eChapters

Hybrid vigour is used as a synonymous of heterosis. In 1910, the term heterosis was first used by Shull who defined this phenomenon as the stimulus of heterozygous, and in his word, it has been the “interpretation of increased vigour, size, fruitfulness, speed of development, resistance to insect-pests and diseases or to the climatic rigors of any kind manifested by the out breeding organism as compared with corresponding inbreds as a specific result of the unlikeliness in the constitution of uniting parental gametes”. This definition is often interpreted as not implying a genetic basis for heterosis, because the definition basically describes the phenotypes that result from the crossing of two different inbred lines. Generally, heterosis is manifested as an increase in vigour, size, growth rate, yield, or some other characteristics but in some cases, the hybrid may be inferior to the weaker parent. This also represents as heterosis (average heterosis), and if heterosis is estimated over the superior parent, such an estimate is sometimes referred to as heterobeltiosis, hence, authors feel “heterosis refers a biological phenomenon in which the F₁ population obtained by crossing of the two genetically dissimilar gametes or individual shows increased or decreased vigour over better parent or over the mid-parental value. Earlier, Power (1944)also suggested that the term heterosis should be used only when the hybrid is either superior or inferior to both the parents. Other situation should be regarded as partial or complete dominance. It can be easily explained with the help of Table 5.1.

1.1 Introduction
The concept of invention is the fundamental requirement for design thinking. Since the birth of mankind, people started inventing many concepts, which are mainly observations of facts and innovation of ideas for producing products that are useful to the society. The design thinking requires unconventional thinking to design processes for maximal operational efficiency of manufacturing the products, which give maximum satisfaction to customers with more value for money. Hence, the team that is involved in the design thinking projects may gain the required skills by knowing several inventions of the past. Hence, a review of inventions is presented in this chapter.
1.2 Tracing Inventions
The content at https://www.explainthatstuff.com/timeline.html gives a complete account of inventions starting from 4–5 billion years ago up to 2022. The article on solar cell energy gives an account of the sun started producing energy. About 1.2 million years ago, humans invented fire, which has been further innovated for biofuels, candles, IC engines, aviation engines, etc. In the 7th century B.C., ants were killed by burning in the heat produced by concentrated sun rays using magnifying lens. Greeks and Romans utilised burning mirrors to light candles during religious ceremonies in the third century B.C. About 3.5 million years ago, stone, wood, antlers, and bones were used by humans to make first kind of tools. These were further improved to make tools for machines. About 4000 BCE back, iron was used to make decorative ornaments. About 3500 BCE, people invented the concept of wheel, which brought quantum revolution in transportation.

History and development of seed Industry in India can be discussed under two heads

1. Pre-independence development.
2. Post-independence development.

1. INTRODUCTION

In plants, seed dormancy is controlled by temperature, light and hormones. Unlike animals, which secrete hormones from special glands, hormones are always present in plant cells. Each plant hormone plays multiple roles, depending on the site of action, the life stage of the plant and the hormone’s concentration. A plant hormone is any chemical that is produced in one part of the plant that has a targeted function elsewhere. Certain hormones induce and keep seeds in a dormant state, while others cause seeds to break dormancy and initiate germination They are stored in regions where stimulus are and then released for transport through either phloem or mesophyll when the appropriate stimulus occurs. These are chemical messengers influencing many patterns of plant development

The first theory is that the five classic plant hormones, auxin, cytokinins (CKs), gibberellins (GAs), ethylene, and abscisic acid (ABA), plus the new plant hormones, brassinosteroids (BAs), and salicylates or salicylic acids (SAs) can be gathered into three groups. These are growth hormones, stress hormones and shock hormones. Auxin and CKs are growth hormones. Ethylene, GAs, and brassinosteroids are stress hormones. ABAs and SAs are shock hormones. All three types of hormones are similar in that they fall within the classic definition of an intercellular hormone. They are made by a cell and are meant to affect the behavior of other cells, either in nearby tissue or at the opposite end of the plant.

ABA, also known as abscisic acid plays a direct role in dormancy release and germination. Ethylene and the gibberellins group of hormones are indirectly involved.

A hybrid is the first generation progeny of a cross between two genetically different identical inbred lines. The individual lines are known as inbreds.  Ineffective cross-pollination is a major constraint in a commercial production of hybrid seeds in many crop species. In such crops manual pollination is the way to produce hybrid seeds. Eg. Cotton. In the case of rice it is highly self-pollinated crop and cross-pollination is a big problem. The increased vigour, uniformity and yield of F1 hybrid have been exploited in most crops where the pollination system allows for convenient and economic cross hybridization.  This system is called breeding tool in exploiting the hybrid vigour.

The term heterosis from Greek means hetero different, osis-condition was coined by skull (1914).

Heterosis or hybrid vigour, refers to the increase or decrease in vigour of off spring (hybrid) over parents. Usually, theses two terms are used synonymous.   But hybrid vigour refers to increased vigour; Heterosis both increased and decreased vigour.

Superiority of the hybrid as hybrid vigour and the mechanism by which this superiority is developed is heterosis (Rangaswamy, 1998).

Hybrid Seed Production Technology At a Glance

1. TECHNIQUES OF HYBRID SEED PRODUCTION

1.1. Field crops

Table 1: Techniques of hybrid seed production in field crops

Heterosis

The superiority of F₁ hybrid over both its parents in terms of yield or some other characters or heterosis is increased vigours, growth, yield or function of a hybrid over the parents, resulting from crossing of genetically diverse organisms. The term heterosis was first coined by Shull in 1914. Generally heterosis manifested as an increase in vigour, size, growth, yield or some other characteristics. But in some cases, hybrid may be inferior to the weaker parent this is also regarded as heterosis.

INTRODUCTION

Genetic engineering (GE) and genetically modified organisms (GMOs) provide powerful tools for sustainable development in agriculture, healthcare and many other industries. GMOs are those which were genetically engineered in a laboratory by incorporating a small foreign DNA fragment carrying a gene of interest into the native DNA of the organism. The foreign gene is attached with the necessary regulatory elements to help its expression in the new genetic environment. Genetically modified (GM) crops currently account for some 16 percent of the world’s land planted with soybean, maize, cotton and canola. The global demand for food is increasing because of the growing world population and decreasing arable land. At the same time food and agricultural systems have to respond to several changes such as increasing international competition, globalization and rising consumer demands for improved food quality, safety, health enhancement and convenience. Modern biotechnology involving the use of rDNA technology/genetic engineering has emerged as a powerful tool with many potential application for improving the quantity and quality of food supply. Foods derived from genetically modified crops, commonly referred to as genetically modified food and food ingredients have already become available worldwide with aim of enhancing productivity, decreasing the use of certain agricultural chemicals, modifying the inherent properties of crops, improving the nutritional value or even increasing shelf life. Results of DNA modification may not be limited only to the particular characteristics of the replaced gene. It is therefore important to ensure that when these organisms are released into nature they do not harm the environment or human health [EFSA, 2006]. Such concerns have led to broader interests in the theme of risk assessment in the release of GMOs. A cautious approach is necessary to assess environmental risks which may occur due to introduction of recombinant organisms in the natural environment [Johnson et al., 2007].

Vegetable crops, known as protective foods, are important for the healthy diet providing vitamins, minerals, fibre, amino acids and other bioactive compounds. Improvement in vegetable crops is inevitable for better yield, pest or disease resistance, morphological characters, nutritive quality, to adapt with environmental stress, climate change, offseason production, satisfying varying consumer preference etc. Vegetable crops comprise of a large number of species and are rich in diversity. Diverse genetic resources are pre-requisite for any crop improvement programme and vegetable improvement is carried out using exotic introductions, indigenous collection and hybrids/varieties by different breeding systems. Characterisation of genotypes is the description of germplasm giving information on heritable characters so that promising one can be utilised in breeding programme which is the best option for higher yield and other qualities. The morphological, physiological and molecular (biochemical and DNA) traits are called qualitative descriptor and yield, pest/disease resistance, stress tolerance etc are quantitative descriptors that are easily influenced by the environment factors. Apart from the higher production and resistance to biotic and abiotic factors, nutritional traits, flavour, processing qualities that increase the food value is also important in improvement programme of fruits as well as vegetables.

Genetic resources of vegetables available at international and national levels are characterised, evaluated and conserved. With the high diversity of vegetable crops, characterisation and evaluation of genetic resources become a stupendous responsibility requiring extensive infrastructure facilities and varying methods of evaluation (Srivastva, 2012). Genetic resources are characterised on highly heritable traits expressed across the environment. Apart from morphological characterisation, biochemical and molecular characterisation is also conducted that are useful for the identification of biotic and abiotic stress parameters, nutritional and processing quality. Genotype characterisation can be done efficiently using potential of biochemical and molecular markers that help to set up the breeding programme.

The use of seed processing equipments helps in improving the seed quality by inducing uniformity of physical properties of seeds. This help in achieving optimum plant population and desired economic yield. In certain crops like soya bean, standard seed processing may not give desired seed quality because of sensitivity towards moisture. As general practice seed need to be dried to its safe moisture content of 9 before processing. But in case of soya bean lower seed moisture may result higher mechanical damage after standard seed processing. Drier seed are more vulnerable for mechanical damage. In this practical w try to explore the importance of moisture in seed processing and also need of alternative processing equipments like spiral graders to minimize mechanical damage.

1. Seed is the key ingredient in establishment and expansion, diversification and improvement of crops/and crop husbandry.

2. Seed is the most effective and efficient means of crop propagation.

The importance of vegetables in human nutrition is now well known all over the world. Vegetables are rich and comparatively cheaper source of minerals and vitamins. Their consumption in sufficient quantities provides taste and palatability, increases appetite and provides fair amount of fibre. Besides, they provide many specific chemical substances, which are essential for growth, reproduction and for the maintenance of good health and also beneficial in protecting against some degenerative diseases (Prior and Cao, 2000; David, 2005; Elison and Levin, 2006).

Apart from their nutritive value, vegetables probably do more than any other groups of food to add colour, texture and flavour to our daily diet. Majority of the population in India is vegetarian, and thus, vegetables form an essential item of food for both the rich and the poor people. National Nutrition Monitoring Bureau (1997) surveys indicated that the daily intake of most foodstuffs in Indian households, except for cereals and millets, is much below the recommended dietary allowances (RDA). The diets provided negligible amount of protective foods. It was found that consumption of green leafy vegetables (< 10 g) and other vegetables (70-80 g) per day, which are rich source of micronutrients, are woefully inadequate. However, as per the RDA, an adult man should consume 200 g roots and tubers, 100 g green leafy vegetables and 100 g other vegetables (Table 1) in a day. In addition, fresh fruits (100 g) as available in different seasons should be consumed regularly for the prevention of chronic diseases (NIN, 1998).

In vitro cloning is a vegetative propagation performed in the Plant Tissue Culture system. In vitro micropropagation cloning propagation is mostly applied to the vegetatively propagated plants and in particular in ornamental, fruit and in a few orchard crops and in vegetable crops besides in many forest tree species.

Micrografting is a method to produce virus free, viroid free and disease free grafts that are clonally propagated. This method is an aid to mass multiplication. In vitro grafting is applied to difficult to root clones. Micrografting is performed to understand incompatibility prediction between the two grafting partners, virus indexing, deduction of latent virus, safe germplasm exchange and to do grafting functions throughout the year. It is not season specific. Protocols for micrografting are available for almond, pistachia, olive, prunus, grape, mulberry, cashew, citrus, peach, pear, avocado, hazlenut, walnut, chestnut and grape fruit (Hussein et al., 2014).

Incentives are a powerful stimulus to transfer of technology. They can encourage researchers to get their results to market, a new career path for many of them. They can create a culture that attracts and retains entrepreneurial staff, scientists, students and technology transfer professionals (TTPs) that view the university as a career path and a vehicle for making a contribution to society. Working in a pro-entrepreneurship team of colleagues can also lead to getting people to think in terms of making a connection between their work and its application. Incentives can be short-term or long-term in nature, and can be tailored to individual or collective requirements. As it is likely to be challenging for universities to design incentives that cater to every researcher’s or TTP’s desire, they can design incentive programs to cater to various aspects of human. Nature.
12.1 Why incentives matter in this ecosystem
Incentives can be either financial and non-financial. These are needed to ensure that researchers and TTPs remain motivated, aligned with institutional goals, and committed to the long-term process of technology transfer and commercialization. Incentive programs serve several important purposes:
• Motivation: Incentives energize individuals to pursue innovation and commercialization, often over long- and uncertain-time horizons.
• Retention: By offering recognition, rewards, and career advancement opportunities, institutions can retain high-performing researchers and skilled TTPs.
• Alignment: Well-designed incentives ensure that the personal goals of stakeholders align with institutional and societal objectives.

Introduction

The seed industry has witnessed a substantial change in the 20th century, with farmers relying on purchasing seeds from market with better traits rather than relying on seeds from previous season’s harvest. Developments in seed technology have increased the momentum of the industry’s growth, and the introduction of genetically modified crops has further boosted the seed market. The value of global seed market has tripled since 2000 and reached US$ 54 billion in 2014 (Indian Seed Market (pdf), www.icfa.org.in).

Abstract

Insect pests, fungi, bacteria and other injuries are found in all types of environment and affect the growth, production and survival of both plants and animal species in one way or other. Similarly a large number of insects belonging to different orders, families and genera feed on pods and seeds in natural/ during storage and cause injuries. Regeneration failure in several broad leaved and conifers in India and other countries by heavy insect attack in the natural stands at the time of inflorescence and seed formation and on the ground after seed shedding causes heavy loss to number of afforestation programmes. Several methods like chemical, cultural, natural and biological are available for reduction in loss caused to seeds by insects. Generally, earlier the control measure, the smaller the destruction. Forest seeds can be stored safely by taking some precautions before their final storage, viz. inspection of the seeds for their moisture content, visual examination of cleaning method, scanning through soft X-ray technique, thermotherapy or treatments with chemicals, etc. The present chapter has covered review regarding damage caused to seeds by different insect pests and their management options.

Onion production is constrained by insect pests and diseases that damage seedlings, foliage, roots and bulbs and reduce both yield and market quality. Important pests include onion thrips, leaf miners, cutworms, armyworms and onion maggots. Major diseases include damping-off, basal rot, downy mildew, purple blotch, white rot and pink-root rot. Some insects also transmit damaging viral diseases. This chapter presents integrated cultural, biological, botanical, behavioural and chemical strategies for managing these threats. Crop rotation, sanitation, healthy planting material, proper spacing, resistant varieties, traps, barrier crops, beneficial microorganisms, natural enemies and need-based pesticides are discussed as components of sustainable crop protection and resistance management.

India is contributing about 10% of the world’s vegetables, and in terms of production, the country stands second after China. The existing area under vegetable cultivation in India is around 6.89 million hectare with a production of about 96.54 million tonnes. There will be a demand of 151-193 million tonnes of vegetables in India by 2030 (Dhaliwal et al., 2006). There are extensive crop losses in vegetable crops due to increased insect infestations. Since vegetables are grown round the year, there is carry over of insect-pests across the seasons and also from sowing until harvesting. Vegetables also invite more pest problems because of their cultivation under high fertility conditions leading to high plant succulence. High yielding varieties and hybrids are further more prone to the attack of insect-pests. Insect infestation affects the quality and market value of vegetables adversely and it is estimated that 30-40% of the total production is lost due to the attack of pests (Lal et al., 2004). A large number of pesticides are being used repeatedly to manage the insect-pests in India. Indiscriminate use of pesticides has led to many problems like toxic residues in edible parts of the vegetables, adverse effects on non-target organisms and beneficial insects, resurgence of secondary pests and development of resistance in major pests to pesticides and also environmental pollution. Therefore, latest approach has been to minimize the use of highly toxic insecticides by integrating different strategies of pest control like use of biological control agents, pesticides of plant origin, insect resistant varieties and other cultural practices. In this chapter, efforts have been made to highlight the distribution, host range, identifying characters, biology and nature of damage of important insect-pests of vegetables and also the methods of their management crop or pest wise.