eChapters

Botany:Fenugreek is a leguminous plant, belonging to the Papilionaceae family. Fenugreek is an annual herbaceous plant between 20 and 50cm high. (sometimes up to 100cm.). Its stem is erect, branched, grooved and with little pubescence. The leaves are compound, petiolate, oblong leaflets formed by three kills reminding those of alfalfa. White or yellow flowers , isolated or arranged in pairs. Fenugreek fruits are narrow and elongated pods. They contain 10 to 20 seeds, tiny yellow, quadrangular, with a groove in the central part dividing them into two unequal lobes.

Land Requirements: Land to be used for seed production of Kasuri methi and methi shall be free from volunteer plants.

Varieties: Co 1, Pusa Early Bunching, Lam selection 1, Rajendra Kranti, Kissar Sonali, RMT1and CO 2.

Soil: A rich well drained loamy soil is best suited.

Climate: Cool and comparatively dry, frost free climate. It requires a warm climate with mild temperatures for a good seed production (between 8 and 27°C).It grows well in full sun. Sow it in places sheltered from the wind. Resistant to frost and temperatures down to -5°C. However, low temperatures during planting causes not all seeds to germinate.

Season: June - July and October - November.

Botany: Cashew belongs to the Family Aricardiaceae. A small evergreen tree native of tropical America from Mexico to Peru and Brazil but now cultivated largely in Malabar, Kerala, Karnataka, Tamil Nadu and Andhra Pradesh and to some extend in Maharashtra, Goa, Odisha and West Bengal

The commercial production is mainly confined to India, Mozambique, Tanzania, Kenya; Brazil, Philippines, Malaysia and Sri Lanka.Cashew is an important foreign earning crop of India, remarking second (29%) in the international trade of the nuts. It is a crop of marginal lands and can be grown under rainfed conditions.

Soil and climate: It grows up well in all soils. Red sandy loam is best suited. Plains as well as hill slopes upto 600 - 700 feet elevation are suitable for cultivation. Season: June - December. Propagation: Soft wood grafting, air layer and epicotyl grafting. Requirement of plants: 200 plants/ha. Preparation of field: Pits of 45 cm3 size are dug and filled up with a mixture of soil + 10 kg FYM + one kg neem cake and 100 g Methyl parathion 1.3 %.

Micrografting is a method to produce virus free, viroid free and disease free grafts that are clonally propagated. This method is an aid to mass multiplication. In vitro grafting is applied to difficult to root clones. Micrografting is performed to understand incompatibility prediction between the two grafting partners, virus indexing, deduction of latent virus, safe germplasm exchange and to do grafting functions throughout the year. It is not season specific. Protocols for micrografting are available for almond, pistachia, olive, prunus, grape, mulberry, cashew, citrus, peach, pear, avocado, hazlenut, walnut, chestnut and grape fruit (Hussein et al., 2014).

Botanical description :Botanically, cluster bean is known as Cyamopsis tetragonoloba (L) Taub. (2n = 2x = 14) belongs to the family Papilionaceae.

Floral biology :Cluster bean is a self-pollinated crop having about 9 percent maximum natural out crossing. The plants are normally fully fertile, a few semi-sterile ones have also been reported.

Isolation distance :Cluster bean is a self-pollinated crop. Isolation distance of 50 metres for foundation and 25 metres for certified seed is essential.

Sowing :Cluster bean can be sown twice in a year, February - March in Northern plains and December - January in Southern plains.

Seed rate : In order to sow one hectare area about 30-40 kg seed of cluster bean is required.

Nutrition : The yield of cluster bean has been maximum when the crop was applied with 40 kg nitrogen and 60 kg phosphorus per hectare. The application of micronutrient to cluster bean crop proves very beneficial. Two sprays of molybdenum at 0.15 percent at 15 and 30 days after seedlings emergence give better yield.

Botany

The plant is highly cross pollinated due to heteromorphism and bees being the major pollinators.

Varieties: PKM 1 & PKM 2

Method of seed production : Seed to Seed.

Land requirement : Uproot all the wild and non specific moringa trees if any near the field within a radius of 1500ft. Good drainage facility is must for moringa.

Isolation requirement : A distance of at least 500 M is necessary for seed production.

Season : Early season (July August), Mid season (September), Late season (October -November). Best season is September October, so that flowering starts during summer which facilities better pollination and seed set.

Plant breeding is described as an art and science of changing the genetic architecture of plants with a goal towards betterment of mankind. Apart from this generalized concept, plant breeding is accomplished through inter-disciplinary mode assorted from simple selection in a variable plant-population having some desirable traits to the application of biotechnology and more. Worldwide, cultivars of different crops are routinely manufactured by Multinational and National level Industries, Government Institutions, Universities, Crop specific Organizations, professional plant breeders and even by the individuals such as gardeners and farmers.

Plant breeding is basically operated by the principles of Genetics where selections are practiced from a variable population and the selected variation needs to be inherited. Three categorized broad goals of plant breeding are 1) high yield 2) uplift in quality and 3) resistance against biotic and abiotic stress.

Spice crops are known to add nutritive value and increase the palatability as well as quality of food. Therapeutic uses of spices are also well recognised. The spice industry in India and trade has shown stunning progress over the last 5 years with 120% increase in revenue which is very close to touch $ 3 billion. East Asia is the major market for spices, followed by America and the European Union and the world spice trade has almost touched $ 17 billion by 2020. So, increased production is of paramount importance across the world and the potential is increasing. On the other hand, quality improvement is one of the primary objectives of spice crop breeding apart from achieving high yield. Cultivar and species diversity are the principal components of diversity of spices (Sasikumar et al. 1999; Krishnamoorthy et al., 1997; Prasath and Venugopal, 2004). A good amount of variability is found in many important Indian spices like black pepper, cardamom, cinnamon, curry leaf, ginger, garcinia, tamarind and turmeric. A number of cultivars have been released followed by intra-germplasm evaluation and selection in spices. Contribution of recombination breeding is less in spice crops with regard to other field crops and a number of valuable varieties have been bred by clonal and seedling selection (Peter, 2008). Deployment of high yielding, water use efficient, climate resilient genotypes and technologies are also necessary.

Since historical times, Indian spices have been contributed not only to the country’s wealth and prosperity but also to the subcontinent itself as a whole. Spices precisely witnessed many wars, bloodshed, armoury alongwith the glowing accounts and adventurous voyage by Pliny, Ptolemy, Marco Polo, Vasco da Gamma and other travelers. The Southern parts of India, especially the Malabar Coast, with its abundance of the World’s best pepper, cinnamon and ginger was enormously creating impact of a plethora of spices which attracted the foreign trade and continue even today by creating a unique brand value globally. In the past, invaders travelled to India by overcoming many odds and barriers with the prime focus on capturing spice trade and dominating the trade scenario of those days throughout the world. As a result, gradually Indian spices travelled far and wide to traditional destinations by providing flavor, aroma, pungency, taste and colour to a variety of foods and beverages.

It was the end of 18^th century, from when scientific research began on the idea of origin of cultivated plants. The pioneers of this field were Darwin, Alphonse de Candolle, N.I Vavilov and many more. Charles Darwin wrote his famous book ‘On the Origin of Species by Means of Natural Selection’, or the ‘Preservation of Favoured Races in the Struggle for Life’ published on 24^th November 1859. According to him, cultivated plants may have originated from its wild form after a series of intense modifications. Afterwards, a Swiss botanist Alphonse de Candolle studied 247 cultivated plant species and documented his work in the book “Origin of cultivated plants” in 1886. Later, Vavilov first identified the Centres of origin. He could determine the origin of plants by analyzing the pattern of variation and proposed that, crop plants have been evolved from their wild species in the geographic region of the greatest genetic diversity of that particular plant. That area is known as the primary centres of origin of the particular plant. But, some crop species were found to show substantial genetic diversity even though they did not originate there. Such areas are known as secondary centres of origin for that particular species.

Cultivated plants in general including the spice crops observed today have been evolved through selections from their weedy and wild types. Apart from this, there had been another force which could bring the wild forms into cultivated forms named human intervention which is actually the process of domestication. Natural mutations and genetic recombination after selfing and crossing also played a significant role in the entire process. Whereas, natural forces take a long time to come into act, the techniques of plant breeding was devised and fine tuned throughout passing of times, essentially to accelerate the speed of evolution using these natural phenomenons. It was, therefore, mandatory for us to know the modes of reproduction and pollination to create variability in natural population and make all thise happen to what we see today in organised cultivated forms. Moreover, knowledge on reproduction of different plant species helps the breeder to choose the right breeding procedure to be used for crop improvement. Modes of reproduction help to evaluate the genetic constitution of crop plants by determining the extent of homozygosity or heterozygosity which, in turn, are unanimously applicable to any plant. To comprehend modes of reproduction in spice crops effectively, understanding about the floral biology is absolutely necessary. Plant reproduction, a process by which one species gives birth to its offsprings, may be of two types

I. FILL UPS

1. _____ is a technology that eliminates or reduces the germination capacity of the following seed germination.
2. _____ technology offers a means of preventing the unwanted flow of genes from genetically modified organisms.
3. Terminator technology is technically known as _____.
4. _____ technology is used to protect the transgenes from being pirated by researches elsewhere.
5. _____ is a inducer used to initiate the terminator gene interaction.

I. FILL UPS

1. The developing ovule is commonly attached to the placenta by the _____.
2. The scar on the ovule made where the funiculus detaches at maturity is known as the _____.
3. The point where the integuments meet at the nuclear apex is _____.
4. Opposite to the micropyle, the region of integumentary origin and attachment is called _____.
5. Between the chalaza and the hilum is an area called _____.
6. _____ is an example for species with developed perisperm.

I. FILL UPS

1. Ovule moisture content at the time of fertilization is approximately _____.
2. After sexual fusion, the developing seeds begin to _____ in weight as a result of nutrient accumulation.
3. _____ is the precursor substrate for starch formation in a seed.
4. In cereals, the walls of the dead cells of the mature starchy endosperm are composed of _____ and _____.
5. In coffee and ivory nut seeds _____ is deposited in the cell wall.
6. In cereal seeds, proteins are accumulated in the _____ layer.

I. FILL UPS

1. The process whereby seeds sprout and begin to grow is known as _____.
2. During germination of a seed, the water is absorbed through _____.
3. _____ is the onset growth of a seed often following a period of dormancy.
4. _____ is a type of germination in which cotyledons and shoot are carried above the soil level.
5. _____ is a type of germination in which the cotyledon or comparable structure remain in the soil.
6. Water moves into the tissues and cells by _____.

I. FILL UPS

1. _____ is a crossing between two genetically dissimilar parents.
2. Detasseling is done in _____.
3. _____ is an example for chemical hybridizing agent.
4. _____ is called as pollen parent.
5. _____ is the fertile counter part of A line.
6. DUS stand for _____.

I. FILL UPS

1. _____ is the most important source of varietal deterioration during seed production.
2. _____ in oats is caused due to mutation.
3. In peas, _____ is caused due to mutation.
4. _____ is another most important source of varietal deterioration due to introgression to genes from unrelated stocks.
5. _____ is the major source of genetic contamination and varietal deterioration in cross fertilized crop.

Seed processing is specialized activity and also a tool to improve seed quality further to an acceptable standard. Seed quality parameters like germination, vigour or genetic purity can be improved using processing. Say a seed lot having a minimum standard of 90% germination, but the competition in the market offering seed quality 92 or 95 % then to meet the market demand we can process the seed lots using re-milling or re-conditioning techniques. Also sometimes simple techniques like liquid density separation which uses specific density of the seed to separate good seed from inferior quality can be considered.

I. FILL UPS

1. _____ is the progeny of nucleus seed.
2. Genetic purity of breeder seed is _____.
3. Physical purity of breeder seed is _____.
4. The colour of tag for breeder seed is _____.
5. _____ is the progeny of breeder seed.
6. Genetic purity of foundation seed is _____.

The physical properties of seeds are a basic activity for designing processing equipments and precision planters. Since these characters vary with crop or variety, one needs to have the data handy to be used on shop floor. This data also helps to quantify processing efficiency, presence of dormancy and suitability for seed treatments for all existing and new crops or varieties.

I. FILL UPS

1. _____ is a matured ovule usually developed after fertilization.
2. Seed can also be defined as the _____ in resting stage.
3. _____ of seeds refers to the trueness to type.
4. Pure live seed is calculated by _____
5. _____ is the most crucial factor in the maintenance of seed germination and viability during storage.
6. _____ refers to the sum total of all the attributes that give effective plant stand in the field.

I. FILL UPS

1. The Seeds Act was passed in the year _____
2. Seed Control Order was passed in the year _____
3. The New Policy on Seed Development was passed in the year _____
4. Seed Act came into force in _____
5. In _____ year, Seed Rules were formed.
6. In _____ year, Seed Certification Agencies and Central Seed Certification Board were formed.

I. FILL UPS

1. _____ is basically a critical assessment of effective seed requirement.
2. _____ is the ratio of seed yield per seed generation.
3. The quantity of quality seed that have replaced the actual seed requirement of the location is _____.
4. SRR for hybrid seeds is _____
5. Seed multiplication ratio for groundnut _____