eChapters

Abstract

Women Technology Park is a technology modulation and a training centre to show case livelihood technologies for women. The aim of Women Technology Park is to create awareness among rural farming community and give trainings of proven technology to reap maximum benefits from their existing resources. Its objective is to make them aware about “processing” that can enhance their income in multiple times. In this direction, the first ever Women Technology Park (WTP) of Jammu and Kashmir was sponsored by SEED division of Department of Science and Technology, Government of India and endorsed by Livestock Products Division FVSc, SKUAST-Jammu. It was inaugurated by Vice chancellor of SKUAST- Jammu at Deoli Village of Bishnah Block, Jammu and Kashmir. 12 groups of women were screened out and trainings were imparted to them for a week. More than 75 training cum awareness programs have been organized with more than 1500 beneficiaries. There are more than 50 beneficiaries who received start up grant in the form of goods essential for preparing livestock products and started up their own micro-enterprises and became self-reliant and set an example for other women to come up and take up processing of livestock products as profession to earn their livelihood.

INTRODUCTION

Women constitute half of the humanity, contributing to two-thirds of world’s work hours. She earns only one-third of the total income and owns less than one-tenth of the world’s resources. This shows that the economic status of women is in a pathetic condition and this is more so in a country like India. Rural women in India share abundant responsibility and perform a wide spectrum of duties in running the family, maintaining the house, involving in activities like rearing, feeding livestock, attending to farm labour, and the likes. Still they suffer economically and are socially invisible. Training of rural women is important so as to increase their involvement in developmental process, enhance their skill and make them equal partners in national development.

Introduction

Entrepreneurship is considered one of the most significant variables influencing the economic development of society and the growth of every country. In addition to human resources, effective resource management is also essential for a nation’s success. Entrepreneurship involves the act of creating something as an entrepreneur. Entrepreneurs are thought to play a key function in initiating and maintaining socioeconomic development. As women cover up approximately half of the population their societal status significantly significantly impact the country’s development.

Abstract

Sericulture, an agro-based industry contributes significantly to Indian economy.  Silk cocoons are reeled on charaka, cottage and multiend reeling machines. Of these more than 50% of raw silk comes from charaka sector. Charaka silk reeling units decreased from 23971 to 16263 (1998-2003) in Karnataka. These charakas are mostly operated at grass root level with labour coming from small, marginal and land less villagers. A study was conducted in 15 charaka reeling units in two taluks each of Bangalore rural, Mysore, Kolar and Chamarajanagar districts. Respondents were grouped into small (1-4 charakas), medium (5-8) and large charaka reelers (>8). Primary data was collected with pre-tested schedules.

This chapter introduces the scientific principles underlying the structure, properties, processing, preservation, and utilization of wood. It examines the anatomical organization and chemical composition of wood and explains relationships between structure and important physical and mechanical properties. The chapter also discusses moisture interaction, dimensional behaviour, mechanical performance, durability, seasoning, preservation, and wood-processing technologies. Engineered wood products and modern approaches to wood utilization are considered as important components of forest-product development. Together, these topics provide an understanding of wood as an important renewable material and its efficient, durable, and sustainable utilization.

Introduction
Work study is a quantification method employed for examining a man’s job in an institution. It encompasses two techniques- they are method study and work measurement. With expansion in size along with complexity of organizations it is becoming very difficult to manage the affairs of a company. There is no quantification technique to compute the efficacy of the human work force. A manager can construct good plans about the requirement of goods and services only when he can predict the amount and type of human work force is essential. It is a very common execution from ages in the organizations but these are not providing the satisfactory results. So in order to attain the predicted results efficiently along with standards, organizations started employing work measurement techniques. Fig. 3.1: Work measurement
Meaning
Work measurement denotes quantity of time required for accomplishing a job without comprising in quality the minimum time needed for executing a task is termed as standard or allowed time. So work measurement aids individuals or corporations to enhance their achievement effectively by good plan and execution. It is very essential to employ these techniques because time is a scarce resource. Work study is investigating the human work with respect to physical, physiological, psychological and economical aspects. It investigates the factors affecting the work and workers efficacy and economy to provide necessary suggestions.

Introduction 
Ergonomics is the science of adapting workplace conditions and job requirements to match the capabilities of the workforce. Its primary aim is to enhance comfort, improve health, and boost productivity in the work environment. To achieve these goals, ergonomics examines the interaction between workers and their tools, equipment, and furniture, ensuring they are aligned with the tasks being performed. It involves applying scientific knowledge about human behavior and physical needs to design objects, systems, and environments that promote efficiency and safety. Ergonomics is relevant to all activities involving people, including work systems, recreational pursuits, and health and safety measures. By focusing on the relationship between individuals and their work environments, ergonomics plays a crucial role in safeguarding both physical health and workplace safety. The foundation of good ergonomic practices lies in adapting tasks to suit the individual rather than forcing the individual to conform to the job. An ergonomically designed workplace incorporates tools and processes that accommodate workers’ physical abilities and limitations, reducing the risk of injuries and discomfort. The importance of ergonomics has grown as it highlights the connection between certain job activities and the risk of injury. The human body is not designed to remain in awkward or unnatural positions for extended periods without experiencing strain. Ergonomics helps identify harmful postures and movements and provides strategies to prevent associated pain and injuries. In office environments, ergonomic practices are essential for enhancing productivity. A well-designed ergonomic workplace can improve efficiency, boost employee morale, and contribute to overall worker well-being. The various environmental factors affect working people in one or the other way, it may be health, performance and comfort. However they are not independent because, although these aspects are considered independently but their effect likely to be combined. Although human beings are extremely adoptable but still they get affected of the ideal range of tolerance to environmental factors for comfort or for performance is very narrow. Although physiological effects of environmental

Windows is an operating system with a Graphical User Interface (GUI). GUI displays graphical objects called icons, which represents the items you use. Also it is a menu driven interface, where you have menus and submenus to perform even the most basic tasks such as File open, Copy, and Help etc. The user need not know the computer commands, he just need to know simple English language to operate windows. This feature of windows made it a widely accepted operating system. Also windows allow multiprocessing environment, where we can perform more than one task simultaneously. For example, if you need to take a print out of a very long report which may take a couple of hours, you may give the command, and leave it at the background, and then you can keep working on the other applications. Windows supports a very useful pointing device called a mouse. With the mouse you can go anywhere on the screen and click where ever you want and pass instructions.

Abstract

The two most important tasks for a patentee to undertake after being granted a patent, in any patent regime, would be to pay the renewal fees necessary to keep the patent alive, and provide proof of having worked the patent in the jurisdiction. This article seeks to highlight features of India’s legal requirements with regard to the working of patents on a commercial scale. The number of patents granted in a country is an indicator of the technological strength of the country. However, it should be noted that actual technological growth depends upon the working of patents. Working of a patent means the commercial exploitation of the invention that is embodied in the patent.

INTRODUCTION
A thermostat is a control valve in the cooling system that regulates water flow based on a temperature signal. It plays a vital role in maintaining the engine’s optimal operating temperature. Positioned within the engine’s cooling system, typically between the engine and the radiator, the thermostat is specifically engineered to determine the precise timing for opening and closing the valve. By doing so, it ensures that internal combustion engines consistently operate within the desired temperature range, promoting efficiency and preventing overheating or overcooling.

4.1 Introduction
Workplace design focuses on the structure, dimensions, and layout (placement and orientation) of various elements that surround one or more workers. These elements may include seating (e.g., working chairs), work surfaces, desks, equipment, tools, controls, displays, passages, windows, heating and cooling systems, and more.
The goal of ergonomic workplace design is to enhance work performance in terms of both quality and quantity by achieving the following objectives:
• Reducing physical strain and workload on workers.
• Simplifying task execution by ensuring efficient information exchange with the surroundings and minimizing physical constraints.
• Promoting occupational health and safety.
• Ensuring the ease of use of workplace elements.
Designing an ergonomically sound workplace is a complex process requiring consideration of numerous interacting and variable components. It involves addressing multiple requirements, some of which may conflict. Workplace design must account for the relationship between its components, the worker, task requirements, environmental conditions, and the natural body movements and postures workers adopt.
4.2 Principles of Workstation and System Design Workstation Design Principles
1. Reduction of Static Muscular Work: The human body is built for movement, which aids in blood circulation, supplying oxygen and nutrients to tissues. Static pressure—whether from external sources (supporting surfaces) or internal sources (muscle tension)—hinders blood flow. Static muscle contraction increases both systolic and diastolic blood pressure, causing the heart to work harder. Workstations should minimize static pressure, as workers often spend extended periods at them. Guidelines for workstation design primarily focus on reducing static loads and promoting dynamic movement.

Objectives
• Understand the stages of the writing process.
• Visualize the flow of writing stages using a graph.
• Apply effective strategies for each stage of writing.
Introduction
The writing process is a structured approach that helps writers create clear and coherent texts. It generally consists of five main stages: prewriting, drafting, revising, editing, and publishing. The stages are interconnected, and writers often cycle back to earlier steps before finalizing their work. The following graph will help visualize how these stages overlap and repeat during the writing process.
Graph of the Writing Process
The graph below represents the cyclical nature of the writing process:

Writing funded project proposals involves crafting detailed documents tailored to specific purposes, such as consulting project proposals or sponsored research projects. For instance, a consulting project proposal emphasizes understanding a client's needs, offering solutions, and outlining services to address those needs effectively. On the other hand, sponsored research proposals focus on academic or scientific exploration, detailing methodologies, expected outcomes, and potential impacts within a scholarly context.

Objectives
• Understand the concepts of precise writing, abstracting, and summarizing.
• Develop skills for condensing complex information effectively.
• Learn the essentials of the style of technical communication.
• Apply these writing techniques in various professional and academic settings.
Writing Skills
Writing skills, particularly in the professional and academic environment, are essential for communicating complex ideas clearly and concisely. Three important forms of condensing information are precise writing, abstracting, and summarizing, each serving a distinct purpose in effective communication. Alongside these, the style of technical communication plays a crucial role in ensuring that the information is communicated in a clear, structured, and efficient manner.
Precise Writing
Precise writing involves shortening a lengthy passage or document by conveying the core message without losing essential meaning. It requires understanding the main ideas, removing unnecessary details, and reconstructing the text in a concise form.

16.1. World Trade Organization (WTO)

Only global international organization dealing with rules of trade between nations.

Location: Geneva, Switzerland

Established: 1 January 1995

Created by: Uruguay Round negotiations (1986-94)

Membership: 164 members representing 98% of world trade

Budget: 197 million Swiss Francs for 2018

Secretariat staff: 625

Head: Roberto Azevêdo (Director-General)

The Agreement on Agriculture, the AoA, was negotiated to cover loopholes in the agriculture sections of the original GATT and was signed in April 1994 at Marrakesh, Morocco. Its first step was to get all countries to replace the various quota and other non-tariff restrictions on agricultural imports with equivalent-level tariffs; then countries would progressively cut those tariffs (by 36% over six years for developed countries, 24% over 10 years for developing countries). Restrictions were also mandated in other areas, such as export subsidies and in the AMS, the “aggregate measure of support”, which measured all the assistance going to a country’s farm sector. However, developing countries already had low levels of agricultural support, while developed countries had very high levels, meaning the field was still tilted in favour of the rich countries.

The WTO’s Agreement on Agriculture which came into effect on 1^st January 1995 brought world agriculture production and trade under multilateral trade rules. It was supposed to herald a new era of trade liberalization in the agriculture sector, as hitherto agriculture had been mainly exempted from the disciplines of GATT.

14.1 Principles of X-ray Diffraction

Any crystalline structure is characterized by a regular and systematic arrangement of atoms (or ions) in a three-dimensional array. Since crystals are composed of regularly spaced atoms or ions, each crystal contains planes of atoms or ions separated by a constant distance which is the characteristic of that crystalline species.

X-rays are essentially electrostatic and electromagnetic fields oscillating in planes perpendicular to each other and to the direction of propagation in periodic cycles. X-rays having wavelengths in the order of 10^-3 to 10¹ nm, are produced within a vacuum x-ray tube by bombardment of a metal anode with high-velocity electrons. High-velocity electrons transfer their energy to the electrons of metal anode causing their elevation to higher energy level (excited state). Excited electrons of metal atom soon come back to the vacant shell and each electron transfer from higher to lower energy state results release of a quantum of energy (x-ray photon) equivalent to the difference in energy between these two levels. The energy and the wavelength of emitted x-ray photons are finite and characteristic of the particular atoms of the metal anode used in x-ray tube. Usually, photons generated due to electron transfer from L-shell to K-shell are used for x-ray diffraction analysis.

Diffraction of x-ray involves scattering of x-rays by planes of atoms of the crystal separated by definite distance and reinforcement of scattered rays in definite direction away from the crystal. Reinforcement of scattered rays is quantitatively related to the distance of atomic planes in a crystal as defined by Bragg’s equation:

Wilhelm Conrad Roentgen, German physicist, born on November 8, 1895 discovered X-rays and was awarded the first ever Nobel Prize in Physics in 1901 in recognition of the extraordinary services he has rendered by the discovery of the remarkable rays subsequently named after him. These short-wave electromagnetic radiations have the wavelengths that are matching with both the atomic sizes and shortest interatomic distances. But, the index of refraction of X-rays is near unity for all materials and hence they could not be focused by a lens in order to observe small objects such as atoms, as it is done by glass lenses in a visible light microscope or by magnetic lenses in an electron microscope. Thus, in general, X-rays cannot be used to image individual atoms directly. As an alternative to this difficulty, Max von Laue in 1912 proved that the periodicity of the crystal lattice allows atoms in a crystal to be observed with exceptionally high resolution and precision by means of X-ray diffraction for the first time by using a single crystal of hydrated copper sulfate (CuSO₄ 5H₂O).

5.1 Seed back up programs

In hybrid breeding program, testing of new hybrid combinations is a continuous process and in most cases, the availability of crossed (hybrid) seed for their annual evaluation of selected hybrids is an important issue. Since, the selection of hybrids for advancement is based on yield data, one year will be required to produce seed for testing in the subsequent season. This means for each cycle of advancement, one valuable season will be consumed in their seed production. To avoid this situation and enhance the testing program at a fast pace, an aggressive hybrid seed production program should be followed. This can be achieved by visually selecting relatively more number of hybrids based on their flowering time, plant vigor, disease resistance, and early pod load about 4-5 weeks before harvesting. During this period, the new seed of the selected hybrids can be produced manually. This operation is facilitated by the perennial nature of pigeonpea plant, which can flower for extended periods of 40-50 days; that allows completion of desired number of pollinations of the target crosses in the same cropping season. One trained person can pollinate about 300 buds in 6-7 hours; and with 20% success, about 150 seeds can be produced. Experience has shown that, with good planning and crop management, this program can be achieved with ease.