eChapters

The coral reef ecosystem is one of the most diverse ecosystems, which is housing for an amazing diversity of organisms and estimation of species richness ranges from 650 000 to over 9 million. For this reason, coral reefs often are referred to as the “rainforests of the ocean”1.Prokaryotes represent overriding life form on the planet and are almost certainly the most diverse component of coral reef communities2. Corals have been known to harbour many different species of bacteria.

The rise in the number of drug-resistant pathogens and the limited success of strategies in providing new agents indicate an uncertain forecast for future antimicrobial therapy. So it is critical that new groups of microbes from unexplored habitats be pursued as sources of novel antibiotics. Marine actinomycetes serve as a logical target given the historical significance of their terrestrial counterparts in antibiotic production. Isolation strategies directed towards new marine-derived actinomycetes have been lacking, but it is clear that such procedures will increase the understanding of marine bacterial diversity and yield many novel marine natural products. Though recent literatures report the isolation of novel class of actinomycetes from marine sediments and sponges, reports on actinomycetes associated with corals are very scanty. Therefore in this study we attempted to characterize the actiomycetes diversity associated with the coral Acropora digitifera from the Gulf of Mannar, Southern coast of India. The antibacterial potential of the isolated actinomycetes was also investigated.

Explant

The tissue obtained from plant to be cultured is known as Explant. It may include the parts of shoots, leaves, stems, roots, flowers and callus.

Maintenance of Aseptic Environment

All culture vessels, media and instruments used in handling tissues as well as the explants must be sterilized. The importance is to keep the air surface and floor free of dust. All operations are carried out in laminar air-flow, a sterile cabinet.In general, the methods of elimination of these sources of infection can be grouped under different categories of sterilization procedures: 

I. CHALLENGES TO CYBERSPACE

The problems and prospects of copyright and information technology need to be deliberated in the context of present day jurisprudence. The subject is referable to the extensive use of information technology all over the world which has resulted in enhanced efficiency, effectiveness and optimum use of resources. The copyright law is concerned with the negative right of preventing copying of the physical material in the field of literature and arts. Trade and Merchandise Marks Act protects the patent, trade mark and design giving the registered proprietor an exclusive right to the registered material. The prohibition contained in rights in patent and copyright extend to the unauthorised manufacture or reproduction, so long as the exclusive right rests. Copyright has been held to be not the mere creature of the statute but a natural and civil right. The moral basis of the copyright is that the man is entitled to the fruits of its mental faculties as much as he is entitled to the fruits of his mechanical labour. The law rests on the English Commandment - thou shall not steal. It does not permit one man to make a profit and appropriate himself what has been produced by the labour, skill and capital of another. Blackstone in his commentaries Vol.II at page p.406 has stated:

There is still another aspect of property and this is the right which an author may be supposed to have in his own original literary compositions: so that no other person without his leave may publish or make profit of the copies. When a man by the exertion of his rational powers has produced an original work, he seems to have clearly a right to dispose of that identical work as he pleases and any attempt to vary the disposition he has made to it appears to be an invasion of that right.

INTRODUCTION
 
Environment and ecological set up is maintained by the climatic conditions, presence and compositions of gases present in them, humidity level, temperature and the pollution. These conditions are responsible for the emerging of diseases in the environment. The diseases in plants, animals and human beings are due to the factors that affect the ecology. This also depends on the organism whether they are susceptible or resistant to the specific disease. This means the genetic level of the organism is an important factor.
Plant pathology or phytopathology is the study of diseases in plants. The disease evolution may be due to the climatic condition, humidity level, temperature and the genetic character of the plant and the pathogen. The parasitic adaptation of microorganisms to be plant pathogens includes acquisition of the following three abilities: 1) ability to enter into a plant, (2) ability to overcome the resistance of the host and (3) ability to evoke disease.

Techniques have been developed to produce nanotubes in sizeable quantities, including arc discharge, laser ablation, high pressure carbon monoxide (HiPCO),andchemicalvapor deposition (CVD).Mostof these processes take place in vacuum or with process gases. CVD growth of CNTs can occur in vacuum or at atmospheric pressure. Large quantities of nanotubes can be synthesized by these methods; advances incatalysis and continuous growthprocessesare making CNTs more commercially viable.

Strength

Carbon nanotubes are the strongest and stiffest materials yet discovered in terms of tensile strength and elastic modulus respectively. This strength results from the covalent sp² bonds formed between the individual carbon atoms. In 2000, a multi-walled carbon nanotube was tested to have a tensile strength of 63 gigapascals (GPa). (This, for illustration, translates into the ability to endure tension of 6300 kg on a cable with cross-section of 1 mm².) Since carbon nanotubes have a low density for a solid of 1.3 to 1.4 g·cm”³, its specific strength of up to 48,000 kN·m·kg”¹ is the best of known materials, compared to high-carbon steel’s 154 kN·m·kg”¹. Under excessive tensile strain, the tubes will undergo plastic deformation, which means the deformation is permanent. This deformation begins at strains of approximately 5% and can increase the maximum strain the tubes undergo before fracture by releasing strain energy.

A. Somatic Embryogenesis
 
In plant tissue culture, the developmental pathway of various well organised, small embryoids resembling the zygotic embryos form the embryogenic potential somatic cell of callus tissue or cells of suspension cultures is known as somatic embryogenesis. The capability of somatic cell of a culture to produce embryoids is known as embryogenic potential.

Embryoid: Embryoid is a small, well organised structure comparable to the sexual embryo, which is produced in tissue culture of dividing embryogenic potential somatic cells.

The dream of having genomes completely sequenced is now a reality. The complete sequence of many genomes including the human one is known. However, the understanding of probably half a million human proteins encoded by less than 30’000 genes is still a long way away and the hard work to unravel the complexity of biological systems is yet to come. A new fundamental concept called proteome (PROTEin complement to a genOME) has recently emerged that should drastically help to unravel biochemical and physiological mechanisms of complex multivariate diseases at the functional molecular level. Proteomics involves the systematic study of proteins in order to provide a comprehensive view of the structure, function and regulation of biological systems. Coupled with advances in bioinformatics, this approach to comprehensively describing biological systems will undoubtedly have a major impact on our understanding of the phenotypes of both normal and diseased cells. Initially, proteomics focused on the generation of protein maps using two-dimensional polyacrylamide gel electrophoresis.

Experiment - 1 
Aim: Mobilization of recombinant Ti plasmid (with gene of interest) from  
(E. coli) to an Agrobacterium tumefaciens strain. 

Principle: Due to ease of cloning and harvesting plasmids, E. coli is most popular for maintenance of plant transformation vectors. Consequently, the plant transformation vector with cloned gene of interest is mobilized to recipient Agrobacterium strain harbouring vir plasmid. Plasmid are closed, circular DNA molecules that are able for autonomous replication with a host cell. 

Electrophoresis is a method used to separate charged particles from one another based on differences in their migration speed. In the course of electrophoresis, two electrodes (typically made of an inert metal, e.g. platinum) are immersed in two separate buffer chambers. Gel electrophoresis is a technique used to separate molecules based on physical characteristics such as size, shape, or isoelectric point. A gel is composed of agarose or polyacrylamide. Agarose is used for separating DNA fragments in size range of 100bp to 20kb. Polyacrylamide is preferred for smaller DNA fragments. Separation is achieved by moving the negatively charged nucleic acid molecules through agarose matrix with an electric field. Rate of migration of DNA molecules is inversely proportional to their molecular weight. Smaller molecules move faster than larger ones. But conformation of the DNA molecule is also an important factor. Conformations of a DNA plasmid that has not been cut with a restriction enzyme will move with different speeds such as: supercoiled plasmid DNA will move fastest followed by linearised DNA, while open circular DNA will move at the slowest pace. To visualise DNA, gels are stained with ethidium bromide which intercalates in DNA and fluorescse under UV.

Introduction

Since the onset of human civilization molluscs have a tremendous impact on Indian tradition and economy. In India, molluscs have been in great demand as ornaments, currency, as popular panacea for illnesses and as mascot for ward off evil spirits in olden days. Now, molluscs have assumedgreater significance in our industrial, technological and aesthetic aspects of life, in addition to edible utility. Several species of gastropods and bivalves are traditionally fished for food and shell from time immemorial. About 80,000 - 1, 00,000 species of molluscs are recorded from the world over and a total of 3271 species are recorded from India. They are represented in 220 families and 591 general and the spectrum comprise of 1900 gastropods,1100 bivalves,210 cephalopods,41 polyplacophores and 20 scaphopods (edible and ornamental) and 14 species of cephalopods are exploited on commercial basis in India(Appukkuttan et al.,1989). It is difficult to categories shells satisfactorily according to their uses as many are collected for several purposes. The main categories are shown in the Table-1.

Nanosensors are any biological, chemical, or sugery sensory points used to convey information about nanoparticles to the macroscopic world. Their use mainly include various medicinal purposes and as gateways to building other nanoproducts, such as computer chips that work at the nanoscaleand nanorobots. Presently, there are several ways proposed to make nanosensors, including Top-down and bottom-up design, top-downlithography, bottom-upassembly, and molecular self-assembly.

Predicted applications

Medicinal uses of nanosensors mainly revolve aroundthe potential of nanosensors to accurately identify particular cells or places in the body in need. By measuring changes in volume, concentration, displacement and velocity, gravitational,electrical, and magneticforces, pressure, or temperature of cells in a body, nanosensors may be able to distinguish between and recognize certain cells, most notably those of cancer, at the molecular level in order to deliver medicine or monitor development to specific places in the body. In addition, they may be able to detect macroscopic variations from outside the body and communicate these changes to other nanoproducts working within the body.

Introduction

Use of acid/base is common in laboratories for experiments like titration and proper safety in their handling laboratory is necessary. In this chapter we will briefly discuss about the safety measures necessary to be adopted while using acids/bases in laboratory for any experiment.

Handling of Strong Acid/Base

There are four major points that need to be taken care of while working with strong acids or bases that might be quite harmful if any accident happens.

1. Protect Yourself

Wear a lab-coat and acid-resistant gloves: Always use lab-coat/apron and make it sure that the sleeves properly cover your arms. More importantly, use gloves made of acid-resistant materials and also wear shoes to protect your feet while wearing long-pants/jeans. Female with long hair, must tie her hair properly (with rubber band) to avoid any disturbance caused by appearance in between.

Wear safety goggles: It is important to wear safety goggles to protect your eyes using larger and fitting goggles that cover front as well as sides of your eyes. Always use properly fitting and adjustable goggles because smaller/ loose goggles may not protect the areas around your eyes against accidental acid spills and it may fall down from your face, if it is too loose.

Locate emergency wash area: There must be an emergency washing area nearby the work place or laboratory containing lab spill management kits. All the workers in the laboratory must be aware of using the kits and emergency plans.

Neutralize acid: Don’t panic even if an acid or chemical spill happens. Stay calm and act as quickly as possible. In case an acid spills, neutralize it by using sodium bicarbonate so that they can be cleaned and disposed safely. If acid comes in contact of skin, wash it off under running tap water but do not use/ apply sodium bicarbonate on skin.

The societal implications of nanotechnology are the potential benefits and challenges that the introduction of novelnanotechnological devices and materials may hold for society and human interaction. The term is sometimes expanded to also include nanotechnology’s health and environmental implications, but this article will only consider the social and political implications of nanotechnology.

As nanotechnology is an emerging field andmostof its applications are still speculative, there is much debate about what positive and negative effects that nanotechnology might have.

Beyond the toxicity risks to human health and the environment which are associated with first-generation nanomaterials, nanotechnology has broader societal implications and poses broader social challenges. Social scientistshave suggestedthatnanotechnology’s social issues should be understood and assessed not simply as “downstream” risks or impacts. Rather, the challenges should be factored into “upstream” research and decision making in order to ensure technology development that meets social objectives.

Nanotechnology, which deals with understanding and control of matter at dimension of roughly 100 nm and below, has a cross sectoral application and an interdisciplinary orientation. At this scale, the physical, chemical and biological properties of materials differ from the properties of individual atoms and molecules or bulk matter, which enable novel applications. Nanotechnology research and development is directed towards understanding and creating improved materials, devices and systems that exploit these properties as they are discovered and characterized

There are many applications of nanotechnology such as in the area of medicine, chemistry and environment, energy, agriculture, information and communication, heavy industry and consumer goods. The alleged potential of this technology has garnered the attention of both developed and developing countries across the globe. The US National Science Foundation (NSF) has listed it as one of six priority areas; it is one of the themesin the EU Framework Program for Research and Technological Development in Europe; and it has been the focus of research in countries worldwide.

A laboratory is essential for research work in science and development. Most of the research institutes have dedicated laboratories for researchers and students to conduct experiments, perform research work, as well as to provide hands-on learning/training to students. There are certain rules and regulations laid down by the laboratory in-charge which need to be followed strictly for safety purposes. Some of the laboratories keep ‘safety manual’ for researchers to read before entering into the laboratory to conduct experiments. Whenever safety is compromised in a laboratory, there is increase in risk of unwanted incidents in the laboratory. Storing food/beverages in the same refrigerator where laboratory chemicals are kept may lead to disastrous effects on health. This chapter aims to provide instructions in brief on the things to be performed (Do’s) before and after entering onto a laboratory as well as the things never to be done (Don’ts) in a laboratory for the safety reasons.

Good Laboratory Practices (Do’s)

• P Wear apron/labcoat while working in the laboratory.
• P Use gloves/respiratory mask/fumehood while handling toxic/volatile/inflammable chemicals/reagents.
• P Use pippet or pippetor for safety in transfer of solutions.
• P Protect eyes, face and naked parts of the body from UV radiations. Use safety goggles or face mask/apron.
• P Keep your eyes away from Liquid Nitrogen and use cryogloves while handling it.
• P Arrange all the necessary materials/solutions before starting the experiment.
• P Periodically fumigate/ozonize culture and inoculation rooms.
• P Autoclave all contaminated materials before discarding.
• P Pre-treat gel or solution containing Ethidium Bromide (EtBr) before discarding into laboratory waste-disposal bin, and use gloves while handling them.
• P Burn all the transgenic plant materials in an incinerator after taking necessary observations.
• P Make entry in the designated log-book and clean the instrument after using it properly.
• P Switch-off the instrument after use or when not in use.
• P Wash hands with soap and remove the labcoat before leaving/going out of the laboratory7.
• P Ensure that switches for fans/lights, and water taps are off while leaving the laboratory.
• P Follow the biosafety guidelines suggested for handling and disposal of the hazardous chemical.

2.1     Regulation of the Cell Cycle 
    
2.2     Mitosis
    
2.3     Meiosis

8.1 Sub Cloning
    
8.2 Cloning into a Yeast Artificial Chromosome (YAC)
    
8.3 DNA Libraries

1.     Maintaining Embryonic Stem (ES) Cells
    
2.     Establishing ES Cells
    
3.     Freezing of ES Cells
    
4.     Thawing of Frozen ES Cells
    
5.     Production of Transgenic using ES Cells
    
6.     MTT Assay for Cell Viability

4.1 Introduction

More and more industrial applications require self cleaned surfaces, water repellent, anti-dirt pickup and many other specific surface requirements. Introduction of nanotechnology has changed the coating scenario drastically. Hard, anti-scratch, hydrophobic coatings are achieved by the addition of small amounts of nano-pigments which help in creating hydrophobic surface. It is also possible to grow certain nano-fibers which on chemical treatment give surfaces which can either attract water or repel it. It is also possible now to create self healing coatings which can repair surface once they are damaged by scratch. Capacitance coupler pads have been devised to reach those corroding areas which are not covered by other corrosion protection methods. Stringent requirements of many modern industrial application resulted in developing coatings which can give special surface properties such as high hardness, scratch resistance, hydrophobicity, anti-dirt pickup etc.  This brief article presents a few new researches which provide one or more special properties to the surface.