eChapters

18.1. Determination of Available Micronutrient Cations (Zn, Cu, Fe and Mn) in Soil

The available micronutrient cations (Zn, Cu, Fe and Mn) can be estimated in a single extraction with diethylene triamine pentaacetic acid (DTPA) as proposed by Lindsay and Norvell (1978). DTPA has the excellent property to combine with free metal ions in the solution forming soluble complexes. The stability constants of metal-DTPA complexes make DTPA as a most suitable extractant for simultaneous complex formation with Zn, Cu, Fe and Mn. In calcareous soil DTPA extractant may result overestimation due to excess dissolution of CaCO_3, thus releases occluded micronutrient cations which are not plant available. To avoid this excessive dissolution of CaCO₃, DTPA is buffered at pH 7.3 using triethanol amine (TEA). At this pH major part (3/4^th) of TEA is present as HTEA⁺ (protonation) and exchanges for Ca and Mg ion from the soil exchange site. This increases concentration of Ca and Mg in the solution phase and suppresses dissolution of CaCO₃. The DTPA has the capacity to complex each of the micronutrient cations 10 times of its atomic weight and it ranges from 550 to 650 ppm depending on the micronutrient cation.

The amount of cation in the extract is determined on an atomic absorption spectrophotometer (AAS). The experimental condition such as shaking time, DTPA concentration, pH and temperature during shaking influence the amount of Zn, Cu, Fe and Mn extracted. Increase in shaking time and temperature markedly influence the extractability of these cations.

There are nine essential micronutrients, namely, iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), boron (B), molybdenum (Mo), chlorine (Cl), vanadium (V) and nickel (Ni). Out of these, Fe, Mn, Zn, Cu and Ni (Dominic et al., 1978) are taken up by plants in their ionic form X²⁺, Mo as MoO^2-, chlorine as Cl^– form and boron as boric acid (H₃BO₃) or as its ionic form B (OH)₄ ^–. The absorption of vanadium by plants has received only limited attention (Lepp et al., 1983); it may be absorbed as cation V or vanadyl (VO²⁺) and anion vanadate (VO₄ ^3–). Bulk of the information is available on Fe, Mn, Zn and Cu, because of the acceptability of the single DTPA (Diethylene triamine pentaacetic acid)–CaCl₂ extraction test of Lindsay and Norvell (1978) for availability of all these four nutrients followed by their estimation on Atomic Absorption Spectrometer (AAS). Available B is estimated by hot 0.15 M CaCl₂ extraction method (Saha and Singh, 1997). Molybdenum data base is poor, because its determination is dif?cult and Mo de?ciency in crops has not been much noticed in India. Chloride is available in plenty in irrigation water and soil in India and has not received much attention in India.

Abstract

Impact of climate change and related stresses on plant productivity are being witnessed worldwide with developing countries being more vulnerable due to more dependency on agriculture. Microorganisms can play important role as economic and farmer’s friendly strategy to combat abiotic stress in agriculture. A wide range of microorganisms associate with plants, and many of them confer beneficial effects to their hosts through different mechanisms like production of growth promoting substances, nutrient acquisition, protection against plant pathogens etc. In the last few decades, role of microorganisms in imparting tolerance to plants against different abiotic stress has been reported in many crop plants. Under stresses conditions, plant-microbe interactions become more common towards coping with the stress. Selection and application of efficient abiotic stress tolerant microorganisms can be a fruitful strategy to alleviate negative effects of abiotic stresses in plants.

The adoption of modern agricultural technologies has culminated into serious problems of pesticide resistance in major pests, resurgence in minor pests, elimination of populations of natural parasites, predators and pollinators, environmental pollution, pesticide residues in food chain and health hazards. World Health Organization (WHO) estimates one million pesticides poisoning cases and 20,000 deaths every year globally. This is due to high pesticide residues in food chain including cereals, pulses, vegetables, fruits, milk and milk products (including mother’s milk), fishes, poultry, meat products and water. Twenty five per cent of Indian food products contain pesticide residues above tolerance level compared to only 1.2% globally.

Herbicides are the chemical substances used to kill weeds, i.e., unwanted plants that compete with crop plants for soil nutrients. Chemical herbicides are the most effective immediate solution to most weed problems. Use of chemicals, however, can be harmful to wildlife, to the environment and to humans. Chemicals are also expensive, and weeds develop resistance to the chemicals. For these reasons, there is now a move toward alternative methods of controlling the weeds. One of the most promising is biological weed control, which involves using one living organism to control the activities of another organism.

Emphasis of present day agriculture is to produce more with lesser land, water and man power. Apart from natural calamities like drought, flood etc., biotic stresses like pests, diseases and weeds also influence the crop productivity greatly. Sixty to eighty per cent of the total crop losses are attributed to the devastations caused by pests and diseases. Farmer’s income in recent years is decreasing gradually due to increased cost of inputs particularly in plant protection. The excessive dependence on chemical pesticides leads to the development of resistance in insect pests and pathogens, out breaks of secondary pests and pathogens / biotypes and occurrence of residues in food chain. To avoid this situation the concept of Integrated Pest Management (IPM)/ Integrated Disease Management (IDM) approach should be considered on top priority.

Sustainable agriculture or organic farming wherein biological inputs are maximum and chemical inputs are minimal, is drawing the attention of farmers across the world including India. For replacing chemical fertilizers, which supply plant nutrients by organic manure, the basic requirement is the availability of raw material i.e. the organic matter or biomass that can be decomposed to organic manure. The question that is often asked is what are the different sources of available biomass and how much of it is available? Different sources of biomass can be categorized as

Phosphorus is one of the essential nutrients for plant growth. It is an integral part of the cellular activities of the living organisms. It has a defined role in plant metabolism such as cell division, development, photosynthesis, break down of sugar, nutrient transport within the plant, transfer of genetic characteristics from one generation to another and regulation of metabolic pathways. Phosphorus is a frequently limiting macronutrient next only to nitrogen for plant growth and makes up about 0.2% of plant dry weight. The plants obtain their P requirement from the soil pool. It occurs in soil as inorganic phosphates, produced by weathering of parent rock or as organic phosphate derived from decayed plant, animal, or microorganisms.

5.1 Introduction

According to Croxton and Cowden, “Either for one’s own use or for the use of other, the data must be presented in some suitable form”.

Now – a – days everybody uses tables in one form or another, and accountants use them quite often. The work become tedious, especially if you had to do for 12 columns for the 12 months of the year, and more so if there were some modification to be done after having set up the entire table. The Americans have a special name for such tables- spreadsheet which makes life easy.

Steve Jobs and Steve Wozniak two young Americans in 1976 AD developed the first desktop computer – The Apple which was not user friendly and needed programming for useful work. Dan Bricklin, Robert Frankston and Dan Fylstra proposed a program to turn the computer’s memory into a giant virtual spreadsheet where necessary corrections and modifications could be done fairly, quickly and easily and marketed the program in 1978 under the trade name VisiCalc. VisiCalc was soon succeeded by Sugercal and other computer programs which were more user friendly. The Lotus 1-2-3 designed and developed by Larry Kaplan put further step, which set the standard for many applications under the IBM, Now a days Microsoft under the leadership of Bill Gates had been working on the sidelines perfecting graphical user Interface (GUI) packages for the PC range of computers that would widen its reach. Now Microsoft office program Suite the integrated word processing, spreadsheet, presentation and data base management.

The spreadsheet package in Microsoft office is called Excel – our basic software, or program for this manual.

1. Introduction
The amount of water present in the soil is called as soil moisture. The soil moisture availability is an important topic to study as it affects plant growth, agricultural outputs and the water resource management as well. The amount of soil moisture present in a place and in a time depends on the factors like soil type, Land use, vegetation cover of the place and evaporation taking place in that area at that time. The amount of water hold by the pores in the soil determines the soil moisture. This water holding by the soil depends on various factors like temperature, moisture levels, organic matters and the soil living organisms (Rasheed et al., 2022). Essential Climate variable (ECV) is very important to our planet which can be recognized by GCOS (Global Climate Observing System). Important sustainable development issues say drought, flood management, food security, ecological health and water resources are being impacted by the soil moisture. Soil moisture changes have also a role in evapotranspiration, rainfall, and the runoff distribution and intensities. (Zeng et al., 2023).
Soil moisture content (SMC) have a huge impact in shaping the water, carbon cycles of earth and energy balance in different scales of time and space. It is an important factor for the effective water management due to its influence on the precipitation, surface temperature and evaporation which will be affecting the processes say river runoff, vegetation health, and irrigation practices. The highcost traditional methods make to overlook for SMC in environmental modelling (Edokossi et al., 2020). The atmospheric and the land surface process are blinked by the key facto of SMC as said by Robinson et al. (2008). For gaining the knowledge on water, carbon cycles and energy as well as for studying extreme weather conditions, understanding soil moisture is very much needed. (Vereecken et al., 2014; Li et al., 2007; Seneviratne et al., 2010; Robock & Li, 2006).
Due to the soil moisture’s impact on the factors say when to plant, when to blossom and when to harvest the crop, soil moisture should be considered as the important factor as it is in improving the water resources and boost the agricultural output. Remote sensing methods like microwave remote sensing plays vital role in creating maps depicting the distribution of soil moisture spatially and temporally high resolutions. These maps help in effective crop planning, in-season drought assessment, irrigation and soil managements. The traditional methods like TDR probe, Soil moisture utilizing neutron probe and gravimetric methods are inefficient in studying the soil moisture with high spatial and temporal resolutions due to factors like Variations in terrain, soil type and land use pattern. We can overcome these and enhance our ability to map soil moisture in different scales through the recent advancements of microwave remote sensing (active and passive microwave remote sensing) which are having advantages like clear, accurate and timely measurements of soil moisture content.
Irrigation water sources are controlled through the soil moisture studies by executing the sustainable water management plans and by monitoring high yields despite the environmental changes, increasing water demands and climate changes. To predict the agricultural output, irrigation management, drought early warning, creating vegetation indices, soil moisture study with high temporal and spatial resolutions will be a key factor as it improves the crop stress reduction also which are the major driving forces of yield reduction (Doraiswamy et al., 2004). So, the soil moisture has a direct impact on the crop yield which are studied using variable rate technology say selective application of pesticides which can improve farmers financially as well as environmentally (Harris et al.,1964).

Millets or nutri-cereals are the ancient grains which have now regained the interest of the scientific community as the super grains. These exhibit excellent nutritional and technobiofunctional profile apart from exhibiting tolerance to biotic and abiotic stresses. The millets are gluten free and show high in vitro protein digestibility, resistant starch content, antioxidant and prebiotic potential providing health benefits for all age groups ranging from paediatrics to geriatrics. The presence of certain anti-nutritional factors can lower the bioavailability of proteins and minerals. Processing enhances the nutritional and functional properties by increasing the antioxidant content and lowering the antinutrients. Different value added products can be prepared by incorporating millets thereby enhancing the nutritional and functional attributes. It is necessary to bring millets into regular consumption by the food industry in the interest of nutritionally and health-conscious consumer.

1. Introduction Millets, also known as “smart crops” or “miracle grains,” are a group of small-seeded, hardy cereal crops that have been cultivated for millennia. They are used as a staple food in many of the countries particularly located in arid and semi-arid regions. Millets have been overshadowed for quite a long time by commonly consumed cereals like wheat, rice, and maize. Nevertheless, they have made a remarkable comeback in our cuisines owing to the growing awareness and recognition of the numerous benefits at individual and environmental level. These small, drought-resistant grains play a pivotal role in addressing some of the most pressing global issues like food security, malnutrition and climate change.

Millets are a type of minor cereals found in the Poaceae family. Millets are often described as “Nutri-Cereals” since they contain more nutrients than commonly produced main cereals. They are an important part of human’s diet in the world. These are foods with a high nutritional content, gluten-free and have nutraceutical qualities. The adequate amount of protein (essential amino acid), micronutrients and phytochemicals are found in millets. The phytochemicals found in millet grains enhance human health by lowering cholesterol and phytates in the body. Millets are full of antioxidants, minerals including dietary fibre, iron, calcium and magnesium that are vital for battling a variety of diseases. These are beneficial to include in our daily diet because the grain is healthy and nutritious. They decrease blood pressure, prevent cancer and lessen the chance of tumour growth. The rich nutrient content in millet has many health advantages such as cancer, obesity, lower risk of cardiovascular disease, gastrointestinal issues, migraines and asthma. People utilise millet-based products to fight a variety of nutritional deficiencies and diseases.

Millets which are also known as “Shree Anna” are a type of grass with small seeds that belongs to the Poaceae family and are widely grown throughout the world. Millets have high levels of proteins, minerals, vitamins, and antioxidants that why they are known to be climate-change-resilient crops. Proteins are essential amino acids that the body cannot synthesize and are used as a nitrogen source during embryo development following germination. Millets are high in dietary fibre and are important staple crop in many parts of the world. They are versatile grains that can be used to make a variety of food products, including millet flour. Millets are good for cardiac health, weight management, antioxidant activity, and may have anti-cancerous properties. They are nutrient- dense, provide sustained energy, and contain antioxidants such as polyphenols and flavonoids. Millets are considered safe and have a variety of health benefits. Surprisingly, millets perform major non-millet cereals in terms of nutrition. They are particularly high in dietary fibres, minerals, antioxidants, phytochemicals, and polyphenols, all of which have broad-spectrum positive effects on human health.

Introduction

Millet is a very important cereal grain that many people around the world eat. In fact, over a third of the world’s population consumes millet. It’s the sixth most produced cereal crop globally. Some common types of millet include Jowar (Sorghum), Sama (Little millet), Ragi (Finger millet), Korra (Foxtail millet), and Variga (Proso millet). Among these, Bajra and Sama have more fat, while Ragi has the least. Millet has been cultivated for thousands of years and is used in many parts of the world. In the past, even the Romans and Gauls enjoyed millet-based porridges. Today, China, India, Greece, Egypt, and various African countries are the major producers of millet. In rural areas, some types of millet, like Finger millet and Sorghum, are eaten by people, while others are primarily used as animal feed. These millets have packed with several beneficial nutrients and play a crucial role in traditional diets in many regions. Compared to commonly used rice and wheat, millet is three to five times more nutritious. While wheat and rice mainly provide food security, millet offers not only food security but also health benefits and livelihood opportunities. It can help manage health issues like diabetes and high cholesterol.

In India, Karnataka is the top producer of millets, accounting for over 58% of global production. Despite its nutritional and health benefits, many people in India are not aware of the advantages of consuming millet. (Upadhyaya et al., 2007). Millets are fantastic crops when it comes to pest management. Traditionally grown millets don’t require pesticides and the land used for millet cultivation remains largely pest-free. Some millets, like foxtail millet, not only resist pests themselves but also serve as natural protectors against pests in storage conditions for other crops like green gram. This means there’s no need for fumigants to keep them safe. It has a treasure trove of micronutrients, including vitamins and beta-carotene, which are now seen as essential as pharmaceutical pills. In the present day, millets are exceptionally superior and serve as a solution to the widespread issues of malnutrition and obesity affecting a significant portion of the Indian population (Singh KP et al., 2012). Millets are rich in essential fatty acids, including linoleic, oleic, and palmitic acids, which are present in their free form. They also contain compounds like monogalactosyl, diacylglycerols, digalactosyl diacylglycerols, phosphatidylethanolamine, phosphatidylserine and phosphatidylcholine in bound forms. Although other fatty acids like arachidic acid, behenic acid and erucic acid are found in millets, they are in trace amounts. Millet oil can be a valuable source of linoleic acid and tocopherols. Additionally, millets are gluten-free and have an alkaline effect in the body. They contain essential B vitamins such as niacin, folacin, riboflavin, and thiamine, as well as phosphorus. These nutrients play a crucial role in energy synthesis within the body.

Introduction

The milling machine is one of the maximum flexible conventional system equipment with a huge variety of steel-reducing capabilities. Many complex operations along with indexing, multi-milling and saddle milling, etc. may be completed on a milling system. A milling device is a tool that cuts steel at the same time as the workpiece is fed closer to a rotating multi-element milling cutter. This machine can also contain one or greater knives at a time. That is why a milling device has extensive utility in production work. It’s better for other machines when it comes to precision and a better surface finish. It is also designed to perform a variety of jobs in the tool room.

Summary

Fertilizers are materials when applied replenish lost soil nutrients on farmer’s field. Without the use of fertilizers farmers would find it extremely difficult to increase their production to meet the ever-growing mouths. The purpose of this session is to discuss what a fertilizer is, and the different terminologies used in fertilizer technology.

The living organisms in the terrestrial ecosystem have unique characteristics of taking up the substances from atmosphere and soil for the synthesis of their own cellular component or as a source of energy. The supply and absorption of chemical compounds required for the growth and metabolism of the organisms may be defined as nutrition and the compounds required by them are called nutrients. The process by which the nutrients are converted to cellular material is known as the metabolism. Out of 118 chemical elements so far detected in the modern periodic table, 92 elements from hydrogen to uranium are naturally occurring, a large portion (more than sixty) of such have been detected in the plant tissues. But, the elements which take part in the nutritional requirement and metabolic processes of the plant are said to be essential elements, others which do not participate in such processes are considered non-essential.

Introduction
A mineral is a naturally occurring substance that possesses distinct physical qualities and a specific chemical makeup. An ore is a mineral or group of minerals that can be used to extract a useful substance, such a metal, and use that substance to makeother useful commodities. In  the crust of the earth, minerals are created over millions of years. These nonrenewable resources are crucial to the advancement of modern civilization. India’s mineral resources are confined to a small number of places and are unevenly distributed. The Chotta Nagpur Plateau region contains almost 90% of our mineral riches. Mining is the procedure used to extract minerals from the earth.
Mining Activities Move Through Four Phases
Mining Procedure
Mining activities move through four phases:
a) Prospecting: Mineral exploration
b) Exploration: Determining the deposit is dimensions, form, location, and economic worth.
c) Development: The process of making the deposit accessible so that minerals can be taken out of it.
d) Exploitation: Mining the minerals and taking them out.

Mineral

A mineral is defined as “a natural substance, usually inorganic, having a definite chemical composition and commonly a definite molecular arrangement which is usually expressed in geometric form”.

Introduction

The inevitability of detrimental effects of climate change is looming large not only on the sustenance of agriculture, but also on the survival and progress of mankind. Estimates by the Organization for Economic Cooperation and Development (OECD) reveal that the atmospheric concentration of GHG would exceed 680 parts per million (ppm) CO₂-equivalents by 2050, which is about 50% higher than baseline year 2010 (OECD, 2012). Additionally, global temperature is predicted to increase by 2°C within this period, resulting in meansea level rise and erraticweather conditions. Consequently, the catastrophic effects on food consumption pattern by the end of 2050 will create malnutrition in at least 290 million people. Agricultural crops provide 63% of the human protein, and additionally supply almost 100% protein to the livestock, which are the second major sources of protein in human diet. Altogether, the detrimental effect of climate change on agriculture would make about 300 million additional people malnourished. Add to that a 2.7 billion increase in human population by 2050, coupled with shortage of water availability that would affect 3.9 billion people by 2050, and one can easily perceive the grim scenario for our kind in not so distant future.

Potted Plants

In urban areas, scarcity of space compels the dwellers to take up gardening on rooftop, terrace, balcony or small space adjacent to the house. Usually, plants are grown in pots or containers for rooftop gardening. Big size pots with diameter of 30 cm or more are required for growing rose plant. It is necessary to prefer tall pots to obtain appropriate growth of the plant having deeper root system. Now-a-days, pots of different materials such as clay, cement and plastic are used for growing potted plants. Usually, clay pots are better than plastic pots as clay is slow in transfer of heat thereby maintaining the root zone cooler. Of course, plastic pots are lighter and suitable for use on the rooftop as those put less load on the building structure. Light coloured plastic is preferred to dark colour as those generate less heat. Although heavier, cemented pots are more durable than earthen or plastic pots. The pots should have adequate drainage facility with holes in the bottom. Besides, a layer of gravel or medium-size stone of one-inch thickness are to be placed at the bottom of the container to facilitate drainage.

Mites have been known as pests of agricultural and horticultural crops since long but now they rank as very serious pests and vectors of many plant diseases. The application and extensive use of pesticides, fertilizer and improved cultural methods have probably favoured increase of the population. Mites as crop pests are confined to certain group of the other acari. Near about 20,000 species have been described of the total mite fauna on a world basis. From India, 660 species of phytophagous mites have been described and nearly 30 species are reported as potential pests (Gupta 1987). Phytophagous mite belongs to family - Tetranychidae, Tenuipalpidae, Tarsonemidae, Eriophyidae and Tuckerellidae. These mites cause direct damage like loss of chlorophyll, stunting of growth, defoliation, reduction in size and quality of fruits, appearance of various types of plant deformities etc. and all these severely affect the yield. Besides causing direct damages, few phytophagous mites inject toxic substances in to their hosts, which cause increased localized growth and disruption of tissue (Jeppson et al. 1975), and many species belonging to family – Eriophyidae are known to act as vectors of plant viruses. The dust entangled in the web formed by tetranychid mites on leaves prevent the sunlight reaching the leaf surface and as result photosynthesis is impaired, the leaves turn pale, yellow and fall down. This affects the vitality of the plant.

In spite of development of irrigation and expansion in transportation and communication; the risk or we can say threat in agriculture sector such as its production and yield has increased in the country. The risk is much higher for farm income than production, as is evident from lower risk in area and higher risk in production. It has been reviewed from the state wise results of area and production which shows that only in the states where irrigation is very consistent; it helped in plummeting the risk and vice-versa. In some states farmers face twin problem of very low productivity accompanied by high risk of production. Also, with the course of time, neither technology nor any other measure helped in reducing production risk in all over the country. Therefore, there is strong need to plan and broaden insurance products or we can say insurance policies for agricultural crops and their production. No doubt various insurance schemes has been launched by the Government of India for covering various agricultural crops in the country as well as in the states but agriculture insurance has served very limited purpose. The coverage through insurance schemes in terms of area under crops, number of farmers and value of agricultural output obtained is very small and the payment of insurance based on area approach fail to notice affected farmers outside the compensated area, and most of the schemes are not workable. It has been viewed in most of the parts of the country. So there is a need to restructure the programme vigilantly to make it feasible and to increase its prospects for future expansion to impact more farmers. This whole process is in immediate need of rehabilitated efforts by Government of India as well as state governments in provisions of introducing new crop insurance policies with full financial support. The government should also extend support to private stakeholders for providing agricultural insurance which in turn will help in increasing insurance coverage and in improving viability of the insurance schemes over time. Moreover the crop insurance policies shouldbe simple in plan so that they are easily understood to the farmers. At last we can say that, good insurance products with good management are key for successful operation of an agriculture insurance scheme all over the India.

SYNOPSIS

Food and nutritional challenges continue to be tackled in East and Southern African countries. Prevailing rates of high malnutrition among children and often in adults in vulnerable geographical locations do suggest the need for appropriate interventions. Of several global nutrition interventions during the 1980s, successful implementation of nutrition programmes in Tanzania, Uganda, Malawi and Ethiopia have established strategies / approaches that are promising.  In Tanzania, the Iringa nutrition programme (WHO/UNICEF Joint Nutrition Support Programme) was implemented during 1983-1988.

Introduction

The foundation of agricultural productivity lies in the realm of weather and climate, a reality unaltered by technological progress. The consequences of climate change on agriculture represent a worldwide apprehension, particularly significant for India. Around 54.6% of the Indian population is engaged in agriculture and allied activities, contributing to 17.4% of the country’s total gross value added. The agriculture sector is battling a multitude of challenges, such as increasing food demand, depletion of agricultural lands and water resources, and the devastating effects of climate change. It is high time that we acknowledge and address these issues to safeguard the future of our food systems and ensure food security for all.

Climate change refers to the long-term variations in weather patterns and temperature over extended periods. Climate change occurs when earth’s climate system experiences variations in weather patterns that can last for decades or millions of years. These changes can arise naturally due to phenomena like volcanic eruptions or changes in solar activity. However, since the 1800s, human activities accelerate the natural pace of climate change, primarily due to the combustion of fossil fuels like coal, oil, and gas. These activities release greenhouse gases like carbon dioxide (CO2 ), methane (CH4 ), and nitrous oxide (N2 O) into the atmosphere, trapping heat and leading to a gradual increase in global temperatures. One of the most remarkable characteristics of climate change is the increase in temperature, which is widely referred to as global warming (Houghton, 2009). According to the report of Intergovernmental Panel for Climate Change, the release of greenhouse gases caused by human actions has contributed to around 1.1°C of warming since the period between1850-1900. The report also predicts that the global temperature will likely increase to 1.5°C or more in the next 20 years (IPCC, 2021).

Introduction

Climate change is a deadliest hazard to life on Earth. Global temperature is rising due to greenhouse gas emissions from the usage of fossil fuels, this result in widespread agricultural and fisheries failure, the extinction of hundreds of thousands of species, and whole towns becoming uninhabitable (Lindwall, 2022). Rising global temperatures are severely killing humans and trees, forcing half of all species to move, worsening water-borne and respiratory ailments in people, and jeopardising millions’ food and water security (Isaacs-Thomas, 2022). Addressing these concerns necessitates a worldwide collaboration to minimise greenhouse gas emissions and promote sustainable behaviours. Climate change affects agriculture production, lowers crop nutritional value, and increases the frequency of extreme weather events. These interruptions jeopardise food production, availability, and access, especially in vulnerable countries. Microbes play an important role in soil health, nitrogen cycling, and ecosystem stability. They impact a variety of soil activities, such as organic matter breakdown, nutrient mobilisation, and plant growth stimulation. However, climate change poses a substantial danger to microbial communities, possibly changing their activities and altering ecosystem dynamics (Wang et al., 2022). Transitioning to a low-carbon economy requires a global effort. Mitigation strategies include enhancing energy efficiency, adopting renewable energy sources, electrifying industrial processes, implementing efficient transportation systems, and introducing carbon taxes or emissions markets.

Introduction

Rising temperature, decreasing precipitation, increased frequency in drought and flooding, etc. is making us realize climate change is not some cooked up story. Still there are people who believes climate change is not real. By definition, Climate change is a long-term shift in global or regional climate patterns. This will affect the life of people in many forms: health, food, water, etc. (Table 1). Agriculture is a highly vulnerable field to such weather and climate changes, they can have significant direct and indirect impacts on farm productivity and profitability. Climate change will have adverse effect on crop physiology, growth and chemistry and thus it will cause negative impact on agricultural production. Because of the variation in climate, moisture availability may change, which limits vegetation activity/plant growth, increase in drought/ heat/flooding will the crop growth and yield. Elevated CO2 does not have a profound effect on C4 plants. On the contrary, tissue nitrogen concentrations are higher for C3 species under increased CO2 . Intergovernmental Panel on Climate Change (IPCC) estimates that climate change and elevated CO2 is expected to increase competitiveness of invasive weed. IPCC also estimates that with 1°C rise in global temperature, 5 to 10 per cent yield reduction of major food and cash crops (Pachauri et al., 2014).

Introduction

Climate change is widely acknowledged as the most significant contemporary challenge facing humanity. According to a recent report from the Intergovernmental Panel on Climate Change (IPCC, 2022), the situation has deteriorated further, with 3.3 billion people worldwide highly susceptible to climate change. Current unsustainable development practices are escalating the exposure of ecosystems and populations to climate-related risks. Human activities and their impact on the climate and environment are leading to unprecedented extinctions of animals and plants, resulting in a loss of biodiversity and posing a threat to life on Earth. The diversity of microorganisms is fundamental to maintaining a healthy global ecosystem, as the microbial world serves as the life support system of the biosphere. Although the influence of human activities on microorganisms is less conspicuous and less well understood, a significant concern is that changes in microbial biodiversity and functions will impact the resilience of other organisms, affecting their ability to adapt to climate change. Microorganisms play crucial roles in carbon and nutrient cycling, as well as in the health of animals (including humans), plants, agriculture, and the global food web. Microorganisms inhabit all environments on Earth occupied by larger organisms and are the exclusive life forms in certain environments such as the deep subsurface and extreme habitats. Dating back to the origin of life on Earth at least 3.8 billion years ago, microorganisms are likely to persist well beyond any future extinction events. Despite their vital role in regulating climate change, microorganisms are seldom the focal point of climate change studies and are typically overlooked in policy development. The challenge lies in understanding their intricate role in the ecosystem due to their vast diversity and varied responses to environmental changes.

Introduction

Climate plays a crucial role in shaping the agricultural landscape of a region, and the changing climatic conditions pose a significant threat to global food security. In developing countries in Asia and Africa, the primary challenges to realizing optimal crop yields are declining soil fertility, particularly soil organic carbon and drought. The unchecked emission of greenhouse gases is expected to lead to a considerable rise in the average global temperature by 6°C in the next century, primarily driven by activities such as fossil burning and urbanization. Over the past centuries, there has been a noticeable increase in the concentration of CO2 and CH4 , with up to a 35% expected rise in nitrous oxide due to the improper use of nitrogenous fertilizers. Climate models predict a substantial impact on agricultural productivity in the 21st century, with rising temperatures and more frequent extreme weather events (NASA, 2022). To maintain agricultural productivity, it is imperative to understand the effects of increasing temperatures, shifting precipitation patterns, and rising CO2 levels on soil health. It is noteworthy that climate is one of the key factors influencing soil formation, alongside four other factors. Temperature and precipitation directly affect soil formation by providing the necessary conditions for weathering and biomass production. The sum of active temperature and precipitation evaporation ratio are critical parameters that determine energy consumption for soil formation, water balances in soil, organic-mineral interactions, and the transformation processes within the soil. However, human activities such as population growth, deforestation, disruption of marine ecosystems, and the greenhouse effect contribute to climate change, leading to denudation, depletion of soil organic matter, destruction of soil structure, erosion, and desertification, ultimately causing a decline in soil health and environmental degradation (IMD, 2021). Despite being a gradual process, climate change, characterized by small, long-term changes in temperature and precipitation, significantly influences various soil processes, particularly those related to soil fertility. The anticipated effects of climate change on soils primarily involve alterations in soil moisture conditions, increased soil temperature, and elevated CO2 levels. Understanding the consequences of climate change on soil health is crucial, as it has far-reaching impacts on agriculture, biodiversity, carbon cycling, and ecosystem resilience in the face of an evolving climate (Nunez et al., 2019).

Introduction

The world’s food and nutritional security are under serious threat from climate change. Climate changes have significant effects on agriculture by affecting insect pests, their natural enemies, and pollinators as illustrated in Fig 1 (Eigenbrode and Adhikari, 2023). According to Benedict (2003), 13.6% of annual crop loss worldwide is attributed to insect pest attack. Crops, crop pests, natural enemies and pollinators are directly and indirectly impacted by erratic climate. The continuous and anticipated alterations in these insects vary across species, systems, and geographical areas, impeding the development of strong generalizations and forecasts. Moreover, the implementation of “climate-smart” agricultural methods, may have additional effects on ideal management of these insects.

Direct effects on insect pests

Temperature: The most reliable, well-researched, and easily modelled component of climate change is warming. Warming affects physiology, phenology, dispersal, reproduction, development, and survival of insect pests (Bale et al., 2002) as illustrated in Fig 2 (Skendži? et al., 2021). It can be inferred that increased herbivory would be associated with rising temperatures in many cases. High temperature and high humidity are key reasons for whitefly population increase (Pathania et al., 2020). Warming can alter the number of insect generations in Helicoverpa armigera (Lepidoptera: Noctuidae) in China (Huang and Hao, 2020).

Introduction

Climate change has significant adverse implications on the physiological processes and metabolic machinery of plants, potentially affecting growth, development, and overall crop productivity. The rapid increase in global population exacerbates the threat to global food security, which is further impacted by changing climate conditions. The Intergovernmental Panel on Climate Change (IPCC) estimates that between 1850 and 1900 and 2011 and 2020, the global mean land surface air temperature increased by 1.6 °C. Predictions by the United Nations indicate that the global human population could reach 8.5 billion by 2023 and 9.7 billion by 2050, up from the current 8 billion. The National Centers for Environmental Information (NCEI) reported that 2022 was 0.86°C warmer than the average of the 20th century, making it the 6th warmest year on record. These data suggest an increased probability of unpredictable climate changes and harsh growing conditions, manifesting as various abiotic stresses on major cultivable lands. Climate change impacts CO2 concentration, temperature, precipitation, pollutants, and nutrient availability and uptake, leading to drought, salinity, irregular rainfall, f looding, high temperatures, and nutrient deficiencies in staple food crops, thereby threatening global food security. This review focuses on the effect of elevated CO2 and temperature on fundamental plant metabolic processes such as photosynthesis, respiration, transpiration, and nitrogen metabolism.

Introduction

The “plant disease triangle” is a fundamental concept in plant pathology that illustrates the interaction between three essential components necessary for the development of a plant disease. Firstly, the host plant which refers to the plant species or cultivar that is susceptible to the pathogen. Host plants provide the necessary environment and resources for the pathogen to establish, grow, and reproduce. Secondly, the pathogen which is any organism (such as fungi, bacteria, viruses, nematodes, or other microorganisms) that can cause disease in plants. Pathogens can infect host plants through various means, including direct contact, airborne spores, soil-borne organisms, or vectors such as insects. And thirdly, the environment which encompasses all external factors that influence the interaction between the host plant and the pathogen. This includes abiotic factors such as temperature, humidity, soil moisture, light, and nutrient availability, as well as biotic factors such as the presence of other organisms (competitors, predators, symbionts) that may affect disease development.

The plant disease triangle illustrates that the occurrence of a disease requires the presence and interaction of all three components: a susceptible host, a virulent pathogen, and a conducive environment. If any of these components is missing or unfavourable, disease development may be inhibited or prevented. Any change in ecosystem can affect plant diseases, because plant disease is the result of interaction between a susceptible host, virulent pathogen and favourable environment. If any of the three factors are altered, the progress of any one disease can change. Although interactions among the three factors must be matched, weather is an important variable due to its dynamic behaviour.

Introduction

Climate change may advance more rapidly than anticipated, introducing novel environmental conditions for cultivating horticultural crops. The rise in atmospheric CO2 levels from non-renewable energy sources combustion drives global average temperatures, altering weather patterns worldwide with regional variations (Stocker et al., 2013). Currently, certain regions are already experiencing the effects of extreme weather events such as heat waves or frost, while prolonged droughts pose a growing threat to global food security elsewhere. Climate changes may yield both positive and negative outcomes, but they will undoubtedly alter production conditions and product quality (Kaufmann and Blanke, 2017).

Elevated temperatures can enhance the ability of air to hold water vapor, leading to increased water demand. This process can elevate evapotranspiration rates, potentially depleting soil water reserves and causing water stress in plants during dry periods. Fruit production is particularly vulnerable to water stress, especially in regions where trees lack irrigation. Numerous studies indicate that water stress diminishes crop yields and hastens fruit ripening (Henson, 2008).

Introduction

Soil is a silent foundation and a dynamic part of Earth’s complex ecosystem. It sustains life, influences plant growth and is involved in various environmental processes. However, the balance of this vital resource is increasingly threatened by the pervasive effects of climate change, manifested by rising temperatures, changing rainfall patterns and changes in atmospheric conditions. As global temperatures rise and weather patterns change, the relationship between soil and climate poses transformative challenges with far-reaching consequences. This research addresses the complexity of this interaction and examines how climate change affects agriculture, soil health, composition and functionality. Soil health, a holistic concept that includes physical, chemical and biological aspects of soils, is closely linked to climate change. A notable consequence of climate change is the increasing frequency and intensity of extreme weather events such as droughts and floods. These events disrupt the delicate balance of soil ecosystems and lead to erosion, loss of topsoil and reduced fertility. Additionally, increased temperatures contribute to soil moisture depletion, reducing water availability for plants and microorganisms and further compromising soil health. A central issue at the interface between soil science and climate change is the role of soil as a carbon sink. Soils store large amounts of carbon in the form of organic material, thereby influencing the environment.

Introduction

Agriculture is the backbone of every country. It largely depends on climate and its changes. Over the last few years climate change has affected crops, cropping systems, patterns and the ecosystem hugely. Climate change is caused by greenhouse gases in the atmosphere, which results in global warming (Aydinalp and Cresser, 2008). The rising temperature, melting of glaciers, loss in vegetation cover, frequent occurrences of drought and floods are some of the issues that have raised concern among the environmentalists. The change in temperature and precipitation patterns alters the traditional growing seasons. Climate change is expected to influence crop and livestock production, hydrologic balances, input supplies and other components of agricultural systems (Adams et. al., 1998). Vulnerability of climate change depends on physical, biological and socio-economic characteristics. Low income populations dependent on isolated agricultural systems are particularly vulnerable to hunger and severe hardship. These populations are already barely food-sufficient, even the slightest decline in yields could be very harmful in these areas. The most negative effects are foreseen in dry land areas at lower latitudes and in arid and semi-arid areas, especially for those reliant on rain fed, non-irrigated agriculture (Aydinalp and Cresser, 2008). The rise in temperature cause stress in crops and reduce yields and productivity. Crops that are sensitive to temperature during the growth stages are affected a lot. A shift in growing season is being seen due change in temperature. Irregular and altered patterns of rainfall are severely affecting the crops and water supplies for livestock, which in turn has increased the occurrence of floods and drought, causing soil erosion, disrupting harvesting schedules. Occurrence of new pests and diseases are seen in the places having warmer temperature. Altered temperature has altered the life cycle of pests and intensity of infestations. Rising of sea water level and increased evaporation leads to intrusion of salt water into fresh water making irrigation water more saline harmful to crops. Livestock are sensitive to heat stresses which in turn reduce livestock productivity and increase mortality rates.

What is mitigation of GHGs emission? We must be clear about the answer of this fundamental question. In simple term, the mitigation of GHGs emission is the way or means by which the emission of those gases could be reduced. As we know from the previous chapters of this book that the GHGs emission could be occurred from natural as well as anthropogenic activities. Natural activities included volcanic eruptions, ocean current fluctuations, continental drifts which are responsible for emission of huge amount of CO₂ and other GHGs. The reduction of emissions from those natural activities is beyond our capabilities. However, the human induced emissions of GHGs emission could be reduced. We studied in previous chapters that fossil fuel burning, industrial and energy sector pollution, deforestation, land use change and agricultural could contribute to GHGs emission considerably. Mitigation techniques are different for each of those sectors that governed by lot of interrelated factors. In actual sense, the mitigation of GHGs emission should includes all the measures that can curtail the anthropogenic emission from all sectors. But that is out of the scope of this book. In this book, we specifically address the mitigation principles, options and efficiency of different techniques/ practices in agriculture only.

In that aspect, the mitigation of greenhouse gases emissions in agriculture is defined as “the means and ways by which emissions of GHGs could be reduced from agriculture”. The ways and means actually referred to the techniques and practices and their amalgamation in agricultural sector both in production, processing and consumption aspects. So, mitigation is not only a techniques or combination of techniques it is actually an integrated approach for reducing greenhouse gases emission from agricultural systems. Primarily, there are two complementary approaches for mitigation of GHGs emissions from agriculture. Those two approaches are (i) supply-side and (ii) demand- side options or pathways. The supply-side approaches includes scientific land- use-changes, improvement of crop management, better livestock management practices, enhancing carbon storage in biota, soil carbon sequestration, significant substitution of fossil fuel by bio-fuels and use of renewable energy in agriculture. On the other hand, demand side approaches, taken in to account of shifting in the dietary pattern from non-vegetarian to vegetarian, curtail down the food loss and waste, and reducing the supply-chains (Figure 6.1). We can see, most of the approaches in supply-side are technology driven, while, approaches in demand-side are socio-economical and or policy driven. In this chapter we would thoroughly discuss the principles of mitigation, options of mitigation, mitigation cum adaptation approaches to reduce GHGs emission and climate change and few strategies to cope up with the vagaries of climate change.

Introduction

Agriculture has historically been the primary source of income in India. It has the potential to alleviate poverty, increase income, and enhances food security for 80% of both the world’s poor and people who reside in rural areas primarily work in agriculture. One of the most effective strategies to eradicate extreme poverty, increase shared prosperity, and feed an estimated 9.7 billion people by 2050 is agricultural development. Compared to other modes, the agro - based sector’s progress is two to four times more successful in enhancing the earnings of the poorest people (www.worldbank.org).

Nearly 5 billion hectares, or 38% of the world’s land surface, is used for agriculture. Around one of this is devoted for farming, and the remaining two thirds are pastures and meadows for grazing animals. Over 10% of cropland is assigned to permanent crops like cocoa plantations, oil palm plantations, and fruit tree orchards. Yet another 21% of land is primed for irrigation, a crucial agricultural land management technique.

During his recent visit, US President Barack Obama pointed out that India is fortunate to have a youthful population with over half the population of 1.2 billion being under the age of 30. Of the 600 million young people, over 60% live in villages. Most are literate. Gandhiji considered the migration of educated youngsters from villages to towns and cities as the most serious form of brain drain adversely affecting rural India’s development. He, therefore, stressed that we should take steps to end the divorce between intellect and labour in rural professions.

The National Commission on Farmers (2004-06) stressed the need for attracting and retaining educated youngsters in farming. The National Policy for Farmers placed before Parliament in November 2007 includes the following goal: “To introduce measures which can help to attract and retain youth in farming and processing of farm products for higher value addition, by making farming intellectually stimulating and economically rewarding”. We are currently deriving very little demographic dividend in agriculture. On the other hand, the pressure of population on land is increasing and the size of the average farm holding is dipping below one hectare. Farmers are getting trapped in debt and, as real estate rates continue to rise, the temptation to sell prime farmland for non-farm purposes is growing. Over 45% of farmers interviewed by the National Sample Survey Organisation want to quit farming.

Pollution is the term used to denote the hindrances caused to living organisms by way of contamination of their physical environment. Pollution to air, water, soil etc. is the major problem faced by the living community. Measures to control the emission of pollution into air, water or soil will certainly reduce the level of pollutants. Mitigation of pollution can be best achieved by combining nature with technology that increases the effectiveness of plants in removing pollution. Use of vegetation is an effective means of pollution control and many researchers have reported their advantages in mitigating pollution.

So far, the main approach has been to dig the polluting chemicals out of the ground and transport them to a landfill. However, after a decade of research, scientists in the early twenty-first century found that hundreds of species of plants, along with the fungi and bacteria that inhabit the ecosystem around their roots, seek out and often break down chemical molecules that can harm most other life.

In the mid-1980s, Dr. B.C. Wolverton and fellow researchers at NASA conducted several studies to determine whether plants could halt indoor pollution and provide a natural way to deal with the problem. It has been suggested by NASA and the Associated Landscape Contractors of America (ALCA) that plants are major pollution-absorbing devices: the common indoor plants might provide a natural way of helping combat “SICK BUILDING SYNDROME”. Common indoor plants may provide a valuable weapon in the fight against rising levels of indoor air pollution. These plants are not only decorative, but are also surprisingly useful in absorbing potentially harmful gases and cleaning the air inside modern buildings.

Fermentation

The term fermentation is loosely used to denote any process in which microorganisms are involved, regards of whether or not the organism is growing in the presence of molecular oxygen. Thus, it can be defined as 'an ATP generating metabolic process in which organic compounds serve both as electron donor (becoming oxidized) and electron acceptor(becoming reduced). Energetically, fermentations are poor energy yielding process and products have lower energy content then the substrates. Since there is no net oxidation in fermentation, the number of molecules of C, H and O remain the same in products as in the substrate.

Introduction In modern agriculture, soft resources like knowledge and skills are sometimes even more crucial than hard resources like inputs. In the 21st century, agriculture has to overcome a number of obstacles, including feeding an expanding population while a declining rural labour force, producing more feedstocks for a huge bioenergy market, supporting the overall development of many developing countries heavily dependent on agriculture, adopting more efficient and sustainable production techniques, and adapting to climate change (Colle, 2011). In order to make efficient and effective agricultural decisions, farmers are increasingly adopting information (Cash, 2001). Compared to the current availability of roughly 0.1 million personnel, the required number of extension agent who worked in field level is anticipated in between 1.3 to 1.5 million.

The mode of action is the overall manner in which a herbicide affects a plant at the tissue or cellular level. The mode of action is the way in which the herbicide controls susceptible plants. It usually describes the biological process or enzyme in the plant that the herbicide interrupts, affecting normal plant growth and development. Herbicide may act on the life process of plant and dislodge the normal functioning of plants resulting in the death of plants. Herbicides  do damage of plants by inhibiting the biological process of plant as follows:

Mode of Action

The term mode of action refers to the sequence of events from absorption into plants to plant death. The mode of action of the herbicide influences how the herbicide is applied. For example, contact herbicides that disrupt cell membranes, such as acifluorfen (Blazer) or paraquat (Gramoxone Extra), need to be applied post emergence to leaf tissue in order to be effective. Seedling growth inhibitors, such as trifluralin (Treflan) and alachlor (Lasso), need to be applied to the soil to effectively control newly germinated seedlings.

To be effective, herbicides must 1) adequately contact plants; 2) be absorbed by plants; 3) move within the plants to the site of action, without being deactivated; and 4) reach toxic levels at the site of action. The application method used, whether pre-plant incorporated, pre-emergence, or postemergence, determines whether the herbicide will contact germinating seedlings, roots, shoots, or leaves of plants.

Mode of Action of Herbicides

Herbicides perform a vital role in the management of weeds. As the name indicates, herbicides are chemicals that kill or control vegetation. Although the ultimate effect of most herbicides is the same (usually death of weed), the way they control weeds is vastly different. Physiologists use the term mode of action to describe the way the herbicides affect weeds. It includes the entire sequence of events that occur from the time the weed absorbs the herbicide to the final plant response (usually death). The term mode of action is the broad term under which all aspects of herbicidal action including the mechanism of action is included, while the mechanism of action refers to only the biochemical and biophysical responses of plants that appeared to be associated with herbicidal action.

Thus, mode of action includes absorption, translocation to an active site, inhibition of a specific biochemical reaction, degradation or breakdown of the herbicide in the plant and soil and the effect of the herbicide on plant growth and physiology.

Although two herbicides may differ chemically, they may still possess the same mode of action example trifluralin (a dinitroaniles herbicide) and propanamide (an amide herbicide) are inhibitors of microtubule/spindle apparatus. Each herbicide family (class or group) has a primary site of action which may be different in its action from others example sulfonylureas herbicides are ALS or AHAS inhibitors while glyphosate and sulfosate are ESPS inhibitors. Some may have more than one site of action, but the mostinhibitory of these will be affected first. The other site(s) may be considered secondary. Fluometuron, a urea group herbicides act by inhibiting photosynthesis at photosystem II and carotenoid biosynthesis.

Rivers are the most important system for water, for irrigation and human settlement. Historically, civilizations always nucleated near rivers, and latter also had social and religious significance. Rivers in India are considered holy and play the most important part in the lives of people, fauna & flora and the future environmental system.

The Ganga Basin is the largest river basin in India which includes the Ganga, the Yamuna, the Ghagra, the Gandak, the Kaveri basin etc. Compared to these, the Vishwamitri River, situated between Mahi River in North and Narmada River in South in Central Gujarat is a small seasonal river but it is very important for the city of Vadodara and Central Gujarat region. This seasonal river originates from Pavagadh hills and flows east to west. It is a typical small river with the kind of problems in most rivers in India and other countries – liquid and solid wastes, enouncements, blocking of water ways, floods in monsoon months and dry dumping basin during most other months etc.