eChapters

Tourism is a phenomenon, which has taken off immensely in the past three decades. It concerns us all, be it by allowing us to travel long distances as tourists, or by forcing upon us a mass of visitors to our part of the world. In the past, people did not travel half as much. Financial obstacles and responsibilities to land and animals stopped them from doing so. Only in 1845 did Thomas Cook of Leicester, England, organize the first package tour, making this experience available to people outside of the privileged classes by cutting down on expenses. By 1939, an estimated one million people were traveling abroad each year. Nowadays, the population of the Mediterranean swells to double over the summer, from 130 million resident inhabitants during the winter to 260 million in high season. There were about 698 million international tourist arrivals worldwide in 2000. All regions in the world grew, and the fastest developing region continued to be East Asia and the Pacific. Tourism has become the largest industry in the world. And just like all thriving industries, though it has a lot to give, it also takes a lot in turn. Unfortunately, the toll that we pay for it has been rising steadily. While the prospect of people traveling less in the future seems improbable, to say the least, a new idea has already sprung up: If we cannot stop tourism, let us at least travel sensibly.

Green business, is enterprise that has no negative impact on the global or local environment, community, society, or economy—a business that strives to meet the triple bottom line. Often, sustainable businesses have progressive environmental and human rights policies. In general, business is described as green if it matches the following four criteria:

1. It incorporates principles of sustainability into each of its business decisions.

2. It supplies environmentally friendly products or services that replace demand for non-green products and/or services.

3. It is greener than traditional competition.

4. It has made an enduring commitment to environmental principles in its business operations.

A sustainable business is any organization that participates in environmentally friendly or green activities to ensure that all processes, products, and manufacturing activities adequately address current environmental concerns while maintaining a profit. In other words, it is a business that “meets the needs of the present world without compromising the ability of the future generations to meet their own needs.” It is the process of assessing how to design products that will take advantage of the current environmental situation and how well a company’s products perform with renewable resources.

3.1. SOLID WASTE MANAGEMENT

Solid waste management includes the transportation, processing, recycling and disposal of our waste materials. We live in a disposable world in many ways with the modernization and convenience of our world we have cluttered it with our refuse.

Sustainability has recently become an important factor in the engineering world. Landscape architecture is a discipline that attempts to improve the way humans interact with the environment. That interaction can be improved in various ways such as water conservation, energy conservation, or urban planning. landscape architecture encompasses urban design, community and regional planning, interior and exterior garden design, parks and recreation, historic site and natural area preservation, energy and water conservation, landscape restoration and management, among others. The varied list is an example of the dynamic essence of landscaping and provides insight into the many areas which can be improved by implementing sustainable practices.

Sustainable development practices aim to protect the quality of life of future generations. This can only be done by understanding how the natural environment operates as well as how human interactions affect it. Sustainable Landscape Architecture focuses on enhancing the holistic knowledge of the surrounding landscapes, including the complex processes which naturally occur to maintain it. Employing this knowledge within the planning phases of development should result in the reduction of negative environmental impacts due to the same. The traditional consequences of land development can be eliminated or mitigated when developers are able to foresee the consequences of their work. Many times, replicating undeveloped conditions and/or native landscapes within the overall site design will prove very useful in achieving the goals of sustainability. All of the sustainable topics covered in this chapter involve the application of a technology that resulted from better understanding the natural environment.

Green energy can be classified as any form of energy resource that results in zero greenhouse gas emissions and zero toxic byproducts. These constitute the alternate source of energy such as Solar, Bio, Hydrogen, Wind, Water etc. Renewable Energy is energy that is not depleted or expen- ded. Previously the pressure to reduce CO2 emissions dictated the energy sourcing. With recent findings from experimental evidence, global warming may not be attributable to CO₂ emissions in relation to other over-weighing causes. However the pressures to develop renewable sources continue since the cost of Oil is increasing in many countries. It is desirable and a necessity to develop renewable non-toxic energy resources. The global economy and welfare of all earth depends on it even if CO₂ is not the cause of global warming (GW). There are some factors not in the control of even the most technologically advanced society. These are solar activity such as sun spots which have huge and tremendous influence on the Earth’s climate. However we should strive not to cause any undue imbalances in the proportion matter and composition of Earth’s atmosphere. Although CO2 is a small contributor to GW in comparison to H₂O, we still have responsibility to maintain the right balance of the gases in the atmosphere by not causing undue changes to the Carbon, Nitrogen and Oxygen cycles! We are far way off from a Oil-free technology. Most transportation is still petrol driven.

Introduction

Globally, the SOC pool of 1,550 Pg (1 Pg = 1015 g) to 1-m depth is about three times that of biotic and twice that of atmospheric pools (Post et al. 1982, Watson et al. 2000). In arid and semi-arid ecosystems, SOC contents show high degree of spatial variability due to patchiness of vegetation (Wiesmeier et al. 2009). The arid ecosystem might play a key role in mitigation of climate change effects through sequestering carbon in soils (United Nations 2011). Therefore, a suitable land use system having high C sequestration potential for arid ecosystem needs to be identified and promoted. However, the prevailing conditions of arid ecosystems normally does not support dense vegetation. Therefore, low carbon stock is expected in both above-ground vegetation and below-ground soil. Fruit trees are an integral part of arid farming system and played a significant role to improve the nutritional security and employment opportunity of farmers but also have potential role to increase carbon storage both in biomass and soil. To quickly assess the soil carbon restoration programmes, it is important to know how much soil carbon is stored in an agricultural farm through adoption of different land management practices. Therefore, reliable estimates of SOC pools are essential to establish the soil carbon sequestration programmes at different landscape scales.

Introduction

Soil organic carbon (SOC) content plays a key role in maintaining soil fertility in agricultural farm. At present, there has been great interest to reduce the atmospheric CO₂ level through a chain of increasing vegetation carbon pools first and then to store them as soil carbon pool. To quickly assess the soil carbon restoration programmes, it is important to know how much soil carbon is stored in an agricultural farm through adoption of different land management practices. Average SOC content is considered in most soil carbon pool calculations in spite of its large spatial variation in landscape, and thus leads to inaccurate estimate of SOC stock for an area. Therefore, reliable estimates of SOC pools and their spatial variability are essential to establish the soil carbon sequestration programmes at different landscape scales. Here, a case example of assessing the spatial variation at a typical agricultural farm is discussed. The experimental field was located at Badoda village of Jaisalmer district, Rajasthan covering an area of about 76.12 ha. The farm lies between 265^o2′30″-26°53′30″ N and 71°12′15″-71°13′15″ E (Fig. 24.1) and 20 km away from Jaisalmer city in eastward direction. Elevation of the farm ranged from 232 m to 248 m above mean sea level with an overall slope from south to north. Among total area of the farm, 85.38% area was under cultivation in four main blocks: block A, B, C, and D whereas rest area was under grassland.

Introduction

High degree of spatial variability in soil properties is observed at different scales. This variability is generally originated from the combined effect of physical, chemical or biological processes operating with different intensities at different scales (Goovaerts 1998). Knowledge of this spatial variationof soil properties is important in several land management applications e.g. variable rate application of nutrient and water in agricultural production system, land suitability classifications, modeling water balance components at landscape scales, precision farming etc. The concept of ‘management zone’ was also evolved in response to this large variability with the main purpose in efficient utilization of agricultural inputs with respect to spatial variation of soils and its properties (Franzluebbers et al. 1996, Atherton et al. 1999, Malhi et al. 2001). Therefore, an appropriate understanding of spatial variation of soil properties is essential. The most important way to gather knowledge in this aspect is to prepare soil maps through spatial interpolation of point-based measurements of soil properties. Here, a case study is discussed where soil water retention at two critical levels e.g. field capacity (FC) and permanent wilting point (PWP) was spatially characterized through geostatistical approaches. Because these two soil moisture contents guide farmers to apply right amount of irrigation water at right time. The study was carried out at the experimental farm of ICAR-Indian Agricultural Research Institute, New Delhi, India (28°37′-28°39′ N, 77°8′ 30″-77°10′30″ E, 217-241 m above mean sea level). A detailed discussion of the study is available in Santra et al. (2008)

Introduction

Microorganisms generally present in all the environments are the most abundant and diverse living organisms present on earth. Microorganisms have great impact on the biosphere due to their inbuilt ability to transform the key elements of life into forms usable by other organisms and plants. Because of heterogeneity in nature of soils from variations in physical, chemical and biological properties the various natural habitat are microbially most diverse environments on the earth maintaining the stability between complex microbial communities and their function (Daniel 2005). One gram of soil contains about 10 billion microorganisms of possibly thousands of different species but microbial diversity in general, and particularly in extreme environments, and its role in ecology is poorly understood (Rossello-Mora and Amann 2001).

Deserts present a unique environment with very little precipitation and large variations in day and night temperatures, making it inhospitable environment for living organisms. Still a number of microbial species do survive in those harsh environments. The populations of aerobic bacteria in deserts across the world are reported to vary from < 10 in Atacama desert to 1.6 × 10⁷ cfu g^–1 in soils of Nevada (Skujnis 1984), and India is not exception to that with the bacterial population in the range of 1.0 × 10³ to 8.35 × 10⁶ cfu g^–1 sediment or ml^–1 water in the samples collected from cold deserts of north western Himalayas (Yadav et al. 2015).

Introduction

The life support systems of a country and socioeconomic development of its people largely depend on soils. The soils are the most valuable natural resources for the society. It caters the basic needs of mankind by producing food, fibre and timber. It is therefore essential to know the distribution and extent of different soils and their qualities, potentialities and constraints for sustainable utilization of this valuable natural resource (Shyampura and Sehgal 1995). Information on distribution, potential and constraints of major forest soils are essential to design most appropriate soil management systems in order to increase productivity of forests as forests also offer excellent potential for poverty reduction and rural economic growth in India. However, unlike agriculture lands forest soils usually draw less attention and are ignored in spite of the fact that they nourish the lungs of the Earth. Soil quality is the most important factor in forest management decisions. Soils will determine productivity of a particular forest and management strategy. Knowing about forest soils can serve as a basis for forest management decisions, including land acquisition, species selection for planting, site preparation requirements, watershed development, fertilization prescriptions, stand density/ composition, and harvest timing, as well as decisions affecting land ownership and use.

Introduction

The natural resources of arid regions particularly soil and water are limited and is often in a delicate environmental balance. Desert encroachment due to lack of conservation planning, and the dangers of destroying or depleting beyond recovery these productive resources, are evident at present time and may be disastrous if development is based on short term expediency rather than long term stability.

The arid zone of India is spread over 38.7 million ha area, out of which 31.7 m ha in under hot arid region and 7 m ha under cold region. The hot arid region occupies major part of north-western India (28.57 m ha) and occurs in small pockets (3.13 m ha) in south India. The north-western arid region occurs between 22o30' and 32o05' N latitudes and from 68o05' to 75o45' E longitudes, covering western part of Rajasthan (19.6 m ha, 69%), north-western Gujarat (6.22 m ha, 21%) and 2.75 m ha (10%) in south-western part of Haryana and Punjab (Faroda et al. 1999). Rainfall distribution is highly uneven over space and time (CV>60%). The region receives low rainfall (<100 mm to 500 mm), has high evapotranspiration and high temperature regime (Rao and Singh 1998). Groundwater is deep and often brackish. The western-central area is devoid of drainage system and surface water resources are meager (Fig. 20.1). Due to low and erratic rainfall, replenishment of water resources is also very poor. The entire Rajasthan state is being categorized as the driest state and water scarce (having per capita water availability below 1000 m3 year-1) since 1991 in the country. Increasing pollution by industrial units, big and small, unregulated mining and even over-extraction of water from deep wells also add to the water quality problem in number of districts. Rapid urbanization and industrialization make such existing differences even more

Introduction

Soil is a dynamic natural body, characterized by high degree of spatial variability due to combined effect of physical, chemical or biological processes that operate with different intensities at different scales (Goovaerts 1998). Reports have shown that there is large variability in soil properties, crop yield, disease, weed etc., not only in large-sized fields (Godwin and Miller 2003,Vrindts et al. 2005), but also in small-sized fields (Bhattacharya et al. 2008). Therefore, knowledge of hydro-physical properties of soils is crucial for management practices for all kinds of agricultural practices for efficient utilization of input resources. Plant growth and development is highly related to soil hydro-physical properties, which not only depend on soil intrinsic textural and chemical characteristics (Hamza and Anderson 2005) but also on soil management.

Soil physical properties which change with the variation in soil structure include bulk density, total porosity, pore geometry (size distribution, shape, continuity and tortuosity), penetration resistance and aggregate stability, consequently affecting soil hydraulic properties such as water retention characteristics, plant available water capacity, infiltration capacity and saturated hydraulic conductivity. These soil properties are dependent on seasonal climatic conditions, management practices, crop development and biological activity (Reynolds et al. 2007). The hydro-physical properties of soils, i.e., water retention and water permeability in both saturated and unsaturated zones not only shape soil water balance but also decide the conditions for plant growth, development and yield. They also determine water availability for the plant root system and the transfer of water with chemical compounds dissolved in it into deeper layers.

Land resources units or major land resources units are the suitable segmentations of land, based on available natural resources, their potential use and management. Irrespective of terms used by different organizations or institutes, these units have spatial dimension and represent a composite unit for interstate, regional, and national level planning. A typical meaning of these land units can be related to terms like land system. Christian and Stewart (1953) of the Commonwealth Scientific and Industrial Research Organization (CSIRO), Australia devised the ‘Land system’ as the composite mapping-unit which has been defined as “an area or group of areas, throughout which there is a recurring pattern of topography, soils and vegetation”. This system is based on the premise that the land system is expressed on aerial photographs by a distinctive pattern and, as such, the land system can be directly mapped from aerial photographs (Christian and Stewart 1953, Mabbutt and McAlpine 1965). It is a fact that during those period, aerial photographs were more frequently used and studies related to land systems used technique of aerial photogrammetry. As per USDA (United States Developmental Agency), the typical segmentations are; (1) Land Resource Region (LRR), which is the highest level in the hierarchy (2) Major Land Resource Area (MLRA), the second highest level and generally representing broad landforms or a geologic region at a small scale and (3) the Land Resource Unit (LRU).

Concept and Definition

Desertification is a major problem in the drylands of India, affecting the way of life for its inhabitants. The problem is more severe in the arid lands in the northwestern part of the country. There have been a few numbers of definitions of the word “Desertification”. However for simplicity of its origin and meaning we would refer to two of the frequently used ones; (1) proposed in 1991 by UNEP: “Land degradation in arid, semi-arid and dry sub-humid areas resulting mainly from adverse human impact and (2) prepared for the Earth Summit at Rio, held in June 1992, for inclusion in Agenda 21, as “Land degradation in arid, semi-arid and dry sub-humid areas resulting from climatic variations and human activities. (Anonymous 1992).

Comparing two of these initial definitions, it would show that first one indicated desertification as a state of natural resources like soil and vegetation, mainly resulting from human activity while the second one included climate as a major cause. However, it reduced the emphasis of human activities as being the primary responsible factor and tried to link the possible impact of climate change on desertification. But the simplicity of the 1992 definition of desertification helped researchers to bring in sharp focus on the special environmental and socio-economic problems of the drylands.

So over the years, the key words that explains the term “desertification” has been changing or are being amended for specific purposes. This would at least mean that the problem of desertification is still debated world-wide, and its impact is not limited to some nations/regions as was presumed and discussed in first of UNCCD platforms. Therefore, as a precaution and combating this process, few catchy words like non-sustainable management, productivity, over-exploitation of natural resources, dryland livelihood, droughts are found to surround the word desertification. Earlier, some, people equated desertification with advancing boundaries of the existing desert and in India, examples of expansion / contraction of geographical boundary of Thar desert was a public debate among various researchers and planners. In the same time, some of the definitions tried to broaden its geographical scope so that greater populations suffering from adverse effects of land degradation would benefit out of various remedial measures.

Introduction

In India, hot arid ecosystem covering an area of 31.7 million ha lies at north western part of the country and 62% of this area falls in western Rajasthan covering 12 districts i.e. Jodhpur, Jaisalmer, Jhunjhunu, Sikar, Hanumangarh, Sri Ganganagar, Bikaner, Barmer, Pali and Sirohi. The major landforms in arid western Rajasthan are dune and inter-dune plains having sandy to sandy-loam textured soils. Temperature remains high for most part of the year reaching up to 42-45°C during prolonged summer months (April to July), whereas annual rainfall is very low and highly sporadic (100-400 mm) mainly occurs during August and September. Annual potential evapotranspiration ranges from 1500-2000 mm. Loss of fertile top soil from denuded soil surface through wind erosion is frequent during summer months. The region is subjected to frequent occurrence of droughts, once in every three years, which further intensifies the process of desertification (Samra et al. 2006). Shorter growing period, sandy soils, very low available water capacity, inadequate nitrogen and phosphorus availability are the major constraints. Soils are prone to severe wind erosion, terrain deformation and nutrient depletion. The region is mostly mono cropped and double cropping is being practiced extensively in canal and tubes well command area. Extensive fallowing in the past even in very good rainfall years because of uneven undulating topography and severe windstorm are the cause of concern. Ground water is deep and is usually brackish, declining at alarming rate due to excessive withdrawal for irrigation and other purposes. The region, however, sustains on perennial vegetation of Prosopis cineraria, Tecomella undulata, arid shrubs and grasses, which are rich resources of fodder for animal because cropping is affected by vagaries of monsoon. During last two to three decades, a 2 to 3-fold increase in irrigated areas with cultivation of both kharif and rabi crops has been recorded and most of these increments are resulted through conversions from rainfed areas, grazing lands and sand dunes into irrigated areas.

Introduction

Over the past few decades, soil resources have witnessed many changes driven by demographic pressure and climate change. It is necessary to have up to date soil information to monitor the state of soils health with time. Soil resource inventory provides information about the potentialities and limitation of soils for its proper utilization. Soil survey offers an accurate and scientific inventory of different soils, their properties and extent. An in-depth knowledge of the type of soils and their spatial distribution is a prerequisite for developing rational land use planning. Remote sensing is the science of obtaining information about the earth’s surface without actually being in contact with it. On the other hand, proximal sensing refers to remotely sensed measurements that are taken at the field or laboratory level. Both these processes involve an interaction between incident radiation and the targets of interest. Fundamentally, remote sensing data products are a representation of the functional response of objects to energy sources. These are typically spectra, which are acquired as a discrete series of reflectance measurements taken at different wavelength intervals, or bands. In the shorter wavelengths of the electromagnetic spectrum (visible part), features can be detected by virtue of reflected solar energy, while in the longer wavelengths (microwave, thermal parts), sensing of emitted energy works. Conventional soil sampling, and subsequent laboratory analysis are generally time consuming and costly. In this context, remote sensing plays a crucial role for studying soil resources. The term remote sensing is generally used for airborne and space borne acquisitions, whereas proximal sensing refers to ground-based laboratory and field measurements. Advances in the quantitative disciplines like remote sensing and proximal sensing have laid the foundations for a spatial exploration of soil-system dynamics within a landscape context (Pennock and Veldkamp 2006).

Introduction

Soil is one of the vital resource, and is the basis of the existence of mankind. Management of this resource including its conservation and utilization is of crucial importance. It is a base on which all life depends. In the recent past, with burgeoning populations and the national goals of seeking self-sufficiency in food and fibre production, this resource base is slowly being stripped. While natural systems often adapt to stress in a remarkable fashion, some relationships - once destroyed - can never be restored. Soil resources can be assessed and monitored through its spectral signatures gathered through remote sensing.

The term ‘remote sensing’ is commonly restricted to methods that employ electromagnetic energy (such as lights, heat, micro wave) as means of detecting and measuring target characteristics. Sensors acquire data as various earth surface features reflect or e mit electromagnetic energy (EM energy). Remote sensing is the technology that is now the principal method (tool) by which the earth’s surface and atmosphere (as targets or objects of surveillance) are being observed, measured, and interpreted from vantage points. Remote sensing of the earth traditionally has used reflected energy in the visible and infrared, and emitted energy in the thermal infrared and microwave regions to gather radiation that can be analyzed numerically or used to generate images whose tonal variations represent different intensities of photons associated with a range of wavelengths that are received at the sensor.

Introduction

Accuracy and uncertainty analysis is an important step in preparation of surface map through geostatistical techniques or digital soil mapping approach. It is because that we rely on a map based on how much accurate it is and the degree of uncertainty associated with the estimates while the map was prepared. Any stakeholder for a soil map especially policy makers is interested in accuracy and uncertainty of the map before taking suitable land management decisions involving soil map as an input. Again the level of accuracy and uncertainty depends on the properties for which the map has been developed. If the property of interest is sensitive to environment or human consumption, then the accuracy level should be very high while the uncertainty level should be very low e.g. heavy metal concentration in soil, quality parameters of water etc.

Introduction

GIS (Geographical Information System) based mapping takes cogence of three major geometrical dimensions, point, line and polygons and in GIS these three features correlate their relationship through a concept called Topology. Among the various applications where covariate processing requires specific attention, the landuse/ land cover and Digital Elevation Models/surfaces or terrains are the major area of interest. Use and processing of data for these covariates carries importance as accuracy of both these aspects would influence the derivatives extracted out of them further. For example, if landuse is improperly defined, the site for which planning is proposed may not sustain, similarly, point data/elevation data in case of DEMs would decide the exact topography of any landforms for their further utilization. For their use in GIS, while DEMs depend upon point data, the landuse/ land cover will be taken care by polygons. For the purpose of the study, we are going to discuss about these two covariates in the following paragraphs.

Generally, Covariate (covariable) (koh-vair-iãt) in statistics is defined as a continuous variable that is not part of the main experimental manipulation but has an effect on the dependent variable. In other words, as per ANCOVA (Analysis of covariance) definition: a covariate is a control variable.

Introduction

Quantum Geographical Information System (QGIS) is an open source GIS environment. The software package is available freely in web https://www.qgis.org/en/site/forusers/download.html) and can be installed in a variety of computer platform e.g. Windows, Linux, Mac OS X, Android etc. Latest information on QGIS is available inhttp://www.qgis.org/en/site/. Basically, the QGIS GUI is divided into five areas: (i) Menu Bar, (ii) Tool Bar (iii) Map Legend, (iv) Map View and (v) Status Bar. QGIS allows users to define a global and project-wise coordinate reference system (CRS) for layers without a pre-defined CRS. It also allows the user to define custom coordinate reference systems and supports on-the-fly (OTF) projection of vector and raster layers. All of these features allow the user to display layers with different CRSs and have them overlay properly. QGIS has support for approximately 2,700 known CRSs. Definitions for each CRS are stored in a SQLite database that is installed with QGIS. The CRSs available in QGIS are based on those defined by the European Petroleum Search Group (EPSG) and the Institute Geographique National de France (IGNF) and are largely abstracted from the spatial reference tables used in Geospatial Data Abstraction Library (GDAL). For Post GIS layers, QGIS use the spatial reference identifier that was specified when the layer was created. For data supported by OGR, QGIS relies on the presence of a recognized means of specifying the CRS. In the following sections, few basic GIS analysis using example spatial data from arid western India is discussed. However, readers are advised to go through different tools and functions available in QGIS after installation of the system in personal computers.

Introduction

Spatial datasets always exhibit two common features (i) the occurrence of a few very large concentrations (hot-spots) and (ii) the presence of data below the detection limit (black spots). Extreme values can strongly affect the characterization of spatial patterns, and subsequently the prediction. Several approaches exist to handle strongly positively skewed histograms (Saito and Goovaerts 2000). One common approach is to first transform the data (e.g. normal, Box Cox or lognormal), perform the analysis in the transformed space, and back-transform the resulting estimates. Such transform, however, does not solve problems created by the presence of numerous black spot data, since either it yields a spike of similar transformed values or, in the case of the normal-score transform, it requires a necessarily subjective ordering of all equally-valued observations. Moreover, except for the normal score transform (Deutsch and Journel 1998), it does not guarantee the normality of the transformed histogram, which is required to compute confidence intervals for the estimates. Last, the back-transform of estimated moments is not straightforward and can introduce bias if not done properly (Saito and Goovaerts 2000); for example, lognormal kriging estimates cannot simply be exponentiated. Another way to attenuate the impact of extreme values is to use more robust statistics and estimators. The non-parametric approach of indicator kriging (IK) falls within that category (Journel 1983, Goovaerts 2001). The basic idea is to discretize the range of variation of the environmental attribute by a set of thresholds (e.g. deciles of sample histogram, detection limit, regulatory threshold) and to transform each observation into a vector of indicators of non-exceedence of each threshold. Kriging is then applied to the set of indicators and estimated values are assembled to form a conditional cumulative distribution function (ccdf). The mean or median of the probability distribution can be used as an estimate of the concentration of the material in question (Barabas et al. 2001, Cattle et al. 2002, Goovaerts et al. 2005).

Introduction

In geographical location, the observations taken in proximity tend to be more alike than observations made at points that are far apart-that is, the values tend to be correlated. An area of study that takes this sort of spatial consideration into account is called geostatistics. A primary motivation for sampling is to make meaningful estimates of values at nearby positions in space and time. When values are assumed independent, the best estimate for an unmeasured point will be the mean. However, for correlated values nearby values are estimated by interpolation. The simplest interpolation scheme is a nearest neighbor estimate for which the unknown values are based on the closest measured location. Inverse distance is another sort of interpolation technique where weights are estimated based on the inverse distance squared. Kriging is a geostatistical interpolation technique that considers both the distance and the degree of variation between known data points when estimating values in unknown areas.

It makes the best use of existing knowledge by taking account of the way that a property varies in space through the variogram model. In its original formulation a kriged estimate at a place was simply a linear sum or weighted average of the data in its neighbourhood. Weights are based on the distance between the measured points, the prediction locations, and the overall spatial arrangement among the measured points. Since then kriging has been elaborated to tackle increasingly complex problems in mining, petroleum engineering, pollution control and abatement, and public health. The term is now generic, embracing several distinct kinds of kriging, both linear and non-linear.

Introduction

Spatial variation structure of soil properties is a key input for digital soil mapping and generally determined through geostatistical techniques (Webster and Oliver 2007). In geostatistics, spatial variation is expressed by semivariogram ?(h) , which measures the average dissimilarity between data separated by a vector h. It is generally computed as half of the average squared difference between the components of data pairs:

Introduction

The first step of geostatistical analysis in R is the creation of dataset which is acceptable in R environment by using the data collected from field survey or laboratory experiments. Different type of data is collected during experiments e.g. sand content, silt content, organic carbon content, geographical location of data points, soil type, land use type etc. Here, we will discuss how these data are converted into a acceptable dataset format for R environment and how we manage these data. In R this task is performed in two steps. First, a data structure is created to hold the data and second is the entering or exporting the data into data structure.

Introduction

Spatial data is different from a non-spatial data in the sense that it always has a spatial reference system which is nothing but a pair of coordinate values and a system of reference for these coordinates. For example, the locations of benchmark soil series of India can be defined as pairs of longitude and latitude in decimal degree values with respect to the prime meridian at Greenwich and zero latitude at the equator. The World Geodetic System (WGS84) is a frequently used system of reference on the Earth. The different types of spatial data are: (i) point, which is a single point location, such as a GPS reading or a geocoded address (ii) line, which is defined as a set of ordered points, connected by straight line segments (iii) polygon, an area, marked by one or more enclosing lines, possibly containing holes and (iv) grid, a collection of points or rectangular cells, organised in a regular lattice. Among the above said spatial data, the first three are vector data models and represent entities as exactly as possible, while the fourth data model is a raster data model, representing continuous surfaces by using a regular tessellation. In this chapter, we discuss how a spatial data can be handled in R. There are several packages available in R in which spatial data analysis can be handled e.g. sp, rgdal, raster etc. All the contributed packages for spatial data analysis in R address two broad areas: moving spatial data into and out of R, and analysing spatial data in R. In the following section, the sp package for spatial data handling is briefly discussed.

Introduction

R is one of the most popular platforms for data analysis and visualization currently available. It is free, open-source software, with versions for Windows, Mac OS X, and Linux operating systems. R is a language and environment for statistical computing and graphics, similar to the S language originally developed at Bell Labs. It’s an open source solution to data analysis that’s supported by a large and active worldwide research community. But there are many popular statistical and graphing packages available e.g. Microsoft Excel, SAS, IBM SPSS, Stata, and Minitab etc., however R has many interesting features so why it is mostly followed by researchers and academicians. Few of the major features of R are given below:

Soil sampling is an integral and essential component of soil fertility evaluation and nutrient management research. The effectiveness of soil sampling is a prerequisite for soil testing to achieve its goals for efficient nutrient management and plant nutrition for improved yield and quality. The underlying basis for soil sampling is that a soil sample taken represents the “population” which may be a plot, field or a watershed. It further implies that nutrient status of the representative soil sample(s) determined in a laboratory would reflect nutrient status of a plot, field or watershed and is of interest for correcting nutrient disorders in the field or watershed.

The most important factor that influences the effectiveness of soil sampling is soil heterogeneity. However, in a relatively homogenous group of fields or plots, a small number of samples may be sufficient to represent the population to a more heterogenous group of fields that would require more number of samples to represent the soil population. Whenever, soil samples to be taken in field following points needs to be kept in mind.

The arid region in India is spread over in 38.7 million hectare land. Out of the total 31.7 m hectare lies in hot arid region and remaining 7 m hectare comes under cold arid region. The hot arid region occupies major part of northwestern India (28.7 m ha) and a small pocket (3.13 mha) in southern India. The north western arid region occurs between 22°30’ and 32°05’ N latitude and 68°05’ to 75°45’ E, covering western part of Rajasthan, north western Gujarat and south western parts of Haryana and Punjab. About 62% area of arid region falls in western Rajasthan and 20% in Gujarat. Haryana and Punjab together constitute 7% area of arid region. The state wise distribution of arid region is shown in Table 3.1. Further our discussion is based on the majority area of arid region, belonging to Rajasthan, Gujarat, Punjab and Haryana.

Introduction

A complex spatial soil properties pattern is directly controlled by soil internal factors and anthropogenic impacts.Hartemink et al. (2001) elaborate a strong decline in mineralogy, morphology and genesis of soil research than strong increase in pedometrics applications during 1967 to 2001. Hartemink and McBratney (2008) identified this change as “soil science renaissance”. Basically, the soil science deeply rooted in agriculture, geology, and chemistry but the paradigm has been shifted from classification and inventorization to quantification of soil patterns in spatial as well as temporal patterns and their impact on the ecosystem health and hydrological cycle. The environmental keen approach explains that soil is in the center of the ecosystem and highly interacting with the biotic and abiotic factors of the ecosystem and a complex pattern and process has been co-evolved with the time.

Introduction

Geostatistics is a branch of statistics that deals with the analysis and modelling of geo-referenced data. Its main aims are to quantify spatial variability and to create maps from point observations. Of course there is much more to geostatistics than just that and indeed some of the other uses of geostatistics are addressed in this chapter too, but the emphasis is on the assessment of spatial variability and geostatistical interpolation.

The first step of geostatistical interpolation is to quantify the spatial correlation structure of the variable of interest. This can be done by examining the observations and how these vary in space. Next spatial interpolation makes use of the quantified spatial correlation to derive optimal predictions at unobserved locations and create a map. The interpolation error is quantified as well, which helps to design optimal spatial sampling schemes that balance data collection costs and map accuracy. All this will be explained in this chapter, but in order to do so we first need to explain the statistical theory that underlies geostatistical interpolation followed by representation of the spatial correlation structure, the basics of geostatistical interpolation (‘kriging’), kriging extensions and spatial stochastic simulation.

The study entitled “sustainability of small farms in coastal ecosystem” was conceived out of consideration of continuous degradation of natural resources- base consisting of soil, water, forest, maintain and animal wealth of the state. With broad objective of investigation into the status of sustainability of agriculture in the state, the specific analysis like socio-economic and farming related situations, perception about sustainability of agriculture in terms of ecological soundness, economic viability, social accessibility, humaneness and adaptability, development of sustainable agriculture index, adoption of sustainable measures, extension components and suggestions and strategy to maintain sustainability were taken into consideration. The organic farming and agri-business opportunities for sustainable agriculture were also studied.

The study was conducted in the state of Odisha covering the districts of Puri, Khurda, Ganjam and Balasore. Altogether four blocks each of one district and eight villages two from each block were selected for the purpose of the study. As much as 200 respondents who were within definition of small and marginal farmers were selected for interview. The respondents randomly so selected were personally interviewed by the author through an interview schedule developed on the basis of objectives stated earlier. The secured data were processed statistically to reveal the relevant findings as per the need of the study. From the relevant findings of the study the conclusions have been summarized below.

The factors affecting sustainability of agriculture under small farm production system in coastal ecosystem of Odisha was studied to ascertain the status of ecological factors and suggest means and ways to improve the situation. The response of the sample farmers and the findings of the study together led to suggest the following measures for up-gradation of ecosystem of the coastal area leading to sustainability of agriculture. Like other states, Odisha is also facing with problems of sustainability of agriculture. Our sample districts namely Puri, Khurda, Ganjam and Balasore which are situated in coastal eco-system of the state has different problems concerning to natural resources like soil, water, forest and animal wealth, etc.

The suggestions to improve the sustainability status of agriculture have been viewed from two important angles. One is adoption of technological measures to preserve natural resources and other is the policy and extension approach to educate people about the necessity of taking such measures for sustainability of agriculture and improve upon.

Transfer of technology is closely associated with generation of technology and its use leading to development. Extension components contain stimulating inputs that would mobilize the practitioners to put recommendations into action. Sustainability in agriculture is very important component of present day agriculture and future aspirations. Keeping these aspects in view an attempt was made to enlist suggestions under extension approaches that would enhance sustainability in agriculture in the area under study. The suggestive extension measures to enhance sustainability in agriculture were studied under components of social structure, cooperation mechanism, evaluation technique and marketing network.

At present producers and consumers are concerned about products and their uses. In farm sector agribusiness is gaining momentum because of marketing of farm produce and its availability to the consumers at affordable rate. Agribusiness thus has been identified as important element in improving farm business. The farm business is otherwise known as agribusiness. Agribusiness is an off farm activity mainly concerned with processing and marketing. It implies that in addition to production of farm produce farmers responsibility increases to process the out-put and its sale in the market for better price. The farmers like to approach different organizations, corporation and regulated markets. Therefore attempt has been made at government level to encourage cultivators to invest in the farm business. In order to increase the efficiency of farmers there is need of keeping the business flexible encouraging farmers to invest in farm and allied sector business.

8.1. Ecological Soundness

Conservation of natural resources essentially means maintenance and improvement of ecological status and not permitting them for further degradation. The natural resources are soil, water, forest, mountain and animal resources. An attempt was made to find out whether the respondents adopt certain recommendations for preservation of these natural resources irrespective of source of advice.

i. Soil Health

Soil is considered as an important ingredient of ecological soundness of an area. Adoption of soil health measures, like adding of organic manures, following of crop rotations, use of balanced chemical fertilizers, green manure and bio- fertilizers are some of the recommendations to maintain soil health. While examining the adoption of these measures, the following results were obtained.

7.1. Sustainability in Agriculture

Sustainability essentially means meeting the needs of present generation without compromising the ability of future generation to meet their own needs. The concept used by FAO to convey the meaning of sustainability necessarily rely on management and conservation of resource base in relation to orientation of technological and institutional changes to ensure satisfaction in meeting human needs. Sustainability normally covers the meaning of conservation of natural resources. The natural resources are land, water, forest and livestock. The maintenance of these resources suffers due to low or no maintenance because of absence of infrastructure and inadequate finance. Apart from these constraints, poor management ability is also responsible for degradation of natural resources. To equip the people, in general, poor managerial ability has to be upgraded through multidisciplinary program, appropriate technology and establishment of peoples’ organizations. To work on sustainability as defined for maintenance and conservation, the people in general ought to develop a positive perception to work before the program is initiated. The perception directs action of individual in a positive manner. Therefore, it is necessary to determine the perception of people about the concept of sustainability, particularly in the field of agriculture.

Organic farm produce is now gaining momentum in the world. People of high status and concerned with health hazards are interested in organic product. Since 1990, the market of organic product has grown reaching a value of Rs 55 billion in 2009 as per the Organic Monitor in the world. The demand has been reflected in increase of land under organic farming which has grown correspondingly at a rate of 8.9% per annum. At present there is approximately 37,000,000 hectare of land under organic farming worldwide. The idea has been percolated to rural areas and the farmers of all kinds are aware of organic farming. In terms of organic land, Australia leads the pack with 11.3 million hectares followed by Argentina (2.8 million hectares) and Italy with more than one million hectares. In Asia, China, India and Japan are the largest organic producers. Japan is the region’s largest market and buys majority of Asia’s production.

Social research concentrates more on socio economic variables to find out effects of the events that take place in social system. The magnitude of variation in the variables assumes to bring variation on the effect. The variables relating to farmers of small farms are many and they are specific to farming system of the coastal ecosystem. Such variables were grouped under personal, social, economic, communication behaviour, marketing behaviour, farming behaviour and training. The sub variables under each heading were given in the following table.

This chapter “Research Methodology” deals with methods and procedures followed in conducting the study. The chapter contains three parts. The first part deals with the sampling technique and the second part covers the empirical measures of different variables and last part describes details of data collection and statistical measures used in the study.

3.1. Brief description of the state

Odisha a coastal state of India lies in between 170 31’ to 220 27’ North latitude and 810 27’ to 870 30’ East longitude. It is bounded by West Bengal in the North East, Jharkhand in the North, Chhatisgarh in the West, Andhra Pradesh in the South and Bay of Bengal in the East. The main features of the state are given in Table 2.

Concept of sustainable agriculture is of multiple dimensions. It denotes potential of technology, fragile ecosystem, and human interference of limited natural resources. An understanding of sustainable agriculture in brief indicates:

1. Increase in production with efficient use of resources

2. Control of external inputs of synthetic nature

3. Nutrient cycle within the farm must be closed.

Technical Advisory Committee (TAC) of CGIAR reveals that sustainability is a dynamic concept that allows for changing needs of a steady increasing global population. Sustainable agriculture should involve the successful management of resources for agriculture to satisfy changing human needs while maintaining or enhancing the quality of environment and conserving natural resources.

The dictionary meaning of sustainability is to keep an effort continuously the ability to last out and keep from falling. Sustainability basically refers to the capacity to remain productive while maintaining the resource base. Locker (1988) explained the term sustainable, a time dimension and the capacity of farming system to endure indefinitely. The concept of sustainability should serve as guide to agricultural practices. It must include technology and practices that both sustain and enhance productivity to meet the increasing food demands (Rutton, 1988). In short, environmental sustainability implies that it is compatible with and supportive of the criteria like;

With increase in population, demand for basic needs has been steeply rising during the past decades in most of the developing countries of the world. The growing population needs food, clothing, shelter, fuel and fodder for them and their livestock. In India, 50 to 70% of the people are living in rural areas that neither have adequate land holdings nor alternate service opportunities to produce or procure these basic commodities.

The present day living demands quality life. The quality life can be maintained provided our surroundings remain intact or improved to provide means for better living. With increasing advancements in science and technology, we have manipulated our environment without paying adequate attention to consequences. The result has become so alarming that now all the countries of the world are trying to actualize the meaning and concept of sustainability. It is more so in case of agriculture as it forms core base of life supporting system.

The magnitude of manipulation varies from country to country depending upon level of development. It goes without saying that development and manipulation of environment are interrelated having positive and negative effects. To eradicate ill effects of manipulation, we need to understand the meaning of actualizing of sustainability.

Introduction

The right to food is the most fundamental among the human rights. Food production, distribution and consumption is an important issue for developing countries. The dimensions of food problem in Asia have been changing since the food crisis of sixties and seventies. The lesson of those years is well-learnt, and attaining self-reliance in food came to be recognized as a key goal of development. Most of the Asian countries have been suffering with many problems such as slow growth rate in cereal production, large share of agriculture in the gross domestic product, weak infrastructure, low purchasing power and massive rural poverty which had made the South Asia region as a whole food deficit (Plumb, 1998).The possibility of impending world food crisis looms largely from increasing pressure on national agricultural sector to meet the demands triggered by rising population, growth in people’s income and change in expenditure and consumption pattern (Ghosh, 2001).

Introduction

In India, per capita cereal consumption has been declining since the early seventies, despite a significant increase in per capita cereal production (Radhakrishna and Ravi, 1992 and Rao, 2000). Cereal consumption per capita per month fell from 15.35 kgs in 1970-71 to 12.70 kgs in 1999-2000 in rural area and from 11.40 kgs to 10.40 kgs in urban area during same period. It might be due to shifting of consumers’ choice from food to non-food items; from cereals to non-cereals within the food group and from course to fine cereals within the cereal group. The decline in cereal consumption has been higher in the rural area due to development of rural infrastructure and availability of job opportunities which ultimately helped in improving their level of income (Rao, 2000). Despite spectacular growth in food production during last 30 years the problem of malnutrition still persists across different regions in India because increase in food grain supply alone cannot conquer hunger and malnutrition.

The consumption pattern and nutritional status have also experienced a significant change during last two decades in Bihar. Cereal consumption per capita per month has declined from 476 gms in 1983 to 455 gms in 19992000. The situation is more alarming in poor households who constitute about half of rural population in north Bihar. There is lack of research on consumption pattern, nutrient intake and nutritional status based on household data, particularly in context of Bihar. In view of the above observations the present study is undertaken to analyze the consumption pattern and nutritional status of poor households in north Bihar.