eChapters

Thisprocedure estimates aggregatestabilitytoimpact ofraindropsand water erosion. Wet sieving procedure was originally proposed by Yoder, 1936. Later, the procedure was modified byKemper and Rosenau, 1986.

Equipment

1. Yoder type sieve shaking electrically operated machine (3/4 inch stroke at 30 strokes per minute)
2. Concentric sieves of various sizes of pores to fit properly into the machine.
3. Weighing balance

After the agricultural activities a number of by-products are obtained and these are known as agricultural waste. These include residues of different crops like stalks, straws, leaves, roots, husks and shells. The animal waste is in the form of manure. All these agricultural wastes are free of cost however; they can be utilized as an important resource (Lionel and Arnold, 1931). Agrawal (1998) has mentioned India as the final dumpyard. The wastes obtained from various resources can be converted into heat, steam, charcoal, methanol, ethanol, biofuel, compost, energy, biogas, construction and high valued chemical compounds. Many times these agri-industrial wastes are not completely utilized and either they rot in open areas or are burned in the fields.

Cereals are cultivated grasses grown for their edible starchy grains. Larger grains used as staple food – Rice, wheat, maize, barley, oats etc.

The pros and cons of wheat imports are now a matter of public, political and media concern and debate. I have been quoted as both favouring imports and opposing it. Since this issue is a complex one with short- and long-term implications, I would like to explain my personal position.

The wheat import plan announced by the Government of India is in response to the need for maintaining adequate food stocks both for the purpose of food security and for feeding the public distribution system (PDS). Following the Wheat Revolution in 1968, Indira Gandhi decided to build a sufficient buffer stock of foodgrains under government control in order to ensure that the basic staples are available at reasonable prices even under conditions of unfavourable monsoon. She was also deeply conscious of the linkage between food security and sovereignty in foreign policy. Maintaining adequate food reserves is an absolute must from the point of view of avoiding both panic purchase and famines, particularly at times when there are indications of aberrant monsoon behaviour. Some years ago the Government of India had over 60 million tonnes of foodgrain reserves and substantial quantities were exported to reduce the cost of maintaining stocks of that order.

Curriculum reorientation is necessary, when any one in use is no longer responsive to the needs, interests and unable to meet the demands of the farming community to which it is intended to serve. In any case a number of factors, such as those listed below, must be taken into consideration while reorientation:

There should be an analytical assessment of the existing agricultural extension curriculum in order to justify any proposed reorientation.

Learning needs of the farm university graduates and farmers should be reviewed from the point of view of both individual learner requirements and national development needs.

Abstract

The present study discusses the cropping pattern changes in Andhra Pradesh agriculture will leads to crop diversification and crop concentration using with Geographical Information System (GIS). Crop data were compiled for the triennium ending period 1980-81, 1990-91, 2000-01 and 2004-05 from various statistical abstracts of Andhra Pradesh. For measuring the crop diversification indices, we have used the Herfindahle index and for crop specialization is measured by using the Location quotient method. The level of crop diversification in the some districts of the state in the eighties is very high. However with the advent of green revolution, there had been a moderate crop unification or crop concentration in the eighties. This trend of crop unification is found to be reversed after 1990-91, though the magnitude of the change is not very striking. The crop diversification is observed to differ across the districts. The level of crop diversification is high in the agricultural backward regions of Rayalaseema and Telangana districts and low in the agriculturally progressive Coastal Andhra districts. During the period 1990-91 to 2004-05, the major trends in crop concentration are increase in the concentration of rice in the districts where it is popularly grown and decline in the concentration of coarse cereal crops, pulses and oilseeds. The concentration of spice crops and fruits and vegetables are also on an increasing trend, which they are popularly grown in their respective districts.

Keywords : Cropping Pattern, Diversification, Location Quotient, Andhra Pradesh, GIS

The world population is expected to reach 9 billion by 2050. This population growth of 2 to 3 billion people over the next 30 years, combined with the changing diets, would result in a predicted increase in food demand of around 70% by 2050 (UNDESA 2009).

The extensive integration of drone technology in agriculture is swiftly revolutionizing farming practices, providing substantial enhancements in efficiency, precision, and sustainability. Drones provide farmers a cost-efficient and effective method for crop monitoring, resource management, and yield optimization. Drones facilitate high-resolution imagery acquisition, real-time crop health monitoring, and precise application of fertilizers or pesticides, empowering farmers to make data-driven decisions that improve productivity. As technology becomes increasingly accessible, particularly in developing regions, its usage is steadily rising. Agriculturalists are progressively recognizing the capacity of drones to decrease labor expenses, mitigate resource wastage, and improve environmental sustainability, establishing them as a crucial instrument in the future of agriculture.
CHALLENGES AND OPPORTUNITIES FOR THE WIDESPREAD ADOPTION OF DRONE TECHNOLOGY IN AGRICULTURE
The extensive integration of drone technology in agriculture offers both obstacles and prospects. Comprehending these factors can influence the future of agriculture and realize its complete potential. Drone technology is being integrated into Indian agriculture; yet, obstacles to wider implementation persist. Challenges
• Significant Initial Expense: The initial capital required for acquiring drones, along with essential sensors and software, can be excessive, particularly for small-scale agricultural producers. The expenses associated with training and upkeep exacerbate the financial strain, hindering certain farmers from embracing the technology.
• Technical Skills and Training: Proficient operation of drones necessitates a specific degree of technical acumen. Agriculturalists must acquire the skills

Any living organism in its natural habitat is called a wildlife. It may be plant animal or a microbe. The significance of wild life lies in setting up the balance of population in nature by maintaining food chains and food webs. It acts as the gene banks in relation to breeding of plants and animals for introduction of desirable characters such as high yield of economic product and resistance to diseases. The scientists are performing studies to screen and select useful genes in economically important organisms.

This chapter introduces the principles of wildlife ecology and the importance of biodiversity conservation within natural ecosystems. It examines wildlife communities, biodiversity, major threats to wildlife, and strategies for conservation and habitat protection. The chapter also explores the role of technology in wildlife conservation, ecological restoration, and wildlife conservation practices in India. Emerging challenges and future opportunities are considered to provide a broader understanding of maintaining wildlife populations and ecosystem integrity. The chapter emphasizes the importance of scientific management, habitat conservation, restoration, and technological support for long-term wildlife conservation.

A big layer of air called the atmosphere surrounds the earth. The air within this layer moves from place to place when it warms up or cools down. This moving air is known as wind. In other words, air in motion is called wind. Winds move moisture and heat around the world and also produce much of our weather.

The strength of the wind can vary enormously. Sometimes air moves slowly and the wind is barely noticeable. When the weather is clear there may be a gentle breeze. When the wind is still very light, but it can be felt and there may be rustlings by leaves. At other times, the air can move very quickly and become a gale or hurricane, blowing down trees and damaging electric poles and buildings.

Winds are part of a global air circulation system that acts to balance temperature and pressure around the world. Different parts of the world receive different amounts of heat from the sun. This differential heating in turn results in differences in temperature and air pressure around the world, which drives the world’s winds.

As equatorial areas are heated most, the air above them warms and rises as it becomes lighter than the surrounding air, causing an area of low pressure. In cooler areas, the air sinks because it is heavier and results in an area of high pressure. Winds will blow as air is squashed out by the sinking cold air and drawn in under the rising warm air. Any difference in temperature like this will always cause a difference in air pressure, and therefore winds will blow. These movements result in a global wind pattern, with air moving between different areas around the world and also at different heights in the atmosphere. Colder air from the poles tends to sink and move towards the equator closer to the surface of the earth. In contrast, warm air from the equator rises and moves towards the poles high in the atmosphere because it is lighter.

Air in motion is called wind. Winds move moisture and heat around the world and also produce much of our weather. Winds are part of a global air circulation system that acts to balance temperature and pressure around the world. Any difference in temperature will always cause a difference in air pressure, and therefore, winds will blow. There are two types of movement in the atmosphere, horizontal movement and vertical movement. The term wind generally refers to the horizontal movement of air relative to the earth’s surface. Vertically moving air columns are called as currents. Upward and downward air currents are referred to as updrafts and downdrafts, respectively. Vertical motion in the atmosphere is of significance for the formation of clouds, precipitation and various types of storms. The horizontal differences in air pressure are far more variable than vertical changes and give rise to a wide range of air motions. Uneven distribution of pressure over the globe is balanced through the movement of winds. Winds also act as a means of transporting heat, moisture and other properties from one part of the earth to another.

10.1 Introduction

Winds are the motion of air around the Earth. This movement in air is caused by the uneven heating of the planet’s surface by the sun. The idea of using wind as a form of power is not new. The traditional applications of wind were primarily as sources of kinetic energy for rural, agricultural and a limited number of industrial uses such as pumping water and grinding grain.

Presently wind energy can be used for two major applications, such as wind mills for pumping water for drinking as well as for irrigation purposes and second application is as aero-generator for electricity generation for domestic and industrial uses. In addition to this, presently wind energy battery charger are also available, which can store energy for lights, radio communication, hospital equipment and to power various emergencyrelated equipment.

The wind energy has an enormous resource, but the problems of utilizing the winds are many and varied. Wind energy is very diffuse in nature and local topographical features significantly alter the prevailing winds, thus leading to the extremely site specific nature of wind energy.

Scientists have estimated that as much as 10% of the world’s electricity could be prepared by wind generators by the middle of 21 century. India has estimated wind power potential of 40,000 MW. India now, ranks fourth in the world in wind power generation.

The world’s largest wind farms are in California (USA), where wind turbines can generate power up to about 1120 MW. The first wind mill used as source of electric power was built in Denmark in 1890.

4.1 Introduction

The wind is caused by the motion of air. In different regions, there are pressure differences that cause winds. There is a tremendous amount of energy carried by them. The use of wind energy can be profitable in regions with strong winds for a significant part of the year. The wind is a form of solar energy. The wind is caused by uneven heating of air and land by the sun. The earth’s rotation and geological irregularities also play a role. Heating causes air to rise, and cooling causes cooler air to fall to fill the space. As a result, the air mass moves. On a global basis, the poles exert a primary forcing function that allows the equator to receive surface winds from the poles. 

If the earth’s surface is perfectly smooth, the wind flows parallel to the earth’s surface without any friction and the wind velocity will be uniform at different heights above the earth’s surface. As the earth’s surface is not smooth, it offers friction, slows down the movement of the wind near the surface. Therefore, the wind velocity increases very slowly with increase in height up to a certain level, and there after the wind velocity increases with increase in height more rapidly (Fig.5.1). When the wind speeds are measured at different heights above the ground and plotted on a graph with height Z in logarithmic scale on y-axis and wind velocity on x-axis, the wind velocity will be zero at certain height above the ground and thereafter the wind velocity uniformly increases with increase in height. The height at which the mean wind velocity is zero due to roughness is called roughness parameter (d). Therefore, the roughness parameter is defined as the height at which mean wind velocity is zero due to roughness of the earth’s surface. In a cropped soil, the crop also obstructs free movement of air. If wind profile measurements are taken in a cropped soil and are plotted on a graph with height on y-axis in logarithmic scale and mean wind velocity on the x-axis, the mean wind velocity will be zero at a height above the roughness parameter. The difference in height (Z-d) at which the wind velocity is zero when the height is plotted on logarithmic scale is called zero plane displacement (Z0). Therefore, the zero plane displacement can be defined as the height by which the roughness parameter increases due to presence of the crop (Fig.5.2).

Air Constantly moves from place to place due to pressure differences which are caused by difference in temperature.

Wind has been defined as air in horizontal motion. According to Byers, “The wind is simply air in motion, usually measured only in its horizontal component”. According to Trewaitha, “Wind is simply air moving in a direction which is essentially parallel with the Earth’s surface.

There are two types of movement of wind in the atmosphere.

1. Horizontal movement

2. Vertical movement (Currents)

The primary wind circulation in Northern and Southern hemispheres is seen in figure on page 51.

Introduction

Increasing use and rise in the cost of chemical fertilizers, pollution due to their application and decline in soil fertility and micro flora are worrying facts to the farming community. Increased awareness about organic produce among the consumers is another reason to find out an alternative to chemical fertilizers. Vermicompost production on farm and its use in crop production is one way of mitigating these problems. Among the different methods, Windrow method of vermicomposting is the production of compost by piling organic matter or biodegradable waste, such as animal manure and crop residues as long rows (Windrows) on the surface of soil under the shade of trees without any permanent structures and later releasing required quantity of earthworms in wet beds. This vermibed technology is simple and cost effective and sustainable to adopt.

The prototypes have been exhibited in the premises of Dairy unit, University of Agricultural Sciences, Dharwad since long and many farmers seeing these were of the opinion that technology was simple and easy to adopt using the farm generated biomaterial waste with no additional cost. During 2020-21, when farmers of remote villages Dharwad district were interacted, it was noticed that still the technology was not followed by the farmers.Therefore, a team of Green Foundation based in Dharwad made an attempt to reach the farmers of remote villages of Dharwad district to make aware of this technology. After interactions with different categories of farmers, a modest attempt has been made to identify small and large farmers of remote villages viz. Basavarsikoppa and Holtikoti of Dharwad district during 2021-22 to sensitize and demonstrate windrow method of vermicompost production. The results, experiences of the farmers and finally the impact of the technology are discussed here in this presentation.

World Intellectual Property Organization

http://www.wipo.int,http://www.wipo.org

The World Intellectual Property Organization - referred to in abbreviated form as WIPO in English, and OMPI in French and Spanish - was established by a convention signed at Stockholm on July 14, 1967, and entitled “Convention Establishing the World Intellectual Property Organization.” The WIPO Convention entered into force in 1970. WIPO became a specialized agency in the United Nations system of organizations in 1974 and dedicated to the use of intellectual property (patents, copyright, trademarks, designs, etc.) as a means of stimulating innovation and creativity.

WIPO promote the development and use of the international IP system through Services, Law, Infrastructure and Development.

12.1 Introduction

“Precision farming,” also known as site-specific management, describes a bundle of new information technologies applied to the management of large-scale, commercial agriculture. Precision farming technologies include, for example: personal computers, satellite-positioning systems, geographic information systems, automated machine guidance, remote sensing devices and telecommunications. If they function as designed, ubiquitous wireless sensors will become an essential tool for bringing this vision of precision farming to maturity.