eChapters

Introduction

In agriculture, plant diseases have always been a major problem, as they cause crop quality to decrease, resulting in yield. Plant disease has a range of effects from minor symptoms to serious damages in whole crop areas, which lead to high financial costs and significantly impact the agricultural economy, particularly in developing countries dependent on a single crop or on a few crops.

Various approaches have been developed to detect disease in order to avoid significant losses. Causal agents have been precisely defined by methods developed in molecular biology and immunology. However, for many farmers these techniques are inaccessible and require detailed knowledge of the field or substantial time and energy to be used. According to the United Nations Food and Agriculture Organization, most farms in the world are small and family-owned in developed countries. Such families provide food for a significant proportion of the population of the planet. However, hunger and food insecurity are not rare and there is restricted access to markets and services. For the above reasons, a great deal of work has been undertaken in order to establish methods that are sufficiently reliable and available to most farmers. Where Plant disease is an essential factor contributing to a major decline in plant production quality and quantity. Plant disease identification and classification are a significant role in improving plant production and economic development.

Abstract

Climate change is a long-term change in the statistical distribution of weather patterns over periods of time that range from decades to millions of years. It may be a change in the average weather conditions or a change in the distribution of weather events with respect to an average. Climate change may be limited to a specific region, or may occur across the whole Earth.Since, time immemorial human beings have attempted to predict the disease occurrence informally by mere observing the changes in pattern of weather parameters. But the present scenario has been very much altered with the incessant and irrational use of natural resources exposing the atmosphere to the enormous encumbrance. Excessive CO₂ emissions, deforestation and injudicious use of chemicals in agricultural fields have ultimately led to the climate change, which needs an absolute engrossment. Climate change has also invited the emergence and resurgence of many of the pest and diseases posing a grave challenge to manage them. So there is a need for immediate action through Government policies and scientific community to combat the situation. Disease forecasting models may be one of the rescuing options to mitigate the problems of agriculture.

When a plant is unable to perform its functions normally, then it is diseased. The two major causes of disease in crops and trees are pathogens and environmental conditions. There are many kinds of disease pathogens: viruses, bacteria, fungi, nematodes, mycoplasma-like organisms, and parasitic higher plants. Fungal pathogens are the most common type. They cause seed rots, seedling damping-off, root rots, foliage diseases, cankers, vascular wilts, diebacks, galls and tumors, trunk rots, and decay of aging trees. Deterrents to establishment include unfavourable weather and environmental conditions such as Temperature and moisture extremes, high winds and ice may directly injure a tree and predispose the trees to pest attack.
Biodiversity plays multiple roles in development as well as ecological sustainability. It has received increased attention in agricultural ecosystems for the past few years regarding the reduction of plant diseases; however, the knowledge of using biodiversity to manage plant diseases is Still incomplete. For crop diversification, the interaction of genetic diversity per se in host populations with identifiable resistance and other functional traits of component genotypes to mitigate disease epidemics is not well understood, and neither is the best way of structuring mixed populations. The mixing of crop varieties can significantly reduce disease epidemics in the field. To achieve the best disease mitigation, growers should include as many varieties as possible in mixtures or, if only two component mixtures are possible. The many strategies, tactics, and techniques used in disease management can be grouped under very broad principles of action. The differences between these principles are often not clear. The simplest system consists of two principles, prevention (prophylaxis in some early writings) and therapy (treatment or cure). The first principle (prevention) has to do with disease management practices applied before infection-that is, the plant is protected from disease.

Abstract

The disease is an output of the interaction among host, pathogen, and the environment over a period of time. Given that a susceptible host and an aggressive pathogen are available, weather determines the intensity of the disease over time. To capture the dynamics of the interactions among these biophysical variables, efforts have been made in the past to understand the variables per se and their interactions through modeling approaches.  The important weather parameters are temperature; rainfall/dew; leaf wetness period, wind, bright sunshine hours all of which are in turn influenced by soil properties. The important parameters of host that can influence disease development are susceptibility; growth stage and form; structure and density of the plant population and overall health. For pathogen, to cause disease, it should be present in the vicinity, pathogenic, adaptable with reproductive fitness and possess efficiency of survival and dispersal. 

10.1. Sugarcane

10.1.1. Yellow leaf disease

1. Vector: Melanaphis sacchari , Rhopalosiphum maidis

2. Symptoms

7.1. Rice

7.1.1. Blast

Magnaporthe oryzae (formerly Magnaporthe grisea) anamorph: (Pyricularia oryzae)

9.1. Groundnut

9.1.1. Early leaf spot: Cercospora arachidicola

1. Symptoms

8.1. Redgram

8.1.1. Wilt: Fusarium udum

1. Symptoms

Dispersal means the spreading of weeds from one place to another place. Dispersable of weeds generally takes place through seeds and vegetative parts. Dispersal of mature seeds and live vegetative parts of weeds is nature’s way of providing non-competitive sites to new individuals.

    (a)    Dispersal of weeds through seeds: Seeds are protector and propagator of their kind. Weeds seeds remain viable for a long time and their dispersable mainly takes place through natural and human agencies.

Introduction 
As we have journeyed through the preceding chapters, meticulously examining the foundational understanding of crop-weather interactions, the sophisticated development of crop simulation models and decision support systems, the invaluable contributions of indigenous technical knowledge, and the systematic formulation of precise and customized agroadvisories, we now arrive at the decisive stage of this entire endeavor of dissemination of Agromet Advisories. The profound scientific insights and meticulously crafted recommendations, no matter how accurate or relevant, remain inert unless they effectively reach the hands, ears, or screens of the farmers who need them most, in a format they can readily understand and apply. This chapter, therefore, is dedicated to unraveling the complex, yet essential, process of ensuring that crucial agrometeorological information successfully traverses the last mile to translate into tangible impact on agricultural practices and outcomes across diverse landscapes. The challenge of effective dissemination extends far beyond a simple broadcast; it necessitates the establishment of a robust, dynamic, and multichannel communication ecosystem. This ecosystem must be meticulously designed to account for the rich tapestry of socio-economic, technological, and literacy disparities prevalent within farming communities. Historically, traditional methods such as the communal gathering around a radio for a farmer‘s bulletin or face-to-face discussions during village meetings formed the bedrock of knowledge transfer, leveraging established social networks and widely accessible, albeit low-tech, communication tools. However, the relentless march of the digital revolution has fundamentally reshaped this landscape, unveiling an unprecedented potential for expansive reach, enhanced personalization, and rapid delivery of information, thereby opening a myriad of new avenues for disseminating critical advisories with remarkable speed and specificity.

3.1 Introduction

One of the most important functions to the AAS units is to widely disseminate the advisory bulletins among the user community. A unit cannot be considered operational unless its bulletins are reaching the target masses. The dissemination is one way communication which is broadly speaking the process by which human beings share information, knowledge, experience, ideas and motivation. 

Dissolved oxygen (DO) refers to oxygen gas that is dissolved in water. Fish are able to absorb oxygen directly from the water into their bloodstream using gills. There are three main sources of oxygen in the aquatic environment: 1) direct diffusion from the atmosphere; 2) wind and wave action; and 3) photosynthesis. Oxygen depletion refers to low levels of DO and may result in fish mortality. A concentration of 5 mg/L DO is recommended for optimum fish health. Sensitivity to low levels of dissolved oxygen is species specific, however, most species of fish are distressed when DO falls to 2-4 mg/L. Mortality usually occurs at concentrations less than 2 mg/L. If fishes gulfing on the water surface and also show the low swimming in the water it indicates deficiency of dissolved oxygen in pond.

The goal of food for all can be achieved only through sustained efforts in producing, saving and sharing food grains.

The Supreme Court of India has rendered great service by arousing public, professional and political concern about the co-existence of rotting grain mountains and mounting hungry mouths. In several African countries hunger is increasing because food is either not available in the market, or is too expensive for the poor. Food inflation is showing no signs of abating. In our country, chronic hunger is largely poverty induced. The progress made in achieving the UN Millennium Development Goal No. 1, namely, reducing hunger and poverty by half by the year 2015, has been far from satisfactory and the available data indicate that we may have years and years to go before we achieve this target. Globally, the number of persons going to bed hungry has increased from 800 million in the year 2000 to over one billion. The position is likely to get worse in the near term, since the prices of wheat, rice and maize are going up in the global market. Adverse growing conditions in Russia, Canada and Australia are partly responsible for the recent escalation in grain prices. Nearer home, Pakistan is recovering from serious floods. According to a recent UN report, 3.2 million ha of standing crops and 200,000 heads of livestock have been lost. 

Soil is a bioorganic - mineral complex of the loose surface layer of the earth’s crust. Soil microbiology is the science that deals with the millions of microscopic forms of life found in the soil. It is stated that one hectare - foot (one hectare to a depth of 30cm) contains 2 to 10 metric tons of living microorganisms. Soil microorganisms are in a constant struggle for existence and are believed to be in a state of dynamic equilibrium. Without microorganisms, the soil would be an inactive geological mass incapable of supporting plant life and without plant life, animal life would not be possible. This soil population consists mainly of bacteria, fungi, actinobacteria, algae, and protozoa. The soil ecosystem includes these microbial groups as well as the inorganic and organic constituents of a given site. The collections of cells represented in the community are considered as distinct populations. All the inhabitants of the particular locality make up the community.

Types of Microorganisms in Soil

Living organisms both plants and animals, constitute an important component of soil. The pioneering investigations of several early microbiologists showed for the first time that the soil was not an inert static material but a medium pulsating with life. The soil is now believed to be a dynamic or rather a living system, containing a dynamic population of organisms/microorganisms. Cultivated soil has relatively more population of microorganisms than the fallow land, and the soils rich in organic matter contain much more population than sandy and eroded soils. Microbes in the soil are important to us in maintaining soil fertility and productivity, cycling of nutrient elements in the biosphere, and sources of industrial products such as enzymes, antibiotics, vitamins, hormones, organic acids, etc. At the same time certain soil microbes are the causal agents of human and plant diseases.

ABSTRACT

Presence of mangrove ecosystems on coastline, save lives and property during natural hazards such as cyclones, storm surges and erosion. This study is undertaken to assess the distribution of mangroves in Tamil Nadu. Geographical Information System, Remote Sensing and GPS (Global Positioning System) were used for mapping the mangrove forests. Mangrove wetland map and species zonation maps have been done using didital analysis of Remote Sensing data and ground truth information. The total area of mangroves found in Tamil Nadu and in Puducherry is around 4100ha.

1. INTRODUCTION

Mangroves are typical, tropical specialized trees growing in the saline and brackish water system. Mangrove plants live in muddy and wet saline soils. They are trees associated with shrubs, growing both on the sheltered coast and inland, lining the bank of estuaries and rivers. They are an ecological group of evergreen plant species, belonging to different families, but possessing marked similarities in their physiological characteristics and structural adaptations. Mangrove areas are associated with high leaf production and leaf fall and rapid decomposition of the litter.

Mangrove forests perform multiple ecological functions: They produce woody trees, provide habitat and detritus food for fish and shellfish and act as spawning ground for a variety of fishes, prawns and shellfishes. They harbour a variety of valuable fauna, including migratory birds. They also protect the coasts from storms and tidal waves and help in the formation of land by trapping sediments brought by the coastal community.There are many threats to mangroves. Deforestation is one of the major threats.

Introduction

There is different type of distributors available in the market. Depending on the basic principle of working they may be broadly classified into three major groups as below (FAO, 1980).

i. Distributors in which head loss takes place through small diameter tubes

ii. Distributors in which head loss takes place through some orifice control

iii. Distributors in which head loss takes place through a vortex action

There are many adaptations to distributors though the working distributors fall under the above stated basic principle. Tiny perforation in the laterals or porous materials allows leaking out the water serves the purpose of distributors. The compensating type distributors have long path in it to dissipate the energy and drips almost same rate within certain range of pressure variation. Whatever may be the distributors proposed to be used, the discharge characteristics should be known. The discharge characteristics should be provided by the manufacturers and preferably certified by any authorized body; otherwise to be tested by the designer before recommendation to large-scale use.

Crop diversification has been well recognized as an effective strategy for achieving the objectives of food and nutritional security, income growth, poverty alleviation, employment generation, judicious use of land, water and other natural resources, sustaining agricultural development and environmental improvement. Vegetable crops being rich sources of various health building substances, especially vitamins and minerals, offer unique advantage for food and nutritional security, tackle malnutrition and dietary deficiency diseases. Besides, their high yield potential per unit area and time, diverse varietal wealth, labour intensiveness, high market price and prospects of processing, value addition and export, they play an important role in employment generation, and livelihood improvement. Since India is endowed with diverse agro-climatic conditions, almost all kinds of vegetable crops are grown in one or other corner of our country. More than 200 different vegetables are grown in India, of which, about 70 types are cultivated commercially. Vegetable production scenario in India has made a remarkable progress since independence from a meagre production of 17.5 million tonnes to 146 million tones, with a productivity of 17.3 t/ha. India is the second largest vegetable producer in the world after China. However, it needs to be doubled by 2020 in order to meet the nutritional requirement of burgeoning population in the country. With increasing purchasing power of people, the demand for vegetables has increased enormously, as a result the prices of vegetables have increased and it has been the dominant factor for high inflationary pressure in Indian economy during recent years. Inclusion of different vegetable crops with shorter maturity period in the prevailing cropping system will enhance the total system productivity, which may go a long way in improving the economic as well as physical health of small and marginal farmers.

Farming system is a complex inter-related matrix of soil, plants, animals, implements, power, labour, capital and other inputs controlled in part by farm families and influenced by varying degrees of political, economic, institutional and social forces that operate at many levels. In farming system there is integration of farm enterprises such as cropping systems, animal husbandry, fisheries, forestry, sericulture, poultry etc.

Globally, 2 billion children under the age of five suffer from diarrhoea, of which, more than 50% of the cases being in South Asia and sub-Saharan Africa, where the disease is more likely to be fatal (UNICEF-WHO, 2009). It has been also estimated that the great majority of acute diarrhoeal illnesses in children over the age of two years is attributable to bacterial pathogens (Carpenter, 1980). Amongst the various enteric bacterial pathogens, diarrheagenic strains of Escherichia coli are considerably responsible for causing bacterial diarrhea (Nataro and Kaper, 1998).

4.1 General description

Most temperate forest habitats support a small number of animal and tree species with wide geographic distributions, whereas the montane forests support a large number of species with narrow geographic distributions. "For mankind's most prevalent disease, we have a multiplicity of diagnoses, each provided with maximum casualness," Prof Galbrith writes in one of his publications. Poverty is a difficult situation to be in. It would be beneficial if we knew what was causing the problem. Obviously, there isn't a single answer. Many explanations are presented because they include a small amount of truth. However, one reason of poverty is pervasive: the historical or present link between land and people. Food, clothing, and shelter are all provided by the land. Poverty exists if these are not available." This statement by Galbrith, which is relevant for shifting agriculture areas with excessive rains and turbulent rivers, summarizes the genesis and cause of every responsible individual's considerable worry for good land management and soil maintenance. To round out the aspects of this issue, there is need to add 'environment' and 'ecology’ to this.

Many microbes have ability to attach to various surfaces forming three dimensional extracellular matrix within which embedded the microbes grow and multiply forming thin layer structure called biofilm. Biofilms may form on living or non-living surfaces and can be prevalent in natural, industrial and hospital settings (Hall-Stoodley et al., 2004). Biofilm mainly consist of three components - bacteria, matrix and surface. Extracellular matrix generally composed of extracellular polymeric compounds such as extracellular polysaccharides, proteins, phospholipids, DNA, teichoic and nucleic acids, and other polymeric substances hydrated to 85 to 95% water and polysaccharides (Hall-Stoodley et al., 2004).

Abstract

A field study of seven arid districts of Rajasthan was undertaken to evaluate the occurrence of selected tree species and arbuscular mycorrhizal fungal (AMF) associations with them. Five genera were identified in the rhizosphere of these selected tree species. A high diversity of AMF was observed which varied between different host tree species. Among the five genera, Glomus occurred most frequently, with four species, Acaulospora and Gigaspora were found with three species, while Entrophospora and Scutellospora was detected with two species. Gigaspora margarita, Gigaspora rosea, Glomus deserticola, Glomus constrictum, Glomus fasciculatum, Glomus mosseae and Scutellospora calospora were the most dominant species. The AMF spore density was not clearly affected by the host tree suggesting that biotic factors may be relatively less important than abiotic/edaphic factors for establishing population pattern. The spore density of AMF had a strong positive correlation with soil pH and organic carbon content and a negative correlation with Olsen’s P content of the soil. The association with AMF of these tree species native to the harsh environmental conditions of the Indian Thar Desert may play a significant role in the re-establishment and conservation of these multipurpose desert tree species.

Mastitis is a global problem as it adversely affects animal health, quality of milk and economics of milk production. Bovine Mastitis is reported to be the most costly disease of dairy cattle, causing huge economic losses in terms of reduced milk yield, milk discard after treatment, cost of veterinary services and premature culling. While reviewing status of mastitis in India, subclinical mastitis is more important (10–50%) than the clinical mastitis (1-10%). Estimated annual economic losses incurred due to mastitis estimates to Rs.7165.57 crores to dairy farmers (Bansal and Gupta, 2009).

Introduction

Rice contains essential micronutrients such as iron (Fe), zinc (Zn), copper (Cu), calcium (Ca), manganese (Mn), magnesium (Mg), etc. which are generally lower when compared with other staple crops like wheat, maize, legumes, and tubers (Adeyeye et al. 2000). The most crucial micronutrients are iron and zinc, whose inadequacy is a leading cause of malnutrition. In this chapter we discuss estimation methodologies and diversity of Fe and Zn, its genetic basis, and improvement for micronutrient content through breeding techniques.

Procedure of Estimation of Fe and Zn Content in Rice Grain

Iron and zinc concentrations in rice samples were generally estimated by colorimetric method Atomic Absorption Spectrometry (AAS), X-ray Fluorescence (XRF), and Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). X-Ray Fluorescence (XRF) Spectrometry is extremely helpful in the non-destructive estimation of relative Zn and Fe concentration in rice breeding lines and large germplasm collection (Paltridge et al. 2012). The majority of biofortification programs employ XRF as a metal analysis tool. For estimation of Fe and Zn, panicles of middle row plants of each replication were harvested, sun-dried for 4-5 days to reduce the moisture content to 11-12 %, and then seeds were dehusked. Each brown rice sample of about 5g was subjected to energy dispersive X-ray fluorescent spectrophotometer (ED-XRF) as per standard protocol (Stangoulis and Sison 2008, Rao et al. 2014) and expressed in ppm (µg g-1).

Abstract

Nematodes are non-segmented worms typically 50 µm in diameter and 1 mm in length. Those few species responsible for plant diseases have received a lot of attention, but far less is known about the majority of the nematode community that plays beneficial roles in soil. Nematode diversity tends to be greatest in ecosystems with the least disturbance. Species of Aphelenchoides, Ditylenchus spp, Helicotylenchus, Meloidogyne spp., Pratylenchus, Scutellonema  and Rotylenchulus are obnoxious plant parasitic nematode beside Heterodera and Globodera. Soil temperature, soil structure, soil pH, soil moisture and soil texture play major role in movement of nematode, infestation and completion of life cycle under abiotic and biotic stresses.

Abstract

Desert or arid regions present a unique environment for microbial growth. Thar Desert of India harbours a plethora of nitrogen fixing bacteria ranging from symbiotic nitrogen fixers, free living nitrogen fixers, associative nitrogen fixers and blue green algae or cyanobacteria. But the knowledge and extent of diversity is still limited to explore their full potential. On top of that, the documentation of the available knowledge is also scattered. Nitrogen-fixing bacteria are crucial for the protection of the nitrogen supply for vegetation in the arid region. Since deserts are poor in soil nitrogen, biological nitrogen fixation plays a crucial role in maintaining soil fertility. In this article, an attempt has been made to cover the nature and extent of diversity in nitrogen fixing bacteria in Indian arid zone.

ABSTRACT

Pesticide degradation is the breaking down of toxic pesticides into a non-toxic compounds and, in some cases, down to the original elements from which they were derived. The most common type of degradation is carried out in the soil by microorganisms, especially the fungi and bacteria. Microbial degradation depends not only on the presence of microbes with the appropriate degradative enzymes, but also on a wide range of environmental parameters. Pesticides which are rapidly degraded are called non-persistent while those which resist degradation are termed as recalcitrant (persistent). Microorganisms are able to degrade a large variety of compounds, including pesticides under laboratory conditions. However, methods have yet to be developed to decontaminate the environment from pesticide residues. Continuous efforts are required in this direction, and at present several PGPR capable of degrading pesticides have been isolated from the natural environment. Catabolic genes responsible for the degradation of several xenobiotics, including pesticides, have been identified, isolated, and cloned into various other organisms such as Streptomyces, algae, fungi, etc. In addition, recombinant DNA studies have made it possible to develop DNA probes that are being used to identify microbes from diverse environmental communities with a unique ability to degrade pesticides. Bioremediation treatment still requires more intense research through specific microbial degradation of broad range of organic pollutants. This review describes recent advances in biodegradation of pesticides by addressing the microbes involved in pesticide degradation.

Microbial diversity is the key to human survival and economic well being. It provides a huge reservoir of resources which can be utilized for our benefit. Yeasts have been isolated from many sources for industrial purposes. The impact of yeasts on food and beverage production extends many fold beyond the popular notions of bread, beer and wine fermentations by Saccharomyces cerevisiae.

Diverse dynamic mixed populations of prokaryotic and lower eukaryotic microorganisms govern the fermentation and maturation processes and, finally, impact the quality of wine. Both of these parameters apparently contribute to regional differences in the quality of produced wines and characterization of regional wines should involve the study of microbial populations and their members active in the given region.

1.1 R and R studio

R has become the world-wide language for statistics, predictive analytics, and data visualization. R is not limited to statistics; it has a wide range of tools for spatial analysis and digital image analysis and can handle any process needed for image analysis flexibly. It offers a wide range of methodologies for digital image processing, from the most basic to the most complex. As an open source project, it’s freely available for a range of platforms, including Windows, Mac OS X, and Linux. An integrated development environment (IDE) for R, R Studio, allows interactive execution of R functions with user interface. RStudio is available in two formats - RStudio Desktop and RStudio Server - both available in free and fee-based (commercial) editions.

1.1.1. Download and install R

The R software setup files can be downloaded from any of the widely distributed Comprehensive R Archive Network (CRAN). To download R, please choose your preferred CRAN mirror, a location close to you. Follow the following steps:

The main purpose of this lecture note is to provide basic information on patent drafting skills and train applicants for drafting a patent in clear and concise manner.

We will see the components of Complete Specification through the following Case studey (1) of a solar water heater. The figures are provided below for reference and better understanding.

Dragon fruit, commonly known as pitaya/pitahya (Hylocereus sp.) is a  climbing perennial cacti belonging to the Cactaceae family and the subfamily Cactoidea of the tribe Cactea (Raveh et al., 1993). It is a perennial climbing cactus plant native to tropical areas of North, Central and South America. Main countries growing dragon fruit are Vietnam, Colombia, Mexico, Costa Rica, Nicaragua, Thailand and Taiwan. Cultivation also occurs in Australia, Israel and Reunion Island. The European Union and Asia, especially China are the largest import markets of dragon fruits (Vinas et al., 2012).

Drainage - definition

Agricultural drainage is the artificial removal and safe disposal of excess water either from the land surface or soil profile, more specifically, the removal and safe disposal of excess gravitational water from the crop root zone to create favourable conditions for crop growth to enhance agricultural production.

Benefits of drainage

a)It provides better soil environment for plant growth by creating favourable soil aeration conditions.

b)It improves the soil structure and in turn increases the soil infiltration.

c)High infiltration capacity reduces soil erosion.

d)It hastens the warming of the soils and maintains desirable soil temperature, which accelerates plant growth and bacterial activity.

e)It promotes increased leaching of salts and prevents accumulation of salts in the crop root zone.

f)In well drained soils, less time and less labour are required for tillage operations.

Technical Term      Definition

Drainage               Removal and disposal of excess water from agricultural lands is referred as drainage.

SUMMARY

The natural drainage systems are severely affected by the development processes and thus increased in waterlogged and salt affected areas. In major and medium irrigation projects due to inadequate designs coupled with poor management practices has raised groundwater table and in turn sizeable command areas are being affected both by water logging and soil salinization, Water logging and salt problem have been experienced in irrigation projects all over the country. Both adversely affect the growth and the yield of the crops. An area with water table within 2 m from the land surface is called as water logged area. It is potential to water logging if water table is between 2-3 m from the land surface. It has been estimated that around 16.71 million hectare land is affected by salt and waterlogging in India. The drainage is the remedy to these problems for sustainable agriculture.

            Drainage is defined as the natural or artificial removal of surplus ground- and surface water and dissolved salt from the land in order to enhance agriculture production. In the case of natural drainage the excess waters flows from the fields to lakes, swamps, streams and rivers. However, in an artificial system surplus ground or surface water is removed by means of sub surface or surface conduits. Improved drainage create a healthier environment for plant growth, It conserve soil and water; and provide drier field conditions for ease in farm operations for the crop production. Agricultural drainage is must to realize the full benefit of irrigation.

Agricultural land drainage is adopted for removal of excess surface and subsurface water, either from irrigation or rainfall in order to improve the profitability of land use.  Drainage also plays a role in removal of salts from the root zone. Therefore, land drainage is closely linked to irrigation in arid and semi arid regions. India has a long history of practicing irrigation and drainage in its semi arid irrigated regions. During the ancient times in the Indus Valley dams and drainage system were built for cultivation of different crops. The earlier experience of drainage was more concerned with surface drainage because from time immemorial India has been experiencing floods of varying magnitudes.

Introduction

In the process of creating a hole in the metal surface through a drill, we use a drilling machine. We use a tapper shank and parallel shank to tie the drill to the drill machine. We can also use a drilling machine to do extra experiments i.e., tapping rimming counter shrinking and counterboring. In simple language, we also say that a, it is a machine which is wildly used over world for making a circular hole in various metal workpiece for making desired design or structure.

Crop Water Requirements

In designing an irrigation system, the primary objective is to know the water requirement of crops. Water requirement of crops are determined either by f ield cultivation or by estimation through commonly used empirical formulae such as Blaney Criddle, radiation, Penman or pan evaporation method.

Definitions

Crop water requirement or evapotranspiration (ETcrop ): It may be defined as the rate of evapotranspiration of a disease free crop growing in a field of not less than one hectare under adequate fertility and water supply so that full productive potential can be achieved in prevailing environment. Evapotranspiration requirement of a crop refers the ETcrop and expressed in mm/day.

Reference crop evapotranspiration (ET0 ): It is the rate of evapotranspiration from an extended surface of 8 to 15cm tall green grass of uniform height, actively growing, completely shading the ground and not short of water. ET0 may be computed by using the empirical formulae and meteorological data for the specific period.

Introduction

Drip irrigation is an efficient method of application of water at the plant bottom at a rate nearly equal to the consumptive use rate of the plant, thereby minimizing the conventional water losses like percolation, runoff and evaporation from soil. It is a process of slow application of water on, above or beneath the soil by the surface, sub-surface, bubbler, and spray or pulse system. Fertilizer can also be applied with the drip water. Emitters or applicators are placed closed to the plants and used to spray water in the form of drops, tiny streams or miniature spray. In the drip system water applied from the point source advances in all direction in the soil outward from the source. Drip irrigation is essentially a low rate, low pressure, frequent and long duration application of water in plants root zone area.

Drip irrigation is also called as localized irrigation, trickle irrigation, daily f low irrigation, diurnal irrigation, drop irrigation, sip irrigation, and micro irrigation. A particular name is being popularized in any area depending on the choice of the people of that area. The International Commission for Irrigation and Drainage (ICID) has recommended the term micro-irrigation while the American Society of Agricultural Engineers (ASAE) has preferred drip irrigation. In India it is told as drip irrigation.

Aerial photography is objective of getting panoramic view of earth surface to analyze the features of earth and their interrelation at particular time period which may be changed in further events. In this concerned, the observation may play a vital role in achieving the goals of photography. Undoubtedly it is widely used in social function and so on, but still awaited for scientific or research use. Drone can measure the geometry of ground surface at lower altitude with more accuracy in the form of visual feature in natural colour. flight height of drone mainly limits the large area coverage due to lower flying and drone can work perfectly at low altitude planning with good quality feature/photography.