eChapters

Objective: This practical aims to understand the taxonomic traits of Megaloptera and Planipennia, focusing on their unique features and differences.

Objective: To differentiate and identify orthopteroid and hemipteroid groups based on their distinct taxonomic characteristics.

Combining two or more pesticides in a tank saves time and labour while also lowering equipment and application costs. However, the effectiveness of one or more products may change in some circumstances. Two or more pesticides are compatible if they may be mixed and sprayed together without changing the efficacy, physical and chemical qualities of the mixture, or harming unwanted application locations. Chemicals are considered incompatible when issues arise when more than one product are mixed..

Incompatibility

Incompatibility occurs when a pesticide is unable to be adequately blended to generate a homogenous solution or suspension. Flakes, crystals, or greasy masses, as well as significant separation, are not acceptable. Incompatible mixes like this can clog application equipment and hinder the even distribution of the active ingredient in the spray tank. This inhibits pesticides from being applied properly.

6.1 Competition

Soil microorganisms in particular are perceived as active competitors that have evolved diverse strategies to facilitate resource acquisition. Activities including motility, coordinated behavior, and antibiotic production can tip the competitive balance, resulting in numerical dominance or local extinction of competing populations. Functional consequences of microbial social behaviors have been studied extensively and demonstrate the importance of factors such as relatedness, kin discrimination, enforcement of cooperation, and competition among relatives to microbial survival and f itness in the environment (Adil Essarioui et al., 2017). However, most investigations have focused on interactions among closely related taxa, often among species or genera. Yet, in natural environments, coexistence of individuals from diverse microbial phyla and kingdoms is common. In particular, bacteria and fungi commonly coexist in soil, but there has been relatively little study of the role of species interactions in mediating the dynamics of specific bacterial and fungal populations in soil. Moreover, we have little understanding of the extent to which the ecological context, and specifically plant host or plant community diversity, may influence bacterialfungal interactions in soil. Such studies are needed to begin to establish a more complete understanding of the ecological and coevolutionary dynamics of soil microbial populations.

Microbes have coevolved to engage in complex networks of interactions with coexisting kin and non-kin individuals in the soil and in association with plants. Microbial antagonism and resource competition within complex communities have been the focus of many studies that have explored the effects of diverse factors on the ecological outcomes of these interactions. However, the concurrent impacts on these processes of plant species richness and plant host, which jointly structure the environment within which rhizosphere microbes interact, have received far less attention. This is despite the fact that both plant community richness and plant species have been shown to impact microbial community composition and function in rhizosphere soil, with potential implications for microbial interactions and pathogen suppression in natural and agricultural habitats.

Combination Fungicides

Composite or combination fungicides are made up of two or more active ingredients. The active ingredients of combination fungicides often come from two distinct chemical groups. Combination fungicide products offer an optimized combination of two or more active ingredients and the convenience of one product. Combination fungicides boost each treatment’s efficacy and extend its range of action. Combination products significantly lower pathogen populations by targeting numerous pathogens with a single treatment. Longer periods of control are achieved by further reducing pathogen populations with increased potency. Combinations of fungicides can decrease the selection of pathogen strains resistant to specific fungicides and restrict exposure to each active component.

Since the wide introduction of organochlorines and other synthetics in early 50’s farmers have heavily relied on the chemical pesticides for pest control. Over emphasis on chemical control has caused serious imbalances in the agro-ecosystem. The enormous quantities of chemicals, poisonous to microbial life, that fall on earth gets mixed up well with soil. Some problems like non-target effects of chemicals as well as latrogenic diseases are being experienced. Coupled with these, the increasing awareness of impeding pollution, health hazards and development of resistance have intensified the search for alternative strategies.

In the present investigation, the attempts have been made to test the stability and pest management efficacy of the plant extracts of some Indian medicinal plants, namely, Datura stramonium, Ricinus communis, Vitex trifolia and Nerium indicum. In the earlier chapters detailed methodologies and the results have been elaborated. This chapter embodes the comprehensive inter- and intra-comparative results and discussion on the basis of selected plants, extraction media, pest species and bioassay followed by conclusions.

The hot sterilized water extracts of R. communis were found to be more stable (i.e. 20 days to start the fermentation). In overall study the plant extracts were stable or viable means active for three to four weeks only. In most cases, the activity of cold and hot water extracts was found to be increasing with fermentation however the decrease in the activity of some extract was also observed.

The highest mean anti-fungal activity was reported for R. communis extracts followed by D. stramonium and N. indicum aqueous extracts, whereas no any anti-fungal potency was reflected by V. trifolia against test fungi species. R. communis and N. indicum extracts, the cold water method extraction showed greater positive effects in terms of mean anti-fungal potency as compared to the hot water extracts. The water extraction of D. stramonium was found to be more effective in anti-fungal activity study.

Computer vision provides an important foundation for automated plant analysis, monitoring and precision agriculture. This chapter explores computer vision approaches for plant phenotyping, disease detection, growth monitoring and yield prediction. Traditional image-processing methods are considered alongside machine learning and modern deep learning techniques, including convolutional neural networks and vision transformers. Image segmentation, object detection and classification are used to extract meaningful information from plant images and video data. The chapter also examines multispectral and hyperspectral imaging, IoT integration and real-time monitoring. Environmental variability, dataset quality, computational complexity and model generalization are discussed, together with transfer learning, data augmentation, edge computing and future directions

Food waste and loss is an enormous issue worldwide. The FAO states that ‘Hunger is still one of the most urgent development challenges, yet the world is producing more than enough food’, but a vast amount of what is produced gets lost on its way from the field to the consumer. According to the FAO, about 30% of cereals, 20% of dairy products, 35% of fish and seafood, 45% of fruits and vegetables, 20% of meat, 20% of oilseed and pulses and 45% of roots and tubers are lost or wasted. Postharvest food loss is defined as measurable qualitative and quantitative food loss along the supply chain, starting at the time of harvest till its consumption or other end uses. Food losses can either be the result of a direct quantitative loss, for example, during the process of harvest or transport or arise indirectly due to losses in crop quality such as undesired sprouting or water loss. Postharvest food loss consists of many factors, which have not changed much in the last 40 years and so postharvest food loss in general has not changed much. Figure 1 illustrates the main reasons for food loss along the supply chain and is based on ‘The food pipeline’ published by Bourne in 1977. Food loss is highest during storage due to pathogens (insects, bacteria and moulds), environmental conditions (e.g. rain, humidity, heat and frost), sprouting and quality loss (rancidity, water loss and saccharification) or animals (rodents and birds). Recently published data for Switzerland have shown that about 53%-55% of the initial fresh potato production and 41%-46% of the initial processing potato production are lost mostly due to pathogen infection, saccharification, water loss of tubers and early sprouting during storage (Buchholz et al, 2018).

Definition and Significance of Plant Diseases
Definition
A plant disease is a harmful deviation from normal functioning caused by a persistent or semi-persistent agent leading to physiological disruptions, structural abnormalities, or economic loss in plants. It manifests through the interaction between the host (plant), pathogen (disease-causing agent), and environment, which together form the disease triangle.
According to George N. Agrios (2005), a plant disease can be defined as:
“Any harmful deviation from the normal functioning of physiological processes of plants, induced by continuous irritation of a primary causal agent, leading to symptoms.”
Revised Significance of Plant Diseases
1. Economic Importance: Plant diseases lead to large-scale losses in crop production, estimated to account for approximately 10–15% of global crop yields annually (Agrios, 2005). This translates to billions of dollars in losses each year.
2. Impact on Food Security: The destruction of staple food crops like rice, wheat, and maize by diseases threatens food security, particularly in developing countries.
3. Environmental Effects: Plant diseases contribute to ecosystem imbalances by disrupting natural plant populations and affecting biodiversity.

The Species Concept in Systematics

The modern biological or, more strictly, genetical concept of a species is a group of interbreeding organisms, genetically isolated from other such groups. The definition of the category species has long been one of the major problems of taxonomy. It is because of two reasons:

1. Because of the congruity of lingering typological concepts with the nature of evolving species.

2. Because evolutionary species may have changing characters and are only gradually differentiated in phylogeny.

For evolutionary study and descriptive purposes, many kinds of variation within species come in to consideration, but the only regular intra specific taxon is the subspecies. Subspecies are widely but not universally useful and their definitions yield to the same sort of criteria as for dividing other phylogentic continuance.

Super Species

According to Mayr (1931, 1942) Linsleg and Usinger (1953),“A super Species is a monophyletic group of very closely related and largely or entirely allopatric Species”.

Super species are, in other words, groups of populations that seem on other grounds (morphology, ecology etc.) to have passed beyond the point of potential interbreeding and to have acquired separate evolutionary roles. They are so by the more conclusive evidence of remaining separate when sympatric. It is to be assumed that they are still near the critical point of specification, near a definitive isolation. They are nascent species that will, if they survive, collectively form a subgenus or eventually a genus but have hardly get reached that degree of divergence.

They are not given special names; the Rules of Nomenclature make no provision for that usual designation and they are mostly known by the name of an included species and are in fact super species.

7.1 Conducive Soils

Without a conducive environment, plant disease does not occur. Soils that favour the disease/ and the pathogen are generally referred to as conducive soils. Inoculum of powdery scab is the either the spore ball (an aggregation of thick walled, tough, resting spores, comprising an average of 700 spores) or the swimming spore (zoospore) that each spore of the spore ball releases. Spore balls of powdery scab have been shown to persist for long periods (Brierley et al., 2008). Exactly, how long they can survive has not been fully determined, but experimentally and anecdotally, it is much longer than a typical rotation. Inoculum may be seed-borne or soil-borne and whatever the source spore balls are able to cause infection and disease. Seed tubers may carry spore balls within powdery scab lesions or may carry spore balls symptomlessly where they have been picked up from adjacent infected tubers or contaminated machinery (e.g. on grading lines). In addition, recently, it has been found that tubers may be latently infected. That is where tubers are infected but symptoms are not expressed. Latent infections may be associated with conditions that are unfavourable for disease development, such as sub-optimal temperatures.

i. Soil Moisture: A high soil moisture content both encourages swimming spore release and facilitates movement to the host. It is generally accepted that swimming spores are unable to move through the soil without free water within the soil matrix (i.e. soil saturation). Many studies confirm the importance of free water in soil as a requirement for infection. The occurrence of wet soil conditions prior to tuber initiation, enabling inoculum multiplication, has been cited as important for high levels of powdery scab. Alternatively, prolonged wet soil conditions after tuber initiation can lead to high levels. In experiments investigating soil moisture, there is disagreement over the importance of constant versus fluctuating soil moisture conditions in powdery scab development. However, it is difficult to make clear comparisons because soil moisture levels have not always been measured and factors that may affect disease development (e.g. soil type, initial inoculum level) will have differed from experiment to experiment. Some studies have shown that constant high soil moisture has suppressed powdery scab development possibly due to low oxygen/high carbon dioxide levels rendering swimming spores inactive.

Introduction

The development of insecticide resistant populations of insect-pests, evidence of resistance, resurgence and environmental concerns have led to increased research for the alternative strategies to pesticides for control of damaging pest populations. Classical biological control and the success in that area are important and provide background and encouragement for increased efforts in the manipulation of natural enemies. Methods for manipulation of natural enemies for the purpose of reducing herbivore populations and alleviating plant stress include conservation and augmentation, habitat management and genetic manipulation.

Virtually all pest populations are affected by natural enemies to some extent. In many cases, natural enemies are the primary regulating force of the pest populations. Natural controls include effects of natural enemies (predators, parasites, pathogens), other biotic (living) factors such as food availability and competition, and abiotic (non-living) factors such as weather and soil. In pest management, biological control usually refers to the action of parasites, predators or pathogens on a pest population which reduces its numbers below a level causing economic injury. Herbivorous insects and pathogens that attack pest weeds are also considered biocontrol agents. Biological control is a part of natural control and can apply to any type of organism, pest or not, and regardless of whether the biocontrol agent occurs naturally, is introduced by humans, or manipulated in any way. Biological control differs from chemical, cultural, and mechanical controls in that it requires maintenance of some level of food supply (e.g., pest) in order for the bio-control agent to survive and flourish. Therefore, biological control alone is not a means by which to obtain pest eradication.

1. Introduction
 Laboratories form the backbone of research, clinical diagnostics and industrial quality control. Good Laboratory Practices (GLP) serve as the foundation for ensuring the quality, integrity, and reliability of scientific research, particularly in different pharmaceuticals drug testing, environmental studies and chemical testing. Good Laboratory Practices (GLP) in animal husbandry and dairy research play a crucial role in ensuring the accuracy and reproducibility of scientific studies related to livestock management, dairy production animal health and promoting animal welfare. Originally developed to prevent fraud and ensure regulatory compliance, GLP has evolved in response to advancements in technology, increased regulatory demands and the growing human and animals need for sustainability in laboratory operations. Laboratory settings are inherently fluid, with regulatory frameworks and technological progress constantly reshaping the environment. Studies indicate that even minor lapses in quality control can trigger significant inconsistencies in test results, outcomes that can have serious repercussions in both clinical and research domains. Therefore, cultivating a philosophy of ongoing improvement is crucial for addressing these evolving challenges, meeting the rising demand for safe, superior dairy products and embracing innovation. This article, synthesize the latest research findings and guidelines, delve into trusted best practices and outline practical strategies for embedding continuous improvement into everyday laboratory operations. A study published in the Journal of Laboratory Quality demonstrated that the adoption of structured quality indicators significantly minimized error rates and bolstered patient safety in clinical laboratories. Their research also provided a comparative analysis of different continuous improvement strategies, including the Plan-Do-Check-Act (PDCA) cycle and Lean Six Sigma, highlighting their respective benefits in lab environments. Based on these insights, the authors advocate for a comprehensive quality management system that seamlessly integrates automation, comprehensive staff training and routine audits to enhance process efficiency. Ultimately, the findings underscore that continuous improvement is an enduring journey, one that evolves along with advances in science, technology and regulatory standards.

Introduction

Vegetables are preferable host to many insects because of their succulence and suitable nutritional status. All vegetables are attacked but degree of damage and number of pests varies depending upon the crop, variety and climate. Pest infestation in vegetables has been the main bottleneck in their economical production. The problem has more socio-economic dimensions because of rapid expansion of area under vegetables, intensive cultivation, round the year cultivation, export enhancement and health consciousness among the people.

The diamondback moth (DBM), Plutella xylostella (L.), is a major pest of brassica crops worldwide. DBM has been estimated globally to cost US$ 1 billion in direct losses and control costs. (Grzywacz et al., 2010)

Effective application of pesticides depends on many factors. One of the more important is to correctly calculate the amount of material needed. Unless you have the correct amount of pesticide in your tank mix, even a correctly calibrated sprayer can apply the wrong rate.

Manufacturers provide application rate instructions on every pesticide label. Due to the variety of ways in which these recommendations are stated (such as lbs. of active ingredient (a.i.) per acre, lbs. of formulation per 100 gal. of spray, or ozs, of a.i. per 1,000 sq. ft.) it is often necessary to adapt the recommendations to different areas and volumes, or even other units. Sometimes the amount of active ingredient must be converted to the amount of actual product. This process can be very confusing.

1). Stem Gall
Diagnostic Symptoms
• Symptom appears in the form of tumor-like swellings of leaf veins, leaf stalks, peduncles, stems as well as fruits.
• Infected veins show a swollen hanging appearance to the leaves.
• Initially the tumors are glossy which rupture later on and become rough. They are about 3 mm broad and up to 12.5 mm long.
• Badly affected plants may be killed.
• In the presence of excessive soil moisture, especially under shaded conditions, when the stem fails to harden and remain succulent, the tumors are numerous (Fig-1).
Etiology
Scientific Classification
Kingdom : Fungi
Division : Ascomycota
Class : Taphrinomycetes
Order : Taphrinales

The disease appears as tumour like swelling or galls on leaf veins, leaf stalks, peduncles, stems and on fruits. The galls on the vein give a swollen and hanging appearance to the leaves. These are elongated, looks glossy in beginning but later rupture to become rough and corky. When stems remain succulent, numerous tumours may form on them. In severe case, the plant may kill prematurely.

A. Diseases

1. Bacterial Disease: Angular leaf Spot

Occurrence & severity status

Angular leaf spot disease, also known as ‘Black arm disease’ or ‘Bacterial blight’ is a disease of cotton potentially destructive in all cotton-growing areas of the world. The disease became prevalent in the USA during the 1950s (Schnathorst et al., 1960) and in India in the 1970s (Verma, 1986). In the USA, losses of between 34 and 59% were reported (Leyendecker, 1950; Bird, 1959). In India, losses of 5-20% were common in crops (Verma and Singh, 1971). Late and very late sowing of crops resulted in more yield reductions (Meshram and Raj, 1992). In general, losses due to bacterial blight in India are ranged between 1% and 27% depending on the cultivar and crop age (Mishra and Krishna, 2001). In Africa, data on crop losses is available for only a few countries. In Sudan, losses of 20% were common from severe infection (Last, 1960). However, nowadays, due to the wide availability of resistant varieties, its importance has been declined, with certain deviations where proliferation of new races has occurred as in Australia (Anonymous, 1980).

Anthracnose
Diagnostic Symptoms
• Pathogen infects the seedlings and produces small reddish circular spots on the cotyledons and primary leaves.
• Lesions develop on the collar region, stem may be girdled, causing seedling to wilt and die.
• In mature plants, the fungus attacks the stem, leading to stem splitting and shredding of bark.
• Most common symptom is boll spotting. Small water soaked, circular, reddish brown depressed spots appear on the bolls.
• The lint is stained to yellow or brown, becomes a solid brittle mass of fiber.The infected bolls cease to grow and burst and dry up prematurely(Fig-2).
Etiology
Scientific Classification
Kingdom : Fungi
Division : Eumycota