eChapters

A. General Morphology

2.1 The Root

It is the organ of a plant that typically lies below the surface of the soil.The root is best defined as the non-leaf, non-nodes bearing parts of the plant’s body. However, important internal structural differences between stems and roots exist. Root spices are, rather surprisingly, rare. Some popular examples of spices having roots are: Apium graveolens (Celery), Armoracia rusticana (Horse radish), Coriandrum sativum (Coriander), Ferula asafoetida (Asafetida), Glycyrrhiza glabra (Licorice), Levisticum officinale (Lovage), (Petroselinum crispum (Parsley), etc. All of the mentioned plants have aromatic roots.Roots of gingiberaceae are adventitious and storage roots arise from among the nodes of these scales.

3.1 Tomato

Tomato (Lycopersicon esculentum) is an important vegetable crop. Its 2n= 24.

Floral biology

Flowers are borne in small forked racemose cyme. Anthesis starts at 6.30 a.m. and continues up to 11.00 a.m. Anther dehiscence is longitudinal. It occurs 1-2 days after opening of corolla. The stamen sheds its pollen when the style grows up through anther tube, thus self-pollination occurs. When the stigma protrudes above the anther tube, chances of cross pollination through bees increases. The optimum temperature for pollination is around 21°C.

Increasing food need, decreasing land availability and concurrently attenuating synthetic nutrients supply envisage the use of alternate supplementary inputs for the cultivation of crops. India is among the few nations where systematic farming started thousands of years ago. It was not only the source of income but was also a way of life. Agricultural activities and the techniques adapted to suit local needs and conditions. Different farming systems were followed by the farmers in different areas according to their needs and weather conditions. The produce was usually shared with other communities of the society involved in other professions. Almost all the nutrients removed by the crops were recycled to the soil directly or indirectly (Yadav and Mowade, 2005). In economic terms, the system followed by the then farming community was highly cost effective since all the inputs needed were locally available and practically no expenditure was incurred except labour. The traditional agriculture was though less productive but self-sufficient. With the advent of modern scientific discoveries, agriculture also changed its face, and with the introduction of high yielding varieties, synthetic fertilizers and effective plant protection measures through chemicals, Indian agriculture made rapid strides in the shape of Green Revolution. As an upshot of Green Revolution, the grain production increased two and a half folds in about three decades with a marginal increase in net-area under cultivation.

5.1 Jute Seed Production

Jute ranks secand next to cotton as the most important natural fibre and it recognized as the ‘golden fibre’. Its products being biodegradable and environment friendly in contrast to synthetic substitutes, a renewed interest in this natural fibre has been generated in the recent past throughout the world. Important characteristics of jute fibre are its silky lustures, high tensile strength, low extensibility, considerable heat resistance. Because of its great abundance and shortage of cotton, jute is blended with cotton and jute/cotton blended yarns are produced mainly to take advantage of the lower price of jute fibre (Doraiswamy et al, 1998). Several diversified product is also made from jute. Since currently the paper industry has been using it as a raw material for paper. It is also being used in geotextile. The jute sticks are largely used as fuel and also for making gun powder.

9.1. INTRODUCTION

Maize (Zea mays L. ssp. mays 2n = 20), known as corn in some countries is an important cereal crop of the world. The scientific name from Greek word ‘Zea’ for a kind of grain and West Indian word ‘malnis’ for corn. Maize was domesticated in Mesoamerica and hence formed the Mesoamerican people’s identity and later it spread throughout American continent. Maize is widely cultivated throughout the world and a greater weight of maize is produced each year than any other cereal grain. USA produces almost half of the world’s harvest (42.5%) and other top producing countries include China, Brazil, Mexico, Argentina, India and France. During the year 2007, worldwide maize productivity was around 4970 kg per ha. Maize is the only cereal that can be harvested and used at various stages of plant development. The crop can be cultivated on a wide area from 580 N to 400 S from below sea level to altitudes higher than 3000 m and in areas with 250 mm to more than 5000 mm of rainfall per year (Shaw, 1988, Dowswell et al., 1996).

Cole crops refers to vegetable crops originated from a common ancestor, colewort or wild cliff cabbage (B. oleraceae var oleraceae or Brassica sylvestris L.) and they belong to family Brassicaceae. They prefer low temperature for growth and development hence mainly grown as temperate vegetables in temperate and subtropical climatic zones. This group of vegetable includes cabbage, cauliflower, knol khol, brussels sprout, sprouting broccoli, kale, Chinese cabbage etc. They are Mediterranean vegetables since its centre of origin is considered to be Mediterranean region. Later on, it spread into different parts of the temperate and subtropical countries. In India, cultivation of cole crops was started in the hills where temperate climate prevails and in states like Uttar Pradesh, Orissa, Bihar, Assam, West Bengal, Maharashtra and Karnataka as cool season crop. But with the introduction of tropical types which are more tolerant to high temperature cultivation, cole crops are taking new pace in the cropping system of nontraditional areas. Cabbage and cauliflower became the most widely grown cole crops though cabbage, knol khol and curly kale were the first cultivated types and cauliflower came in the mid-way followed by brussels sprout and sprouting broccoli. The genetic designation of different vegetables under cole crops were described by several workers of which Linnaeus (1753) designated all the cole crops under one species, Brassica oleraceae and in 1969, Neuwhof classified them into different forms as B oleracea var capitata L. (cabbage); B oleracea var botrytis L. (cauliflower); B oleracea var gemmifera DC. (Brussels sprout); B oleracea var italica L. (sprouting broccoli); B oleracea var gongyloides L. (knol khol) and B oleracea var acephala DC. (kale).

Cole crops are usually biennial herbs with tap root system and erect stem. They are highly cross-pollinated and temperature sensitive for the production of head and curd. They are classified as early, mid and late varieties based on the temperature requirement and duration. Among this, early varieties are found to be high temperature tolerant and late varieties are low temperature tolerant. The flowering in cole crops requires a chilling temperature of 4-70C for about 6 8 weeks which transforms the juvenile phase into reproductive stage with exceptions of some early varieties of cauliflower and sprouting broccoli. Upon receiving the chilling temperature, the central stalk will develop into reproductive shoot or multiple reproductive shoots will be formed from the curd. The earlier is seen in cabbage, brussels sprout and kale whereas, the latter in cauliflower and sprouting broccoli. The seed production of cole crops belonging to temperate groups are mostly undertaken in temperate hills especially in the hills of Uttaranchal and Himachal Pradesh whereas, seeds of tropical types are produced in plains and lower hills of India.

Root crops are cool season vegetables growing for its fleshy root developed from the tap root and hypocotyl region. They are grown during winter in tropical and subtropical condition, throughout the year in hills and spring-summer in high altitude hills. The major root crops growing in our country include carrot (Umbelliferae), radish (Brassicaceae), beet root (Chenopodiaceae) and turnip (Brassicaceae). Two distinct types viz., asiatic or tropical types and European types present in these root crops except beet root. In beet root, European or biennial types only exist. The tropical types are annuals that does not require chilling treatment for flowering. Therefore, seed production of these types is taken up in plains but European types are biennials and they require vernalization treatment after vegetative phase for flowering. Hence, the seed production of biennial types is possible in hills. The seed productions of Asiatic varieties of root crops are done in Punjab, Haryana, U.P. and parts of Rajasthan and Gujarat. Whereas, the seed production of temperate varieties is done in Saproon valley, Kullu valley, Kalpa valley of H.P., Kashmir valley of J&K and selected location of Northeast region specially Sikkim and Arunachal Pradesh. The seed production of beet root is being done in high altitude hills of J&K. All the crops belonging to this group are similar in the cultural practices though they come under different family. All root crops prefer well drained loose and friable soil. Ridge or bed planting is mainly following in all root crops. They are direct sown crops and does not respond to transplanting. They are highly cross pollinated.

The two methods of seed production following in root crops are seed-to-seed method and root-to-seed method. The first method is followed for the production of truthfully labelled seed or certified seed as the seed yield will be more, but quality remains inferior to the second method. The breeder seed as well as foundation seeds require utmost quality hence root-to-seed is preferred for its production. In this method, the matured roots are harvested and the roots are inspected for its trueness. Only true-to-type roots are selected for replanting in the field for seed production and undesirable ones are discarded. The selection and rouging in seed crop are done on the basis of foliage characters and external and internal root characters (colour, shape, size, flesh colour, core size, pungency, indistinct rings etc.). The roots after selection are prepared for replanting by cutting one-third top (shoot) portion and one-fourth to one-half root cut. the prepared stecklings are replanted to obtain good yield of quality seeds. In case of turnip and beet, after selection, the tap root and tops of the roots are trimmed without injuring the crown portion and is replanted.

Organic agriculture or farming is very much native to India. Whosoever tries to write a history of organic farming will have to refer India and China. The farmers of these two countries are farmers of 40 centuries and it is organic farming that sustained them. This concept of organic farming is based on following principles:

• Nature is the best role model for farming, since it does not use any inputs nor demand unreasonable quantities of water.
• The entire system is based on intimate understanding of nature’s ways. The system does not believe in mining of the soil of its nutrients and do not degrade it in any way for today’s needs.
• The soil in this system is a living entity.
• The soil’s living population of microbes and other organisms are significant contributors to its fertility on a sustained basis and must be protected and nurtured at all cost.
• The total environment of the soil, from soil structure to soil cover is more important.

6.20. Role of Micro Nutrients in Vegetable Production 6.20.1. Born 6.20.1.1. Importance Warington first demonstrated the essentiality of boron in plants in 1923 in broad bean (Vigna fava L.). Boron markedly affects nitrogen uptake and the metabolism of nitrogen compounds. The protein contents of young leaves decrease and soluble nitrogen compounds, particularly nitrate accumulate under the condition of severe boron deficiencyBoth with and without boron added, nitrate reductase activity was obviously higher with Ca (NO3 )2 than with (NH4 )2 SO4 . With boron added, nitrate reductase activity in leaves increased from the basal to the top parts of the plant.

Seed processing, drying, cleaning and upgrading

Seed processing refers to all the steps necessary for preparation of harvested seed for marketing namely handling, drying, shelling, preconditioning, cleaning, size grading testing, and packaging etc.

Layout for seed processing plant

Layout plan for construction of seed processing plant should be carefully planned to ensure that thorough seed cleaning, upgrading, seed treatment and other seed processing operations are carried out efficiently without mixing and damaging seed lots with minimum equipment, personnel, time and at minimum cost.

The following factors should be considered while planning and designing the processing unit:

Dietary constitution of Indian people is mostly cereal based. However, the cereals supply chiefly carbohydrates. Therefore, there is deficiency of protein, minerals and vitamins, especially vitamin A, riboflavin, vitamin C, etc. in the diet. The dieticians advocate the intake of 125 g leafy vegetables, 75 g other vegetables and 100 g root and tuber vegetables (total 300 g) everyday because vegetables provide all the nutrient components like carbohydrates, protein, fat, minerals, vitamins and water along with roughages, which are the essential constituents of a balanced diet.

India has attained food security by increased cereal production due to green revolution. In case of vegetables, although there has been increase in production from 15 million tonnes during 1950 to 94 million tonnes in 2005 but still more vegetables are needed to meet the minimum requirement of at least 250 g per day per capita. There has also been increasing demand for fresh export and for processing industries. Moreover, there is a pressure for increasing vegetable supply caused by constantly increasing population in a world of limited acres.

Addition of new agricultural land is of course not possible. In this situation, plant breeding can be expected to contribute substantially to greater vegetable productivity. This can be accomplished not only by the breeding of basically higher yielding varieties but also by the development of varieties that help to stabilize production through resistance to various biotic and abiotic stresses.

3.1. Multiple Choice Questions

1. The Σ of probability will be
   1. 1.0
   2. 2.0
   3. 3.0
   4. 0.5
2. Frequency distribution can be converted in probability by calculating -------------------------------------- ?? each class which can be consider the probability of that class
   1. Individual frequency
   2. Relative frequency
   3. Both relative and individual frequency
   4. None of the above
3. In binomial distribution, mean is always greater than ---------------------------------------------------------------------------- ??.
   1. Median
   2. Mode
   3. Variance
   4. All of the above

Solanaceae is a plant family that comprising of 2300 species and 85 genera of which, nearly one half of the species belongs to the genus Solanum. The genus Solanum includes both tuber bearing and tuber nonbearing forms. Among the tuber nonbearing forms, the major fruit vegetables growing throughout the world are tomato, brinjal and chilli. They prefer warm humid tropical climate for growth and development. Hence, the agroclimatic regions where this type of climate prevails is suitable for seed production of these vegetables. In addition to this, hybrid vigour has been widely commercially exploited in these crops because of easiness in emasculation and pollination and availability of large number of hybrid seeds per fruit.

Tomato (Solanum esculentum L.)

Tomato is the most important warm season vegetable growing throughout the world. The fruit is valued as salad vegetable and for cooking purpose. It is one of the vegetables from which, a wide variety of processed products are made. The crop is grown throughout the year in one part or other part of the country and it has become one of the indispensable fruit vegetables in our diet. It is rich in vitamin A, vitamin C, niacin, and minerals like calcium, phosphorus etc and it is rich in antioxidant, lycopene which is the carotenoid responsible for the red colour of tomato. Tomato is of recent origin, and it is the native of Peru in South America from where it spread to the entire part of the world.

2.1 Rice

Rice is the staple food for the largest number of people on the Earth. According to an estimate, the global rice production must reach 800 million tonne from the present 91.04 million tonne in 2005-06 to meet the demand in 2025. It’s area is 37% of the total area under food grains as against 20% under wheat, another important food crop. But globally it stands next to wheat in harvested area. As the irrigated rice contributes more than 75 per cent of the total rice production, enhancing its yield potential would be key to meeting the global rice requirement for an additional 215 million tonne. To achieve the target yield, rice varieties with a yield advantage of about 20 per cent over popular and widely adapted rice varieties under tropical conditions must be developed. Experience in China, India, Vietnam, Philippines, Bangladesh and several other countries clearly indicates that hybrid rice technology offers readily available option to meet this challenge. 

7.1. INTRODUCTION

The cultivation of wheat (Triticum spp.) reaches far back into history. Wheat was one of the first domesticated food crops and for 8000 years has been the basic staple food of the major civilizations of Europe, West Asia and North Africa. Today, wheat is grown on more land area than any other commercial crop and continues to be the most important food grain source for humans. Its production leads all crops, including rice, maize and potatoes.

Wheat is special in several ways. It is grown on more than 240 million ha, larger than for any other crop, and world trade is greater than for all other crops combined. The raised bread loaf is possible because the wheat kernel contains gluten, an elastic form of protein that traps minute bubbles of carbon dioxide when fermentation occurs in leavened dough, causing the dough to rise (Hanson et al., 1982). It is the best of the cereal foods and provides more nourishment for humans than any other food source. Wheat is a major diet component because of the wheat plant’s agronomic adaptability, ease of grain storage and ease of converting grain into flour for making edible, palatable, interesting and satisfying foods.

The importance of fruits and vegetables in human nutrition is well known. Vegetables are a rich and comparatively cheaper source of minerals and vitamins. Besides, their consumption in sufficient quantities provides taste and palatability, increases appetite and provides a fair amount of fibers. These are currently reckoned as an important adjunct for the maintenance of good health and beneficial in protecting against some degenerative diseases, thus, they form a vital part of human diet. Besides, vegetables now a day are being considered as an asset for providing a good source of income to the growers.

Vegetables originated in different parts of the world, some came from tropical or subtropical countries and others from temperate zones, some from humid areas and others from climates that are more arid. Most of the countries in the world are gifted with varied agro-climatic environments for growing an array of vegetable crops to combat the present imbalanced diet of a vast population of the world, particularly in the developing countries. Production of vegetables in developed countries is much higher, for instance in Japan, nearly 40% of the diet of the people is vegetables. To meet out the full dietary needs of the common man, to eliminate malnutrition, deficiency of minerals and vitamins and also to relieve the stress for increased production of cereals, there is a greater need for growing vegetables on larger scale. As such, for increased production of nearly 247 known vegetable crops, a sound knowledge of the various aspects of vegetable production technology, environmental stresses and constraints, techniques of raising, pre- and post-harvest technology, marketing and seed production techniques is of utmost importance. Breeding and selection of new cultivars have allowed for a greater adaptability to less favourable growing conditions than was possible in the past but the inherent agroclimatic requirements of a specific kind of vegetable have not changed materially. Time or season of planting of a particular vegetable crop is determined by its environmental requirement. Knowledge of specific agroclimatic conditions required for a particular crop could enable the grower to select the best season of planting in any particular area (Singh et al., 1991).

India is contributing about 10% of the world’s vegetables, and in terms of production, the country stands second after China. The existing area under vegetable cultivation in India is around 6.89 million hectare with a production of about 96.54 million tonnes. There will be a demand of 151-193 million tonnes of vegetables in India by 2030 (Dhaliwal et al., 2006). There are extensive crop losses in vegetable crops due to increased insect infestations. Since vegetables are grown round the year, there is carry over of insect-pests across the seasons and also from sowing until harvesting. Vegetables also invite more pest problems because of their cultivation under high fertility conditions leading to high plant succulence. High yielding varieties and hybrids are further more prone to the attack of insect-pests. Insect infestation affects the quality and market value of vegetables adversely and it is estimated that 30-40% of the total production is lost due to the attack of pests (Lal et al., 2004). A large number of pesticides are being used repeatedly to manage the insect-pests in India. Indiscriminate use of pesticides has led to many problems like toxic residues in edible parts of the vegetables, adverse effects on non-target organisms and beneficial insects, resurgence of secondary pests and development of resistance in major pests to pesticides and also environmental pollution. Therefore, latest approach has been to minimize the use of highly toxic insecticides by integrating different strategies of pest control like use of biological control agents, pesticides of plant origin, insect resistant varieties and other cultural practices. In this chapter, efforts have been made to highlight the distribution, host range, identifying characters, biology and nature of damage of important insect-pests of vegetables and also the methods of their management crop or pest wise.

Revolutionizing skin cancer detection
The diagnostic process for skin cancer is evolving. Physicians have in the past relied upon physical exams to be followed by scanning and biopsies taking anywhere between 15 days to return results. Although most abnormalities turn out to be non-cancerous, this is distressing to patients and contributes to healthcare costs. Additionally, certain growths that turn out to be cancerous remain undiagnosed since they have not been visible.
Breakthrough startup Damae Medical is set to reverse this process. The startup has developed an advanced probe that is able to take 3D images of the skin to unveil the full extent of abnormalities in real time. This enables doctors to diagnose in an instant, enabling improved personalized treatment. When an operation is required only diseased tissue is removed to prevent unnecessary treatments and improved outcomes in patients.
The Origins in the Institut d’Optique
The beginnings of Damae Medical can be traced to Palaiseau-based Institut d’Optique where in 2013 two photonics students envisaged potential in an emerging imaging tech. Together with the inventor himself in 2014, they cofounded Damae Medical by taking an exclusive license to the core family of patents held by three partner institutions. While this contract was beneficial in launching the company to an early growth spurt, in the long run created difficulty in exercising control. This was resolved by taking an equity-forcontrol purchase in 2019 by Damae to acquire the foundational patent

Spices are those plants, the products of which imparts strong flavour and aroma to the food. This is attributed to the presence of compounds such as volatile oils present in the plant parts. India is renowned for wide variety of spices and is designated as land of spices. Spices are indispensable ingredient in almost all Indian dishes and cuisines foreign invaders invaded India for spices in ancient times. India is figured as the largest producer, consumer and exporter of spices and spice products in the world. Turmeric and Ginger are the major rhizomatous spices of vegetable origin widely cultivating and using in India. They are known for its antimicrobial and antioxidant properties, hence using in medicines for the treatment of various ailments. Apart from these rhizomatous spices, India is also contributing a major share in the production of seed spices. Around twenty spices among sixty-three spices growing in our country are classified as seed spices. Major seed spices of India are coriander, cumin, fennel, fenugreek, dill, ajowain, celery, anise, nigella, caraway etc. These seed spices are extensively cultivated in the arid to semi-arid region of India as Rabi crop.

It is estimated that, spice production in our country increased from 67.64 lakh tonnes in 2014-15 to 106.79 lakh tonnes in 2020-21 with an annual growth rate 7.9%. There is a corresponding increase in the area of cultivation also. An increase in area from 32.24 lakh hectare to 45.28 lakh hectare was observed. Among the major spices, cumin (14.8%), garlic (14.7%), ginger (7.5%), fennel (6.8%), coriander (6.2%), fenugreek (5.8%), red chilli (4.21%) and turmeric (1.3 %), showed significant growth rate in production. The export of spices contributes around 41% of the total export earnings from all horticulture crops in the country and it ranks fourth among agricultural commodities, after marine products, non-basmati rice and basmati rice.

5.1. Precision Farming Precision farming is an emerging concept in modern agriculture. It is micro management system to arrive at improved agriculture and land management decisions that result from using information delivered by geospatial technologies. In other words it is “Digital Agriculture” involving very large scale farm level mapping, comprehensive data base creation on required resources generated through space based inputs and field observations and making a detailed plan of work for maximizing the yield and reducing the cost on inputs using the decision support system. Precision farming means to do the right thing, in the right place and in right time. It is also called site-specific management (SSM), is the management of an agricultural crop at a spatial scale smaller than the individual field. In many fields, the crop’s environment varies substantially from one part to another