eChapters

PPEs are the personal protection equipments which protect the personnel against some hazards in the shop floor. PPEs form important aspects of Environment (safe disposal of treated chemicals, dusts coming out of processing), Safety (to seed storages) and Health (personnel) (ESH) strategy of any shop floor.

1. HAND EMASCULATION AND POLLINATION

The male part of seed parent is removed by hand before anthesis to check the self pollination from the crop plants with bisexual flower having fertile male and female part. This process is known as emasculation. These emasculated flowers are then pollinated by the pollens collected from pollinator parent to produce hybrid seed (Fig. 1). Eg. Cotton, tomato, brinjal.

1. LAND REQUIREMENTS

1. FORAGE LEGUMES

1.1. Isolation

1.1 Introduction
The concept of invention is the fundamental requirement for design thinking. Since the birth of mankind, people started inventing many concepts, which are mainly observations of facts and innovation of ideas for producing products that are useful to the society. The design thinking requires unconventional thinking to design processes for maximal operational efficiency of manufacturing the products, which give maximum satisfaction to customers with more value for money. Hence, the team that is involved in the design thinking projects may gain the required skills by knowing several inventions of the past. Hence, a review of inventions is presented in this chapter.
1.2 Tracing Inventions
The content at https://www.explainthatstuff.com/timeline.html gives a complete account of inventions starting from 4–5 billion years ago up to 2022. The article on solar cell energy gives an account of the sun started producing energy. About 1.2 million years ago, humans invented fire, which has been further innovated for biofuels, candles, IC engines, aviation engines, etc. In the 7th century B.C., ants were killed by burning in the heat produced by concentrated sun rays using magnifying lens. Greeks and Romans utilised burning mirrors to light candles during religious ceremonies in the third century B.C. About 3.5 million years ago, stone, wood, antlers, and bones were used by humans to make first kind of tools. These were further improved to make tools for machines. About 4000 BCE back, iron was used to make decorative ornaments. About 3500 BCE, people invented the concept of wheel, which brought quantum revolution in transportation.

1. SEED FORTIFICATION

It is process of enriching the seeds with bioactive chemicals for improving the germination and seedling vigour. To the known volume of seeds, one third volume of the nutrient solution is added and allowed to imbibe for short duration. The imbibed seeds should be dried under shade. The fortification treatments recommended for different crops are depicted

Varietal Seed Production Technology At a Glance

1. MIXING AND DIVIDING

The main objective of mixing and dividing of seeds is to obtain the representative homogenous seed sample for analysis by reducing the submitted sample to the desired size of working sample.

2. TYPES OF MECHANICAL DIVIDERS

2.1. Boerner divider

The principle involved in mixing and dividing in gravitational force. It consists of a hopper, a cone and series of baffles directing the seeds into 2 spouts. The baffles are of equal size and equally spaced and every alternate one leading to one spout. They are arranged in circle and are directed inward. A valve at the base of the hopper retains the seeds in the hopper. When the valve is opened, the seeds fall by gravity over the cone where it is equally distributed and approximately equal quantity of seeds will be collected in each spout. A disadvantage of this divider is that it is difficult to check for cleanliness (Fig. 1).

1. SEED MOISTURE

Seed moisture is one of the most important deciding factors of seed viability and quality during storage. Hence, determination of seed moisture content and drying to the safe moisture content is utmost important before transit and storage.

According to ISTA (1985), moisture content of the sample is defined as that loss of weight when it is dried in accordance with the rules or the amount of water collected when it is distilled. It is expressed as percentage of the original weight of sample (wet basis).

1.1. Principle

Moisture present in the seed is removed completely as much as possible without oxidation or decomposition or loss in other volatile substances by applying heat. The weight loss due to drying is estimated and the moisture content is calculated.

1. DEFINITION

Seed deterioration is defined as deteriorative changes occurring with time that increase the seed’s vulnerability to external challenges and decrease the ability of the seed to survive

1. SEED TREATMENT

It refers to the application of pesticides (fungicides, insecticides or a combination of both) to seeds before sowing and/or storage in order to protect the seeds and young seedlings from soil borne pathogens and/or storage pathogens and insects. Seeds are thoroughly mixed with required quantities of chemicals namely bavistin (carbendezim) @ 2-4 g/kg of seeds.

The decision whether to extract the seed from the fruit at a central seed processing depot or close to the site of, and soon after, collection must be made in the light of local conditions. The reduction in bulk and weight of the collected material greatly facilitates transport and for this reason the extraction of the seed from relatively bulky fruits may be desirable at the site close to the collection area. In some cases it has also been found that early extraction of the seed is essential to maintain maximum viability. The use of the sun drying to speed extraction of the seed is common for many conifers and trees with woody dehiscent fruits. However, too rapid drying of fruits may sometimes cause them to remain closed and prevent later extraction, a condition known as “case-hardening” of cones. This is true for the cones of some pines if they are collected before peak maturity. In such cases it is necessary to keep the fruits under cover, with a good circulation of air, for one or two weeks before more rapid drying is attempted.

1. INTRODUCTION

Seed health refers to the health status of a seed. Sowing healthy seeds of high quality is our concern to improve crop yields, thus increasing food production. It has a great concern to farmers and seed producing agencies where the disease is high and average yields are low and where more food is needed to feed the ever-increasing population. So, it is important to test the seeds for disease organism before they are sown in the field and to avoid harmful organisms traveling from infected to non-infected areas within a country or across international boundaries.

Seed is the primary and most critical input in any crop production programme. A quality seed alone contributes around 15-20% towards total production. The efficacy of all other inputs to increase production will be in vain if the quality of the seed is poor. Hence, use of quality seed is crucial as it appreciably increase the productivity of the crop without depending much on other inputs. This adds to the old saying in Manu Smriti good seed in good field yield abundantly .A quality seed can be defined as genetically and physically pure seeds with high germination percentage, free from seed borne pathogens and safe moisture content. This guarantees good germination, vigorous growth, and good establishment of crop in the field.

History of Seed Industry in India

Farmers dependent mostly on traditional indigenous varieties earlier and its seed requirements were met through their own farm saved seeds or through local sources. But the quality of these seed stocks was not assured, and this resulted in drastic reduction in production as well as productivity of the crops. As a result of various crop improvement programmes, improved varieties possessing high yield potential along with additional characters of biotic and abiotic resistance came into the scenario. But the availability of the seeds of these improved varieties among the farmers remained as a problem and it limited the cultivation of these varieties. This led to the development of a well-planned systemized seed production system. Government of India had framed and brought out different legislations for regulating systemized seed production. These laws are framed to make available quality seeds and planting materials to a common farmer and equip him to approach authority for justice. Seed legislations were initiated in the country by establishment of National Seed Corporation (NSC) during 1963 under Ministry of Agriculture and the seed industry was restructured through the nationals seed projects phase I (1977-78), Phase II (1978-79) and Phase III (1990-1991). These initiatives strengthened the seed industry through formulation of seed regulations, establishment of state seed corporations and seed certification agencies thereby assured the supply of quality seeds to farmers

1. PPV & FR ACT

With the signing of TRIPs agreement of the World Trade Organization (WTO), India has agreed to provide protection to plant varieties. The Government of India, therefore, enacted “ The Protection of Plant Varieties and Farmers Rights Act (PPV&FR Act)” in 2001 and the Regulations for implementing the Act were formulated in 2003.

The Ministry of Agriculture, Government of India, has been identified as the nodal agency for implementing the PPV& FR Act through an Authority known as “The Protection of Plant Varieties and Farmer Rights Authority”. The Authority came into force in November, 2005.

PPV & FR act has 11 chapters, 4 schedules and 97 sections.

Seed Sampling

The size and quantity of seed sample required for seed quality testing remains small as compared to the seed lot hence, representative samples are randomly drawn for this purpose. The process of obtaining a uniform and representative sample from a seed lot for seed quality testing is called seed sampling. The samples are prepared in accordance to ISTA rules to ensure that small size sample should represent truly and in the same proportion all constituents of seed lot.

Physical purity test determines the proportion of pure seed, other crop seed, weed seed, inert matter, moisture and germination components in the seed lot by weight in percentage in accordance to prescribed Seed Standards. It thus, helps in improving the plant stand, raising a pure crop by eliminating other crop seeds, weed seeds and disease free-seeds. Seed must not be sold until the percentage of pure seed, other crop seed, weed seed, and inert matter are in accordance to seed physical purity standards. Physical purity test is required for seed certification or seed law enforcement and it is a pre-requisite for ger- mination test.

I. FILL UPS

1. _____ is the maintenance of high seed germination and vigour from harvest until planting.
2. _____ is important to get adequate plant stand in addition to healthy and vigours plants.
3. _____ seeds can be dried to 6-10% moisture depending upon the species.
4. _____ seeds cannot be dried below 30-35% moisture and should be maintained at this temperature.

Origin

Beet root originated from Beta vulgaris L. ssp. maritima by hybridization with B. patula. Crop has site of origin probably in Europe. Earlier types were with long roots like that of carrot. Beet root, sugar beet and palak belong to species B. vulgaris and are cross compatible.

Botany

Beet root is a biennial, producing a fleshy elongated hypocotyls and a rosette of leaves in first year and flowers in second year. Upper portion of fleshy root develops from hypocotyls and basal part from tap root. Concentric rings seen in cross section of root are as a result of alternate formation of vascular tissues and storage parenchyma tissues. Root skin colour varies from orange red to dark purple red. Colour of beet root is due to presence of red violet pigments of â cyanins and a yellow pigment, â xanthin. It has extensive tap root system and tap root grows as deep as 3m. Rosette leaves develop in a close sp