eChapters

Maize is a tall, determinate annual C₄ plant varying in height from (1-4) meters producing large, narrow, opposing leaves (about a tenth as wide as they are long), borne alternately along the length of a solid stem. The botanical features of various plant parts are as follows: 

Root

Root system of maize consists of seminal roots, crown or coronal or adventitious or fibrous roots and brace, pop or aerial roots. Seminal roots - which develop from radical and persist for long period. Crown roots developing from the lower nodes of stem below ground level which are the effective and active roots of plant and.  Brace or prop roots, produced by lower two nodes. The roots grow very rapidly and almost equally outwards and downwards. Favorable soils may allow corn root growth up to 60 cm laterally and in depth.

Abstract

Higher plants can be exploited for the discovery of new bioactive products that could serve as lead compounds in pesticide development because of their novel modes-of-action. Different secondary metabolites of higher plants have been reported to exhibit efficacy as fungitoxicants as well as mycotoxin inhibitors. Pest controls using the botanicals are safer to the user and the environment because they break down into harmless compounds within hours or days in the presence of sunlight. The article presents different plant products found efficacious as antimicrobial and inhibitory to mycotoxin secretions by fungi. Their prospect as safe alternatives to synthetic antimicrobials in plant protection has been discussed.

Onion is an economically significant bulb crop cultivated across diverse agroecological environments. Its cultivars vary considerably in bulb size, shape, colour, pungency, maturity, storage behaviour and photoperiod response. Understanding its vegetative and reproductive morphology, growth habit, physiology and taxonomic relationships is fundamental to crop improvement and germplasm conservation. This chapter examines the botanical features and taxonomic position of onion within the genus Allium. It explains relationships among cultivated types, landraces and allied species and discusses varietal classification according to climatic adaptation and consumer preference. Classical characterization and molecular taxonomy are considered important tools for developing productive, resilient and market-preferred onion cultivars.

Abstract

Formulation  of  any  action  plan for women needs understanding of their  access  to  and  control over the resources. To have deep  insight into  this  aspect, a study  was  undertaken with 240  small  and  marginal  farm  women  randomly  selected  from  eight  villages  of  four districts  in  Andhra Pradesh  in  consultation  with  officials of agriculture department. Using an interview schedule, impediments  for development  of  farm  women  (social, economic, psychological, extension and technical)  were  collected  and  prioritized  through  matrix ranking.
To  overcome  social  and  economic  constraints, gender  mainstreaming  and  budgeting  are  now recognized as the most important strategies  for  women’s empowerment at all stages of any developmental  programmes. Such an approach necessarily aims at achievement  of  gender equality. Organizing capacity building programmes in managerial, entrepreneurial, negotiating and leadership skills improves risk taking  ability (psychological) and enhances active participation of farm women in developmental activities.

The Indian Himalayan region is a well known abode to numerous plants of medicinal significance. The Western Himalayan ranges are home to a diverse flora of variety of endemic medicinal plants making it a biodiversity-rich region (Samant et al., 1998).  The ancient system of traditional medicines has been using these endemic medicinal plants since time immemorial. Of late the resurgence of herbal system of medication has led to an unprecedented rise in extraction of such plants from the wild for medical preparations. Most of the times the plant collection is unscientific and unthoughtful of ecological status of the medicinal plant, especially herbs. As a result, unplanned collection and other human interferences have brought a threat to survival of several important medicinal plants of the IHR an  example being  Brahmakamal.

INTRODUCTION
The brake is a crucial component used to stop or slow down the movement of a tractor. It is typically mounted on the driving axle and is controlled by two independent pedals. Each pedal can be operated separately to help with turning the tractor during field operations, or they can be locked together using a locking mechanism. The two main types of brakes are: a) Mechanical brake, and b) Hydraulic brake.
The braking system plays a critical role in the transmission system of a tractor, as it is responsible for slowing down or halting the tractor’s movement. Brakes function by converting the kinetic energy of the moving tractor into heat through friction between a rotating and a stationary component. Let’s explore the commonly used braking systems in tractors.

Introduction

Man’s intervention in the evolution of plants, to adapt them to suit his needs, constitutes the practice of plant breeding. Historically regarded as an art and still too empirical to be accepted universally as a science, it has recently been described as a technology (Riley 1978). Whether art, science or technology, it certainly draws on a wide range of disciplines and embodies all those principles of organisation and management that determine success in any production-oriented programme.

Perhaps the biggest contribution that the plant breeder has made to increased production during the past 50 years has been in helping to alleviate the effects of natural hazards such as lodging, pests and diseases on crop production. While most of this progress has been through the manipulation of biotic stresses, much is still to be achieved under non-biotic stresses such as drought, salinity, temperature, etc. This argument is strengthened by the fact that in spite of the spectacular achievements made possible by the ‘Green Revolution’, the productivity level of most crop plants, including wheat and rice, has remained both low and static under stress conditions. Concerted efforts are needed through an approach of interdisciplinary research, since not much has been done to define criteria for stress assessment and evolving breeding approaches for incorporating stress tolerance in crop plants.

All hybrids and varieties perform better under conventional farming in response to excess use of chemical fertilizers and pesticides, which are harmful to humans, animals and environment. Hence, there is a need to develop varieties/hybrids exclusively for organic farming. Breeding aspects of organic farming include breeding tools/methods which are used to breed varieties/hybrids including testing and multiplication under organic conditions duly following the principles of organic farming as defined by IFOAM. These cultivars should have high nutrient use efficiency, resistance to diseases and pests, competitive ability against weeds, higher yield and stability across environments along with enhanced nutritional quality. This book chapter briefly discusses the aspects of breeding that are involved in generating cultivars suitable for organic farming.

1. Introduction

Currently, organic farmers rely heavily on conventionally developed and produced varieties. Nevertheless, in order to optimize their production under organic agriculture, it is necessary to develop cultivars that are more suitable for organic cultivation. According to some studies, the naturalness of organic agriculture should go beyond simply by avoiding chemical inputs and substituting natural and organic components during the transition from conventional to organic farming.

Expression of genetic potential for growth and yield of a crop variety is directly dependent upon the environment comprising both climate (weather) and soil components. As discussed in the preceding chapter, the term ‘salt-affected soils’ encompasses a broad group of adverse but distinct soil conditions, namely, saline, alkali (sodic) and acid soils with further variations such as coastal and inland locations as well as arid and water-logged situations (Swaminathan 1977; Bresler et al. 1982). Factors limiting growth and yield of crop plants in various categories of problem soils are different and specific. Likewise, adaptive strategies evolved by plants to cope with the prevailing edaphic stresses, such as salt stress, also vary a great deal as indicated in Table 1. It is not unexpected therefore, that even varieties within a crop often show notable differences regarding tolerance to adverse soil conditions (Epstein et al. 1980; Devine 1982; Shannon 1984; Sayed 1985). Hence, it is essential that the breeder must understand the inherent charaderistics of the problem soil with which he is concerned and should also simultaneously appreciate that basically it is the sensitivity of crop variety, rather than the soil parameters per se, that essentially determines the occurrence as well as the magnitude of actual soil problem (Rana 1977). Since the degree of tolerance (adaptation) of crop varieties to different kinds of salt affected soils is genetically controlled, it is axiomatic that it can be improved through genetic manipulations by adopting suitable breeding procedures.

Crop production is challenged by abiotic and biotic stresses results in low yield and high production costs.

Magnitude and intensity of stresses are increasing dramatically due to climate change causing recurrent droughts, increased temperature (heat) and emergence of new diseases and pests.

5.1. Characteristics of asexually propagated crops

Majority of them are perennials

Many of them show reduced flowering and seed set.

Invariably cross pollinated.

Mostly polyploids.

Many species are inter specific hybrids.

4.1. Synthetic varieties

Produced by crossing in all combinations, a number of lines that combine well with each other.

3.1. Selection

To isolate desirable plant types from a population.

3.1.1 Progeny test

Evaluation of growth of plants on the basis of performance of their progenies

Real value of plant could be known by studying the progeny.

4.1. Flower and flowering in pigeonpea

Growth habit: Primarily, there are two major growth types in pigeonpea. These are determinate and non-determinate. The determinate growth in the pigeonpea plants is characterized by flowers in bunches at the top of the canopy (Fig 17a). In this case the epical growing points are transformed in to reproductive buds and bunches of flowers appear on the top of the canopy. Such cultivars are not popular as the management of insects such as Helicoverpa and Maruca becomes very difficult. Most of the cultivated types belong to another growth category called as non-determinate. In such genotypes the apical growing points remain vegetative and the plants keep growing under favorable conditions and it results in tall canopy with many spreading or compact branches. The inflorescence in this case emerges from the axil of secondary and tertiary branches (Fig 17b); and hang sideways. These types show less susceptibility to insects due to non-clustering nature of flowers.

The country is at long last becoming sensitive to the serious consequences of the growing rural-urban divide in terms of investment, infrastructure and opportunities for income and employment. The rural-urban divide also leads to an expanding rich-poor divide. Since crop and animal husbandry, fisheries, forestry, and agro-processing are the main sources of rural livelihoods, the current agrarian crisis is adding to the problems of hunger, poverty and unemployment. According to the Union Planning Commission, we are off-track in achieving most of the UN Millennium Development Goals. A major cause for the growing rich-poor divide both between and within nations is unequal access to modern technology. Technology helps to achieve a paradigm shift from unskilled to skilled work and thereby move large numbers of the rural poor from the primary to the secondary and tertiary sectors of economic activity. If technology has been a major factor in promoting economic and social divides in the past, the challenge now lies in enlisting technology as an ally in the movement for economic, gender and social equity.

Brainstorming is a group creativity technique by which efforts are made to find a conclusion for a specific problem by gathering a list of ideas spontaneously contributed by its members. The term was popularized by Alex Faickney Osborn in the 1953 book Applied Imagination. Osborn claimed that brainstorming was more effective than individuals working alone in generating ideas, although more recent research has questioned this conclusion. Today, the term is used as a catch all for all group ideation sessions.

Origin

Advertising executive Alex F. Osborn began developing methods for creative problem solving in 1939. He was frustrated by employees’ inability to develop creative ideas individually for ad campaigns. In response, he began hosting group-thinking sessions and discovered a significant improvement in the quality and quantity of ideas produced by employees.

Broad dhaniya (Eryngium foetidum L.: Umbelliferae - Apiaceae) is an underutilized leafy vegetable and aromatic plant used for seasoning food items and source of medicine. It is a shade loving plant of tropical regions.  It has got status of a promising cash crop with huge export potential particularly in United Kingdom, USA and Middle East markets. Its medicinal and seasoning properties are well known in various countries like Vietnam, India and in the Amazon region (De Gumao et al., 2002). Broad dhaniya is relatively unknown in many other parts of the world and is often mistaken and misnamed for its close relative Coriander (Coriandrum sativum L.).

Introduction The world recently celebrated the birth of its eighth billionth baby, a major milestone in the development of the human race and the doubling of our numbers in 47 years. This tremendous growth has been driven by ambitious advances in technology and health care, soaring achievements of global prosperity and a longer life expectancy that has come to a staggering 72 years. However, the glory of these achievements is marred by how we are failing the lion’s share of the global population in meeting their basic requirements. Almost one in seven people on our planet do not have enough to eat. Food and nutritional insecurity are detrimental to human development and are a major brake on overall socio-economic development which downplays any major accomplishments we have made since not having enough to eat is an international security issue. Adequate food production, easy access and the capacity to buy food, relevance concerning nutrition and stability of these elements are all necessary for sustainable food security (Helland and Sorbo, 2014).

Browntop millet (Urochloaramosa) is a warm-season crop that produces seeds that are heavier than other millet varieties. This crop is cultivated in several types of soils and climates. Browntop millet is an introduced grass that originated in Southeast Asia. It is grown in Africa, western Asia, Arabia, China, and Australia. It was introduced to the United States from India in 1915. It is also useful for controlling erosion, producing hay, feeding wild animals, and producing grain for human use. In addition, it is also utilized as a crop for wild animal food. In dry and semi-arid regions, millets constitute the main food supply. Although India is the main producer of millet, output and use have fallen. Browntop millets are nutrient-dense. Browntop millet is a miracle crop for arid and rainfed areas. Nearly all of the necessary nutrients are found in browntop millets.