eChapters

Physical properties of a soil greatly influence plant growth. The plant support, root penetration, drainage, aeration, retention of moisture and availability of plant nutrients are all linked with the physical condition ofthe soil. The physical properties of a soil which depend on the amount, size, shape, arrangement and mineral composition of its particles, also influence its chemical and biological behaviour.

In modern times, soil tillage has emerged as an integral part of a crop system. Soil tillage or soil surface management has been found important in alleviating soil related constraints encountered in crop production. An important effect of soil tillage on crop productivity is through its influence on soil processes, soil Soil Tillage 39 properties and crop growth. At the same time, soil tillage has its impact on the environment e.g. soil degradation, water quality, emission of green house gases from soil related processes etc.

The plants draw water from the soil for growth and development. The soil acts a reservoir for soil moisture (Fig.5.1). The basic aim of a soil water balance model is to quantify the manner in which the water supplied to the soil either through precipitation and irrigation is disposed off. In the process, the soil water balance models were found to be extremely useful to determine the amount of water utilized by the crop for evapotranspiration.
The concept of water balance was originally developed by Thornthwaite, an American geographer and it formed the basis for development of more scientifi c advances due to its wide range of applicability including
• Choice of crops/ cropping systems based on water availability
• Irrigation scheduling
• Optimisation of limited water resources for higher productivity
• Characterization of droughts and agricultural droughts
• Assessment of crop yield and pre harvest forecasting of crop yields
• Designing irrigation projects
• Development of water storage structures
There are quite a large number of water balance models available in literature nowadays. Several of these models may be applicable for regions where there are developed. There were considerable efforts to develop water balance models can be used by the crop on daily basis in case of different crops as well. The choice of a water balance model to a large extent depends on the availability of data required for running the model. It may not be possible to cover all models available in

The movement of water through soil is fundamental to irrigation efficiency, drainage, nutrient transport and plant water availability. This chapter examines the principles governing water movement in both saturated and unsaturated soil conditions. It introduces the movement of water through the soil profile and discusses saturated hydraulic conductivity as an important parameter describing the ability of soil to transmit water. Water flow under unsaturated conditions is considered in greater detail, including the relationship between soil-water content and hydraulic conductivity. The chapter presents the equation for unsaturated flow and describes experimental approaches for studying water movement. Unsaturated hydraulic conductivity, represented as K(θ), provides an important basis for understanding the changing ability of soil to transmit water as soil moisture conditions vary. The chapter also considers prediction of soil-water flux, linking theoretical concepts with practical irrigation and soil-water management. Understanding water movement helps in determining irrigation requirements, reducing water losses, improving drainage and maintaining favourable soil-water conditions for crop growth.

Water can move in the liquid and gaseous phases:

1. Liquid water

i) Saturated flow: Most pores are filled with water; water in this condition is tension free

ii) Unsaturated flow: Pores are partially filled with air; the water is under tension.

2. Water vapour

i) Diffusion: Water vapour moves by diffusion as a result of vapour pressure differences (partial pressure)

ii) Mass flow: Water vapour flows in a mass with other gases of the system in response to differences in total pressure.

Plant Relationship with Soil in Climate Change

1. Gravimetric Moisture

Significance of Gravimetric Analysis

Gravimetric moisture analysis, being the foundation of soil water assessment, allows for a meticulous examination of the water content in the soil. The process involves obtaining a representative soil sample, subjecting it to controlled drying conditions, and determining the weight loss after moisture removal. This method not only quantifies the total water content but also helps in understanding the soil’s water-holding capacity and drainage characteristics. Gravimetric analysis is indispensable in precision agriculture, aiding farmers in optimizing irrigation schedules and preventing overwatering or underhydration.

The phenomena related to the retention and movement of water in soils, its uptake and translocation in plants and its loss to the atmosphere are all energy related. The more strongly water is held in the soil, the greater is its energy. It means that if water is to be removed from a moist soil, work has to be done against the adsorptive forces. The water movement is always from a zone where the free energy of water is high (standing water table) to one where the free energy is low (a dry soil). This is called soil water energy concept.

17.1. Soil Water Potential

The free energy of soil solids for water is influenced by:

i) Matric force: the attraction of the soil solids for water (adsorption) which markedly reduces the free energy (movement) of the adsorbed water molecules.

Water is the elixir of life. It is required for the evapo-transpiration of growing plants. Water acts as a solvent and, together with dissolved nutrients, makes up soil solution from which plant roots derive nutrients. Soil water content controls soil air and soil temperature.

16.1. Forces of Water Retention

The forces responsible for water retention in soils are adhesion and cohesion. Adhesion refers to the attraction of solid surfaces for water. Cohesion refers to the attraction of water molecules for each other.

The force with which the soil particles retain water is defined in terms of pF scale (Schofield, 1935). pF is defined as “the logarithm to the base 10 of the numerical value of the negative pressure of soil moisture expressed in centimetres of water.”

Water is absolute necessary constituents for the survival and growth of all the living substances on earth. It is the most essential ingredients for many of the physiological and metabolic process in plants, like photosynthesis to form sugars, translocation of cell constituents and maintenance of cell turgidity. Soil, being an adsorbent of water received from precipitation or rainfall acts as reservoir to meet requirement by plant during growing season. Water retained in the soil serves as solvent to dissolve salts and nutrients and as a carrier to translocate them for absorption by plants. It plays significant role in weathering reaction, soil forming processes and profile development. Water is also important for growth and activities of microorganisms influencing decomposition of organic matter, transformation of mineral nutrients and other physical, chemical and biological properties in soil. This chapter deals with the retention and movement of water in soils to obtain better understanding of soil-water-plant-atmosphere relationships.

The soil consists of many solid particles of different sizes and is capable of absorbing and retaining water in the soil within certain limits when water is received through either from precipitation or by irrigation. The water that is held in the soil is called soil water (Fig.4.1). It can exist also in the form of water vapour as well. The crop production depends upon the soil water. All the water that is present in the soil may not be available for plants.
The water availability to the plants from the soil depends upon some physical properties of the soil as well as on the physical processes that govern the existence of water in the soil. Therefore, it is necessary to understand about the relationships that govern the water availability in the soil as explained in the following text-
4.1. Energy Concept of Soil Water
Soil water energy concept is all about potential energy, gravitational potential, osmatic potential, pressure potential energies.
4.1.1. Soil Water Energy: The total energy state of soil water is defined by its
equivalent potential energy as determined by various forces acting on the water per unit quantity. Different energies are involved including kinetic and potential energy.

The soil–plant relationship is central to crop productivity because soil conditions directly influence root development, water uptake, nutrient availability and plant growth. This chapter focuses particularly on the problems associated with salt-affected soils, including saline, sodic and acid soils. It explains the formation, distribution and characteristics of saline soils and describes the production constraints created by salinity stress. The effects of salinity on plant growth, evaluation of saline soils, reclamation and leaching are discussed together with leaching requirements and crop salt tolerance. Water and nutrient management strategies for saline soils, including the use of biofertilizers, are considered. Sodic soils are examined through their formation, characteristics, exchangeable sodium percentage (ESP) and sodium adsorption ratio (SAR), followed by reclamation practices and amendment use, particularly gypsum. The chapter also addresses acid soils, their formation, chemical characteristics, nutrient availability, plant-growth constraints and amelioration through liming. Calcareous soils and their management are also included, providing a comprehensive treatment of problematic soils affecting soil–plant interactions

The soil-plant-water relationship is a critical aspect of agricultural science, encompassing the interactions between soil properties, plant health, and water dynamics. This article examines the intricate connections that influence plant growth and crop productivity, highlighting the roles of soil texture, structure, and organic matter in water retention and availability. It explores how plants uptake water through root systems and how transpiration affects water distribution within the soil. The study also addresses the impact of irrigation practices and soil management techniques on optimizing water use efficiency in agricultural systems. Understanding these relationships is essential for developing sustainable farming practices that enhance crop yield while conserving water resources.

The soil–plant–water relationship integrates the major concepts of soil-water availability, root water uptake and plant transpiration into a unified system. Water movement through the soil and plant is governed by differences in water potential and by resistance within the water-conducting pathway. This chapter examines water uptake by roots and the process of transpiration, emphasizing the continuous movement of water from soil through the plant and ultimately to the atmosphere. Variations in water potential and water flux within the soil–plant system provide the basis for understanding how water is transported under different environmental and soil conditions. The resistance of the water-conducting system is considered as an important factor controlling water movement. The chapter separately discusses water movement through soil and within plants before connecting these processes with water movement from the leaf surface to the atmosphere. Control of transpiration is also examined, linking plant water relations with environmental conditions and crop water use. The chapter provides an integrated framework for understanding soil–plant–water interactions essential for efficient irrigation, crop productivity and sustainable management of water resources.

14.1. Introduction

Environmental pollution primarily deals with five types of pollution: soil pollution, water pollution, air pollution, sound pollution and light pollution. However, soil, water and air pollutions are considered very important as the pollutants from the environmental compartments may be cycled within themselves, enter the food web and interfere the biological processes adversely of any living species. Soil supplies nutrients and water to plants which, in turn, act as the nutrient supplier to animals and humans. Thus, maintenance of soil quality is considered prerequisite for growth of plants, animals and humans. If soil, water and air are polluted through various mechanisms, living components in the environment are suffered adversely. Soil, water and air pollutions are associated with the build-up of soil contaminants such as toxic organic and inorganic compounds, petroleum hydrocarbons, radioactive materials, salts, disease causing agents etc. above the permissible limit, so that their presence will cast adverse effects on physicochemical and biological properties of soil which in turn exert negative impact on crop growth and on any non-targeted organisms. Common soil contaminants include heavy metals, pesticides, petroleum hydrocarbons, fertilizers if used in excessive amount, and many others. Contamination of the soil, air and water results from intensification of farming activities. Primarily nutrients (particularly nitrogen and phosphorus), sediment, wastes, pesticides and salts are regarded as agricultural nonpoint source pollutant. Realistically, most of the pollutants originate from anthropogenic activities, although there exists many naturally occurring mineral components that may exhibit toxicity towards living system at higher concentration. Land disposal of municipal and industrial wastes, automobile emissions, mining activity, and application of fertilizers and pesticides to agricultural field cause a continuous accumulation of heavy metals and other pollutant components in soils. These pose threats of environmental degradation via soil erosion, loss of biodiversity, climate change etc.

Soil and growing media provide the physical, chemical, and biological foundation for successful horticultural production. This chapter explains soil properties, soil fertility, soil health, growing media, nutrient availability, and principles of plant nutrition. Emphasis is placed on soil testing, pH, electrical conductivity, organic matter, nutrient balance, and crop-specific fertilizer management. The chapter also introduces soilless media used in nurseries and protected cultivation. Understanding root-zone conditions is essential because horticultural crops are highly sensitive to water, aeration, salinity, and nutrient imbalance. Sustainable approaches such as composting, mulching, biofertilizers, and integrated nutrient management are discussed to maintain productivity while improving soil health and resource-use efficiency.

The word soil is derived from the Latin word ‘Solum’ means soil. In general the top 15-20 cm cultivated layer is referred as soil. It is a loose and unconsolidated outer layer of the earth crust that is crumbly and powdery in nature. Soil below the plough layer is called subsoil.

Soil is formed by weathering of rocks. Weathering may be physical or chemical or both. Factors of soil formation are parent material, climate, living things-plants, animals and microorganisms, topography and time. Soil formation is a function of parent material (P), climate (C), topography (T_o), life (L) and time (T) which is represented by f(P C To L T).

Soil  and its Components
Soil
Soil is a three dimensional, transferable natural material which is found on the earth crust and provides natural medium to plant growth. OR
Soil is the upper most loose layer of the earth, suitable for plant growth. 
Different scientists defined ‘SOIL’ in different ways:
Buckman and  Brady defined soil as  “A dynamic natural body on the surface of the earth in which plants grow, composed of mineral and organic materials and living forms”.

Introduction Soil, often referred to as the “skin of the earth,” is a critical component of our planet’s ecosystem, serving as the foundation for all terrestrial life. This chapter explores the science of soil, delving into its formation, classification, and the complex properties that define its role in agriculture and environmental sustainability. Understanding soil is fundamental to addressing global challenges such as food security, climate change, and sustainable land management. The chapter begins with an examination of soil formation and classification, providing insights into the diverse types of soils that exist across different landscapes. It then discusses the physical and chemical properties of soil, including their impact on soil health and fertility. The role of soil microbiology is highlighted, emphasizing the importance of microorganisms in maintaining soil health and promoting plant growth. As we progress through the chapter, we explore modern concepts in soil science, including sustainable soil management practices and their significance in mitigating the effects of global warming. The chapter also addresses the crucial role of soil in food security, demonstrating how effective soil management can enhance agricultural productivity and resilience in the face of climate change. Finally, the chapter touches upon the threats to soil health and the importance of sustainable soil management in ensuring a prosperous future for all. Soil science is a vital discipline within agriculture that focuses on the study of soils and their properties. This chapter delves into various aspects of soil science, including soil formation and classification, soil physical and chemical properties, soil fertility and nutrient cycling, soil conservation and erosion control, and soil microbiology and soil health. Soil is the foundation of agriculture, providing the medium for plant growth and supporting the intricate web of life that sustains our ecosystems. Understanding the science of soil is essential for optimizing crop production, protecting natural resources, and ensuring sustainable land management practices. In this chapter, we will explore the fascinating world of soil science, delving into its various aspects to gain insights into soil formation, composition, fertility, and conservation. By understanding the principles and processes underlying soil science, we can make informed decisions to enhance soil health, maximize nutrient availability, mitigate erosion, and promote sustainable agricultural practices.

Water is one of the most important resources governing crop production in irrigated agriculture, and its behaviour within soil determines the availability of water to plants. This chapter presents the fundamental relationship between soil and water, beginning with the importance of soil water in crop production and the classification of soil water. Soil moisture constants and methods for measuring soil moisture content are discussed to explain the different forms and availability of water in the soil profile. The chapter introduces the potential concept of soil water and the components contributing to total soil water potential, including potential energy. Available water capacity is examined in relation to plant water supply, while capillarity and water retention explain how soil texture and pore characteristics influence water storage. The soil-water characteristic curve provides a basis for understanding changes in water content with soil-water potential. Soil-water hysteresis is also discussed to explain differences in wetting and drying behaviour. These concepts provide an essential foundation for efficient irrigation, crop water management and sustainable use of soil water resources

1.1 THE IMPORTANCE OF SOILS

Soils are the medium in which crops grow, and so they are essential to the provision of the food and fibre to sustain mankind. But besides the immense importance of this role they are an essential component to life as we know it because of their action as a buffer to control the flow of water between sky, land and sea. They are also a sink, and usually a safe sink, for many of the chemicals that might otherwise make life difficult or unpleasant.

As with other natural resources, it is important that soils are used conservatively, so that the advantages we enjoy from them now can continue to be enjoyed in the future. To do this we need to understand them, to understand the flow of nutrients from soil to plants, and back to the soil or the sea in food chains and water flow. We need to understand the processes by which rocks alter to form soils, and how fast or how slowly the process occurs in different conditions. We need to understand the decay of plant materials in the soil, and how the products of decay help to make the soil a better place for plants to grow.

The chemistry of the constituents of soils, and of the processes by which changes occur, is not simple. Nevertheless we have learnt much about it, and can apply that knowledge to ensure that soils continue their important functions, and are not exploited so that they become infertile, nor used in such a way that the fertile topsoil is lost by erosion by wind or water.