eChapters

Introduction

In India, the Micro and Small Enterprises (MSEs) sector plays a pivotal role in the overall industrial economy of the country. It is estimated that in terms of value, the sector accounts for about 39 per cent of the manufacturing output and around 33 per cent of the total export of the country. Further, in recent years the MSE sector has consistently registered higher growth rate compared to the overall industrial sector. The major advantage of the sector is its employment potential at low capital cost. As per available statistics, this sector employs an estimated 31 million persons spread over 12.8 million enterprises and the labour intensity in the MSE sector is estimated to be almost 4 times higher than the large enterprises.

Definition for SMEs is often considered to be an obstacle for business studies and market research. Definitions in use today define thresholds in terms of employment, turnover and assets. They also incorporate a reasonable amount of flexibility around year-to-year changes in these measures so that a business qualifying as an SME in one year can have a reasonable expectation of remaining an SME in the next.

Introduction

The farmer’s socio-economic conditions continue to be poor. The job availability and opportunities are also very poor in rural areas and are declining with time. There are several instances of despair amongst farmers due to heavy burden of loan, which they took for procuring inputs for crop production. In majority of the cases loan is still borrowed from the local moneylenders on a very high rate of interest, as it is convenient and simple for them. The despair arises due to non-payment of loan in the event of crop failure or market crash for that crop, for which he had taken loan. The reason for crop failure may be adverse climatic conditions or pest attack, which could not be managed due lack of know-how and non-availability of good quality agro-chemicals. Report about the presence of spurious pesticide and fertilizers in the market are quite common in media. Farmers meet unfair treatment in the market while procuring inputs and marketing their produce. The market is uncertain and several times the farmers are not able to meet even the variable cost of production.  There is no other option left except ploughing back the crop in the field. The majorities of our farmers are small and marginal and unable to bear such losses on one hand and government doesn’t have a contingency plan to help the poor farmers on other hand. Even if it provides some help it doesn’t reach the affected farmers.

Introduction

Indian economy is characterized predominance of rural population and is heavily dependence on agriculture sector. The major challenges to the growth and prosperity of the country are unemployment and poverty. Various attempts by government in the past have yielded only marginal success. The problem of rural unemployment and poverty can be solved by creating some new avenues for employment generation in the rural areas. Majority of farmers are still using traditional farming practices. The concept of entrepreneurship in agriculture can play vital role in improving their livelihood security and alleviating the poverty.  The individuals involved in farming/industrial activity should posses drive, ambition, foresight, and imaginations to break their traditional barrier, overcome social inertia, transform theory into practice. The individuals performing these functions are the entrepreneurs, and their enterprising ability and skill can be termed as entrepreneurship (Kothari, 1989).

10.1 Introduction

The objective of this chapter is to develop a data logger and indicator for fire detection in agriculture field. The data logger is designed with the help of Scilab. The system comprises of Ardiuini Nano, light sensor, MQ6, MQ135, IR sensor, temperature sensor, power supply. The system is designed to take sensory data on Scilab with serial communication. Fig.10.1 shows block diagram for a system. Table.10.1 shows the component list required to develop the system.

Presently the farming situation urges need to develop farming techniques, which are sustainable from environmental, production, and socio-economic points of view. Modern agricultural production throughout the world does not appear to be sustainable in the long run. Sustainable agricultural development “is the management and conservation of the natural resource base and the orientation of technological and institutional change in such a manner to assure the attainment and continued satisfaction of human needs for the present and future generations”. Such sustainable development in the agriculture, forestry and fishery sectors, conserves land, water, plant and animal genetic resources, is environmentally non-degrading, technically appropriate, economically viable and socially acceptable. Such concerns imparted a way to organic farming. It is the need of the day to understand the prospects and problems of organic farming to launch a successful and flawless organic production programme in the farm of environment.

Organic farming

It is the most widely recognized alternative farming system to chemical agriculture evolved during 1940’s largely in response to the publication of J.I Rodale in the U.S., Lady Eve Balfour in England and Sir Albert Howard in India. In 1980, USDA released a landmark report on organic farming. The report defined organic farming as follows;

“Organic farming is a production system, which avoids or largely excludes the use of synthetically compounded fertilizers, pesticides, growth regulators, and livestock feed additives. To the maximum extent feasible, organic farming systems rely upon crop rotations, crop residues, animal manures, legumes, green manures, off-farm organic wastes, mechanical cultivation, mineral bearing rocks, and aspects of biological pest control to maintain soil productivity and tilth to supply plant nutrients, and to control insects, weeds, and other pests”.

13 1. Rishi Krishi

Drawn from Vedas, the Rishi Krishi method of natural farming has been mastered by farmers of Maharashtra and Madhya Pradesh. In this method, all on-farm sources of nutrients including composts, cattle dung manure, green leaf manure and crop biomass for mulching are exploited to their best potential with continuous soil enrichment through the use of Rishi Krishi formulation known as “Amritpani” and virgin soil. 15 kg of virgin rhizosperic soil collected from beneath of Banyan tree (Ficus bengalensis) is spread over one acre and the soil is enriched with 200 lit Amritpani.

It is prepared by mixing 250 g ghee into 10 kg of cow dung followed by 500 g honey and diluted with 200 lit of water. This formulation is utilized for seed treatment (beej sanskar), enrichment of soil (bhumi sanskar) and foliar spray on plants (padap sanskar). For soil treatment it needs to be applied through irrigation water as fertigation. The system has been demonstrated on a wide range of crops i.e. fruits, vegetables, cereals, pulses, oilseeds, sugarcane and cotton.

15.1. IFS Components Tested for Wetlands

Area Allocation;

In 1 ha of land

75 % - Cropping

10 % - Fodder cultivation

3 % - Goat shed

12 % - Fish pond

Possible Integrations:

Paddy is cultivated about 45 m ha in India, less than 1% is under organic cultivation.

16.1. Varieties

Good quality fine varieties like Ponni, Super ponni, insect and disease resistant varities must be selected for getting higher yield and returns.

16.2. Seeds

Organically produced seeds only must be used.

16.3. Seed Treatment

For 1 kg of seeds 20 g Azospirillum, Pseudomonas and 10 g Phospobacteria must be used with rice gruel.

Panchagavya spray @ 1% for treating the seeds.

The transition from conventional to organic farming requires numerous changes. One of the biggest changes is in the mindset of the farmer. Conventional approaches often involve the use of quick-fix remedies that, unfortunately, rarely address the cause of the problem. Transitioning farmers generally spend too much time worrying about replacing synthetic input with allowable organic product instead of considering management practices based on preventative strategies. Here are a few steps new entrants should follow when making the transition to organic farming:

20.1. Understand the Basics of Organic Agriculture and the Organic Farming Standards

Since organic production systems are knowledge based, new entrants and transitional producers must become familiar with sound and sustainable agricultural practices. Transitional producers should be prepared to read appropriate information, conduct their own trials and participate in formal and informal training events. As mentioned, switching from conventional to organic farming is more than substituting synthetic materials to organic allowed materials. Organic farming is a holistic system that relies on sound practices focused on preventative strategies. Since there are often few organic remedies available to organic producers for certain problems, prevention is the key element in organic production.

The great Indian epic ‘Ramayana’ says that ‘Lord Rama’ has tried to cross over the Bay of Bengal so as to reach Sri Lanka from India from three points along the southeastern fringe of the Indian coast. Firstly, he is said to have tried to cross from Vedaranniyam which is mythologically called as ‘Kodiyakkarai’ Secondly from Manamelkudi and finally crossed over to Sri Lanka from Rameswaram Island (Fig.1), as the former two coastal locations were widely separated from Sri Lanka by Bay of Bengal and the Rameswaram Island was nearer to Sri Lanka during that period. But, the recently acquired satellite data shows the huge accretion of sediments and rapid land building activity off Vedaranniyam coast (Fig. 2 and 3). The geomorphic interpretations carried out using IRS 1A imagery and 14^C archaeological dating of such geomorphic features have shown that such ongoing sediment accretion phenomena off vedaranniyam nose might in future connect the Vedaranniyam part of Indian Peninsula with Jaffna Peninsula of Sri Lanka if the sediment accumulation continues unabated. The sediment accretion in this area, therefore, requires detailed studies particularly in the context of the coastal ecosystem (Fig. 1).

Concepts

The concepts of development communication has now been adopted by almost all the countries of the third world. It is all about to inform, motivate and influence all sectors and levels of peoples of a developing country to use unfamiliar ideas, skills and instruments, thus adding the long neglected social component without which the process of development remain dormant. Thus importance of communication as a tool to motivate and persuade people for eliciting positive response to various developmental ideas grow manifold.

The evolution of the term ‘ development’ has had a fascinating history about itself. In its broadest sense ‘ development’ tends to be umbrella under which several phenomena - varying from human and spiritual development to economic and community development, as well as technological development have become related. Defining ‘development’ is not an easy talk. It has been interpreted in various ways by sociologists, economists and development planners. They defend the term according to their own frame of reference. Modernization, social change and enhancing quality of life are often used in one way of the other in explaining the term. In all cases development suggest some amount of improvement, self-reliance, uplift and progress as also awareness and self-awareness to some extent.

The eminent communication scholar, Everett M. Rogers, has development this process of thinking about development in this book communication and development critical perspectives (1976), as under “Development as a widely participatory process of social change in a society, intended to bring about both social and material advancement (including greater equality freedom and other valued qualities) for the majority of the people through their gaining greater control over their environment.

The new paradigm of development does not envisage the role of communication as that of magic multiplier of development, however, it is certainly envisaged to play a facilitate role in the process of development.

The word communication comes from the Latin communis meaning common. This implies that when we communicate, we are trying to establish commonality with someone through a message. Communication then is a conscious attempt to establish commonality over some idea, fact, feelings and the like with others. In essence, it is a process of getting a source and a receiver tuned together for a particular message or a series of messages.

According to Thayer (1968) there are four types of communication. They are:

Intrapersonal Communication

This refers to communicating with one’s self. It refers to organizing and converting sensory data into meaningful messages having some relevance or utility for an individual’s past, present or future behaviour. Because the psychological system of a human being is constantly engaged in making sense of its environment in the service of that orgnaism’s adaptive and goal seeking needs, the question is not whether communication is going to occur, but what communication and with what consequences. Communication is a continuous process and is determined by an individual’s take-into-account abilities and take - into - account susceptibilities. However, these take - into - account abilities are a function of the capacity of an individual’s conceptual system to ascribe meaning or significance to certain patterns and sequences of the events going on in his internal and external environment.

Intrapersonal communication is a co-function of the individual and of what is going on in his environment that has immediate relevance for him. All that we perceive and comprehend, must be perceived and comprehend through ourselves.

Introduction

In today’s world, the use of Information and Communication Technology (ICT) have become more common and part and part of human life. It plays many roles for a country’s overall growth and economic development. Among all developing countries, the presence of ICT is greatly felt in India. People here use ICT devices mainly to access and share data information available around the world from any part of the country and at any time with just one click. In the last fifteen years, India’s economic growth has been remarkable in trade and commerce, communication technologies, education, transportation, agriculture and administration mainly due to development of advanced software and service based applications. India stands as a role model for many other countries in framing ICT based policies and implementing independent strategies for global contracts (Carmel 2003; Heeks and Nicholson 2004). Since, its significance is highly realised by the Government, bureaucrats and policy makers’ efforts are now being carried out to utilize ICT tools for improving the lives of the Indian rural maases and people below poverty line.

Introduction

Interactive media is the integration of digital media including combinations of electronic text, graphics, moving images, and sound, into a structured digital computerised environment that allows people to interact with the data for appropriate purposes. The digital environment can include the Internet, telecoms and interactive digital television. No wonder it is difficult for new entrants to understand. The important concepts to hold on to are ‘interactive’ and ‘media’ across a range of ‘delivery channels’ or ‘platforms’. There are many terms used to denote the interactive nature of digital applications—multimedia, new media and interactive design are common examples. Because the interactive sector has quickly evolved through phases, the terms have often been coined to reflect a phase that then gets surpassed. A quick historical overview will give the background that causes confusion for those joining the dynamic sector.

The word Multimedia used to have a specialist connotation for the audio-visual industry. Uses of multiple or mixed media in such analogue systems as slide shows or overhead projectors were known as ‘multimedia’. But this specialist use was superseded by the arrival of digital technology. Integrated digital media was termed interactive multimedia and usually shortened to plain multimedia for convenience. The need to differentiate between analogue (linear) and digital (interactive) uses of media spawned other terms like New Media and Digital Media. The term ‘New media’ carries its own problems as the media associated with the original term are replaced with newer instances of the ‘new’. Obsolescence is endemic in the interactive arena. However, the term remains in use although Digital Media and Interactive Media are more stable terms and are being used increasingly. The term Interactive Media highlights the interactive connotation that is a key characteristic of the difference between the older style media and the new. ‘Social media’ has evolved to describe the more recent success of digital social sites such as Facebook and MySpace, and would include the phenomenon of mobile texting, especially twitter.

Introduction

e-Literacy as defined by the United Nations Educational Scientific and Cultural organization (UNESCO) refers to the awareness, skills, understanding and reflective approaches necessary for an individual to operate comfortably in information-rich and IT enabled environments. Most definitions of e-literacy or digital literacy covers three abilities

• The ability to use digital technology, communication tools or networks to locate, evaluate, use and create information

• The ability to understand and use information in multiple formats from a wide range of sources when it is presented via computers

• The ability to perform tasks effectively in a digital environment

To promote e-literacy, every state in India has initiated a project in their own names. For example, in Kerala the e-literacy is promoted in the name of Project Akshaya. Initially, this project was started with a noble intention of making at least one member in each of 64 lakh families e-literate. The pilot project started in Malappuram, and was inaugurated by His Excellency Dr. A.P.J. Abdul Kalam, former President of India on 18th November 2002. 100% eLiteracy was achieved in eight districts in Phase 1 and the project has been roaring success. Nowhere has such a feat been attempted or accomplished. The vision and scope of the project is beyond comparison. The operations of Akshaya as unfolded so far consist of three distinct phases. The first phase is that of enabling the masses by imparting basic skill in computer operations and making them familiar with internet. This phase is the period of eLiteracy training. In the initial phase, the Akshaya ecentre imparts basic training that not only familiarizes people with the basics and the scope of IT, but also ensures hands-on-skill in operating a computer, using the Internet etc to at least one person in the 64 lakh families in the state that makes it the largest rural eliteracy training project worldwide. Malappuram is declared as the first eliterate district in India. Malappuram and Kannur districts were already declared 100% eliterate. Kollam, Kozhikode, Thrissur and Kasaragod districts achieved eliteracy above 90%. So far around 33 lakhs beneficiaries were trained.

Introduction

The past decade has witnessed a revolution in the use of ICT in Developing countries. Many people and offices as well as rural farmers own ICT facilities such as personal computers and mobile phones. The largest increases in the use of ICT has been in mobile telephony where subscriptions in developing countries increased from about 30 percent of the world total in 2000 to more than 50 percent in 2004 and to almost 70 percent in 2007 (Cieslikowsk, Halewood, Kimura, & Zhen-Wei Qiang, 2009). While internet use has not increased as rapidly as mobile communication, it increased tenfold in developing countries in the same period (Cieslikowsk et al., 2009). Other ICT facilities such as telecast, radio FM and information centres have also increased in number remarkably during the same period. A study by Farrell & Isaacs, (2009) on ICT in 53 African countries revealed the wide use of ICT in the region with countries such as Algeria, Egypt, South Africa and Botswana leading in ICT use. In East Africa, Rwanda is probably the most advanced country in terms of ICT use with 65% of its population being covered by mobile telephony. The country has also a high level of internet use and access to television and radio broadcasts. In Kenya, Uganda and Burundi the use of ICT is also well advanced, especially for mobile phone subscribers, TV and radio listeners (Farrell & Isaacs, (2009). This high use of ICT is likely to stimulate economic development in developing countries, including the agricultural sector where a high proportion of the African population derives their livelihoods. Before 1990, ICT use in Tanzania was mainly limited to radio and landline telephones. New ICT started in the mid-1990s, and by 2001 it was estimated that Tanzania’s ICT industry had generated USD 300-350 million per year. There are now a number of ICT development initiatives in the country funded by the government, donor countries and the private sector. Such initiatives range from telecentres and mobile phones in rural Tanzania to e-Government initiatives being implemented in the major cities and towns of Tanzania.

The emphasis on greater participation of the beneficiaries in the development pro- cess on general and in message development process on general and in message development on particular has led to a reorientation on the study and operation- alization of the role of communication in development activities. There is a shift from the concept of development communication (DC) with its emphasis on top- down, big-media centered government to people communication to development support communication (DSC) focused on co-equal, little-media centered govern- ment with people communication.

A concomitant development is the emergence of a development professionals : the development support communicator, who mediates between the technical experts and their beneficiaries. This person is required to help the beneficiaries interact with the technical personnel, administrators, etc. as co-equal partners. Thus, the new horizontal axes provided by development support communicator will counter- balance the vertical axes of development communication involving the technical change agents.

Definition

• If a communication source decodes the message that he encodes, if the mes- sage is put back to his system, we have a feedback.

Berlo (1960)

• Feedback is defined as the action reaction interdependence in communica- tion.

• The return to the input of a part of the output is the feedback.

• Feedback is the reaction on the part of the receiver to a sender’s communi- cation.

8.1 INTRODUCTION

To implement a good GIS project, a well structured project design and management are essential. Well planned project will give fruitful result within the stipulated time. Project not completed in time will not incur more cost and also the time delay will add negative value to the project. Hence all the elements in project planning and implementation should be considered to have a desired result. Some of the issues are also present in GIS and they will be rectified in the next decade.

8.2 PROBLEM IDENTIFICATION

Any project is coming into reality due to necessity. If water scarcity is more in a hard rock region with sufficient rainfall, it is important to augment groundwater resource using rain water harvesting structures. It is important to build water harvesting structures like check dam, percolation pond in suitable locations so that groundwater recharge will be more. Hence a problem is identified and the project work may be carried out by a government or private organisation and the result is given to the government to implement the project. Likewise many area may require a project in GIS environment for planning. Once a project is created any development taking place can be added and GIS database is updated.

Abstract

A huge technical improvement in Information Technology (IT) has made new instruments (e.g. WEB-GIS, Open Source platforms, DBMS with geometric data) available. Distributing geospatial information on the Internet is an enforcing factor for information providers. For dissemination of spatial data, Web-GIS technology can be used, which is amalgamation of several information technologies. Open Source is a philosophy of providing software with better quality, more flexibility, and lower cost. This paper explains the use of Open Source Web-GIS which provides a fast and globally reachable way not only to represent the information about natural resources through maps and statistics but also possibility of processing the information interactively on web.

Keywords : Web-GIS, Open Source, PostgreSQL, PostGIS, GeoServer, Wetlands

1.0 Introduction

India is blessed with diverse and abundant resources. India has been witnessing tremendous growth which has impacted practically every aspect of environment and the common man. Natural resource has been tremendously in use due to increase in population growth, thus generation, dissemination and sharing of information regarding natural resources and data amongst all stake holders have become a necessity. The utilization of modern technologies such as remote sensing, GIS which are effective in management of natural resources as user can store, retrieve and model the spatial information. Web media is playing a vital role in making people aware about the importance and conservation of natural resources. We are presenting such efforts with use of Free and Open Source Software (FOSS) tools.

This practical assignment is designed in a way that students will acquire knowledge on various development departments in the district, especially on organizational structure, functioning and activities of any agency like District Rural Development Agency (DRDA).

PURPOSE

To get the students acquainted with the organization and functioning of DRDA.

To give the students a brief idea about the organizational structure and functions of other development departments at district level.

This visit gives students an exposure to mass media like radio, television studio and helps them in understanding elements, equipment and overall process of programme production used for disseminating information on agriculture and rural technologies.

PURPOSE

To get acquainted the students about the mass media by visiting the community radio and television studio

To know the operating system how a programme is delivered in the radio and television

This practical assignment is associated with the evaluation of communication fidelity with in a communication process where in all the communication elements are responsible to contribute the same.

PURPOSE

To understand the communication gap which arises due to emergence of noise in the channel

To understand the importance of communicator’s ability to organize and treat the message for making communication effective

To understand the distortion (addition or deletion or alterations in the original message) in communication.

This practical assignment is dealt with the appropriate extension strategies and methodologies adopted by various extension institutes in disseminating proven agricultural technologies to various stakeholders under university extension system.

PURPOSE

To get acquainted with the university extension system.

This assignment focuses on various methods in identifying the rural or local leaders in the social system and helps the students in case of identifying the specialized roles of extension workers at grassroot level.

PURPOSE

To identify rural leaders for collecting information about the village.

To assess the role of rural leaders in transferring new technology to the villagers through rural leader.

THEORETICAL ORIENTATION

One of the training methods used in management training and technical training is workshop method. The word workshop is borrowed from the area of industry. As the word says, in the workshop of industries, practical work is done by the workers. Similarly, through workshop method, some works are done by the participants who are actively involved in the same. One component which is common for all the methods is the person who conducts the proceedings of the method. We may call him a trainer or more appropriately for this method the director of the workshop. In using workshop method, the trainer needs a few experts who may be called as consultants or co-trainers. The trainer cannot handle the workshop situation single-handed.

A workshop schedule is very much important for planning an effective workshop method. It will help arrange all the necessary materials and the people well in advance to organise the workshop programme successfully and achieve the objectives of the workshop for which it is organised.

This practical assignment is conceptualized and designed to improve skill of the students on micro teaching for managing teaching situation.

Purpose

To get students acquainted with the micro teaching exercise.

To allow the students for progressive training for the management of teaching situation.

To improve specific micro-teaching skills involved in teaching.

This practical assignment is conceptualized in a way that students will gain a deeper understanding of the rural situation and can prioritize the rural needs which will eventually help in achieving overall development of the rural people.

PURPOSE

To gain a deeper understanding of the rural situation.

To encourage students to analyze the needs of the rural people on priority basis and thereby helping in planning effectively for rural development.

To acquaint the students with the areas that needs to be more strengthened in case of achieving overall development of the rural people.

This practical assignment is dealing with planning and preparation of agricultural information materials- leaflet, pamphlet and news stories, in this assignment required guidelines are provided for the students for preparing these agricultural extension material more effectively.

PURPOSE

To equip students in preparing Agricultural Information Materials like leaflets, pamphlets and news stories.

This practical assignment is associated with the planning, preparation and presentation of Microsoft PowerPoint slide. This assignment not only helps students in gaining first-hand knowledge on preparation of PowerPoint slide, but also improves their presentation skills while presenting a presentation before the audience.

PURPOSE

To acquaint students with first-hand knowledge about the power point slides and how to prepare it.

To get an idea about the presentation of power point slide in front of the audience.

This practical assignment is conceptualized and designed to guide students in identifying and preparation of project proposals. This assignment provides an opportunity for the students to explore, thing and putting their ideas on paper.

PURPOSE

 To provide an idea about project in entrepreneurship development.

 To identify the project and its importance.

 To know about the preparation of project.

This practical assignment is associated with visiting any two public/ private sector agricultural enterprises. This assignment provides a platform for the students to study structure, function and activities of the enterprise and gives an opportunity to analyses the same.

PURPOSE

 To help the students visit and observe directly the structure and activities of both public and private sector enterprises.

 To enable the students to find out the differences between the public and private sector enterprises with respect to certain aspects.

Site-specific weed control technologies practiced in precision farming are defined as machinery or equipment embedded with technologies that detect weeds growing in a crop and take action to maximise the chances of successfully controlling them taking into account predefined factors such as economics.Some of the commercial hardware and software developed for precision agriculture practices comprise tools for weed mapping and control software that adapts spraying to local weed occurrence. However, few farmers have adopted sitespecific weed management, although several studies have shown that weed occurrence and density varies significantly within a farm or a field. Site-specific weed control techniques have gained interest in the precision farming community over the years. Managing weeds on a subfield level requires measuring the varying density of weeds within a field. Decision models aid in the selection and adjustment of the treatments, depending on the weed infestation. The weed control can be done either with herbicides or mechanically. A site-specific herbicide application technology can save large amounts of herbicides. Mechanical weed control techniques adapting to the weed situation in the field are applicable to a wide spectrum of crops.

A system for the discrimination of different weed species and crops from images is done which generates weed maps automatically. Models for the yield effect of weeds are developed and applied in on-farm-research experimental setups. Economic weed thresholds are derived and used for an herbicide application with a patch sprayer.Herbicide use has not eliminated weed problems in agriculture and the need for manual weed removal is still an issue within specialty crop systems, particularly during the first several weeks of crop emergence when competition for resources is greatest.

Precision agriculture is a powerful technology with potentially important applications to weed management. However, growers should remember good agronomic practices, including preventing weed infestations, managing herbicides wisely to prevent resistance, and minimizing environmental impact associated with weed management. Weeds, and methods used to control weeds, can have negative economic and environmental impacts. With precision agriculture, growers can take advantage of the patchy nature of weeds by targeting management efforts only where they are needed instead of wasting expensive and potentially hazardous inputs where weeds are not present. Weeds are patchy because weed spread, survival, and reproduction are variable within a field and over time. Weed patches stay in about the same place from year to year, even though weed density within a patch may vary

Plants require proper environment for its growth and development. If environment is not suitable crop would not do well. To ensure proper environment to commercial crops for their better growth and development covered structures are used which provide microclimate appropriate for their growth and development. Growing of crops under such protective structures, also known as greenhouses, is termed as greenhouse technology. The structures harness solar radiation for photosynthesis in plants or can be provided with artificial lights (LEDs) for the purpose. The technology embraces many aspects of farming such as modelling of structures, agronomic practices for the production of the crop and the commercial viability of the venture. The technology ensures crop production in a cover more or less independent of natural prevailing environment. The covering or cladding permits desirable aspect of sun and air and help in modifying crop production environment inside. The modification of environment is aimed of creating micro-climate inside the structure/greenhouse most appropriate for the growth and development of the crop.

Hence greenhouse can be defined as a framed or inflated structure with claddings like glass polyethylene sheets, poly carbonates, fibre reinforced plastics and others in which plants are grown by creating microclimate conducive to crop for its growth and development with or without automation and mechanization. The purpose of growing crops under greenhouse conditions is to extend their cropping season and to protect them from adverse environmental conditions, such as extreme temperatures, precipitation and pests. A large number of greenhouses/poly houses have come up in almost all states of India. Though in infancy but greenhouse cultivation particularly in horticulture crops and nursery production is visible.

Soil is the main growing medium. Natural as well as synthetic substitutes to soils are cropping up. Under greenhouse cultivation growing medium is generally top soil as used in open field/traditional farming. The practices of soil preparation for planting crops are more or less same as under open field. Generally, crops are planted on raise beds. As under open conventional farming soil preparation are made as per the crops or their varieties/hybrids to be grown. To enrich the soil with nutrients soil is tested for its physical and chemical properties and amended accordingly keeping in view the crop requirement. The soil composition is checked with each crop cycle and amended as per requirement of next crop. To avoid the harmful microbes and insects build up in the soil it is advisable to solarize or fumigate the greenhouse soil each year during hottest month of the year. Soil solarisation is an environment friendly soil pathogen management method and practiced widely in north India.

Soil Solarisation

Soil solarisation is an environment friendly method of using solar thermal power for controlling pests such as soil borne plant pathogens including fungi, bacteria, nematodes, and insect and mite pests along with weed seeds and seedlings in the moist soil by mulching the soil usually with a transparent polyethylene cover, to trap solar energy in greenhouses. It may also be described as a method of decontaminating soil or soil disinfestation using sunlight or solar thermal power. This energy/temperature causes desirable physical, chemical, and biological changes in the soil.

The variety of greenhouses and greenhouse material, equipment and accessories are so many. However, there are certain basic materials that essential in almost all types of green houses. These are

Structural framing materials

Such materialsinclude low maintenance non-heat conducting timber; strong and durable galvanized steel; or light, low-maintenance and sturdy aluminium alloys. Though plastic pipe frames are usable, they are not very strong to withstand snow load or strong wind sheering forces. What one should choose as the framing material would be determined by the material one wishes to use as glazing, his budget and the permanence of the structure one desires. Aluminium is a popular material for greenhouse framework because it is relatively lightweight, rustproof, affordable and easy to assemble. The downside is that it is not a good insulating material and in very cold weather, heat loss from the metal frame could inflate your heating bill. Also, you would need to look for sturdy frames if your greenhouse is located in an area that experiences high winds. Condensation could also occur on an aluminium frame. Wooden structural frameworks for garden greenhouses are also a popular choice for its aesthetic value, natural feel and the ’warmth’ it exudes. It is an easy material to work with especially if you are not using a greenhouse kit for building. Some greenhouse owners would settle for nothing else as they believe it is the only material that complements the natural beauty of plants inside the greenhouse! Wood is a good insulating material so it will not allow heat loss in cold weather. Reinforced wood has superior strength and has an excellent load bearing capacity. Being a natural material, it has the potential to develop mildew or disease and offer a haven to tiny pests. So, when you choose wood to build the framework of your greenhouse, be sure that you pick a high quality hardy wood such as redwood, cypress or cedar. Also, treat wood with non-hazardous chemicals so that your plants are not adversely affected. The preservatives used for wooden greenhouse frames should be pressure treated, salt type or copper naphthenate. Copper naphthenate is a general use preservative used for pressure treating utility poles and timber. It is known to be very effective in preventing mould, mildew and dry rot. It works very well against wood-damaging fungi and insect pests. Pentachlorophenol is a restricted use wood preservative and is toxic to plants and humans. It is not available to the general public and poles or timber treated with it are not suitable for use in a greenhouse. PVC pipe can also be used as support for small greenhouses that are to be covered with polyethylene, but PVC requires additional support to withstand strong winds. Being flexible, PVC can be used particularly well in hoop houses. Though it has the advantage of offering insulation and, if UV treated, are long-lasting, they are not good at bearing the load of hanging baskets and shelving to any appreciable degree. PVC that is treated to be resistant to ultraviolet radiation is also known as UPVC.

About 80% of the world population live in developing countries and are dependent on agriculture. Agricultural products, just after harvesting, are dried to the safe moisture level. Open solar drying for drying agricultural products is being practiced since ages throughout the world. Due to its several drawbacks as danger of (dust, rain, ultra-violet rays, birds, animals etc.), advance technique, i.e. greenhouse drying, is being adopted for drying crops to reduce the drying time and increase the quality of the food products.

Drying involves a heat and mass transfer phenomenon in which heat energy supplied to the product surface is utilized in two ways: (i) to increase the product surface temperature in the form of sensible heat and (ii) to vaporize the moisture present in product through the provision of the latent heat of vaporization. The removal of moisture from the interior of the product takes place due to induced vapour pressure difference between the product and surrounding medium. The moisture from the interior diffuses to the product surface to replenish the evaporated surrounding moisture.

The working principle of greenhouse drying is in which the product is placed in trays receiving the solar radiations through the plastic cover and moisture is removed by natural convection or forced convection.

Greenhouse drying are being adopted to reduce the losses and to increase the quality of the dried products. Solar energy is the most promising power source of energy for drying of agricultural products. Most of the farmers adopt open sun drying because it is abundant and inexpensive. But the open sun dried products are also subjected to remarkable losses due to environment. Losses of fruits and vegetables are estimated to be 30%-40% during drying under open sunlight. The post-harvest losses can be reduced by adopting advanced means of drying, i.e. greenhouse drying. The greenhouse dryer can be operated in natural and forced mode as required. Studies reveal that the greenhouse dried products are of superior quality and better colour retention as compared to open sun drying.

Flooding

Flooding affects both above and below ground ecosystem processes in greenhouses. Below-ground changes may be less obvious, they are as important as the above-ground changes. Soil microorganisms are sensitive to disturbance, and shifts in soil microbial community structure are expected when anaerobic conditions develop from flooding. The useful aerobic microbes are destroyed by flooding. It takes time to built-up their population in the soil to benefit plants. Due to anaerobic condition created by flooding in greenhouse plant roots in soil are not able to breath, function and hence wilting of plants occurs. Flood irrigation in excess create flood like condition in greenhouses at time. Excess water in soils is a major factor affecting plant survival and functioning. In saturated soils, the supply of atmospheric oxygen into the soil is curtailed and various facultative and obligate anaerobic microorganisms use oxidized compounds as electron acceptors for respiration, thus converting them to reduced forms. The reduction and the associated processes influence plant survival, growth and functioning in wetlands. Flood irrigation should always be just wet the soil not flood inviting stagnation of water.

A chain of reactions is initiated upon soil flooding leading to reduced soil redox potential conditions. These reactions include physical, chemical and biological processes that have significant implications on plants growth. Physical processes include restriction of atmospheric gas diffusion in the soil leading to depletion of soil oxygen and accumulation of carbon dioxide. Shortly after flooding, the limited supply of oxygen in soil pore spaces is depleted rapidly by roots, microorganisms, and soil reductants. This process leads to oxygen depletion and reduction in soil oxidation reduction potential followed by a chain of soil chemical changes. The processes that follow include denitrification, reduction of iron, manganese and sulphate, and changing soil pH

Isostasy is derived from the Greek word isostasios meaning ‘in equipoise’ or in a state of balance. American geologist Dutton was the first to use the term isostasy in 1889 for the state of gravitational equilibrium that exists between continents and ocean floor and the mountains, plateaus and plains on a rotating earth, in accordance with densities of their underlying rocks. Dutton was of the view that the height of these different features was related to their density. In other words, the higher features were composed of rocks of lower density and the features of lesser to height were made of rocks of higher density. For instance, the continental blocks whose average height is about 5 kms above the ocean floor are composed of lighter rocks than the latter, and to compensate for their higher height the continental blocks go deeper into the earth so that the continents and ocean basins may remain in equilibrium. The same argument applies to the mountain ranges. The excess mass of lighter materials which rises in the form of mountain chains on the earth’s surface is compensated by light materials extending as roots into the denser strata below. In other words, the upper part of the earth’s crust is built of lighter rocks which is floating on the substratum of denser rocks. The hypothesis of the sialic rocks floating over the sima of the sub-stratum had been first put forward by Sir George Airy of Britain in 1855. The use of the word floating, of course, did not imply that the sub-stratum was in a liquid condition.

3.1.1. Introduction

Clutch is a device which is used to connect and disconnect the tractor engine from the transmission gears and drive wheels. It is fitted in between the engine and gear box. The clutch transmits power by means of friction between driving members and the driven members.

6.4.1. Function

The brake is used to stop or slow down the motion of a tractor. It is mounted on the driving axle and operated by two independent pedals. Each pedal can be operated independently to assist turning of the tractor during field work or both the pedals can be locked together.

6.4.2. Principle of operation

The brake works on the principle of friction. When a moving element is brought into contact with a stationary element, the motion of the moving element is affected. This is due to frictional force which acts in the opposite direction of the motion and converts the kinetic energy into heat energy.

7.5.1. Functions

The two primary functions of tyres, especially rear ones, are to provide maximum work output while ploughing the field and for haulage.

8.6.1. Function

It steers the tractor in the required direction. The rotation of the steering wheel moves the steering column, which in turn rotates the sector shaft. This rotation pulls the pit man arms on one side and pushes at the other side. This motion is conveyed to the wheels by the drag link and makes the front wheel turn in the requisite direction.

11.1. Hydraulic system

It is a mechanism in a tractor to raise, hold or lower the mounted or semi-mounted equipment by hydraulic means. All the present day tractors are equipped with a hydraulic control system for operating three point hitches. Some of the tractors are fitted with a hydraulic brake system and a few others are fitted with a hydraulic steering system. Tipping trailers, front mounted loaders or dozers are examples of multi use of hydraulics.

11.2. Principle

The working principle of a hydraulic system is based on Pascal’s law (Fig 11.1.) This law states that the pressure applied to an enclosed fluid is transmitted equally in all directions. A small force acting on a small area can produce higher force on a surface of larger area.

17.1. What?

The soil is prepared to a fine tilth, which is referred to as land preparation or preparatory cultivation. This enables proper sowing of seeds, planting of seedlings and precise application of fertilizers to the crop. Various implements are used to prepare the land. The basic ones are ploughs, harrows, cultivators or tillers, and land levellers. These implements are manually operated or by animals or tractors. Various improvements have been made to increase the efficiency of each one of the implements by research workers. Many products are also available to suit the local regions and soil condition.

17.2. Plough

It has been the basic implement used for decades in agriculture to open up and invert the soil for initial cultivation. While inverting the soil, it also buries the weeds and the remains of the previous crops and allows them to decay. In the process of inverting, it also aerates the soil. Ploughs were initially used with animal power. Later on, many improved implements with heavy weights have been developed. These are drawn by tractors.

19.1. Need for weeding

Weeding is the critical operation to be carried out to obtain a good crop. Weeds are plants which grow in places where they are not wanted. They grow in the fields competing with crops for water, soil nutrients, light and space and thus reduce crop yields. They also harbor insect pests and micro-organisms. Certain weeds release the inhibitors or poisonous substances into the soil which are harmful to plants, human beings and livessecks. They increase the expenditure on labour and equipment, render harvesting difficult and reduce the quality and marketability of agricultural produce. When grown in water channels, they block and or reduce the flow of water.

The weed seeds germinate earlier and grow faster than the crop plant. This phenomenon is more pronounced when coupled with favourable environment like fine soil tilth and the soil receiving adequate water and fertilizers. Weeds flower earlier and produce seeds profusely ahead of the crop. So, these seeds get mixed up with the harvested crop and are distributed to the next season or transported to other places along with the harvested produce.

20.1. What?

Sprayer is equipment used for applying insecticides, fungicides, herbicides and in some cases fertilizers as foliar sprays to agricultural crops. Sprayers range in size from man-portable units (backpacks) to Self propelled units with boom mounts covering 60-150 feet length. Sprayers include the ones used for spraying liquid formulations, dusters for dusting dust formulations and granular applicators for delivering granules.

20.2. Principle of working

Sprayers work based on Bernoulli’s principle. Basically, the sprayers have a storage tank, a plunger, lance and a nozzle. When the plunger is pushed in, the air flows at a high velocity through the nozzle. The flow of air at high velocity creates a region of low pressure just above the lance. The higher atmospheric pressure acts on the surface of the liquid insecticide causing it to rise up the lance and the insecticide leaves out through the nozzle as a fine spray.

Sprayers are fitted with hollow cone nozzles for spraying pesticides and with flat fan nozzles for herbicides.

26.1. What?

These devices are used to lift water to a height that allows access to water. Lifting devices can be used to lift groundwater, rainwater stored in an underground reservoir and river water. For agricultural use, water is lifted either from a borewell or open well to irrigate the crops. According to power sources, lifting of water can be accomplished either manually or by animal or electricity sources of power.

26.2. Human-powered devices

Man has a limited physical power output, which may be in the range of 0.08 to 0.1 hp. This power can be used to lift water from shallow depths for irrigation. These include swing basket, counterpoise lift, don, Archimedean screw and paddle wheel. However, nowadays these are not commonly used.

26.3. Animal-powered devices

Animal power is abundantly available in India. They are used to lift water, besides being put to use for other field operations and processing works. A pair of bullocks may develop approximately 0.80 horsepower. They can lift water from a depth of 30m or more. Of course, the rate of discharge will go down with increase in the lift. These include rope and bucket lift, self emptying bucket, two bucket lift, Persian wheel and chain pump.

Since the beginning of the Planning process, efforts have been made to ensure that the tribal people were included in the growth process. However, the strategy changed with each Five-Year Plan as new lessons were learnt from various developmental efforts. The First Five Year Plan emphasized the provision of additional financial resources through a community development approach to address the problems of tribal people rather than evolving a clear-cut tribal development strategy. Towards the end of the Plan (1954), 43 Special Multipurpose Tribal Development Projects (MTDPs) were created. These MTDPs could not fully serve the interest of the tribal people since the schemes were numerous and of a general nature. This approach continued during the second Five Year Plan. In the Third Plan, a different strategy for tribal development was evolved by converting the Community Development Blocks, where the concentration of tribal population was 66% and above, into Tribal Development Blocks (TDBs). By the end of the fourth Five Year Plan, the number of Tribal Development Blocks in the country rose to 504. The strategy of development through Tribal Development Blocks had its limitations as well, as it failed to address the cause of the tribal population of the country living outside the Tribal Development Blocks, which comprised more than 60% of the total tribal population. During the th on 5 Five Year Plan period, the exercise of identification of tribal majority blocks was undertaken. These were later constituted into 194 ITDAs/ITDPs in the country.

The present Tribal Sub Plan (TSP) strategy was initially developed by an Expert Committee set up by the Ministry of Education and Social Welfare in 1972 under the Chairmanship of Prof. S.C. Dube for the rapid socio-economic development of tribal people and was adopted for the first time in the Fifth Five Year Plan. The TSP strategy, with some modifications, continues till this day and the salient features concerning TSP for States, are given below:

A number of innovations have taken place towards ready to eat instant food mixes of traditional origin. These have helped people to eat traditional food in which ever part of the world they go.

MTR Company

In India the best example is of MTR company which manufactures a range of packaged foods which includes breakfast mixes, ready to eat meals, masalas and spices, snacks and beverages. Snacks, such as kodubale, khara boondi and masala groundnut are very popular as they are ready to eat packets and contain healthy food with less oil. The different spices used for mixes are procured from famous countries which give the perfect taste and avoid rancidity.As a summer launch, milkshake with canned chikoo, banana and cold filter coffee are available. MTR Foods Pvt. Ltd. is a subsidiary of Norwegian conglomerate Orkla and is an acronym of Mavalli Tiffin Rooms. According to the company, India is on the verge of explosive growth in packaged instant foods. MTR has an aim to target a market of Rs 30, 000 crore with their products of traditional meals, breakfast, snacks and desserts. The Nielsen India study has shown that in 2020, the number of consumers in this category will be 2.7 times than the current base.

Mother’s Recipe is a brand which make traditional pickles in bottles with a distribution network to 20 states in India and exporting the products globally. The manufacturing is done in-house and the raw materials are procured seasonally in large quantities. After cleaning they are cut according to the recipe. Each variety of mango pickle has its own cutting process. Some are automatically cut, while others need manual work. The use of right oils, spices roasted inhouse, and marination of the pickles according to the practices of the particular region allow many consumers to relish them. Bottling and packaging are done only when the orders come.