eChapters

Aerial photography is objective of getting panoramic view of earth surface to analyze the features of earth and their interrelation at particular time period which may be changed in further events. In this concerned, the observation may play a vital role in achieving the goals of photography. Undoubtedly it is widely used in social function and so on, but still awaited for scientific or research use. Drone can measure the geometry of ground surface at lower altitude with more accuracy in the form of visual feature in natural colour. flight height of drone mainly limits the large area coverage due to lower flying and drone can work perfectly at low altitude planning with good quality feature/photography.

Fundamentally toposheet represents a kind of map in which topographic features of particular area is given details on the map features in two dimensional land surfaces. It shows both horizontal and vertical portion of the terrain with a combination of contour lines, contours, symbols, labels and related representation together in one piece of paper. Toposheet portray the shapes, location of mountains, many natural and manmade features, and the toposheet combinedly uses for extracting accurate information about particular area containing land surface features.

Age old practice of photography was taken with still camera in parallel direction, not aerially scan or snapping which really present wider prospective of any object or places in rearranging or planning skilfully in two dimensional working. Earlier aeroplane played a important role in over head condition to capture snaps but again accuracy and angle of camera limited the works because these photographs were diagonally or trigonally not matched the reality of ground.

Preparation of base map being in mind, the forest, agriculture, water, road and boundary are almost same for all but theme may be different as per requirement. Base information is to survey and need terrain information, the preparation includes land forms by separation of water, kart area, coastal area. Meanwhile preparation of focus might be on DEM (Digital Elevation Model) and water movement helps in demarcation of boundaries on map.

Cartography has much back history than what we seen in portable form by its name or definition. Many prehistoric painting of caves had their own time frame record of maps, artifacts and design have been preserved hoping that they are sufficient to the era of forgotten habit and culture, and treasure explicit ancient world. The ancient wall painting of seventh millenium BC, might have indication of oldest maps in the world and the painting is assumed to be the location of ancient city Antolia as Mellaart, depicted 1967. Onward 600 BC, the modern form of cartography started to develop map. The pioneer contribution in map designing and development, old Greek and Roman were main contributor in this direction. One Greek Philoshopher Ptolemmy, multi-talented genius are recalled in this context, who later credited with first documented map of world during production of Geographica, is a treatise on cartography, very soon one Arabian Scholar Muhammad Al-Idrisi prepared a medieval Atlas involving knowledge of world collected by Arabic merchants in 1154.

GPS stands for Global Positioning System, basically Navstar GPS is a radio based space aviation system developed by United state government which was operated by United State Air Force. It provides geographic location and time related information to GPS receivers under global navigation satellite from anywhere of earth where unobstructed line of sight to 4 or more GPS satellite co-ordinate (Anonymous, 2018). Even GPS not required any user for transmitting data, with working independently on any telephonic or internet receivers; through these technologies we can enhance usefulness of the GPS location based information. The GPS serves as critical positioning capacity to various fields like army operation, civil aviation, and commercial scope to wider scope in around world.

In modem days, many informations receive through electronic media with instant connecting by satellite based information on social, economical, environmental etc. the informations are coded with feasible electronic encrypt and delivered to people. Similarly remote sensing, GIS (Geographical Information System) and GPS (Global Positioning System) also serve world for better understanding the ground reality along with reducing cost of operation, transforming data through electronic webs easily. In earlier phase, ground related information was not easily obtained because all kind of work had been done manually using analog maps of earth; even map draw was done by drafting from totposheet or hand maps, no interface of analog and digital world.

Appendix - 1:
Physical Properties of Seed – bed / Puddled Soil

Tillage is the process of getting the soil ready for planting and maintaining it loose and weed-free while the crop is growing.  The main goal and core function of tillage are broken down into three phases:

1. Creating a suitable seedbed,
2.  Eliminating weed competition, and
3.  Enhancing the physical quality of the soil.

10.1. Acts, Policies and Schemes that Benefit Farmers
10.1.1. PM-KUSUM

As part of its Intended Nationally Determined Contributions (INDCs), India agreed to increase the installed capacity of electric power from non-fossil fuel sources to 40% by 2030. The Pradhan Mantri Kisan Urja Suraksha Evam Utthaan Mahabhiyan Scheme aims to ensure energy security for Indian farmers while also upholding this commitment. The PM-KUSUM Scheme was launched in 2019 with 3 components:

7.1. What is Energy Conservation?

In order to protect resources for future use and to lessen environmental degradation, energy conservation refers to actions performed to limit energy use.

.2. What is Energy Efficiency?

The definition of energy efficiency is the use of less energy to carry out a task or achieve a goal. Homes, buildings, and manufacturing facilities that use less energy to manufacture things require less energy to heat, cool, and operate appliances and electronics.

6.1. Calculation of Energy Requirements for Field Operations
The energy needs for a certain field activity can be determined by adding the amounts of human, bullock, mechanical, and/or electric energy consumed.

Operational Costs for Various Power Sources
Manual power

In the case of human labour, the wages of unskilled employment are charged on an hourly or daily basis (as determined by the location).In the case of research farms, the costs for operating a pair of bullocks are determined on the basis of the cost of a pair of bullocks, the salary of an operator, the cost of bullock feed, and any other expenditures (as imposed in a given location). For the farmer’s fields, however, the real hiring expenses are used as the foundation.

5.1. Introduction

The energy equivalent can be considered to be an alternate energy unit, precisely related to units such as the joule, calorie, or Btu. In energy talks, many units are employed. They are divided into two categories: (a) basic units and (b) source-based units.

Energy in Agricultural Context (FAO)

Agriculture’s fundamental and foremost function is to produce food and other primary products, so contributing to food and nutritional security. Sustainable Agriculture and Rural Development (SARD) attempts to promote ecologically non-degrading, technically suitable, commercially successful, and socially acceptable development in the agriculture, fishery and forestry sectors. Achieving food security necessitates policies that promote social, cultural, political, and economic stability. Integrating agriculture’s economic, social, and environmental roles can help to attain these objectives.

Agriculture may provide a variety of non-food commodities and services. This can include its application as a viable, long-term source of energy. According to the FAO, agricultural activities and related land use directly contribute to non-agricultural functions such as social, environmental, economic and cultural products and services. They can have major advantages or disadvantages. Research reveals that, in addition to food security, agriculture contributes significantly to attaining sustainability at the local, national and global levels in rural development, energy and the environment. The efficient operation of the market encourages the identification and strengthening of these many functions, as well as the development of new techniques and technologies. Plant and crop-based resources are utilised as raw materials in a wide range of industrial goods, including wood for paper and board production, starches for adhesives, and vegetable oils for paints and resins.

Introduction to Energy Sources

Consumption of nonrenewable energy sources has caused more environmental harm than any other human activity during the last century. Electricity generated from fossil fuels like coal and crude oil has resulted in excessive levels of hazardous gases in the environment. As a result, several issues exist now, such as ozone depletion and global warming. Vehicle pollution has also been a significant issue.

As a result, alternative energy sources have become increasingly vital and relevant in today’s society. These sources, such as the sun and wind, can never be depleted and are hence referred to as renewable. They produce fewer emissions and are readily available locally. Their application has the potential to significantly reduce chemical, radioactive, and thermal pollution. They stand out as a promising source of infinite clean energy. These are also known as non-conventional energy sources.

Energy is a critical component of the economic infrastructure, as it is the primary input required to support economic growth. Economic development and energy use have a close relationship. The higher a country’s per capita energy usage, the more developed it is and vice versa. Human civilization is dependent on several energy sources.

Definitions of Energy

Energy is a key topic in science and technology, as well as in society in general. In terms of energy, a typical definition found in popular literature as well as textbooks is “energy is the ability to do work” or, much more precisely, “energy is the capacity of a system to do work” [Atkins 1990].

Energy is described as the ability to generate change or carry out work, and that work can be separated into numerous easily identifiable tasks: Energy produces light, heat, motion, sound, growth, power and technology etc.

Abstract

Non-structural carbohydrates are the primary product of photosynthesis in plants. Glucose, fructose, sucrose, and so on are examples of Non-structural carbohydrates (NSC). These are free carbohydrates having a low molecular weight that are involved in the creation of structures. Plants’ principal photosynthetic product, the NSC, is involved in metabolic processes and plays a critical role in plant functional characteristics. In a recent laboratory inter-comparison, NSC concentration measurements had very minor uncertainty due to different extraction and quantification techniques. Different techniques such as High-Performance Liquid Chromatography (HPLC), Gas Chromatography-Mass Spectroscopy (GC-MS), Near Infra-red spectroscopy (NIRS), anion exchange chromatography, chemical approaches such as the Anthorn assay approach, and certain kits are used to detect NSC in plants. This review will cover the methods for measuring NSC in plant tissues and attempting to infer its dynamics, as well as how to apply these tools to go beyond simply monitoring plant carbon connections such as “how much NSC is there and where it is located” to “under what conditions and to what extent is NSC used” to support plant function.

Abstract

Wheat rusts, caused by Puccinia spp., are one of the major constraints for sustained wheat production. Significant progress has been achieved in the management of wheat rusts and understanding of wheat-Puccinia host-pathogen systems. The key research frontiers of wheat rusts research comprised disease epidemiology, the discovery of novel sources of resistance and their transfer into superior cultivars, pathogen surveillance for monitoring the virulence profiles of variants of rust pathogens, and the application of genomic technologies in cereal rust research. This chapter gives an overview of the research and development outcomes achieved to minimize the yield losses caused by wheat rusts during the last 90 years in the Indian subcontinent. Wheat rusts have been mainly controlled via genetic means; however, an integrated approach by combing the fungicides was carefully considered when needed. All efforts of managing wheat rusts in the future must cover the identification and transfer of genetically diverse rust-resistance sources with a reputation of durability into agronomically superior genotypes. The understanding of wheat rusts epidemiology globally and the region-specific virulence pattern of Puccinia spp. should be considered for gene deployment. The next-generation tools such as CRISPR-cas9 and other genome editing approaches are likely to be part of wheat rust management within a few decades.

Abstract

Global consumption of wheat during 2021/2022 marketing year reached to 787.4 million metric tons (https://www.statista.com/aboutus/our-researchcommitment/1239/m-shahbandeh). It shows about 4.4 million metric tons increase from the previous year. With the increase in population a significant increase in wheat production is needed to feed 9.7 billion mouths by 2050. A very limited effort can be directed to increase area under wheat production. Diseases and pests of wheat cause significant reduction (>30%) in production and 11-15% of total post-harvest losses of food grains were reported in India, which equates to about 20 million tonne (Basavaraja et al. 2007) and more than AUD10 million per year (Singh 2010). Thus, saving wheat from diseases can significantly contribute to the 2050 food security goal.

Abstract

The current photosynthesis of flag leaf is the most crucial source of assimilates that are essential for grain development in wheat. Translocation of these assimilates from the leaf to grain takes place in the form of sucrose. However, environmental cues that influence assimilate balance between the leaf and the developing grain which act as source and sink respectively determine grain yield prospects of wheat. The assimilate translocation system that links source and sink can also play a significant role. Hence, this aspect of assimilate supply has been a focus of research over the past few decades for crop improvement particularly under abiotic stress environment that tend to alter source-sink balance by impairing physiological and developmental processes in plants. Grain growth is mainly triggered when the primary assimilates meet the metabolic needs of the developing grains through the current photosynthesis or through assimilates stored in the form of Non-structural carbohydrates in stem. Hence, the improvement of photosynthetic capacity to synthesize sucrose, its storage remobilization, and utilization becomes imperative under abiotic stresses. Various aspects of Non-structural carbohydrates in wheat stem have been estimated, and efforts have been made to reveal the mechanisms of assimilate partitioning. In this context this chapter discusses strategies to improve grain yield with greater insights into the photosynthetic carbon assimilation, the pathways actively involved in the transport of sucrose from source to sink and their utilization at the sink organ. The information related to assimilate supply to the developing wheat grain under high temperature and drought stress conditions can provide opportunities to translate this knowledge into traits for improvement of climate resilience in wheat.

Abstract

Plants store structural carbohydrates (SCs) and Non-structural carbohydrates (NSCs) to buffer source–sink interactions at various phases of growth and under diverse environmental conditions. Structural carbohydrates (cellulose, lignin, hemicelluloses) provide structural integrity to the plant and the Nonstructural carbohydrates (sugars and starch) plays important role in growth, respiration, osmotic regulation, defence and helps in maintaining the carbon balance. Abiotic stresses such as drought, heat, salinity, and lodging etc. restrict the growth and development of plant which culminates into lower yield. Hence, the role of Non-structural carbohydrates needs to be elucidated for achieving desired crop improvement interventions to mitigate the harmful effects of climate change and having sturdy crop system. Improving our understanding of whole-plant sink–source dynamics and further optimising them will have far-reaching consequences in the near future.

Abstract

Carbon is the backbone for the life of all living beings. Carbohydrates are metabolic currency of plants as they provide building blocks for energy and biomass accumulation. Carbohydrates include both structural and Nonstructural carbohydrates. Structural carbohydrates like cellulose and lignin are long chain molecules for the building of plants reserves and structural support. These are main constituents of plant cell wall, stem, stalks etc. Non-structural carbohydrates (NSC) like monosaccharides, disaccharides, oligosaccharides, polysaccharides, sugar alcohols are important constituents in plants metabolism. The Non-structural carbohydrates (NSC) pool is very important for plant to meet the inadequate carbon requirement under night and stressful conditions. The quantity and distribution ratio of NSC in different tissues is an ecophysiological feature to understand the adaptive strategies of plants. Substrate for biosynthesis of NSC produced from photosynthesis. Sucrose and starch majorly involved in transport, energy metabolism, osmoregulation of plants.

Abstract

Carbohydrates are the primary product of photosynthesis and key source of energy in plant and therefore play important role in plant growth and development. Plant carbohydrates are classified into two categories structural carbohydrates and Non-structural carbohydrates (NSCs). NSCs are main component of vegetative tissue and inside the cell they are present in plastids, cytosol, apoplast and vacuoles. Starch is the storage carbohydrate and is used in unfavorable condition on other hand soluble sugars support functions like supporting new growth and defense as they are intermediary metabolites, osmolytes, and substrates for transport. Under unfavorable condition carbon assimilation is less than the plant demand and under such condition these NSC act as “food pantry” which allow sessile plants to cope up unfavorable condition. Pattern of NSC accumulation may also differ for canopy/distal branches, stems and roots, depending on how drought has affected transport of NSC within the plant. These NSCs protect plants during desiccation and against freezing damage by stabilizing proteins complexes and membranes. Thus, NSCs are important carbohydrates for the growth and development of plant during normal as well as in stressed condition.

Urbanization, industrialization, and economic growth in India have all led to an increase in the generation of municipal solid waste (MSW) by a number of urban local bodies (ULBs). In cities with high population densities, SWM is a significant difficulty. Being a diverse country with a wide range of religious communities, customs, and traditions like India makes it more challenging to accomplish sustainable development in a country that is rapidly industrialising and improving its standard of living. Although there have been substantial changes in the social, economic, and environmental spheres, India’s SWM systems have mostly remained the same. Currently, 90% of residual waste is thrown in the informal sector rather than properly disposed of. To make SWM more sustainable, new management practises and disposal sites are needed. The inefficiency of the current waste management systems has a detrimental effect on the economy, the environment, and public health. The Ministry of Environment and Forests of India introduced regulations for garbage treatment, although there is irregular and insufficient compliance.

5.1 Waste Treatment and Disposal

Source reduction and feeding the hungry are significant considerations for decreasing avoidable food waste. However, non-edible wastes like livestock manure, agricultural wastes, and unusable food wastes are also classified as organic wastes. The environment and general public’s health may be seriously endangered by improper treatment of these wastes. Wastes can contaminate surface and ground waterways by runoff or leaching if they contain pathogens, chemicals, antibiotics, and nutrients. The breakdown of organic waste also results in the production of methane. As is well known, methane is a powerful greenhouse gas that captures more heat into the atmosphere than carbon dioxide. It is possible to remove organic waste and turn it into biogas, a sustainable energy source that can be utilised to reduce greenhouse gas emissions and the likelihood of stream pollution. Further emission reductions are made possible by replacing fossil fuels with biogas, sometimes leading to carbon-negative systems.

4.1 Biomass Energy Resource

Among the various methods for producing electricity, biomass is one of the most common. This method uses animal waste, wood pellets, etc. to produce electricity. The use of biomass energy has proven beneficial over time and has the potential to be both reliable and consistent as an alternative energy source.

Organic matter is simply referred to as biomass. Or, to put it another way, biomass is anything living or ever living, including animal waste, crop waste, garden trash, etc. As a result, biomass renewable energy is the energy produced during the use of biomass. Biomass derives and stores its energy from the sun, which is absorbed by plants through a process known as photosynthesis. Plants contain chemical energy that is passed to animals and then eaten by people. Various plant and animal products, including sugarcane, corn crops, wood chips, and even dung, can be utilised. These substances, also referred to as feedstocks, are converted into a biomass fuel.

Wastewater is defined as water that has been altered by certain substances, resulting in changes in its physical, chemical, or biological properties. These changes render it unfit for certain uses, such as the purpose of drinking. Since almost all of man’s daily activities are dependent on water, therefore ‘waste’ is discharged into the surroundings as a result of these actions. There are a number of substances that can be harmful to the environment and make people sick, including chemicals, detergents, household cleaners, dirt, microorganisms (germs), and body wastes. The water supply generates a great deal of wastewater, so it is essential that it is treated in order to reduce the amount of waste that it generates. Essentially, wastewater treatment ensures that a healthy environment is created and public health is protected by removing the majority of pollutants found in wastewater through the treatment process. Consequently, wastewater management plays an important role in protecting the planet, and public and economic health, as well as social, economic, and political stability.

The basic methods for wastewater sewerage (collection, treatment, and disposal) are as follows:

• Off-site sewerage
• Separate sewerage system
• Combined sewerage system
• On-site sewerage

Many nations have implemented separate sewage systems that transmit sewage and storm water through separate pipelines in order to separate the two. Storm water often does not contribute to a wastewater treatment facility (WWTP). Domestic sewage contains 99.9% or more water. The remaining portion is made up of bacteria

Industrial waste can be solid, liquid, or gaseous in type and is generated by industrial activities throughout a manufacturing process. Depending on its nature, it can be hazardous or non-hazardous. It is important to note that hazardous wastes can be ignitable, toxic, reactive, corrosive, or radioactive and can pose a threat to the environment. Industrial waste includes, among other things, paints, concrete, paper goods, sandpaper, metals and chemical solvents. Most industries face a significant problem associated with the disposal of waste. Due to the significant expenses involved, it is not feasible to collect and treat all of the waste due to the sizeable volume of waste produced by numerous businesses. As a result, especially in developing nations, the majority of industrial wastes are illegally deposited on wastelands like deserted fields

1. Leading cut flower exporter in the world is Netherlands.
2. Concept of lawn was developed in England.
3. In which garden, arrangement of rocks is main feature Japanese garden.
4. Shrubs or trees planted at regular intervals on boundry for fencing Hedges.
5. The green carpet for the landscape maintained by growing and mowing grasses. Lawn.
6. Thorny fencing plant used as a hedge Inga dulcus.

1. Who was the first Entomologist to the Government of India? Lionel de Niceville.
2. Who succeeded Lefroy and devoted his attention mainly to insect taxonomy and built up an excellent library and a valuable insect collection? T.B. Fletcher.
3. When was the Zoological Survey of India started in the Indian Museum at Calcutta? 1916.
4. Who was the first Plant Protection Adviser to Government of India? Dr. Hem Singh Pruthi.

1.The fine earth covering land surface acts as a reservoir of nutrients and water Soil.
2.The word ‘Soil’ is derived from Latin.
3. Study of origin, classification, morphology of soil is known as Pedology.
4. The study of soils in relation to crop growth Edaphology.
5. The father of Soil Science Dokuchalev.

1.Agronomy is derived from Greek word.
2.Indigenous plough cuts ‘V-shape furrow’.
3.Indigenous plough is a primary tillage implement.
4.The ploughing depth of chisel plough is 60-70 cm.
5.Hoe is an example of secondary tillage implement.
6.Tillage improves soil aeration.

1. Father of agronomy is -Peter Decresenzi.
2. Dr. Biwant Rajis the founder of Relay cropping.
3. The Indian Institute of Farming System Research is located at - Modipuram, Meerut, U.P.
4. Scientific study of mixed cropping was firstly done by -La-Flitze (1928).
5. Relay cropping concept was derived from -Relay race.
6. Natural Resource Management is an example of Sustainable Agriculture.
7. Cropping System is a component of -Farming System.

Q.1 Fill in the blanks

1. _______and_______are pulse crops.
2. Rice is a_______pollinated crop.
3. Different breeds of cattle are_______and_______
4. _______and_______are sugar crops.
5. _______Important cereals are_______and_______
6. _______and_______are examples of fibre crops.
7. _______Dapog method is originated from_______
8. The origin of rice is_______region.
9. Best temperature range for germination of wheat is_______oC.
10. Adsali sugarcane is of_______months duration.
11. _______portion is taken in cane for propagation

Farming System Approach (FSA)

Farming systems refers deliberate raising of crops,forest and fruit trees, animals including fisheries, piggery and duck farming, sericulture, mushroom, on a given unit of land to increase the productivity and profitability, to upgrade natural resource base and to achieve overall improvement in the environment

The philosophy behind shifting from cropping system to the farming system mode involves

1. In situ recycling of organic residues including farm wastes generated at the farm to reduce the dependency on chemicals
2. Decrease in cost of cultivation through enhance input use efficiency,
3. Effective use of bye-products/wastes of one component for the benefit of other component/components
4. Upgrading of soil and water quality and bio-diversity,

The women is the backbone of agricultural workforce and are a vital part of Indian economy. Over the years, there is a gradual realization of the key role of women in agricultural development and their contribution in the field of agriculture, food security, horticulture, dairy, nutrition, sericulture, fisheries, and other allied sectors. Women form the backbone of agriculture, in India, Comprising the majority of agricultural laborers, women have been putting labour not only in terms of physical output but also in terms of quality and efficiency. With various targeted efforts, her enlightenment will change the face of rural India.

Women make essential contributions to the agricultural and rural economies in all developing countries. Their roles vary considerably between and within regions and are changing rapidly in many parts of the world

Power transmission through belts, pullies, gears, speed and size

Both stationary and portable types of agricultural machines make use of various types of power transmitting devices for doing useful work.

Some of these power transmitting devices are meant to convert rotary motion into linear motion or oscillating motion.

This transmission of power from generating unit to useful unit is possible through belts, pullies, gears, cams and couplings are also employed to transmit power. eg. The self propelled combine is a machine which employs most of the above power transmitting devices.

In some machines the belt drive is used to transmit power between two parallel shafts placed a short distance apart. In others a sprocket and chain drive is preferred, when the two parallel shafts to be operated

Being an agricultural country with 1/5^th of the world’s population of cattle and half of the world’s buffaloes. The cows and bullocks are the backbone of agriculture and play major role in the rural economy. India stands first in milk production in the world. Corresponding increase in human population, the per capita availability of milk is 145 gm/day which is far lower than the recommended level of 285 gm/day/head.

Importance of Livestock Management

• Provides milk and milk products. Milk is a perfect food as it contains proteins, fat, milk sugar, minerals and vitamins. It is the only source of animal protein in vegetarian diet.
• Livestock gives us meat.
• Provides farmyard manure

Vegetables: Three conditions shoul1d be met to be called a horticultural produce as a ‘vegetable’ viz.

• Vegetables are herbaceous plants
• They mostly serve culinary purpose
• They are also used in small quantity in a raw form.

Scenario

Area

• India is the second largest producer of vegetables in the world, next to China. India’s share of the world vegetable market is around 14%.
• India produces 188.28 m tonns

Potato (Solanum tuberosum L.)

Potato is the third most important food crop in the world after rice and wheat in terms of human consumption. Potatoes are an important staple food crop. Introduced into Europe in the 16th century by Spanish explorers, it is cultivated throughout the world including the Indo-Pakistan subcontinent.

Botanical Name : Solanum tuberosum L.

Family : Solanaceae

Importance

• Potato is an economical food, as it provides a source of low cost energy to human diet.
• For vegetable purposes, potato has now become one of the most popular crops in India and cultivated in almost all states and under very diverse agro climate conditions.
• Potatoes are a rich source of starch

Berseem is very important rabi season legume fodder and popularly know as the “King” of fodder crops.

Berseem (Trifolium alexandrinum L.)

Berseem, also called Egyptian clover, is an important winter forage.

Family : Leguminaceae

Importance

• It is quite nutritive and succulent highly pelatible. It has 20% crude protein and 70% dry matter digestibility
• Forage is also rich in calcium and phosphorus.
• Berseem cultivation changes chemical characters of soil

Sugarcane (Saccharum officinarum)

Sugarcane is an important agro-industrial crop of tropical and subtropical region of the world. Sugar industry is next to textile industry provide employment to large number of people. It is the main crop of earning foreign exchange. It shares about 2% GDP.

Family : Gramineae (Poaceae)

Importance (Second largest agro-based industry)

• It is cash crop used for sugar, Jaggery (Gur) and Khandsari.
• Green top is used as green fodder. Dry leaves used as mulching and as a fuel.
• Bagasse (By product) is used as fuel, for the production of fibre board, paper etc. and for power generation (electricity).
• Molasses is used in distilleries for the manufacture of alcohol and is also used as an additive to feed livestock.
• Press mud is used as soil amendments, organic manure

Cotton

Cotton is one of the most important fiber and cash crop of India and play a key role in economic and social affairs of the world. Cotton is referred to as “King of Fibres” and also known as “White Gold”. India is largest produces of accounting for 22% cotton in the world. Nearly 65 per cent of the cotton crop is grown under rainfed conditions. Cotton production, processing and trade provides livelihood to several millions of people.

Scientific Name : Gossypium hirsutum

Family : Malvaceae

Origin: Cotton has been used as a fabric in India from time immemorial. It has been cultivated in the Indus Valley for more than 5000 years before. The excavations of Mohen-jo-daro indicates a high degree of art in spinning and weaving with cotton at that time. It finds mention in the Rigveda, the oldest scripture of the Hindus. Manu also refers to it in his Dharma Shasta. India appears to have been the centre of an important cotton industry as early as 1500 B.C.

Five major oilseeds are groundnut, sesamum, Rapseseed and Mustard, linseed and castor seed. India has the largest area and production of oilseeds in the world. Indian vegetable oil economy is the fourth largest in the world next to USA, China and Brazil.

Importance

• Oilseeds are sources of oil, protein, carbohydrates, vitamins like Vitamin A, D, E and K and also contain 18 essential aminoacids and trace elements.
• Edible oils are next to food grains in Indian diet.
• Vegetable oils are mainly (95-98%) triacylgycerols which are made up of one glycerol molecule and three fatty acid molecules. Quality of oil depends upon the nature and proportion of the fatty acids present in three triacylglycerols.
• Vegetable oils have a number of industrial uses such as soaps, detergents, plastic films, metallic foils, Condiments, Cosmetics, Plastic, Polymers, Organic coatings, Printing ink, Oiled cloth

Pulses are edible seeds of the family Leguminosae, sub family papilionaceae, and are integral part of Indian diet. Indians consume 30 per cent of the world’s pulses, but domestic production of pulses has not kept pace with population growth. Pulses are called “poor man’s meat” as pulses are rich in protein, which is double the protein content of wheat and three times that of rice. Globally, 190 mha of pulses contributes to 5-7 mt of nitrogen in soils.

Pulse means

P = PEOPLE (major source of dietary protein)

U = UMBRELLA

L = LIVESTOCK (green nutritious fodder and feed)

S = SOIL (builder and restorer of soil fertility through biological nitrogen fixation and green manuring). E = ENERGY.

Introduction

India is the world’s second largest producer of rice, wheat and other cereals. The important cereals are-wheat, paddy, sorghum (Bajra), barley and maize etc. India is not only the largest producer of cereal as well as the largest exporter of cereal products in the world.

Foodgrain production (2019-20): 296 million tonnes

Scenario

Table: States producing maximum area and production of crops in India

Global warming is the hottest issue facing life in our times. The gradual average increase in air temperatures near Earth’s surface over the past one to two centuries is leading to the phenomenon called global warming. It is this global phenomenon that triggers climate change, threatening the entire life on Earth. Earth’s climate has changed over all conceivable geological timescales, but that was all on account of the natural phenomenon. But, human activities are making the phenomenon more pronounced since the beginning of the Industrial Age, now emerging as a dominant triggering factor in influencing the overall climate fabric of the planet.