eChapters

Harvesting is one of the agronomic management practices that require technical knowledge on maturation of the crops. This knowledge is much important in seed production than in commercial production.

Physiological maturation

• It is the stage of accumulation of maximum dry matter within the seeds. The moisture content of the seed at this stage will be in decreasing order (25-30%) and is expressed with maximum dry weigh of seed, germination and vigour potential. The physiological maturation is represented for individual seed and this maturation will not be the same for the population, due to differential flowering habit.
• The attainment of physiological maturation is represented by sigmoid curve of growth pattern. The physiological maturation can be represented both as duration and visible symptoms.

Abstract

The availability of the quality seed is the first and the most important requirement which is of great relevance in tree improvement programme. Unlike agriculture, the forestry seeds have great variation in size, shape, dormancy, viability, moisture content, etc. It needs special techniques for collection, handling, processing and storage of the seeds of the large number of forest species. A strong commitment to improving tree seed technology is required for full utilization of seed supplies with the help of recent advances in seed physiology. Substantial improvements have occurred as a result of seed technology research offering the potential for major advances in traditional seed production and distribution systems.

A TTO fills the important intermediary position of linking research institution with industry so that innovations and new ideas can reach market. To be able to facilitate that effectively, the institutions must have well-defined R&D policies that include Sponsored R&D, Collaborative R&D, and Grant-in-Aid R&D. These ensure that the research remains properly managed, regulatory compliance assured and aligned with institutional priorities. This chapter has discussed about key policies that can help in successful operation of TTO while aligning institution’s mission and interests Various core policies that help in successful technology transfer include:
• Intellectual property policy
• Technology transfer policy
• Revenue sharing policy
• Startup/Spinout/Venture creation policy
• Conflict of interest/Conflict of commitment policy
Each policy has specific objectives. These policies collectively ensure a clear and consistent framework for technology commercialization.
11.1 Intellectual property policy
An IP policy is a formal document that provides guidelines for managing IP by an organisation. A strong IP policy build trust by ensuring efficiency and transparency. Other benefits of IP policy includes creation of environment to encourage innovation and commercialisation of IP. It also lays foundation to set out the rules for public-private partnerships while addressing issues among various stakeholders and ensures compliance. IP Policy is not law, but a proposed course of action.

Pollination

Pollination is the act of transfer of pollen from the male reproductive organ of a plant to the female reproductive organ of same or another plant.

Pollination is of two types

5.1 Self Pollination

It is the transfer of pollen from the anther to the stigma of the same flower from where the anthers have been generated. Thus, self pollination happens to be denominated as autogamy where auto means “same” and gamy means “union”. Obviously, self pollination is found in bisexual flowers. But self pollination also occurs when pollen is transferred from one bisexual flower to the stigma of another bisexual flower of the same plant. This kind of autogamy is known as geitonogamy. So, self pollination has to be defined keeping the parent plant on the main focus not the flower. If genetical consequences are considered, self pollination promotes the occurance of purelines or homozygotes. Self pollinating species developed themselves evolutionary fit due to homozygous balance and do not exhibit significant inbreeding depression.

Need to know Physiological maturity (PM), Harvestable maturity (HM) and harvesting method

·    If these factors are considered, the harvest produce will have the maximum seed quality characters in terms of germination, vigour and storability.

 The maturity is of two types depending on the purpose. If the crop is for grain production it is enough to harvest the crop during harvestable maturity. But when the crop is meant for seed purpose it is advisable to harvest the crop during physiological maturity.

9.2. Causes of Post-Harvest Losses (A) Primary Causes: (B) Secondary Causes: • Mechanical injury. • State of maturity. • Physio-biochemical losses. • Time of harvesting. • Microbial losses. • Storage facilities. • Physical losses. • Bruishing caused due to transportation and distribution. 9.3. Control of Post-Harvest Losses The extent of post harvest losses in vegetables can be minimized by • Careful harvesting. • Harvesting of vegetables at the right stage of maturity. • Proper sorting, grading and packing. • Careful transportation and distribution. • Adequate and suitable storage facilities. • Pre and post harvest treatment

Post-harvest deterioration primarily means the loss of commodity after harvest. It is one of the serious problems for producers, distributors and consumers. Post-harvest deterioration of perishables is the spoilage of fruits and vegetables after harvesting. Perishables are the feed commodities with moisture content between 50 and 90%. Fruits with the size of 5 g to 5 kg or more, high to very high rate of respiration, high generation of heat, soft texture, easily damageable nature and shorter shelf life are more prone to the microbial damage. The post-harvest losses are caused either by pathological, physiological and mechanical means or combination of all these. These perishables because of having minerals, vitamins, and photochemicals (essentially required for the human health) become victim to the several biotic and abiotic factors easily. Once these fruits are detached from the plant are deprived of essential ingredients as hormones, nutrients, water and other requisites. These biotic and abiotic factors apart from rendering the produce unfit for human consumption reduce the aesthetic value, substantial decrease in food value and also organoleptic quality of the vegetables. The fleshy produce are prone to the exogenous agencies such as fungi, bacteria, etc. as well as other endogenous factors such as respiration, senescence, etc. which may lead to poor quality of the produce and also affect market quality. These perishables continue to respire and may carry out various biochemical activities, leading to ripening subsequently to senescence and making them more susceptible to microbial damage. In addition, tropical conditions prevailing in India, which are characterized by high temperature conditions, are optimal for fungal and bacterial infections. In India, the post-harvest losses of fresh fruits and vegetables are estimated to be about 30%. The post-harvest losses have been recorded are 5-20% at farmer’s field due to pre-harvest infection and sorting, 15-20% due to faulty packaging, 30-40% during transportation and 30-40% during marketing.

Potato, the third most important food crop in the world after rice and wheat is becoming the main source of food and income in developing countries. India stands second in production and area of potato in world after China leaving behind the Russian Federation. In India, potato is an important component in cereal and vegetable-based cropping systems for its ability to produce high dry matter/ha in short duration and high yield compared to cereals. It is grown as mixed crop, intercrop, relay or sequential crop along with other vegetables, cereals and cash crops.

Potato is originated in South America in the high Andean hills and towards the end of 16th century it was first introduced into Europe by Spanish conquerors. In the early 17th century, it was brought to India by British missionaries or Portuguese traders. Thus, potato developed as a temperate crop and was later distributed throughout the world. Cultivated potato consists of two sub species, Solanum tuberosm ssp. andigena and S. tuberosum ssp tuberosum. Subspecies andigena is the primitive form which is adapted to shorter day length and high altitudes of mountains (above 2000). The presently cultivating tuberosum subspecies is adapted to long or short day condition of tropical regions and lower altitudes (500-200m above MSL) and is believed to be evolved from andigena types through selection.

Morphology and Floral Biology

Potato is herbaceous in nature with erect to prostrate stem. Stem is variably coloured from green, purple or mottled green or purple. Leaves are pinnate which ends in single terminal leaflet. Stolon arise from the portion of the plant below the ground. The stolon bears rudimentary leaves and tip is hook shaped. The sub apical portion at the tip of stolon enlarges to produce tubers. Hence, potato tubers are the modification of underground stem with shortened axis and poorly developed eyes. The leaf scar with a subtended lateral bud having underdeveloped internodes is referred to as the eye of the tuber. Potato is a long day plant. Moderate humidity and long day condition favours flowering. Hence flowering and fruit set is observed in hilly tracts. Inflorescence is produced terminally and is usually cymose. Flowers are bisexual, actinomorphic, and hypogynous with 5 calyx, 5 corolla and 5 stamens. The colour of corolla varies from white, pink, lilac, blue and purple. Pollen shedding is through the pores at the tip of the anthers. Mature fruit is a berry. Self-incompatibility is observed in diploid species and tetraploids are self-compatible.

Potato has special seed production problems as the quality characteristics of seed potatoes are influenced by a number of factors and important amongst them are the diseases and pests namely, viruses, fungi, bacteria and nematodes. Once the seed tuber is infected the pathogens, specially viruses, permeate through the plant system. The plant growth, therefore declines and the yield reduces progressively. It is therefore, important that seed stocks should not only be genetically pure but also should be in right physiological condition and disease free at the time of planting. Seed production technology developed for seed potato production, thus aims at producing disease free, genetically pure seed. There are now two independent channels of seed production for hills and plains.

Hill seed : The seed produced in hills (2500 metres above sea level) at suitable locations is called ‘Hill Seed’.

Plain seed : The seed produced in plains at suitable locations is called ‘plain seed’. Northern plains have emerged as an important source of potato seed production. The low aphid, plains seed is in right physiological condition at the planting time and yields higher than the traditional hill grown seed.

Once healthy seed potatoes are introduced into the system of growing them during low Aphid period accompanied by a systematic insecticide application, roguing and removal of haulms before the aphids attain critical number and the re growth is checked, the health standards for the seed crop could be maintained for a number of generations. This system of seed potato production has been designated as ‘Seed Plot Technique’.

I. FILL UPS

1. The potato is made up of _____ and _____.
2. Potato is a _____ pollinated crop
3. Potato fruit is called as_____.
4. An example of stem tuber is a _____.

Precision farming manages spatial and temporal variability within fields through targeted, data-driven interventions. Onion is particularly suited to precision management because its productivity and quality are sensitive to moisture, nutrients, environmental stress, pests and diseases. This chapter describes applications of GIS, GPS, variable-rate technology, IoT, cloud platforms, drones, remote sensing, multispectral imaging, smart sensors, artificial intelligence, automated systems and crop-response models. These technologies support soil assessment, field preparation, irrigation, fertilization, crop monitoring, stress detection, protection, yield estimation, harvesting and storage. Their potential to reduce input waste and improve profitability is considered alongside constraints involving investment costs, technical knowledge, connectivity, accessibility and data privacy.

1. PLANT DOMESTICATION AND INTRODUCTION

Domestication is the process of bringing wild species under human management. Under domestciation, the crop species have changed considerably as compared to the wild species from which they originated.

I. FILL UPS

1. _____ is required during raising of a seed crop to avoid contamination due to natural crossing.
2. _____ is another potent source of genetic contamination i.e., the plants differing in their characteristics from the seed variety.
3. Removal of off types is referred as _____.
4. _____ is the distance maintained between the seed crop and source of contaminant.
5. The isolation distance for cotton foundation seed production is _____.
6. The isolation distance for paddy is _____.

1. GENETIC PRINCIPLES

1.1. Maintenance of genetic purity during seed production

The methods suggested by Home (1953) and Hartmann and Kester (1968) may be used wholly or in part to maintain high levels of genetic purity during seed production.

The various steps suggested by Home (1953) to maintain varietal purity are as follows:

4.1 Introduction
Companies that produce tangible items or offer services must drastically increase their productivity in order to maintain their operations in the face of intensifying global competition. A single quantum jump productivity enhancement technique or multiple concurrent incremental improvement productivity strategies can both be used to achieve this goal. If a business chooses the second choice, integrating various tactics for a significant increase in the total productivity would be quite difficult. The first alternative, a single productivity improvement plan, will make it possible for the business to increase productivity with the same or greater success. The only difficulty with this strategy is locating the probable problem area and then using process improvement techniques to achieve the anticipated dramatic increase in productivity. Business process reengineering refers to any significant adjustment of business processes that results in a dramatic increase in an organization’s productivity. Price, quality, after-sales support, adherence to delivery schedules, technological breakthroughs, etc. are some elements that influence market competition. Therefore, the business should focus its efforts on each of these areas in order to achieve notable improvements in terms of decreased operating costs and higher sales revenue from the sale of its goods and services to clients. Improved pricing for a company’s goods or services can provide it an advantage over competitions. Applying various cost-cutting strategies to lower variable costs and overhead costs will lower the price of the good or service. The other elements, viz. quality, after-sales support, delivery schedule adherence, and technological advancements are all directed in this direction

Since the dawn of civilization, the human species had an intimate association with fruits, roots, nuts and other vegetables that sustained them through the ages. This mutualism continued and flourished through domestication and organized culture of horticultural crops. Pretty long before, homestead gardening had been evolved in different parts of the globe independently to become a part of tradition in almost every society. Plant domestication by all likelihoods started around the human settlements. The obvious reasons for this were man’s need, better supply of water and organic household wastes and protection against destruction or grazing by animals, that’s why the prospective horticultural enterprise of homestead gardens all over the world is still the most enduring and sustainable form of family food production system and very important micro-units for conservation of plant genetic resources. The traditional and indigenous endeavour of the tribal people for conservation of land races also noteworthy contribution from one generation to the next. Though cereals are staples for most of the world population, there has been sustained emphasis on horticultural crops, particularly vegetables, all over the world during last few decades. The possible reasons are:

1. PPV & FR ACT

With the signing of TRIPs agreement of the World Trade Organization (WTO), India has agreed to provide protection to plant varieties. The Government of India, therefore, enacted “ The Protection of Plant Varieties and Farmers Rights Act (PPV&FR Act)” in 2001 and the Regulations for implementing the Act were formulated in 2003.

The Ministry of Agriculture, Government of India, has been identified as the nodal agency for implementing the PPV& FR Act through an Authority known as “The Protection of Plant Varieties and Farmer Rights Authority”. The Authority came into force in November, 2005.

PPV & FR act has 11 chapters, 4 schedules and 97 sections.

In order to provide for the establishment of an effective system for protection of plant varieties, the rights of farmers and plant breeders and to encourage the development of new varieties of plants it has been considered necessary to recognize and protect the rights of the farmers in respect of their contribution made at any time in conserving, improving and making available plant genetic resources for the development of the new plant varieties. Moreover to accelerate agricultural development, it is necessary to protect plants breeders’ rights to stimulate investment for research and development for the development of new plant varieties.

Pumpkin (Cucurbita maxima Duch.) is a well known and widely cultivated vegetable variety of the family Cucurbitaceae. The seed production can be done in summer season (February - March) and in rainy season (April - May). In Tamil Nadu, sowing during July – August is best for seed production.