eChapters

It involves all the steps starting from the extraction till sowing that makes the seed a high quality product for distribution among the farmers for a profitable crop. It reduces the spoilage during storage, increase the shelf life of the seeds, guarantees good germination and field stand thereby reduces the risk of losing the crop at early stages.

Seed Extraction

The seed extraction methods vary with the stage at which the matured fruits are harvested for seed extraction. Some of the vegetable crops are harvested at well ripe stage while some others are harvested at mature dry stage. Proper extraction should be selected taking into consideration the easiness of seed extraction from the fleshy pulp, relatively more seed recovery and less damage to the quality of seeds. There are different methods of seed extraction includes manual method, fermentation method, chemical method and mechanical method.

Manual Method

The manual method of seed extraction varies depending on the harvested fruit type. There are two types of seed extraction in vegetable crops viz., dry extraction and wet extraction.

1. Dry extraction Method

Dry extraction method is following in vegetables where mature dry fruits or mature dried pods are harvested for seed extraction. The harvested dried fruits are kept in sun for 2-3 days. The dried fruits are split open and the seeds are extracted by beating with pliable bamboo stick or by beating against a hard surface. Heavy beating should be avoided to reduce mechanical injury to the seed. Excessive mechanical injury may result in lowering of seed viability. The extracted seeds are dried in the sun between 8.00-11.00 am and 2.00-5.00 pm to reduce the moisture content to a safe level. This is followed in crops like chilli, okra, sponge gourd, ridge gourd, french bean, lablab bean, cow pea, cluster bean etc.

Plant biodiversity is the single greatest resource that man garnered from nature during the long cultural development phase. More than 2.5 lakh species of mosses, ferns, conifers and flowering plants and more than 50,000 plant species are yet to be documented, primarily in the remote and less studied reaches of tropical forests.

Vegetable crops in which rich diversity occurs in India are Cowpea, Common bean, Cole crops, Okra, Brinjal, Sweet potato, Taros, Yams, Sword bean, Velvet bean and Elephant foot yam. Wide diversity was observed in chives, leeks and other Allium spp in Kumaoun and Garhwal Himalayas; cluster bean in Western arid zone; lab lab bean in Deccan plateau; cucurbits in Rajasthan and Madhya Pradesh and leaf vegetables like Amaranth and Fagopyrum in Western Himalayan region. Tropical vegetables consist of solanaceus fruits (tomato, hot pepper, brinjal), cucurbits (water melon, muskmelon, cucumber, pumpkins and squashes, bottle gourd, chow-chow, ivy gourd, bitter gourd, ash gourd, round gourd, snake gourd, pointed gourd, sponge gourd, ridge gourd), malvaceous vegetables (Okra),legumes (common bean, lima bean, dolichos bean, cowpea, sword bean, winged bean), allium (onion, shallot, garlic, leek) and leaf vegetables (amaranth, spinach beet, Ceylon spinach). The indigenous vegetables both cultivated and wild have important role in household nutrition, economy and food security. There are 25 hot spots of biodiversity of which Western Ghats and Eastern Himalayan region are the most important ones. Indo-Myanmar region is one of the largest hot spots of the world and is the centre of origin of tuber crops like yams, taro, Amorphophallus and Alocasia. Tropical tuber crops form an important group of subsistence crops especially to those living in tropics and sub tropical zones. Tuber crops are the third important food crops after cereals and grain legumes. Major tuber crops are cassava, sweet potato, Asiatic yam, African yam, lesser yam, elephant foot yam, taro, tannia and country potato. Minor tuber crops are arrowroot, winged bean, yam bean, canna, safed musli and Jerusalem artichoke. Sweet potato is one of the world’s highest yielding crops.

Biodiversity is the origin of all species of crops and domesticated and the variety within them. It is also the foundation of ecosystem services essential to sustain agriculture and human well-being. Today’s crop and livestock biodiversity are the result of many thousands years of human intervention. The biodiversity in vegetable crops is composed by the genetic diversity, as species diversity (inter specific diversity) and as diversity of genes within a species (intra specific diversity) referring to the vegetable grown varieties, and by the diversity of agro-ecosystems (agro-biodiversity).

Crop diversity is the variance in genetic and phenotypic characteristics of plants used in agriculture. Over the past 50 years, there has been a major decline in two components of crop diversity; genetic diversity within each crop and the number of species commonly grown.

The Indian centre of origin and diversity of cultivated plants represent an outstandingly rich reservoir of nature’s wealth of plant species which include a large number of economically important species including Vegetable Crops. Common vegetables like okra and brinjal are native to this region. Out of the recorded 110 genera and 640 species of cucurbits, 100 species representing 36 genera occur in India. Twenty of these species are endemic. Adoption of high yielding crop varieties and hybrids along with changing land use patterns have led to rapid replacement of native cultivars in most cases. Conserving and sustainable utilization of locally adapted types and primitive landraces are, hence, now major concerns at the national and global levels.

The National Bureau of Plant Genetic Resources (NBPGR) at New Delhi is the nodal organization in India with the national mandate to plan, conduct, promote and coordinate all activities concerning plant exploration and collection, germ plasm import and exchange, plant quarantine, germplasm multiplication and distribution, evaluation and characterization, documentation and conservation of both indigenous and introduced genetic variability in cultivated plants and their wild relatives.

The challenging job of collecting, genetic evaluation and utilization of plant genetic resources cannot be satisfactorily accomplished by one organization. The enormous task of safeguarding and promoting greater utilization of these valuable resources can be best achieved through a networking approach. Professional development is the key to success of this endeavour. NBPGR organizes regularly short-term training courses on various aspects of PGR to impart latest knowledge and techniques to scientists and technicians engaged in crop improvement programmes and handling germpalsm collections.

Abstract

Knowledge of  seed biology is crucial for proper management of  seed sources as well as the handling of seeds. In broadest sense seed technology includes the development of superior crop plant varieties, their evaluation and release, seed production, seed processing, seed storage, seed testing, seed certification, seed quality  control, seed marketing and distribution and research on various aspects. Vegetative propagation has also become popular for the propagation of some tree species, but seed propagation remains the principal mode of propagation in both the temperate and the tropical region. Forest plantations are a powerful tool in the continuing efforts of foresters to increase productivity per unit area apart from mitigating the climate change and global warming issues. Hence to improve the existing stock in terms of yield, quality, disease resistant and desired traits, seed technology can play a major role in providing quality genetic material.

Abstract

Although  people have harvested seeds and fruit from trees for centuries, only after World War II, the science and theories of forest genetics begin to be seriously applied to and practiced in operational forestry around the world. The genetic improvements, or gains, need to be captured, packaged, and mass produced so that these gains could be deployed in operational forestry systems. This can be accomplished through seed orchards which is a link between tree breeding and silvicultural activities. Seed orchards are by far the most frequently used sexually reproducing forestry production populations in the world. Apart from the genetic improvement, seed orchards are also used for the production of seed that is well adapted to specific environments. Seed orchards can be categorized according to the generation of breeding or the type of plant material used.

Archaeobotany

Botany as far as it is relevant in archaeology mainly denotes all types of ancient organic material (in particular ancient plant remains) collected from excavation sites. The deliberate study of the interrelationship between humans and plants and the environmental context in which this occurred has been called archaeobotany.

Genetic purity is the vital determinant in continuing the genetic integrity in seed from generation to generation. This is the basis of variety purity maintenance. The genetic purity depends upon the purity of the seeds planted. The genetic purity of the seeds planted must exceed or equal to the final product purity standards required as the purity generally decreases with subsequent generations of propagation. The improved varieties loose their identity and healthiness unless properly maintained. Maintenance selection can prevent the seed quality deterioration.

Bio-stimulants are increasingly used to improve crop performance while reducing dependence on intensive chemical inputs. They include amino acids, protein hydrolysates, humic substances, seaweed extracts, beneficial microorganisms and plant- or microbial-derived compounds. These substances can influence root architecture, nutrient assimilation, hormonal balance, photosynthesis, stress tolerance and disease resistance. This chapter examines the effects of different bio-stimulants on onion seed germination, vegetative growth, bulb development, yield, quality and storage life. It discusses their modes of action, application methods and integration with nutrient-management programmes. Bio-stimulants are presented as promising components of environmentally responsible and resource-efficient onion production, while areas requiring further research are identified.

Substantial onion losses occur after harvest through sprouting, rotting, physiological weight reduction and quality deterioration. Proper harvest timing, careful handling and effective curing are therefore essential for maintaining marketability and extending storage life. This chapter explains maturity indices, including appropriate levels of top fall, and compares field curing with forced-air methods. It examines topping, grading, packaging, transportation, storage temperature, relative humidity, ventilation and disease management. Physiological and biochemical changes occurring during storage are also considered. An integrated post-harvest approach combining correct maturity assessment, suitable harvesting, complete curing, careful handling, controlled storage and regular quality monitoring can considerably reduce losses and improve year-round onion availability.

Seed germination

It is defined as the emergence and development from the seed embryo, of those essential structures, for the kind of seed in question, indicates its ability to produce a normal plant under favourable conditions. The seedlings devoid of an essential structure; showing weak or unbalanced development; decay or damage affecting the normal development of seedling are not considered in calculating the germination percentage.

An Act to provide for regulating the quality of certain seeds for sale, and for matters connected therewith. It enacted by Parliament in the Seventeenth Year of the Republic of India.

1. Short Title, Extent and Commencement

• This Act may be called the Seeds Act, 1966.
• It extends to the whole of India.
• It shall come into force on such date as the Central Government may, by notification in the Official Gazette, appoint, and different dates may be appointed for different provisions of this Act, and for different States or for different areas thereof.

Onion is an economically significant bulb crop cultivated across diverse agroecological environments. Its cultivars vary considerably in bulb size, shape, colour, pungency, maturity, storage behaviour and photoperiod response. Understanding its vegetative and reproductive morphology, growth habit, physiology and taxonomic relationships is fundamental to crop improvement and germplasm conservation. This chapter examines the botanical features and taxonomic position of onion within the genus Allium. It explains relationships among cultivated types, landraces and allied species and discusses varietal classification according to climatic adaptation and consumer preference. Classical characterization and molecular taxonomy are considered important tools for developing productive, resilient and market-preferred onion cultivars.

Conventional fertilizers often exhibit low nutrient-use efficiency, resulting in nutrient losses, soil degradation, water contamination and unnecessary production costs. Nano-fertilizers offer controlled and targeted nutrient delivery through formulations engineered at the nanoscale. Their high surface-area-to-volume ratio can improve nutrient availability, plant uptake, growth, bulb quality and storage performance while reducing conventional fertilizer requirements. This chapter explains the nature, modes of action and potential benefits of nano-fertilizers in onion production. It also considers nano-biofertilizers, smart nutrient-delivery systems and nano-sensors. Particular attention is given to manufacturing cost, nanotoxicity, effects on soil microorganisms, farmer accessibility and the need for standardized safety and regulatory frameworks.

Precision farming manages spatial and temporal variability within fields through targeted, data-driven interventions. Onion is particularly suited to precision management because its productivity and quality are sensitive to moisture, nutrients, environmental stress, pests and diseases. This chapter describes applications of GIS, GPS, variable-rate technology, IoT, cloud platforms, drones, remote sensing, multispectral imaging, smart sensors, artificial intelligence, automated systems and crop-response models. These technologies support soil assessment, field preparation, irrigation, fertilization, crop monitoring, stress detection, protection, yield estimation, harvesting and storage. Their potential to reduce input waste and improve profitability is considered alongside constraints involving investment costs, technical knowledge, connectivity, accessibility and data privacy.

1. FLOWERING

The flowering goes through a phase of vegetative growth producing more stems and leaves and a flowering phase where they produce the organs for sexual reproduction.

1.1. Synchronisation in flowering

Synchronous flowering refers to the phenomenon of coincident, simultaneous flowering of all population of a given species in a large region.

The chemical composition of seeds is basically determined by genetic factors and varies among different species and seed parts (Table 1). However, it is influenced by environmental and cultural practices.

Strategic partnerships and productive outreach play a crucial role for new technologies to successfully reach the market, drive growth, and strengthen a country’s global competitiveness, Outreach programs have various benefits, ranging from technology transfer awareness, communication of stakeholders, industry, government, to academy partnership promotions. These efforts help in establishing connections, communicating opportunities, and encouraging active engagement from key stakeholders. Outreach activities can be performed under two broad categories:
1. Written communication includes all communication which can be viewed, shared, or made accessible for a set of people in a passive manner. This includes reports, newsletters, guidance, and online content which provide insights of worth for stakeholders.
2. Human outreach includes all direct communication like c face-to-face or verbal form communication it included conferences, conventions, workshops, seminars and personal communication with industry leaders.
The type of outreach creates stronger, more personal connections. An effective outreach strategy usually combines both human and written outreach efforts. By following this strategy TTOs can expand and strengthen partnerships, and make it easier for research-led innovations to get transition from lab to market more effectively. This chapter explores key outreach models, strategic networking approaches, and proven practices for building impactful partnerships in technology transfer.

1. GENETIC PRINCIPLES

1.1. Maintenance of genetic purity during seed production

The methods suggested by Home (1953) and Hartmann and Kester (1968) may be used wholly or in part to maintain high levels of genetic purity during seed production.

The various steps suggested by Home (1953) to maintain varietal purity are as follows:

8.1 Key legal statutes and regulatory foundations
Various policy measures were also undertaken by the Government of India in due course of time. The Government of India enacted four science policies after gaining independence, i.e. Scientific Policy Resolution (1958), Technology Policy Statement (1983), Science and Technology Policy (2003) and Science Technology and Innovation Policy (2013). The 1983 Technology Policy Statement possessed a simple goal of creating indigenous technology and boosting efficient absorption and adaptation of imported technologies suited to the nation’s priorities and. The Technology Policy Statement of 1983 was followed up through the establishment of the Technology Information Forecasting and Assessment Council (TIFAC), an autonomous organization entirely owned by the Government of India under the Department of Science and Technology during 1988. TIFAC also offers some funding and supports development and commercialization of technologies through the home-grown technology scheme, among its other operations. The Technology Development Board Act (1995) was also a significant policy move of the government in the same direction. Also in recent times, the Government of India also unveiled its own National IPR Policy 2016 with the motto cum slogan “Creative India, Innovative India”. In addition, the policy is aligned to a number of other schemes of the Indian Government like “Make in India”, “Atal Innovation Mission”, “Start-Up India” and “Stand-Up India”, all aimed at encouraging creativity, innovation and entrepreneurship in the nation.

13.1 Challenges in the technology transfer process
Technology transfer (TT) is more complex and involves the complex interrelationships between universities, research institutes, the private sector, the state, and society. Though TT is all about translating research findings into purposeful solutions that can support the economy and society, it is not a linear process. The challenges can be described as legal, institutional, cultural, financial, policy, and human resource. All this is accompanied by bottlenecks that inhibit or decelerate the diffusion of promising technologies.
13.1.1 Legal and intellectual property challenges
The vital component of technology transfer is the proper management of intellectual property (IP), which is often the most challenging aspect.
• Ambiguities in IP ownership: During multi-institutional or shared funder research, ownership is quite controversial. As an example, when a government lab and a university collaborate on the project, there is ambiguity as to who would have the ultimate licensing authority over the technology: the university, the lab, or the funding agency. This kind of fight hinders commercialisation and scares off industry partners.
• Lengthy patent filing and prosecution timelines: In several jurisdictions, the filings, examination, and granting of a patent may take between three and five years or more. Such delay is not compatible with the rapid cycle of invention in other fields such as ICT or biotechnology, where patent claims may become invalid before they are granted.
• High costs of IP protection: International direct patenting, like under the Patent Cooperation Treaty (PCT), is costly and involves legal services, fees, and upkeep costs. These costs are excessively high, which cannot be easily compensated by universities and startups, and where technologies are not secured or limited to local markets.