eChapters

I. FILL UPS

1. _____ number of beds measuring 8 m, 0.6 m are sufficient for raising sufficient seedling for one hectare.
2. Seeds are sown singly at _____distance apart in the furrow.

Many materials can be applied to the soil as source of plant nutrients but the term fertilizer is often used to refer to relatively soluble nutrient sources with a high analysis or concentration. Commercially available fertilizers supply essential elements in a variety of chemical forms but many are relatively simple inorganic salts. Advantages of commercial fertilizers are their high water solubility, immediate availability to the plants, high concentration and low price per unit of nutrient, and the uniformity and accuracy with which specific amounts of available nutrients can be applied. Since they are relatively homogeneous compounds of fixed and known composition, it is fairly easy to calculate precise application rates and attain relatively consistent performance. This is in contrast to organic nutrient sources, which are a much greater challenge to manage because of their variable composition, variable nutrient availability and patterns of nutrient release that are greatly affected by temperature, moisture and other conditions that alter biological activity.

The solubility of commercial fertilizers can sometimes be a problem since soluble nutrients may move out of farm fields when applied in excess or large rains occur soon after fertilizer application. Soluble nutrients can be lost by leaching on well-drained soils and through tile outlets or in runoff on poorly drained soils. Denitrification can cause large losses of nitrate-N from water-saturated soils in wet springs.

Increasing soil cation exchange capacity by increasing organic matter reduces the movement and loss of some nutrients, although not nitrate-N (an anion). Management practices that synchronize nutrient availability with crop demand and uptake also minimize losses. Both application timing and the amount of fertilizer applied are important. Splitting fertilizer application into several small applications rather than a single large one is especially important to limit nitrogen leaching on well-drained sandy soils. Split nitrogen applications can also reduce nitrogen losses in runoff or from denitrification on poorly drained soils. Excess nutrient applications can be eliminated or at least significantly reduced by soil testing on a regular basis, setting realistic yield goals and fertilizing accordingly, accounting for all nutrient sources such as legumes, manure and other amendments and using plant analysis as a monitoring tool for the fertilizer program.

Increasing food need, decreasing land availability and concurrently attenuating synthetic nutrients supply envisage the use of alternate supplementary inputs for the cultivation of crops. India is among the few nations where systematic farming started thousands of years ago. It was not only the source of income but was also a way of life. Agricultural activities and the techniques adapted to suit local needs and conditions. Different farming systems were followed by the farmers in different areas according to their needs and weather conditions. The produce was usually shared with other communities of the society involved in other professions. Almost all the nutrients removed by the crops were recycled to the soil directly or indirectly (Yadav and Mowade, 2005). In economic terms, the system followed by the then farming community was highly cost effective since all the inputs needed were locally available and practically no expenditure was incurred except labour. The traditional agriculture was though less productive but self-sufficient. With the advent of modern scientific discoveries, agriculture also changed its face, and with the introduction of high yielding varieties, synthetic fertilizers and effective plant protection measures through chemicals, Indian agriculture made rapid strides in the shape of Green Revolution. As an upshot of Green Revolution, the grain production increased two and a half folds in about three decades with a marginal increase in net-area under cultivation.

India is a major exporter of vegetables with 10th position in the world. In the past, the Dexport of Indian vegetables was restricted to potatoes and fresh onions, however, now, the Government of India finds great opportunities for expanding exports of several vegetables including lettuce, fresh peppers, tomatoes, squashes, gherkins, etc. Under World Trade Organization (WTO) regime, the development of stronger seed industry and improved production technology will give India a competitive edge in global market. New opportunities and challenges are emerging every day in the dynamic and global vegetable-based industries. However, such opportunities can be harnessed only if assured quality, in terms of organic farming and reduced pesticide residues, is maintained (Shanmugasundaram, 2004).

I. FILL UPS

1. _____ is the growing of plants from meristematic tissue (or) somatic cells of superior plants on nutrient media under controlled conditions.
2. _____ is a group of undifferentiated palnt cells.
3. Explants used is _____ in shape.
4. Meristem forms _____ at its cut end on which a large number of shoot primordia develop.

Varietal Seed Production Technology At a Glance

Hybrid Seed Production Technology At a Glance

I. FILL UPS

1. The type of harvest in paddy is _____.
2. The type of harvest in cumbu is _____.
3. The type of harvest in bhendi is _____.
4. The type of harvest in brinjal is _____.

I. FILL UPS

1. The seed removal in wet fruits is known as _____.
2. The seed removal in dry fruits is known as _____.
3. _____ is used for mechanical extraction.

Mulching is a practice of covering the surface of soil with plastics, organic and non-organic materials like straw, grasses, sands, stones (boulders), synthetic plastics, etc. to reduce evaporation and to moderate wide fluctuations in diurnal soil temperature, especially in the root zone environment. It controls external evaporability and reduces energy supply to the evaporating site by cutting off solar radiation falling on the ground. Its main function is limited to control first stage of drying, which helps in improving moisture status and reducing soil temperature (Loy and Wells, 1975), besides checking seedling mortality and improving crop stand. It also suppresses weed-flora and reduces weed competition with crop for water and nutrients making them available in greater quantities for crop plants. Moreover, mulching helps in increasing downward movement of water, and its storage deep in the profiles escapes evaporation due to reduction in thermal gradients and exchange of vapours. The effectiveness of mulches in conserving moisture has generally been found to be higher under more frequency of rainfall, drought conditions and also during early period of plant growth when canopy cover remains scanty.

Most of us consider weeds to be the troublesome, competitive, aggressive, undesirable, unsightly elements of the plant world. We hate weeds since desirable plants cultivated by us are deprived of food, water, sunlight and space by these plants. They can easily colonize an area and thrive even under non-ideal conditions of growth and may affect human welfare adversely. It is perhaps due to this that the saying, when weeds win all the people lose, has come into existence.

The terminology committee of the Weed Society of America gives the simple definition of weed as a plant growing where it is not desired. King (1974) in his book Weeds of the World observed that ‘‘a plant classed as a weed in one region where it has few, if any, uses may when growing in another region, possess some very valuable uses, or in few cases may actually be cultivated’’. For instance, Bermuda grass (Cynodon dactylon) is a highly troublesome weed in crop fields, but in village pastures, it is a much sought for forage grass. Quack grass (Agropyron repens) is a very good soil binding grass on erodable non-crop lands but it is a serious weed when it infests crop fields and orchards. Campbell (1923) considered weeds as ‘honest, independent competitors for food materials in the struggle for existence’. He pointed out that the term, weed has developed in the minds of people not according to specific qualities or by a definite concept in the mind of man, but by human caprice, e.g., corn is a cultivated crop, hence, desirable plant in a corn field. However, if a corn plant grows in a Soya bean field, it is considered a weed by the Soyabean farmer. Sometimes, two persons may differ about the weedy nature of a plant at the same place and time, e.g., water hyacinth (Eichhornia crassipes) is a weed for fisherman but it is a plant of aesthetic value for a city dweller.

Thus, a corollary to the above definitions of weed is that weeds are those plants, which grow out of their place, interfere with the utilization of natural resources, prolific, persistent, resistant, competitive, harmful and even poisonous in nature and can grow under adverse conditions.

I. FILL UPS

1. A _____ is an unbranched, indeterminate inflorescence with pedicellate flowers along the axis.
2. A _____ is a type of raceme with flowers that do not have a pedicel.
3. An _____ is a type of raceme with a short axis and multiple floral pedicels of equal length that appear to arise from a common point.
4. Indeterminate simple inflorescences are generally called _____.
5. Determinate simple inflorescences are generally called _____.
6. A compound raceme is often called a _____.
7. _____ are umbels in which the single flowers are replaced by many smaller umbels called umbellets.
8. _____ is the pollen producing part of a flower, usually with a slender filament supporting the anther.
9. _____ is the part of the stamen where pollen is produced.
10. _____ is the ovule producing part of a flower.

I. FILL UPS

1. The process of eliminating moisture from the seed is called_____.
2. _____ is the common conventional method, in which drying of harvested crop is carried out in the field.
3. In _____ method the outside air is heated with the help of burner heater and circulated into the godown.

I. FILL UPS

1. The _____ is used in modern seed handling and storage systems for preliminary cleaning.
2. _____ removes large inert matter from the seeds.
3. _____ is a machine that do the rubbing action and debeard the seeds and polish the seed.
4. _____ is the basic cleaner in most seed processing plants.

I. FILL UPS

1. _____ is the step in which the seeds are allowed to attain enough water holding capacity facilitating separation.
2. _____ process helps to draw the precise difference between filled live and filled dead seeds in IDS method.
3. PREVAC stands for_____.
4. NIR stands for_____.
5. IDS stands for_____.

I. FILL UPS

1. _____ means the application of physical, biological, chemical agents to the seed in order to enhance the physical, genetical, biochemical and health qualities of seed.
2. _____ coined the term seed priming.
3. _____ is the impregnation of the needy substance into seed through imbibition phase.
4. In paddy, seed fortification is done with _____ chemical.
5. In groundnut, seed fortification is done with _____ chemical.

I. FILL UPS

1. _____ is the period during which a flower is fully open and functional, in terms of pollen maturation and dispersal.
2. Flowers with _____ anthesis generally have brightly coloured flowers to attract insects, such as butterflies.
3. Flowers with _____ anthesis generally have white or less colourful flowers.
4. _____ is the mechanism, in which the stamens and pistil of a flower mature at different times.
5. The best example for protandry is _____.
6. _____ is the mechanism in which the stigma become receptive before pollen release.
7. _____ is the process by which plant pollen is transferred from the male reproductive organs to the female reproductive organs to form seeds.
8. In Bengal gram, the method of pollination is _____.
9. Red gram is _____ pollinated crop.

I. FILL UPS

1. A seed is defined as a _____ or a reproductive unit formed from fertilized ovule, consisting of an embryo, reserve food and a protective cover.
2. A seed is defined as a mature ovule or a reproductive unit formed from _____ consisting of an embryo, reserve food and a protective cover.
3. A seed is defined as a mature ovule, or a reproductive unit formed from fertilized ovule, consisting of an _____, reserve food and a protective cover.
4. A seed is defined as a mature ovule or a reproductive unit formed from fertilized ovule, consisting of an embryo, _____ and a protective cover.
5. Seed acts as a carrier of _____.
6. Seed must ensure high _____ (true to type).
7. Seed must be viable and have good _____ capacity

I. FILL UPS

1. Development of seed without fertilization is called _____.
2. _____ is the substitution for any sexual nuclear fusion.
3. Apomitic seed will have genetic material only from the _____ plant.
4. In _____ apomixis type, the megaspore cell undergoes the usual meiotic division and forms a haploid embryo sac.
5. The process of seed formation without sexual fusion is known as _____.
6. _____ is defined as the development of embryo from some other cell of embryo sac other than egg.
7. Haploid embryo arises from the egg without fertilization is called_____.

I. FILL UPS

1. _____ is the stage of accumulation of maximum dry matter within the seeds.
2. The stage of attainment of physiological maturity by 80% of population is considered as _____ stage.
3. In rice, during harvestable maturity the moisture content of long duration varieties will be _____.
4. For short and medium duration varieties of rice, the moisture content will be _____.
5. Rattling sound of kernel is the physiological maturity symptom of _____.
6. The harvestable maturity indices of cotton is _____.
7. The harvestable maturity indices of bhendi is _____.