eChapters

Onion bulbs remain vulnerable to moisture loss, sprouting, rotting and microbial deterioration during extended storage. Traditional structures frequently provide inadequate ventilation and expose produce to fluctuating temperature and humidity. This chapter examines scientific curing and storage technologies, including improved ventilated structures, zero-energy cool chambers, forced-air systems and controlled or modified atmospheres. Renewable-energy and solar-powered facilities are considered for small and marginal farmers. The chapter also discusses value addition through dehydration, powdering, flaking, pickling, paste production and other processed products. Improved storage enables gradual market release and price stabilization, while value addition reduces waste, creates diversified products, enhances shelf life and generates additional income for growers and processors.

These materials include barrier coated paper bags, barrier laminated film bags, jute bags, PP woven box bag and cotton bags.
 
A: Paper Bags
    1.    Coated paper:  bags provide a barrier for leaking or staining of the product. This can be done by a greaseproof or claycoated kraftpaper.
    2.    Open-Mouth sacks:  can be manufactured using different types of paper. Simple kraftliner, glossy claycoated and lacquered outerliner are possible. These sacks can be supplied with liners and printed up to 8 colours.

PPEs are the personal protection equipments which protect the personnel against some hazards in the shop floor. PPEs form important aspects of Environment (safe disposal of treated chemicals, dusts coming out of processing), Safety (to seed storages) and Health (personnel) (ESH) strategy of any shop floor.

I. FILL UPS

1. _____ is the fastest growing oilseed crop in India.
2. The inflorescence of sunflower is _____.
3. The tiny flowers (or) florets are attached on a platform called _____.
4. Sunflowers in bud stage exhibit _____.
5. _____ is a tuft of hairs on the fruit.

1. DEFINITION

Artificial seed technology involves the production of tissue culture derived somatic embryos encased in a protective coating. Artificial seeds have also been often referred to as synthetic seeds. However, the term ‘synthetic seed’ should not be confused with commercial seeds of a synthetic cultivar which is defined as an advanced generation of an open pollinated population composed of a group of selected inbred clones or hybrids. The concept of artificial or synthetic seed is shown in Figure 1.

Introduction

Synthetic seeds are defined as artificially encapsulated somatic embryos, shoot buds, cell aggregates, or any other tissue that can be used for sowing as a seed and that possess the ability to convert into a plant under in vitro or ex vitro conditions and retained its potentiality also after storage (Capuano et al., 1998). In other words, synthetic or artificial seeds defined as somatic embryos engineered seed used in the commercial propagation of plants (Gray and Purohit, 1991; Redenbaugh, 1993).

Artificial seeds have great potential for large scale production of plants at low cost as an alternative to true seeds (Roy and Mandal, 2008). An artificial seed is often described as a novel analogue to true seed consisting of a somatic embryo surrounded by an artificial coat which is at most equivalent to an immature zygotic embryo, possibly at post-heart stage or early cotyledonary stage (Bekheet, 2006). There are various advantages of artificial seeds such as better and clonal plants could be propagated similar to seeds, preservation of rare plant species extending biodiversity could be realized, and more consistent and synchronized harvesting of important agricultural crops would become a reality, among many other possibilities (Khor and Loh, 2005). In addition, ease of handling, potential long-term storage and low cost of production and subsequent propagation are other benefits (Bekheet, 2006).

Synthetic seeds are also known as somatic seeds, artificial seeds, clonal seeds and synseeds. They are analogue for botanical seeds. Somatic embryoids which are tissue culture produced embyoids with bipolar structures, apical and basal meristematic regions which are capable of forming shoot and root respectively. Somatic embryoids are encapsulated and are used as artificial seeds possessing the ability to convert into plants in in vitro and ex vitro conditions. Artificial seeds are broadly two types.

1. HAND EMASCULATION AND POLLINATION

The male part of seed parent is removed by hand before anthesis to check the self pollination from the crop plants with bisexual flower having fertile male and female part. This process is known as emasculation. These emasculated flowers are then pollinated by the pollens collected from pollinator parent to produce hybrid seed (Fig. 1). Eg. Cotton, tomato, brinjal.

5.1 Technology readiness levels- Introduction
Technology readiness levels (TRLs) is measurement of the maturity level of a particular technology. These are based on a scale from 1 to 9, with 9 being the most mature technology. It is a map that shows whether a given technology is in a conceptual state or can be used in real-world applications and ensures innovations are thoroughly tested before being applied on a large scale. The TRL scale uses a set of questions designed to measure progress of a technology toward maturity. They help in reducing risks and improving efficiency. TRLs were initially designed in the 1970s for use by NASA to assess how prepared a technology was for space missions. Technology for space travel is always extremely sophisticated and with a high degree of risk. NASA required a system to assess systematically whether or not a new technology was ready to implement. By breaking down development into different levels, NASA was able to provide informed decisions on which innovations were ready to incorporate (figure 12). In due course, TRL proved to be so effective that other industries began to use it. Other entities like the European Space Agency (ESA), U.S. Department of Defense (DoD), BIRAC, DRDO and many other agencies have taken , to using TRL to guide R&D strategies. TRL helps in simplifying development, decreasing risks, and maximizing resource utilization.

I. FILL UPS

1. _____ is a technology that eliminates or reduces the germination capacity of the following seed germination.
2. _____ technology offers a means of preventing the unwanted flow of genes from genetically modified organisms.
3. Terminator technology is technically known as _____.
4. _____ technology is used to protect the transgenes from being pirated by researches elsewhere.
5. _____ is a inducer used to initiate the terminator gene interaction.

Introduction

Seeds are regarded as carriers of new technology and serve as basic catalytic input for enhancing the agricultural production. Hence the timely availability of quality seeds of the right variety in adequate quantity decides the strength of an agricultural economy. The intensive crop improvement programmes have resulted in the development of large number of hybrids and high yielding varieties in many important crops. Today, the Indian seed industry is the fifth largest seed market in the world, accounting for 4.4 per cent of global seed market. In terms of global trade, India is almost self-sufficient in flower, fruits and vegetables and field crops seeds (Anonymous, 2015). Economy of crops depends on good crop variety. Farmers choose these verities based on good quality traits and satisfactory yield. Thus, it is always essential to do fidelity check of all plant variety. The genetic purity is one of the most important aspects of quality control. Seed quality includes good germination, purity, seed health and vigour. With the increase in seed industry, there has been a refinement in the techniques used for testing genetic purity or genuineness of seed purity. Methods for testing genetic purity include different morphological, chemical, biochemical and molecular markers. Under PPV & FR Act, DUS (distinctiveness, uniformity, stability) testing procedure is performed with morphological descriptors. However, in agriculture, biotechnology has found applications in checking of true to type of clones and variety identification programs using molecular and chemical markers. Markers that reveal polymorphisms at the protein level are known as biochemical markers, while DNA markers reveal polymorphisms at the DNA level.

Mechanical damage in oil seeds like soya bean can be induced at any time during harvesting, handling, conditioning and sowing operations. There is relationship between moisture and mechanical damage. In general the low moisture containing seeds are more prone for mechanical damage than the high moisture containing seeds. In this experiment we look for this relationship by measuring seed quality parameters like germination and leakage (electrical conductivity).

Preliminary

1. Short title and extent

1. This Order may be called the Seeds (Control) Order, 1983
2. It extends to the whole of India
3. It shall come into force on the 30th December, 1983

An Act to provide for regulating the quality of certain seeds for sale, and for matters connected therewith. It enacted by Parliament in the Seventeenth Year of the Republic of India.

1. Short Title, Extent and Commencement

• This Act may be called the Seeds Act, 1966.
• It extends to the whole of India.
• It shall come into force on such date as the Central Government may, by notification in the Official Gazette, appoint, and different dates may be appointed for different provisions of this Act, and for different States or for different areas thereof.

A bill to provide for regulating the quality of seeds for sale, import and export and to facilitate production and supply of seeds of quality and for matters connected therewith or incidental thereto. Be it enacted by Parliament in the Fifty-Fifth Year of the Republic of India as follows

Part I - Preliminary

1. Short title: These rules may be called the Seeds Rules, 1968
2. Definitions: In these rules, unless the contest otherwise requires.

Removal of seeds from dry fruits is known as threshing while that of wet fruits is known as extraction. Threshing involves beating or rubbing the plant material to detach the seed from its pod or fruit. The detached seed is then winnowed to remove chaff, straw and other light material from the seed.

Threshing / extraction methods

1. Mechanical threshing

• Various types of threshing machines with adjustable cylinder speeds are available for extraction of vegetable seeds.
• Care must be taken to avoid damage to the seed during mechanical threshing, by properly adjusting the speed of the beaters, the width of the gap between the beaters and the concave, the airflow and the sieve sizes.

Tomato is one of the most popular and widely grown nutritious vegetable in the world. Tomato (Lycopersicum esculentum Linnacus Karst.) belonging to the family Solanaceae is one of the most nutritious and remunerative vegetable crop. It is the world’s important vegetable next to potato. The crop is cultivated throughout the year. In Northern plains, the crop is cultivated during autumn, spring and summer. In South India, the crop is grown in June – July, October – November and January – February. The optimum season for seed production in southern India is October – December. Nursery raised in late October and transplanted in the first week of December will produce a good seed crop.

I. FILL UPS

1. Tomato is a _____ pollinated crop.
2. _____ pigment is responsible for red colour of tomato.
3. Seed rate recommended for tomato is _____.
4. Isolation distance recommended for foundation seeds of tomato is _____.
5. Spacing adopted for tomato is _____.

Abstract

In afforestation and reforestation programs, seed has become a valuable commodity and its collection, identification, handling, processing, testing, storage and certification requires prudent planning. The research and development in seed science and technology have made significant progress in recent years. The quality of seed has been the subject of increasing interest among Forest Managers and the Scientists. Not every seed is suitable for sowing. Sometimes, the seeds do not develop into normal plants or the plants produced do not produce the expected harvest. This manuscript reviews, the progress made to-date in the forest tree seed germination and highlights future line of action.