken to reveal the knowledge and attitude of adopters and non-adopters towards sheep rearing with the identification of factors helping and hindering the adoption of sheep rearing enterprise.

This chapter deals with the review of problems, objectives, hypothesis, research methodology and summary of major findings and conclusions based upon them. In addition, recommendations have also been made to accelerate adoption of sheep rearing programme in the five villages of Block Rajouri, District Rajouri, Jammu and Kashmir.

The present study was conducted to measure the knowledge and attitude of rural people towards sheep rearing and to find out the factors responsible for adoption and rejection of sheep rearing. Suitable measures are therefore suggested to bring greater adoption of sheep rearing in the hills of Jammu & Kashmir.

Introduction

A sheet metal shop is a kind of workshop where different types of materials are used to make sheet metal and then it is flattened into thin sheets of desired shape and size. Sheet metals are used for the production of automobile bodies, utensils, almirah and cabinet appliances, etc.Sheet metal parts have many advantages, like they are less expensive, lighter in weight and can be modified into versatile shapes. Low-carbon steel is commonly used. The use of casting and machining is being replaced by metal stamping. The stamping press is a kind of machine tool in which most of the operations occur, and the sheet metal products which are obtained by the machine are called stampings.

The various adverse effects of Shifting cultivation, the need for its replacement have been widely discussed at various levels. It has been a matter of concern not only for the Government of India and the Planning Commission but also to the various state governments and the union territories of the region. Although considerable data on the extent of Shifting cultivation and its various adverse effects including its effect on agricultural production have been discussed in various forums, yet detailed scientific studies on shifting cultivation from various angles were not taken up until recently. The prevalence of shifting cultivation is so extensive in the region that it would not be possible to tackle the problem within a short period of time whatever, large the efforts may be. It will, thus, be necessary to approach the problem so that alternative systems of farming can be introduced in areas where the cycle of rotation has been greatly reduced.

Agriculture is an important economic activity for a large population of the developing world. The view that industrialization is the main hope of the developing countries has undergone remarkable changes in more recent times. Today, agriculture and rural development are viewed as the sine qua non of national development. A reorientation where in rural development is well balanced with industrial growth is now considered essential to correct serious imbalances in the economy, for equitable distribution of wealth and for social justice. It is against this background that increases in agricultural production in the developing world need to be viewed and evaluated.

Introduction

Shifting cultivation, developed over centuries of experience is known as “Swidden”, “Slash-and–burn agriculture”, “Rotational bush-fallow agriculture.’ or by a variety of local names; in India, it is commonly referred to as Jhum cultivation. This farming system is believed to have originated in the Neolithic period around 7000 B.C. This is the most primitive form of agriculture and is still common amongst the tribal people in various pockets. Shifting cultivation is mainly confined to medium to high rainfall zones between 100 meters and 2,000 meters above sea level. It is practised in three types of vegetation, such as forests, bush and grasslands.

1. Introduction

Arid lands, the “dry domains”, cover ~ 32 % of the continental surface of the world. This geographical region is defined by low precipitation and usually highly variable rainfall patterns (Heathcote, 1983; Groombridge, 1992; Watson et al., 1995). These lands are extremely diverse with respect to landforms, soils, fauna, flora, water balance, human activities and the binding element of all arid lands.

Abstract
 
Within the time scale for soil formation, humans appeared to the planet within the last 1 million years. They shifted their lifestyle from hunter-gatherer to nomadic animal husbandry and finally to cultivation of domesticated crops only within the last 10,000 yrs. Earlier, these crops were cultured in a semi-nomadic style as land was plentiful, so when soil lost its productivity, people abandoned it in favor of new-land. Gradually, as land became scarcer and population exploded, agriculture evolved to continuous cropping of the same parcel of land. This discovered the major concern for soil health. As organic matter is key to soil health, humus is the last stage of organic matter decomposition. Humus is a complex aggregate of dark brown colored amorphous substances, which have originated during the decomposition of plant and animal residues by microorganisms, under aerobic and anaerobic conditions. Humus and living microorganisms are connected by numerous ways which must be appreciated in order to understand the origin and nature of humus. Our attempt is to narrate the role of organic matter and vital role of microbes in humification process.

Abstract

Sabatayn basin is one of the two mature basins producing oil and gas in Yemen. Due to the recent decline in oil production, the exploration activities have been extensively concentrated mainly on these two basins (Sabatayn and Sayun-Masilah). So, this present study has been conducted to evaluate the exploration potential of the remaining trap areas within these mature basins. Fractured basement of reservoir becomes very attractive exploration target in Yemen recently, after the recent discoveries of basement fractured oil fields. As the evaluation of basement traps needs time and fund, to reduce the same, this research study uses a new technique which was devised with the help of Geoinformatics by analyzing the surface and subsurface lineaments effectively. In this study, a satellite image Enhanced Thematic Mapper (ETM+7) based analysis was conducted for extracting surface lineaments, and for the subsurface lineaments, the basement lineaments were extracted from seismic, magnetic and gravity data. An orientation analysis of these surface and subsurface linear features was performed to detect the basic structural grains of the study area. The correlation between these structural grains and subsurface oil and gas traps was performed to understand the connectivity to the reservoirs. This paper discusses in detail about the same and the importance of using surface and subsurface lineament analysis for delineating hydrocarbon reservoirs in the study area.

Silage is preserved pasture. Fresh forage crops such as maize, grasses, legumes, wheat and lucerne can be preserved by ensiling. Silage is the green material produced by controlled fermentation of the green fodder crop retaining the high moisture content, which contain 20-40% dry matter.

Silage can be prepared from plants having thick stems and are generally not very suitable for hay making like sorghum, maize. Weeds can also be utilized along with main fodder crops for silage making. Silage making kills majority of weed seeds. It is highly palatable. The organic acids produced in the silage are similar to those normally produced in the digestive tract of the ruminants and therefore are used in the same manner.

1.1. Sericulture

Refer to rearing of silkworms for the production of raw silk.

Major activities are mulberry cultivation, silkworms spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits.

Bombyx mori is the most widely used. Silk-fiber is a protein produced from the silk-glands (modified labial glands) of silkworms.

11.1 Introduction

The term “regression” literally means moving back towards the average. It was first introduced by the British biometrician Sir Francis Galton (1822-1911). in connection with the inheritance with the stature.

a) Definition

Regression analysis is a mathematical measure of the average relationship between two or more variables in terms of the original units of data.

In regression analysis, there are two types of variables. The variable whose value is influenced and is to be predicted, is known as the dependent (or predicted/ response explained) variable and the variable that influences the values of the dependent variable or is used for prediction purposes, is known as the independent (predictor/explanatory/ auxiliary/ regressor) variable.

7.1 Introduction

The integral calculus is concerned with the opeartion of “integration” which is the reverse process of differentiation. If f '(x) represents the differential coefficient of f '(x), then the problem of integration is to find f(x) from f '(x).

7.2 Integration of a Function Containing a Constant

If we integrate a function containing a constant factor, this factor must also be a factor of final integral.

Introduction

The term nitrogen use efficiency, (NUE) is widely used in research to cover problems in use of N in crop production systems. It describes N input/output ratio at different scales starting from farm levels to regional levels. An analysis of of NUE is helpful to analyze possible options for improving NUE in different crops and cropping systems. NUE at crop scale may be defined as the ratio between the yield and the N uptake by the crop. This ratio is sometimes called as the physiological NUE or utilization efficiency. High NUE can be achieved by high harvest index and a high productivity of dry matter per unit N uptake. The second component of NUE is the ratio of plant N uptake to the potentially available N. This ratio is called uptake efficiency or available N use efficiency. Enhancing the uptake efficiency of the crop is possible through enhancing the physiological uptake efficiency of the roots, enhancing root length density and matching the N supply and demand of a particular crop.

Modeling is heart of hydroinformatics. Simulation modeling became integrated part of modern science to justify feasibility of selected option among various competitive alternatives. Simulation modeling is a tool to evaluate the performance of a system, existing or proposed, under different configurations of interest and over long periods of real time. This chapter describes basic concepts, model simulation, model variables, modeling process, model performance etc. in brief.